Duran Keeley Posted December 8, 2015 Share Posted December 8, 2015 This topic is opened so far: http://www.insanelymac.com/forum/topic/309765-amd-os-x-el-capitan-1011-kernel-testing-release-for-help-use-the-help-topic/ PS: Sorry for not posting when it came out, currently on holiday and the email came while I was visiting some friends 5 Link to comment Share on other sites More sharing options...
gils83 Posted December 9, 2015 Share Posted December 9, 2015 hello Spakk , use Clover min 3320 , El Capitan install no works with Chameleon Link to comment Share on other sites More sharing options...
spakk Posted December 9, 2015 Share Posted December 9, 2015 @Gils, i use Enoch, which works with El Capitan, this is an opcode problem Link to comment Share on other sites More sharing options...
lpukraine Posted December 9, 2015 Share Posted December 9, 2015 @Gils, i use Enoch, which works with El Capitan, this is an opcode problemUse latest enoch. Same error for me too. Upd: Strange, but opcode error and panic was when i used evoreboot kext in extra folder. Now i remove this kext. No opcode error anymore. Boot is very slow and stops here: 2 Link to comment Share on other sites More sharing options...
gils83 Posted December 9, 2015 Share Posted December 9, 2015 use beta Public 07/15 , no final El Capitan reboot cause for error kernel symbol (normal) but lauch xpc works Good Job y2k4u (r2d2) use Clover 3320 3 Link to comment Share on other sites More sharing options...
lpukraine Posted December 9, 2015 Share Posted December 9, 2015 I try to boot from usb install drive. Os version is 10.11.0 But every time boot is stops on this string: hfs: set VeryLowDisk: vol:untitled, freeblks:0, dangerlimit:12 As I understand that this error is related to disk, but I don't have volume with title 'untitled'. So I don't know how to solve this. Link to comment Share on other sites More sharing options...
Shaneee Posted December 9, 2015 Share Posted December 9, 2015 Kernel Panic on "Can't Preform Kext Scan" Think my install was corrupt. Downloading fresh image from App Store to make USB installer. Will report back when done. 1 Link to comment Share on other sites More sharing options...
gils83 Posted December 9, 2015 Share Posted December 9, 2015 hello , @ y2k4u look loading screen video with kabini 5350 APCI problem , no mount osx.base.system.dmg ? or ?? dossier sans titre.zip Link to comment Share on other sites More sharing options...
Shaneee Posted December 9, 2015 Share Posted December 9, 2015 Would this happen because I'm booting 10.11.2 with the kernel built for 10.11.0? Link to comment Share on other sites More sharing options...
gils83 Posted December 9, 2015 Share Posted December 9, 2015 boot rootless=0 or 1 Link to comment Share on other sites More sharing options...
Shaneee Posted December 9, 2015 Share Posted December 9, 2015 boot rootless=0 or 1 You mean CsrActiveConfig ? Link to comment Share on other sites More sharing options...
gils83 Posted December 9, 2015 Share Posted December 9, 2015 euh ? boot flag npci=0x2000 kext-dev-mode=1 rootless=0 or 1 -v -f Link to comment Share on other sites More sharing options...
Shaneee Posted December 9, 2015 Share Posted December 9, 2015 Hmm I though rootless wasn't used anymore. 1 Link to comment Share on other sites More sharing options...
polyzargone Posted December 9, 2015 Share Posted December 9, 2015 And you are correct ! rootless=whatever you want is useless since El Capitan DP3 (or was it DP4 ? Hum… can't remember). CsrActiveConfig=103 (Chameleon) or CsrActiveConfig=0x3 (Clover in RtVariables) is good and also mandatory for everyone now. Oh, and I forgot to say that you need kernel.plist file in Extra folder for Enoch (Chameleon is still not compatible with El Capitan) with this setting (minimum) : <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>KernelBooter_kexts</key> <string>Yes</string> </dict> </plist> 4 Link to comment Share on other sites More sharing options...
gils83 Posted December 9, 2015 Share Posted December 9, 2015 0x28 , is not good ? edit : no change 0x3 or ?? , ok , thanks , the problem is elsewhere Link to comment Share on other sites More sharing options...
Shaneee Posted December 9, 2015 Share Posted December 9, 2015 And you are correct ! rootless=whatever you want is useless since El Capitan DP3 (or was it DP4 ? Hum… can't remember). CsrActiveConfig=103 (Chameleon) or CsrActiveConfig=0x3 (Clover in RtVariables) is good and also mandatory for everyone now. Oh, and I forgot to say that you need kernel.plist file in Extra folder for Enoch (Chameleon is still not compatible with El Capitan) with this setting (minimum) : <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>KernelBooter_kexts</key> <string>Yes</string> </dict> </plist> No matter what I enter for Enoch it loads 0x01 and I'm getting the same error. Clover won't work at all for me. Will keep trying. Link to comment Share on other sites More sharing options...
polyzargone Posted December 9, 2015 Share Posted December 9, 2015 0x28 is BooterConfig and I don't know what's its purpose yet. The only important one is CsrActiveConfig value which must be at least 0x1 or 0x67. More info here . @Shaneee Do you have this in org.chameleon.Boot.plist ? : <key>CsrActiveConfig</key> <string>103</string> CsrActiveConfig=103 won't work . Link to comment Share on other sites More sharing options...
gils83 Posted December 9, 2015 Share Posted December 9, 2015 in the bed , tomorrow job at 4h30 good bye Link to comment Share on other sites More sharing options...
Shaneee Posted December 9, 2015 Share Posted December 9, 2015 0x28 is BooterConfig and I don't know what's its purpose yet. The only important one is CsrActiveConfig value which must be at least 0x1 or 0x67. More info here . @Shaneee Do you have this in org.chameleon.Boot.plist ? : <key>CsrActiveConfig</key> <string>103</string> CsrActiveConfig=103 won't work . Yes I do. I'm trying fresh again, <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>CrsActiveConfig</key> <string>103</string> <key>Kernel Flags</key> <string>-v npci=0x3000</string> <key>GraphicsEnabler</key> <string>Yes</string> <key>USBLegacyOff</key> <string>Yes</string> </dict> </plist> Link to comment Share on other sites More sharing options...
Mr. Xtreme Posted December 9, 2015 Share Posted December 9, 2015 I made an install drive with Createinstallmedia and I have the amd kernel in /Extra/Kernels/kernel and I boot with the neccasary bootflags for my machine + /Extra/Kernels/kernel but it doesn't seem to boot the amd kernel and reboots I'm using the latest enoch with csractive. Link to comment Share on other sites More sharing options...
jaylex Posted December 9, 2015 Share Posted December 9, 2015 Welcome to AMD El Capitan. Booted with no errors. AMD Athlon II X2 215 Screen Shot 2015-12-09 at 22.03.56.png Backing up now to install to my main partition How? Link to comment Share on other sites More sharing options...
Shaneee Posted December 9, 2015 Share Posted December 9, 2015 How? 10.11.0 Installer. Kernel from first page and Enoch r2795 with my boot.plist above here, http://www.insanelymac.com/forum/topic/309765-amd-os-x-el-capitan-1011-kernel-testing-release-for-help-use-the-help-topic/?p=2195507 And a little patience 4 Link to comment Share on other sites More sharing options...
jaylex Posted December 9, 2015 Share Posted December 9, 2015 10.11.0 Installer. Kernel from first page and Enoch r2795 with my boot.plist above here, http://www.insanelymac.com/forum/topic/309765-amd-os-x-el-capitan-1011-kernel-testing-release-for-help-use-the-help-topic/?p=2195507 And a little patience Can I still download the 10.11.0 from the store because I thought that there's a new version? Link to comment Share on other sites More sharing options...
polyzargone Posted December 9, 2015 Share Posted December 9, 2015 Can I still download the 10.11.0 from the store because I thought that there's a new version? I don't think so. Apple usually post the latest version on the MAS. You'll end up with a 10.10.2 10.11.2 version for sure. That said, I'm pretty sure it will still work with this version (I'm currently installing 10.11.1 on my system ). Give it a try ! 2 Link to comment Share on other sites More sharing options...
Shaneee Posted December 9, 2015 Share Posted December 9, 2015 I'm currently downloading the 10.11.2 combo to install on my secondary El Cap install to see what happens. Will let you all know. 1 Link to comment Share on other sites More sharing options...
Recommended Posts