steparab Posted January 10, 2016 Share Posted January 10, 2016 Hi ! Yes , this secret problem for green icon on FX )) On intel no problem with icon ! Ok , i use this hdd from intel and insert's in AMD ! Also nope problem for icon ! But if i install driver and reboot , i get now problem icon green ! Ok i use this hdd from AMD and insert in INTEL ! And i start El_Captain and i see - don't works system , i get desktop , but don't works Finder and Dock ! This strange ! Maybe this secret preferences in system ? )) If Bronya managed to boot with correct icons on fx and after a driver installation icons broke.Perhaps the problem is in CACHE maybe FX cpus can't rebuild/complie icon caches correctly. Link to comment Share on other sites More sharing options...
bennington111 Posted January 10, 2016 Share Posted January 10, 2016 Try using the -emulateintel boot flag. Does not work, unknown processor. Link to comment Share on other sites More sharing options...
bennington111 Posted January 10, 2016 Share Posted January 10, 2016 Update El capitan to 10.11.3 beta 15D13b, but graphics bugs same. Link to comment Share on other sites More sharing options...
boyriot Posted January 10, 2016 Share Posted January 10, 2016 Why did you remove the CPU Power Management kext? AppleIntelCPUPowerManagement.kext can cause sound problem in my machine. Link to comment Share on other sites More sharing options...
Codinger Posted January 10, 2016 Share Posted January 10, 2016 AppleIntelCPUPowerManagement.kext can cause sound problem in my machine.What Method of sound activation Link to comment Share on other sites More sharing options...
boyriot Posted January 10, 2016 Share Posted January 10, 2016 What Method of sound activation VoodooHDA Link to comment Share on other sites More sharing options...
Codinger Posted January 10, 2016 Share Posted January 10, 2016 VoodooHDAUse a patched Apple hda Link to comment Share on other sites More sharing options...
boyriot Posted January 10, 2016 Share Posted January 10, 2016 Use a patched Apple hda I did try but always fail. any tutorial to install AppleHDA for AMD motherboard? Link to comment Share on other sites More sharing options...
Codinger Posted January 10, 2016 Share Posted January 10, 2016 I did try but always fail. any tutorial to install AppleHDA for AMD motherboard?Should be the same as with Intel Link to comment Share on other sites More sharing options...
Ilgiz90 Posted January 10, 2016 Share Posted January 10, 2016 @ Ilgiz90 please, write your full hardware specifications in your signature! No, the contents of your Extensions is incomplete, use these folder, see in annex. if someone does not know how to create the USB Flash Disk, please follow this video tutorial from Shaneee. look here: http://www.insanelymac.com/forum/topic/310098-el-capitan-install-preparation/?do=findComment&comment=2201380 Adjustments to the org.chameleon.boot.plist will always depend on which graphics card and graphics resolution you have installed: For example, with Nvidia graphics card, then change into: -v -f npci=0x2000 or 0x30000 GraphicsEnabler=No nv_disable=1 usekernelcache=No for Nvidia graphics cards here current: Cuda Drivers: https://developer.nvidia.com/cuda-downloads Nvidia Webdriver: http://www.insanelymac.com/forum/topic/306535-nvidia-web-driver-updates-for-el-capitan-update-01042016/ For example, with other graphics card, then change into: -v -f npci=0x2000 or 0x30000 GraphicsEnabler=Yes Please take a little time to read thoroughly the previous pages, all threads have already been discussed several times and explained, we can not that each explain again and again here. I ask for your understanding. we have to deal with many problems to fix the USB ports but that will you notice when your system starts. Edit 1: Attention! the org.chameleon.boot.plist is the path for the AMD Kernel ===> /Extra/ if you would like to install the kernel in /System/Library/kernels/ , then please change this line. Edit 2: Notice these before and after installation: in System / Library / Extensions / those two drivers into the USB Flash Disk to delete / remove: AppleIntelCPUPowerMangement.kext and AppleTyMCEDriver.kext (caused MSR Error) Edit 3: If your reached the first time the Desktop, and then detects that the mouse / keyboard does not respond / not working. then insert the USB plug of your mouse, by searching, first on the front USB ports and then on the rear USB ports, When the mouse is active, then search the active port for the keyboard. Edit 4: If you do not needed the drivers in the Extensions folder, then remove or add the appropriate drivers for your hardware. .....I hope, I have not forgotten anything important, I did everything as you advised. Tried to install all the kernels in turn. There is no result. https://youtu.be/Jix53r7_CRc My Extra http://rapid.ufanet.ru/17915269 Link to comment Share on other sites More sharing options...
spakk Posted January 10, 2016 Author Share Posted January 10, 2016 in the Extra / Extensions / folder I have all the drivers installed, please use only the drivers for your hardware, not all. try first only with:NullCPUPowerManagement.kext, faceSMC.kext, voodooPS2 , and the correct kernel for your CPU Link to comment Share on other sites More sharing options...
bennington111 Posted January 10, 2016 Share Posted January 10, 2016 I did everything as you advised. Tried to install all the kernels in turn. There is no result. https://youtu.be/Jix53r7_CRc My Extra http://rapid.ufanet.ru/17915269 Hardware? Link to comment Share on other sites More sharing options...
Mr___G Posted January 10, 2016 Share Posted January 10, 2016 Ok guys I have created my 10.11.2 installer on Internal HDD using dummy kexts I get the error can't get kextd port Without the dummy kexts I get the usb stop/start error I have tried many ways to no avail. My hardware is as follows Ga78lmtusb3 fx8350 16gb ddr3 R9270X I'm using Enoch 2795 and only minimal drivers for specific hardware.I have also tried many kernels which all end in same result. Thanks for any help in advance. Link to comment Share on other sites More sharing options...
spakk Posted January 10, 2016 Author Share Posted January 10, 2016 Ok guys I have created my 10.11.2 installer on Internal HDD using dummy kexts I get the error can't get kextd port Without the dummy kexts I get the usb stop/start error I have tried many ways to no avail. My hardware is as follows Ga78lmtusb3 fx8350 16gb ddr3 R9270X I'm using Enoch 2795 and only minimal drivers for specific hardware.I have also tried many kernels which all end in same result. Thanks for any help in advance. try with the other USB driver: Dummy USBEHCI PCI.kext (you've already tested?) Dummy USBXHCIPCI.kext (you've already tested?) FakePCIID_XHCIMux.kext FakePCIID.kext USB_Series8_Injector.kext USB_Series9_Injector.kext USBInjectAll.kext GenericUSBXHCI.kext (use last version) Link to comment Share on other sites More sharing options...
Mr___G Posted January 10, 2016 Share Posted January 10, 2016 Hi Spakk, I have tried all but Usbinjectall.kext and latest GenericUSBXHCI.kext any idea where I can find them my friend ? Thanks. Link to comment Share on other sites More sharing options...
bennington111 Posted January 10, 2016 Share Posted January 10, 2016 Hi Spakk, I have tried all but Usbinjectall.kext and latest GenericUSBXHCI.kext any idea where I can find them my friend ? Thanks. https://bitbucket.org/RehabMan/ Link to comment Share on other sites More sharing options...
Mr___G Posted January 10, 2016 Share Posted January 10, 2016 https://bitbucket.org/RehabMan/ You my friend are a star thank you...I will give it a bash shortly. Thanks again guys. Link to comment Share on other sites More sharing options...
spakk Posted January 10, 2016 Author Share Posted January 10, 2016 try these here GenericUSBXHCI.kext.zip Link to comment Share on other sites More sharing options...
Mr___G Posted January 10, 2016 Share Posted January 10, 2016 try these here Much appreciated Spakk will give it a go and let you know the outcome. Link to comment Share on other sites More sharing options...
spakk Posted January 10, 2016 Author Share Posted January 10, 2016 this will work, you'll be surprised but only one USB3.0 working, see here: http://www.insanelymac.com/forum/public/style_images/insanely_mac/icon_share.png Link to comment Share on other sites More sharing options...
Mr___G Posted January 10, 2016 Share Posted January 10, 2016 Unfortunately it doesn't work my friend still APPLEUSBEHCI stop/restart error ? Dummy kexts get me the closest but then just hangs on random lines. Link to comment Share on other sites More sharing options...
spakk Posted January 10, 2016 Author Share Posted January 10, 2016 .... do you use a DSDT? Link to comment Share on other sites More sharing options...
Mr___G Posted January 10, 2016 Share Posted January 10, 2016 No Would you advise to use one Link to comment Share on other sites More sharing options...
spakk Posted January 10, 2016 Author Share Posted January 10, 2016 USB patch (DSDT) for El Capitan, no. but a viable dsdt, with which you can boot your system, yes. have you tried it with the patched drivers of y2k4u? see appendix IOUSBHostFamily.kext.zip Link to comment Share on other sites More sharing options...
Mr___G Posted January 10, 2016 Share Posted January 10, 2016 Ok will give it a go.....where can I find the USB patch my friend ? USB patch (DSDT) for El Capitan, no. but a viable dsdt, with which you can boot your system, yes. I have you tried it with the patched drivers of y2k4u? see appendix I will try this first then dsdt patch....Thank you for your time. Link to comment Share on other sites More sharing options...
Recommended Posts