Somez Posted February 7, 2016 Share Posted February 7, 2016 Hey guys, How can I enable power nap? I don't see it in the energy saver options. Thanks. Link to comment Share on other sites More sharing options...
Allan Posted February 7, 2016 Share Posted February 7, 2016 Power Nap is available only for supported models. So, if you use a Laptop, you can change your SMBios to MacBookPro10,2. Link to comment Share on other sites More sharing options...
Somez Posted February 7, 2016 Author Share Posted February 7, 2016 Power Nap is available only for supported models. So, if you use a Laptop, you can change your SMBios to MacBookPro10,2. What are the risks for doing it? I've never done this before. Link to comment Share on other sites More sharing options...
Allan Posted February 7, 2016 Share Posted February 7, 2016 All depends of your Hardware specs. And make sure that your Power Management it's completely configured. If you have followed 100% of this guide, maybe you'll don't have problem. But i can't confirm that will work, make sure what you'll do.... Link to comment Share on other sites More sharing options...
Somez Posted February 7, 2016 Author Share Posted February 7, 2016 All depends of your Hardware specs. And make sure that your Power Management it's completely configured. If you have followed 100% of this guide, maybe you'll don't have problem. But i can't confirm that will work, make sure what you'll do.... How can I check if my power management is 100% configured? Thanks. Link to comment Share on other sites More sharing options...
Allan Posted February 7, 2016 Share Posted February 7, 2016 What is your hardware specs? I'll move this conversation for another place, and then we don't mess up @Kogen Mantis's guide. Link to comment Share on other sites More sharing options...
Somez Posted February 7, 2016 Author Share Posted February 7, 2016 What is your hardware specs? I'll move this conversation for another place, and then we don't mess up @Kogen Mantis's guide. Please let me know the new place of this topic so we can continue there My config is obviously a T420 (not i, not s, etc.) Core i5 2520 CPU, 2.5 GHz 4 GB stock RAM Screen is 1600x900 Only HD 3000 GPU SSD + a normal HDD in optibay caddy Is there anything else I need to provide? Obrigado. Link to comment Share on other sites More sharing options...
Allan Posted February 8, 2016 Share Posted February 8, 2016 Good model. Is sad that MB Pro Retina 10.1/2 uses Ivy Bridge and Haswell CPUs. And you have a Sandy Bridge CPU. Yeah, it's a Hackintosh, but if you want...let's try! Link to comment Share on other sites More sharing options...
Somez Posted February 8, 2016 Author Share Posted February 8, 2016 Good model. Is sad that MB Pro Retina 10.1/2 uses Ivy Bridge and Haswell CPUs. Screen Shot 2016-02-07 at 10.06.22 PM.png And you have a Sandy Bridge CPU. Yeah, it's a Hackintosh, but if you want...let's try! Well, I'm not sure If it could break my installation then I would skip. However I'm still interested in how to find out whether my power management is fully configured/functional or not. Can you please give some guidance on this one? Thanks. 1 Link to comment Share on other sites More sharing options...
Manwe150 Posted February 8, 2016 Share Posted February 8, 2016 It should be fine, and is easy to test from the Clover boot GUI. The main things I know it may affect are: 1) the validation of the hardware SMBIOS serial number (probably good to make sure internet / all things apple cloud are disabled for the test) 2) graphics outputs. the number of outputs and their types are tabulated in AppleIntelSNBGraphicsFB.kext and keyed by the model. You might have to update these values after modifying your board-id. For example, see http://www.insanelymac.com/forum/topic/259705-editing-custom-connector-info-for-intel-hd-3000-graphics-sandy-bridge-osx-lion/page-9?do=findComment&comment=1822063 Link to comment Share on other sites More sharing options...
Recommended Posts