Mr. Xtreme Posted January 12, 2016 Share Posted January 12, 2016 Spakk, i waited for over an hour the i was on the same loop. I then added USBBusFix=Yes along with my other flags that i used for yosemite and i was finally on the installation screen . Installation started but got stuck at 16 minutes remaining. Error log : UnicodeRange = "<__NSCFCharacterSet: 0x7fe26c5d3940>"; Mac-Pro Unknown[439]: name = NotoSansBuhid; Mac-Pro Unknown[439]: }, Mac-Pro Unknown[439]: { Mac-Pro Unknown[439]: UnicodeRange = "<__NSCFCharacterSet: 0x7fe26c5d39f0>"; Mac-Pro Unknown[439]: name = NotoSansHanunoo; This kept on repeating.. I had that on my intel hack, I just gave it 20+ minutes and bingo! El Cappy was installed. 1 Link to comment Share on other sites More sharing options...
spakk Posted January 12, 2016 Author Share Posted January 12, 2016 I have found the solution to our USB2.0 and USB3.0 problem! Edit: a description and drivers upload, in a few minutes 3 Link to comment Share on other sites More sharing options...
Mr. Xtreme Posted January 12, 2016 Share Posted January 12, 2016 I have found the solution to our USB2.0 and USB3.0 problem! Arg, I hate cliffhangers. Please enlighten us Spakk 1 Link to comment Share on other sites More sharing options...
spakk Posted January 12, 2016 Author Share Posted January 12, 2016 sh_it system has crashed. The problem I have since update of 10.11.3 to 10.11.4. It will take a little. The solution is so simple and should work on any hackintosh. remove these drivers from /System/Library/Extensions/ ==> "IOUSBFamily.kext, IOUSBMassStorageDriver.kext, IOUSBMassStorageClass.kext" or rename all in *bak. Then install the USB Fix El Capitan package, fix the permissions and renew kernel cache, and reboot and be happy. the other adjustments can make our programmers. Please test and report USB-Fix El_Capitan.zip 6 Link to comment Share on other sites More sharing options...
Op15L Posted January 12, 2016 Share Posted January 12, 2016 sh_it system has crashed. The problem I have since update of 10.11.3 to 10.11.4. It will take a little. The solution is so simple and should work on any hackintosh. remove these drivers from /System/Library/Extensions/ ==> "IOUSBFamily.kext, IOUSBMassStorageDriver.kext, IOUSBMassStorageClass.kext" or rename all in *bak. Then install the USB Fix El Capitan package, fix the permissions and renew kernel cache, and reboot and be happy. the other adjustments can make our programmers. Please test and report in my pc doesn't works Link to comment Share on other sites More sharing options...
spakk Posted January 12, 2016 Author Share Posted January 12, 2016 in my pc doesn't works if it did not work, then I would that not upload here. fix the permissions and refresh the cache then boot with: npci=0x2000 / or npci=0x3000 usekernelcache=no -v -f (with Nvidia Graphics: nv_disable=1 or nv_drive=1) Link to comment Share on other sites More sharing options...
Shaneee Posted January 12, 2016 Share Posted January 12, 2016 As a side note, this is how I repair my kernelcache ect, sudo chown root:admin / sudo kextcache -system-prelinked-kernel sudo kextcache -system-caches 1 Link to comment Share on other sites More sharing options...
bennington111 Posted January 12, 2016 Share Posted January 12, 2016 sh_it system has crashed. The problem I have since update of 10.11.3 to 10.11.4. It will take a little. The solution is so simple and should work on any hackintosh. remove these drivers from /System/Library/Extensions/ ==> "IOUSBFamily.kext, IOUSBMassStorageDriver.kext, IOUSBMassStorageClass.kext" or rename all in *bak. Then install the USB Fix El Capitan package, fix the permissions and renew kernel cache, and reboot and be happy. the other adjustments can make our programmers. Please test and report Not work for me. DummyUSBEHCIPCI.kext and GenericUSBXHCI.kext need delete? I boot with flag -f, rebuild cache. Link to comment Share on other sites More sharing options...
spakk Posted January 12, 2016 Author Share Posted January 12, 2016 Remove all dummy drivers from /Extra/Extensions / ,. sory that I forgot to mention. This is logical. so looks the contents of my Extra/Extensions folder, see pic Link to comment Share on other sites More sharing options...
bennington111 Posted January 12, 2016 Share Posted January 12, 2016 Remove all dummy drivers from /Extra/Extensions / ,. sory that I forgot to mention. This is logical. so looks the contents of my Extra/Extensions folder, see pic IOUSBHostFamily.kext original or this? Link to comment Share on other sites More sharing options...
spakk Posted January 12, 2016 Author Share Posted January 12, 2016 can no one else confirm that it works. possibly to the processing of my DSDT? I dont know. previously I could respectively connect only one external drive, and now I can connecting all external drive and everything work. IOUSBHostFamily.kext original or this? No, only the two drivers from the package. Link to comment Share on other sites More sharing options...
Op15L Posted January 12, 2016 Share Posted January 12, 2016 Without dummy work usb with keyboard and usb storage but not yet with mouse Link to comment Share on other sites More sharing options...
spakk Posted January 12, 2016 Author Share Posted January 12, 2016 I wonder what changes I have made in my dsdt.aml, and why the two drivers have made on my system these changes so that all my USB ports work. I will now boot without dsdt, then I will report. Link to comment Share on other sites More sharing options...
bennington111 Posted January 12, 2016 Share Posted January 12, 2016 Yeahhhhhhhhhhh!!! Usb works!!! @spakk you best of the best. Front ports work fine. Rear port connected usb 2.0 web cam. Cam work, but microphone not detected. Remains fix graphics bugs. 1 Link to comment Share on other sites More sharing options...
spakk Posted January 12, 2016 Author Share Posted January 12, 2016 yes , I have just tested its work without dsdt!! Link to comment Share on other sites More sharing options...
spakk Posted January 12, 2016 Author Share Posted January 12, 2016 Me too on 2011-3 Mac-pro 6.1 (with dsdt) i try later on 1150 imac 14.2 boot without dsdt! 1 Link to comment Share on other sites More sharing options...
spakk Posted January 12, 2016 Author Share Posted January 12, 2016 I've tested only with Enoch Link to comment Share on other sites More sharing options...
spakk Posted January 12, 2016 Author Share Posted January 12, 2016 It looks fine. Link to comment Share on other sites More sharing options...
Lathos Posted January 12, 2016 Share Posted January 12, 2016 @spakk can the solution/fix be applied in the installer usb stick? Link to comment Share on other sites More sharing options...
spakk Posted January 13, 2016 Author Share Posted January 13, 2016 I've tested the USB fix package with USB 3.0 GenericUSBXHCI.kext (latest version) it works fine, but remove these drivers from /Extra/Extensions/ : DummyUSBEHCIPCI.kext DummyUSBXHCIPCI.kext FakePCIID_XHCIMux.kext FakePCIID.kext USB_Series8_Injector.kext USB_Series9_Injector.kext USBInjectAll.kext @spakk can the solution/fix be applied in the installer usb stick? what does not work? Link to comment Share on other sites More sharing options...
Lathos Posted January 13, 2016 Share Posted January 13, 2016 I've tested the USB fix package with USB 3.0 GenericUSBXHCI.kext (latest version) it works fine, but remove these drivers from /Extra/Extensions/ : DummyUSBEHCIPCI.kext DummyUSBXHCIPCI.kext FakePCIID_XHCIMux.kext FakePCIID.kext USB_Series8_Injector.kext USB_Series9_Injector.kext USBInjectAll.kext what does not work? without patched IOUsb I get the infinite loop and I cannot get to installer with your fix i get "Still Waiting For Root device". Link to comment Share on other sites More sharing options...
spakk Posted January 13, 2016 Author Share Posted January 13, 2016 without patched IOUsb I get the infinite loop and I cannot get to installer with your fix i get "Still Waiting For Root device". with or without dsdt? Link to comment Share on other sites More sharing options...
Lathos Posted January 13, 2016 Share Posted January 13, 2016 with or without dsdt? without dsdt ,using enoch and latest GenericUsb kext Link to comment Share on other sites More sharing options...
spakk Posted January 13, 2016 Author Share Posted January 13, 2016 look into your mailbox 1 Link to comment Share on other sites More sharing options...
whale97 Posted January 13, 2016 Share Posted January 13, 2016 Hi Guys,I managed to try Shaneee's method of creating a USB for el cap on AMD. But for some reason it is not booting on my system.The prep for the USB had been done in VMWare since I do not have a pre-existing hackintosh machine or a MacBook etc..All I get is the following on screen, followed by a reboot:boot0:GPT boot0:DoneAny ideas?My specsMobo: AsRock fm2a88m-hd+ MotherboardCPU: AMD A8-6600kRAM: 16GB DDR3-1600 Crucial Ram GPU: EVGA nVidia GeForce GT740 SCStorage: 2x1tb Drives w/ 120GB SSD.OS: Windows 10 Pro x64 Link to comment Share on other sites More sharing options...
Recommended Posts