Jump to content

[AMD] OS X El Capitan (10.11) Kernel Testing & Release (for help use the Help Topic)

spakk

By spakk,
in OS X 10.11 (El Capitan)

 Share
1,255 posts in this topic

Recommended Posts

steparab
steparab
Posted
Posted

Do you have tested the other kernels? go back a page, there you can find the other kernel.

 

Yup! every single one of them, all boots fine but the icon problem is still there with everyone of them. Btw if i remember correct i've tested bronya's kernel with my installation on an intel pc (just swaped the drive) the kernel booted and the icons on intel was fine, so it's an FX instruction missing from the kernel? or some framework that needs to be patched? Any Fx user that managed to fix that problem?

Link to comment
Share on other sites
bennington111
bennington111
Posted
Posted

 

@ bennington111
I meant it differently.
... when you start the installation from your USB Flash drive, and the installation starts, then activate up in the register the installation log, then you can see / recognize during the installation at which point the OS X installation stops.
 
Edit:
 
There may possibly be a mistake when creating the installer, due to a defective Essentials.pkg? etc ... otherwise you can without knowing the reasons, do not make a clear statement to resolve the issue.
... I hope you understand what I meant.

 

I tried various options for installation. Perhaps the kernel problem, need to wait for the new version. Very very sad. (((

Link to comment
Share on other sites
spakk
spakk
Posted
  • Author
Posted
Another variation to arrive at an executable El Capitan HDD... is the El Capitan HD.app used by chris1111.

This app runs unfortunately only on a runnable version of El Capitan!  when a friend has a real Mac or an hackintosh with runnable El Capitan version, then you can install very easy, with the app on an external HDD.

... only swap the amd kernel and El Capitan will start on your amd hackintosh.

.... how far this is legal, I can not say ... and I will not comment in this regard.

 

The fact is that: the installation of El Capitan, via USB flash disk is not easy to install an AMD hackintosh.

Link to comment
Share on other sites
spakk
spakk
Posted
  • Author
Posted

Hello guys. I would try to install el capitan on my pc amd . Kernel for amd fx bulldozers ?

thanks a lot

http://www.insanelymac.com/forum/topic/310026-help-topic-el-capitan-all-questions-about-usb-dsdt-patch-and-install-problems/page-8?p=2203211&do=findComment&comment=2203211

Link to comment
Share on other sites
derInselfan
derInselfan
Posted
Posted

 

 when a friend has a real Mac or an hackintosh with runnable El Capitan version, then you can install very easy, with the app on an external HDD.
... only swap the amd kernel and El Capitan will start on your amd hackintosh.

 

This is my way, but why it does not work for me?

Link to comment
Share on other sites
spakk
spakk
Posted
  • Author
Posted

hmm......did you have removed these drivers: AppleIntelCPUPowerManagement.kext, AppleTyMCEDriver.kext, if not then remove and basically repair the permissions and refresh the kernel cache.

           ....otherwise, I know no the reason why your hackintosh does not start. :(

Link to comment
Share on other sites
spakk
spakk
Posted
  • Author
Posted (edited)

 

Update: Now, on the desktop! :hyper:

 

Unfortunately, no USB, keyboard and mouse do not run.

Thank you for your patience, bronya kernel works.
In EXTRA: FakeSMC.kext and NullCpuPowerManagement.kext

 

No, USB and keyboard should work. When you've reached the Desktop, then insert the USB plug of the mouse,  search first in the front and then in the rear USB ports, when the mouse is active, then search the active port for the Keyboard.

Edited by spakk
  • Like 1
Link to comment
Share on other sites
spakk
spakk
Posted
  • Author
Posted

You are my hero, Thank you so much!

cool, I had the same problem at the beginning, which has given me unnecessary headaches and a few sleepless nights.

Link to comment
Share on other sites
boyriot
boyriot
Posted
Posted

I installed El capitan on aser aspire 7551 on  instructions http://www.insanelym...ll-preparation/

 

I have an error "still waiting for root device" i installed "DummyUSBEHCIPCI.kext" "FakeCMS.kext" "NullCPUPowerManagement.kext"

What am I doing wrong?

 

configuration aser aspire 7551:

CPU Phenom II N970 

AMD M880G

 

GPU ATI Radeon HD 6650M

have you change sata mode from IDE to AHCI?

Link to comment
Share on other sites
bennington111
bennington111
Posted
Posted

 

then disable USB 2.0 in BIOS and run from your USB flash disk.
during the installation, open the installation log, check at which point, the installation stops.
 
These are my current BIOS settings, OS X (Mavericks, Yosemite and El Capitan) and Windows start so very reliable (with Enoch Bootloader Vers. 2795):
 
Advanced BIOS Features: 
AMD C1E [Enabled]

Virtualization [Enabled]

AMD 8 Col & Q. [Auto]

 

Integrated Peripherals: 
On Chip SATA Controller [Enabled]

On Chip SATA Type [AHCI-SATA]

On Chip SATA 3.0 [Enabled]

F_USB30 Controller [Enabled]

SATA3 Controller [Enabled]

SATA3 Ctrl Mode [AHCI]

ON Board 1394 Function [Enabled] 

 

Edit:

... these settings may not necessarily work with yours board.

 

Installation stuck here:

post-1208014-0-09419600-1452169571_thumb.png

Link to comment
Share on other sites
savioparete
savioparete
Posted
Posted

i can install el capitan on external hdd using my macbook pro retina 2015 then install enoch on this hdd and change the kernel (using Bronya) + fakesmc and nullcpu in extra folder.

 

sorry for my english.


Today I try to install following this method and I'll know.

Link to comment
Share on other sites
spakk
spakk
Posted
  • Author
Posted

Installation stuck here:

please upload the log file so that we can see the entire contexts of the problems.

I installed El capitan on aser aspire 7551 on  instructions http://www.insanelym...ll-preparation/I have an error "still waiting for root device" i installed "DummyUSBEHCIPCI.kext" "FakeCMS.kext" "NullCPUPowerManagement.kext"What am I doing wrong?configuration aser aspire 7551:CPU Phenom II N970 AMD M880GGPU ATI Radeon HD 6650M

compare the contents of your /Extra/Extensions/ folder with the files that have Shaneee and I in the previous pages uploaded. Note the creation dates of the drivers with yours drivers. If you are using a DSDT.aml, then try first of all without dsdt.

Link to comment
Share on other sites
Ilgiz90
Ilgiz90
Posted
Posted

please upload the log file so that we can see the entire contexts of the problems.

 

compare the contents of your /Extra/Extensions/ folder with the files that have Shaneee and I in the previous pages uploaded. Note the creation dates of the drivers with yours drivers. If you are using a DSDT.aml, then try first of all without dsdt.

http://rapid.ufanet.ru/90371564 It's my Extensions. All right?

Link to comment
Share on other sites
spakk
spakk
Posted
  • Author
Posted (edited)
 
@ Ilgiz90
please, write your full hardware specifications in your signature!
No, the contents of your Extensions is incomplete, use these folder, see in annex.
 
 
if someone does not know how to create the USB Flash Disk, please follow this video tutorial from Shaneee. look here: http://www.insanelymac.com/forum/topic/310098-el-capitan-install-preparation/?do=findComment&comment=2201380
 
Adjustments to the org.chameleon.boot.plist will always depend on which graphics card and graphics resolution you have installed:
For example, with Nvidia graphics card, then change into: -v -f npci=0x2000 or 0x30000  GraphicsEnabler=No nv_disable=1 usekernelcache=No
 
for Nvidia graphics cards here current:
 
For example, with other graphics card, then change into: -v -f npci=0x2000 or 0x30000 GraphicsEnabler=Yes
Please take a little time to read thoroughly the previous pages, all threads have already been discussed several times and explained, we can not that each explain again and again here. I ask for your understanding.
we have to deal with many problems to fix the USB ports but that will you notice when your system starts.
 
 
Edit 1:

Attention! the org.chameleon.boot.plist is the path for the AMD Kernel ===> /Extra/ if you would like to install the kernel in /System/Library/kernels/ , then please change this line.

 

Edit 2:

Notice these before and after installation:
in System / Library / Extensions / those two drivers into the USB Flash Disk to delete / remove:
AppleIntelCPUPowerMangement.kext and AppleTyMCEDriver.kext (caused MSR Error)
 
Edit 3:
If your reached the first time the Desktop, and then detects that the mouse / keyboard does not respond / not working.

then insert the USB plug of your mouse, by searching, first on the front USB ports and then on the rear USB ports, When the mouse is active, then search the active port for the keyboard.

 

Edit 4:

If you do not needed the drivers in the Extensions folder, then remove or add the appropriate drivers for your hardware.

 

 

.....I hope, I have not forgotten anything important,

Extra_for_AMD_USER.zip

Edited by spakk
  • Like 2
Link to comment
Share on other sites
spakk
spakk
Posted
  • Author
Posted

Hi guys I installed el capitan in my pc amd (fx 8180) using enoch and kernel bronya. only two usb ports on the mobo will work. When I boot with-v i  have usb always as shown on the screen

help me for usb error in boot

this you have to patch your dsdt.aml

  • Like 1
Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...