spakk Posted December 22, 2016 Author Share Posted December 22, 2016 Prelinked kernel failed, use/install USB-FIX v3 for El Capitan and follow the instructions! Instruction and download-link: www.insanelymac.com/forum/files/file/521-usb-fix-for-el-capitan/ Then your system will boot successfully! Link to comment Share on other sites More sharing options...
software123 Posted December 25, 2016 Share Posted December 25, 2016 Hi Spakk, Thanks for helping me, this is my ELC 10.10 OS X Kernel flags used were PCIRootUID=1 GraphicsEnabler=Yes UseKernelCache=Yes npci=0x3000 -v Reboot & Shutdown - No issue Lan - Not Working Audio - Not Working Later I will try for Lan & Audio. Thanks again. Link to comment Share on other sites More sharing options...
spakk Posted December 25, 2016 Author Share Posted December 25, 2016 Hi Spakk, Thanks for helping me, this is my ELC 10.10 OS X Kernel flags used were PCIRootUID=1 GraphicsEnabler=Yes UseKernelCache=Yes npci=0x3000 -v Reboot & Shutdown - No issue Lan - Not Working Audio - Not Working Later I will try for Lan & Audio. Thanks again. Ethernet card (LAN Realtek® 8112L, RTL81***): Use either the Driver from Mieze, for Realtek RTL8111 Http://www.insanelymac.com/forum/topic/287161-new-driver-for-realtek-rtl8111/ or use the Lnx2Mac's Realtek RTL81xx Driver Http://lnx2mac.blogspot.de/p/realtekrtl81xx-osx-driver.html These are your hardware specs for M4A88T-M LE: M4A88T-M LE • CPU AMD AM3 Phenom™ II/Athlon™ II/Sempron™ 100 Series Processors • Supports AM3 45 nm CPU • Supports CPU up to 125 W • AMD Cool 'n' Quiet™ Technology • Chipset AMD 880G/SB710 • Memory 2 x DIMM, Max. 8GB, DDR3 1866(O.C.)/1333/1066 MHz ECC, Non-ECC, Un-buffered Memory • Dual Channel Memory Architecture • * Refer to www.asus.com or user manual for the Memory QVL (Qualified Vendors Lists). • * Due to OS limitation, when installing total memory of 4GB capacity or more, Windows® 32-bit operation system may only recognize less than 3GB. Install a 64-bit Windows® OS when you want to install 4GB or more memory on the motherboard. • * AMD AM3 100 and 200 series CPU support up to DDR3 1066MHz. • System Bus Up to 5.2 GT/s HyperTransport™ 3 • Graphic Integrated ATI Radeon™ HD 4250 GPU • Multi-VGA output support : HDMI/DVI/RGB ports • - Supports HDMI with max. resolution 1920 x 1080 @ 60 Hz • - Supports DVI with max. resolution 2560 x 1600 @ 60 Hz • - Supports RGB with max. resolution 2048 x 1536 @ 85 Hz • Maximum shared memory of 1024 MB • Dual independent displays support with HDMI/DVI and D-Sub • Hardware Decode Acceleration for H.264, VC-1, and MPEG-2 • Blu-ray playback support *1 • Supports DirectX 10.1, OpenGL 2.0, Shader Model 4.1, Universal Video Decoder (UVD) 2.0 • Multi-GPU Support Supports AMD CrossFireX™ Technology • Expansion Slots 1 x PCIe 2.0 x16 • 2 x PCIe 2.0 x1 • 1 x PCI • Storage AMD SB710 controller : • 1 x UltraDMA 133/100/66 for up to 2 PATA devices , blue • 6 x SATA 3Gb/s port(s), navy blue • Support Raid 0, 1, 10, JBOD • LAN Realtek® 8112L, 1 x Gigabit LAN Controller(s), featuring AI NET2 • Audio Realtek® ALC887 8-Channel High Definition Audio CODEC *2 • - Supports : Jack-detection, Multi-streaming, Front Panel Jack-retasking • Audio Feature : • - Optical S/PDIF out port(s) at back panel • USB Ports Built-in Controller : • 12 x USB port(s) (6 at back panel, black, 6 at mid-board) • ROG Exclusive Features Overclocking Protection : • - ASUS C.P.R.(CPU Parameter Recall) • Special Features ASUS Power Design : • - ASUS EPU-4 Engine • Turbo Key • TurboV • Core Unlocker • Auto Tuning *3 • GPU NOS • ASUS Exclusive Features : • - Anti-Surge • ASUS Quiet Thermal Solution : • - Stylish Fanless Design Heat-sink solution • - ASUS Q-Fan • ASUS EZ DIY : • - ASUS O.C. Profile • - ASUS CrashFree BIOS 3 • - ASUS EZ Flash 2 • - ASUS MyLogo 2 • 100% All High-quality Conductive Polymer Capacitors • Back I/O Ports 1 x PS/2 keyboard/mouse combo port(s) • 1 x DVI • 1 x D-Sub • 1 x HDMI • 1 x LAN (RJ45) port(s) • 6 x USB 2.0 • 1 x Optical S/PDIF out • 3 x Audio jack(s) • Internal I/O Ports 3 x USB 2.0 connector(s) support(s) additional 6 USB 2.0 port(s) • 1 x IDE connector(s) • 1 x COM port(s) connector(s) • 6 x SATA 3Gb/s connector(s) • 1 x CPU Fan connector(s) • 1 x Chassis Fan connector(s) • 1 x S/PDIF out header(s) • 1 x 24-pin EATX Power connector(s) • 1 x 4-pin ATX 12V Power connector(s) • 1 x parallel port connector(s) • 1 x Front panel audio connector(s) (AAFP) • 1 x System panel(s) • Accessories User's manual • I/O Shield • 1 x UltraDMA 133/100 cable(s) • 2 x SATA 3Gb/s cable(s) • BIOS 16 Mb Flash ROM , AMI BIOS, PnP, DMI2.0, WfM2.0, SM BIOS 2.5, ACPI 2.0a, ASUS EZ Flash 2, ASUS CrashFree BIOS 3 If you are looking for drivers for your hardware, then search for them by using the hardware VENDOR-ID and DEVICE-ID of your built-in hardware. This information can you found by using of DPCI-Manager.app or systemInfo.app Auido (Audio Realtek® ALC887): Audio can be done by patching the AppleHDA.kext, which you have to try accordingly, or by installing an alternative driver Audio driver "VoodooHDA.kext" Otherwise by using an external USB Sound Interface card / USB sound card (purchase price from 5 Euro upwards) 1 Link to comment Share on other sites More sharing options...
Vexo Posted January 30, 2017 Share Posted January 30, 2017 Hi guys i succesfully booted in the installer of 10.11.6 with shaneee rc4 kernel but i got stuck at the beginning of the installation process (17 minutes) anyone can help? thanks in advice UPDATE (SOLVED) i solved my problem by changing the date with the terminal https://bensmann.no/changing-system-date-from-terminal-os-x-recovery/ Link to comment Share on other sites More sharing options...
Vexo Posted January 30, 2017 Share Posted January 30, 2017 Hey guys i've installed El capitan 10.11.6 on my system but after the installation i can't boot into el capitan , after the grey verbose mode it reboots. do i need to replace the kernel in the el capitan hard drive? For the flashable usb i did everything usb fix/replaced kernel/extra folder etc My system: AMD FX 6300 GTX 970 Gigabyte 990-fxa ud5 8gb ram corsair vengance please help me i don't now what to do Link to comment Share on other sites More sharing options...
Shaneee Posted January 31, 2017 Share Posted January 31, 2017 Hey guys i've installed El capitan 10.11.6 on my system but after the installation i can't boot into el capitan , after the grey verbose mode it reboots. do i need to replace the kernel in the el capitan hard drive? For the flashable usb i did everything usb fix/replaced kernel/extra folder etc My system: AMD FX 6300 GTX 970 Gigabyte 990-fxa ud5 8gb ram corsair vengance please help me i don't now what to do Boot with -v UseKernelCache=No nv_disable=1 1 Link to comment Share on other sites More sharing options...
Vexo Posted January 31, 2017 Share Posted January 31, 2017 Boot with -v UseKernelCache=No nv_disable=1Thanks now i am on a fully working 10.12.3 with clover but if i have 2 hard drives connected to my pc the bootloader switch from clover to enoch Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk Link to comment Share on other sites More sharing options...
Shaneee Posted January 31, 2017 Share Posted January 31, 2017 Thanks now i am on a fully working 10.12.3 with clover but if i have 2 hard drives connected to my pc the bootloader switch from clover to enoch Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk Set the drive with Clover as the first boot device in your BIOS. 1 Link to comment Share on other sites More sharing options...
Vexo Posted January 31, 2017 Share Posted January 31, 2017 Set the drive with Clover as the first boot device in your BIOS.Already did Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk Link to comment Share on other sites More sharing options...
Shaneee Posted January 31, 2017 Share Posted January 31, 2017 Was Enoch installed to the ESP? If so then just reinstall Clover also to the ESP and it should replace Enoch. Link to comment Share on other sites More sharing options...
Z4mp4n0 Posted March 23, 2017 Share Posted March 23, 2017 Hello guys! Thanks to your combined efforts, I have finally managed to run El Capitan on my Phenom II X6 AMD PC! It runs pretty great, apart from two types of applications crashes: 1) Crashes related to AppleJPEG, usually involving the instruction "vSymmetricOctilePolynomial_PlanarF_WithTable" (at least one other user on this thread has had these crashes), which affect apps like Contacts (when changing picture), Quicklook (when viewing raw images), SafariWebContent (on some sites) and sadly Lightroom (when switching to Develop mode). 2) Crossplatform apps written using the Qt5 framework (eg enPass, Synergy) crash seemingly around the instruction "qDetectCpuFeatures()" (Maybe I can somehow spoof this information? "About this Mac" lists processor as unknown, also I had these crashes on Yosemite as well) Do you have these issues too? Is there anything I can do, or I should just accept them as my AMD Hackintosh quirks? I am running Shaneee's 10.11.x-RC4 kernel, I've tried all the other ones here, this one works best. I'm willing to provide whatever info you want about my setup and test any modifications you suggest! Thank you very much! Link to comment Share on other sites More sharing options...
rictec Posted April 8, 2017 Share Posted April 8, 2017 hello guys i recently replaced the motherboard with a M5A78L-M with a AMD FX 6300 six core cpu .. was surprised it even booted from the one i have on the signature ..now can JSL or anyone with this config provide info about kernel and settings for this board? usb throw a lot of messages..eventually mouse worked have some icons on the screen that are green.. running 10.11.4 and cpu say unknown thank you usimg this kernel:Darwin rictecs-Mac-Pro 15.0.0 Darwin Kernel Version 15.0.0: четверг, 10 декабря 2015 г. 13:39:45 (MSK); root:xnu-3247.1.106/BUILD/obj/RELEASE_X86_64 x86_64 Link to comment Share on other sites More sharing options...
jsl Posted April 8, 2017 Share Posted April 8, 2017 hello guys i recently replaced the motherboard with a M5A78L-M with a AMD FX 6300 six core cpu .. was surprised it even booted from the one i have on the signature ..now can JSL or anyone with this config provide info about kernel and settings for this board? usb throw a lot of messages..eventually mouse worked have some icons on the screen that are green.. running 10.11.4 and cpu say unknown thank you usimg this kernel:Darwin rictecs-Mac-Pro 15.0.0 Darwin Kernel Version 15.0.0: четверг, 10 декабря 2015 г. 13:39:45 (MSK); root:xnu-3247.1.106/BUILD/obj/RELEASE_X86_64 x86_64 Because FX hackintosh still suffered from glichy icons issue up to now, I'll advise you installing 10.12GM or 10.12.4Final version for your FX-6300 & M5A MB. Please search what I have posted for AMD 10.12.x in this website. During installation maybe you need disable USB 2 (EHCI) at BIOS before you fix it after installation. 1 Link to comment Share on other sites More sharing options...
rictec Posted April 11, 2017 Share Posted April 11, 2017 Because FX hackintosh still suffered from glichy icons issue up to now, I'll advise you installing 10.12GM or 10.12.4Final version for your FX-6300 & M5A MB. Please search what I have posted for AMD 10.12.x in this website. During installation maybe you need disable USB 2 (EHCI) at BIOS before you fix it after installation. hello thank you for the info jsl i managed to get 10.12 up and running had some problems with geforce 950 but solved it with 14.2 smbios everything is working now thank you Link to comment Share on other sites More sharing options...
AkimoA Posted April 30, 2017 Share Posted April 30, 2017 Just an fyi in general the latest bronya (el capo ryzen) kernel / Enoch 2877 works also fine with 10.11.6 on my very old AMD 9550 Phenom . no fakesmc ,no nullcpu , basicly no kexts used except the EHCI Dummy for USB , sound not tested couldnt be bothered yet no glitchy icons , artefacts etc . (my test screen is only an old 15 inch vga therefore screeny is a bit tight ) 4 Link to comment Share on other sites More sharing options...
ydeng Posted April 30, 2017 Share Posted April 30, 2017 Just an fyi in general the latest bronya (el capo ryzen) kernel / Enoch 2877 works also fine with 10.11.6 on my very old AMD 9550 Phenom . no fakesmc ,no nullcpu , basicly no kexts used except the EHCI Dummy for USB , sound not tested couldnt be bothered yet no glitchy icons , artefacts etc . (my test screen is only an old 15 inch vga therefore screeny is a bit tight ) What is USB EHCI dummy? Link to comment Share on other sites More sharing options...
spakk Posted April 30, 2017 Author Share Posted April 30, 2017 What is USB EHCI dummy? http://www.insanelymac.com/forum/files/file/521-usb-fix-for-macos/?st=30#commentsStart 1 Link to comment Share on other sites More sharing options...
Samanosuke Posted May 10, 2017 Share Posted May 10, 2017 (edited) Hi every one i used this kernel and installed successfully on AMD FX 8350 ,sound,Ethernet, Nvidia 750ti,usb,all working,but Fcpx crashing and the error msg is final cut pro quit unexpectedly while using cl_kernels plug-in and Adobe Photoshop cc are keep on troubling..i attache the Screen shots and logs here pls help me AsAp.. Process: Adobe Photoshop CC 2017 [378]Path: /Applications/Adobe Photoshop CC 2017/Adobe Photoshop CC 2017.app/Contents/MacOS/Adobe Photoshop CC 2017Identifier: com.adobe.PhotoshopVersion: 18.0.0 (18.0.0.53)Code Type: X86-64 (Native)Parent Process: ??? [1]Responsible: Adobe Photoshop CC 2017 [378]User ID: 501Date/Time: 2017-05-10 15:49:51.242 +0530OS Version: Mac OS X 10.11.5 (15F34)Report Version: 11Anonymous UUID: 1B84B1B3-3C60-F1C5-0AC3-2E021C89E488Time Awake Since Boot: 290 secondsSystem Integrity Protection: disabledCrashed Thread: 0 Dispatch queue: com.apple.main-threadException Type: EXC_BAD_ACCESS (SIGSEGV)Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000008Exception Note: EXC_CORPSE_NOTIFYVM Regions Near 0x8:-->__TEXT 0000000100f43000-0000000107759000 [104.1M] r-x/rwx SM=COW /Applications/Adobe Photoshop CC 2017/Adobe Photoshop CC 2017.app/Contents/MacOS/Adobe Photoshop CC 2017Global Trace Buffer (reverse chronological seconds):2.592938 CFNetwork 0x00007fff9d9763a4 NSURLConnection finished with error - code -10092.593069 CFNetwork 0x00007fff9d98547d HTTP load failed (error code: -1009 [12:8])2.593105 CFNetwork 0x00007fff9d9cc21d _CFNetworkIsConnectedToInternet returning 0, flagsValid: 1, flags: 0x02.593357 CFNetwork 0x00007fff9d8b5fde TCP Conn 0x7fc40101da40 Failed : error 0:-65554 [-65554]2.593357 CFNetwork 0x00007fff9d8b5c71 TCP Conn 0x7fc40101da40 complete. fd: -1, err: -655542.593450 CFNetwork 0x00007fff9d94454b TCP Conn 0x7fc40101da40 event 3. err: -655542.594871 CFNetwork 0x00007fff9d8b4f43 TCP Conn 0x7fc40101da40 started2.649193 CFNetwork 0x00007fff9d878bc6 Creating default cookie storage with process/bundle identifier2.649198 CFNetwork 0x00007fff9d878b5e Faulting in CFHTTPCookieStorage singleton2.649198 CFNetwork 0x00007fff9d8789ed Faulting in NSHTTPCookieStorage singletonThread 0 Crashed:: Dispatch queue: com.apple.main-thread0 com.adobe.Photoshop 0x00000001010d5259 0x100f43000 + 16471931 com.adobe.Photoshop 0x00000001020a7362 0x100f43000 + 182362582 com.adobe.Photoshop 0x00000001020a81e5 0x100f43000 + 182399733 com.adobe.Photoshop 0x00000001020a8075 0x100f43000 + 182396054 com.adobe.Photoshop 0x00000001020a95ac 0x100f43000 + 182450365 com.adobe.Photoshop 0x000000010206c3f3 0x100f43000 + 179947396 com.adobe.Photoshop 0x0000000102096a33 0x100f43000 + 181683717 com.adobe.Photoshop 0x00000001015235d3 0x100f43000 + 61618758 com.adobe.Photoshop 0x00000001014ac3d8 0x100f43000 + 56739449 com.adobe.Photoshop 0x000000010108772a 0x100f43000 + 132893810 com.adobe.Photoshop 0x0000000101086e2f 0x100f43000 + 132663911 com.adobe.Photoshop 0x0000000101087100 0x100f43000 + 132736012 com.adobe.Photoshop 0x0000000101087100 0x100f43000 + 132736013 com.adobe.Photoshop 0x0000000101087100 0x100f43000 + 132736014 com.adobe.Photoshop 0x0000000101087100 0x100f43000 + 132736015 com.adobe.Photoshop 0x0000000102e6074b 0x100f43000 + 3262650716 com.adobe.Photoshop 0x0000000102e60929 0x100f43000 + 3262698517 com.apple.AppKit 0x00007fff99dfccd2 -[NSView _drawRect:clip:] + 362618 com.apple.AppKit 0x00007fff99e54cad -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 187319 com.apple.AppKit 0x00007fff99dfa3fb -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:topView:] + 83820 com.apple.AppKit 0x00007fff99df7feb -[NSView _displayRectIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:] + 244921 com.apple.AppKit 0x00007fff99df33f5 -[NSView displayIfNeeded] + 195022 com.adobe.Photoshop 0x00000001010105ab 0x100f43000 + 84113123 com.adobe.Photoshop 0x0000000101c4baf0 0x100f43000 + 1366705624 com.adobe.Photoshop 0x0000000101088cbb 0x100f43000 + 133445925 com.adobe.Photoshop 0x0000000101088abd 0x100f43000 + 133394926 com.adobe.Photoshop 0x0000000101088abd 0x100f43000 + 133394927 com.adobe.Photoshop 0x0000000101088abd 0x100f43000 + 133394928 com.adobe.Photoshop 0x0000000101088abd 0x100f43000 + 133394929 com.adobe.Photoshop 0x0000000101088abd 0x100f43000 + 133394930 com.adobe.Photoshop 0x0000000101088abd 0x100f43000 + 133394931 com.adobe.Photoshop 0x0000000101088abd 0x100f43000 + 133394932 com.adobe.Photoshop 0x0000000101088abd 0x100f43000 + 133394933 com.adobe.Photoshop 0x00000001010a0bdd 0x100f43000 + 143254134 com.adobe.Photoshop 0x0000000102666938 0x100f43000 + 2426296835 com.adobe.Photoshop 0x0000000100fe26e0 0x100f43000 + 65302436 com.adobe.Photoshop 0x0000000101b92520 0x100f43000 + 1290780837 com.adobe.Photoshop 0x0000000100fe0cb0 0x100f43000 + 64632038 com.adobe.Photoshop 0x0000000102e6185a 0x100f43000 + 3263087439 com.adobe.Photoshop 0x0000000102e6271c 0x100f43000 + 3263465240 com.apple.AppKit 0x00007fff9a4673c9 -[NSWindow _handleMouseDownEvent:isDelayedEvent:] + 632241 com.apple.AppKit 0x00007fff9a4683ad -[NSWindow _reallyS Full Crash log see my attachments help me pls Edit by spakk: add longer messages into the spoiler, please Adobe crash.rtf Edited May 11, 2017 by spakk Link to comment Share on other sites More sharing options...
Ewel Posted August 7, 2017 Share Posted August 7, 2017 Hi. is there a kernel that works on the very old Phenom II x4 940 BE? I've searched the thread but I can only see newer cpus.Specifically for 10.11.6. Link to comment Share on other sites More sharing options...
spakk Posted August 7, 2017 Author Share Posted August 7, 2017 Hi. is there a kernel that works on the very old Phenom II x4 940 BE? I've searched the thread but I can only see newer cpus. Specifically for 10.11.6. For Phenom II x4 940 BE you can use an older amd kernel for your cpus. try one of the last kernels either from bronya, Shane or an kernel from me, these kernels are stored somewhere here. Unfortunately, all the test-kernels are scattered here in the threads, navigate some pages back side, then you will find the kernels and their test reports. For Sierra there are unfortunately no executable kernels for older amd cpus without SSE4.1/.2 instructions. Edit: Do not use a kernel for FX CPU, these is not compatible with your CPU Link to comment Share on other sites More sharing options...
Mrs5788 Posted August 11, 2017 Share Posted August 11, 2017 Here's my kernel updated with new sources. Works on all AMD CPUs but with FX bug present. Helper tools now function as they should too. Download here AMD Althon x4 641 Install 10.11.6 which kernel used to Link to comment Share on other sites More sharing options...
XLNC Posted October 2, 2017 Share Posted October 2, 2017 Is the fx graphical glitch still there? coz few people with fx cpu ‘s doesnt seems to get any icon glitches etc ? Link to comment Share on other sites More sharing options...
zerking Posted October 9, 2017 Share Posted October 9, 2017 the problem is still there, no fix for that! Move on to 10.12 or 13 then! Link to comment Share on other sites More sharing options...
sembrex Posted October 18, 2017 Share Posted October 18, 2017 i wanna try el-capitan on my ryzen. which kernel should i use? Link to comment Share on other sites More sharing options...
spakk Posted October 20, 2017 Author Share Posted October 20, 2017 i wanna try el-capitan on my ryzen. which kernel should i use? use the pages where Ryzen kernel is treated (here on insaneleymac) then you will find various kernels for Ryzen CPU (by bronya) Link to comment Share on other sites More sharing options...
Recommended Posts