Jump to content

[AMD] OS X El Capitan (10.11) Kernel Testing & Release (for help use the Help Topic)

spakk

By spakk,
in OS X 10.11 (El Capitan)

 Share
1,255 posts in this topic

Recommended Posts

spakk
spakk
Posted
  • Author
Posted (edited)

Hi. Help me please fix this error.

I use Maverick and Yosemite, is ok. But problem with install El capitan. I use this kernel: http://www.insanelymac.com/forum/topic/309765-amd-os-x-el-capitan-1011-kernel-testing-release-for-help-use-the-help-topic/page-26?do=findComment&comment=2199510.

My DSDT & error screenshot.

post-1510632-0-00491300-1450926876_thumb

 

here your patched dsdt.aml  ( the changes that I've made in your DSDT, come out of this post:  http://www.insanelymac.com/forum/topic/310026-help-topic-el-capitan-all-questions-about-usb-dsdt-patch-and-install-problems/page-2?p=2199955&do=findComment&comment=2199955 ) 

 

"kext-dev-mode=1" is not necessary, see in your org.chameleon.boot.plist

do you have installed the IOUSBHostFamily.kext driver in S / L / E ? see download link, above

DSDT_bennington111_a.zip

Edited by spakk
Link to comment
Share on other sites
spakk
spakk
Posted
  • Author
Posted (edited)

@bennington111

Clover runs with AMD, from 10.6.8 to 10.10.5, sorry!

 

@To all, please help.

I have now changed to Enoch (USB Stick 2GB), but understand nothing.

if you still want to use clover bootloader, then should the setting in the config.plist, be changed.

(This information are from polyzargone)

	<key>ACPI</key>
	<dict>
		<key>DSDT</key>
		<dict>
			<key>Debug</key>
			<false/>
			<key>DropOEM_DSM</key>
			<false/>
			<key>Name</key>
			<string>DSDT.aml</string>
			<key>Patches</key>
			<array>
				<dict>
					<key>Comment</key>
					<string>EHC2 to EH02</string>
					<key>Find</key>
					<data>
					RUhDMg==
					</data>
					<key>Replace</key>
					<data>
					RUgwMg==
					</data>
				</dict>
				<dict>
					<key>Comment</key>
					<string>EHC1 to EH01</string>
					<key>Find</key>
					<data>
					RUhDMQ==
					</data>
					<key>Replace</key>
					<data>
					RUgwMQ==
					</data>
				</dict>
			</array>

	</dict>
	<key>RtVariables</key>
	<dict>
		<key>BooterConfig</key>
		<string>0x28</string>
		<key>CsrActiveConfig</key>
		<string>0x3</string>
	</dict>
	<key>SMBIOS</key>

if you want to use Enoch, then the contents of the Extra folder needs to be adjusted:

 

Edit:

here your adjusted Extra folder, smbios.plist and DSDT.aml are not included, use eg. smbios for a Mac Pro 3,1 and use the dsdt.aml from your clover bootloader (logically without error)

 

 

derInselFan_Extra.zip

Edited by spakk
Link to comment
Share on other sites
spakk
spakk
Posted
  • Author
Posted

I get an error. "invalid kernel opcode (64-bit): 1e 7f bf 80 7f ff ff ff 08 00 00 00 00 00 .. .. ..

 

Here is my Extra folder (Including DSDT.aml and smbios.plist), please check again.

Which kernel are you using?

Link to comment
Share on other sites
spakk
spakk
Posted
  • Author
Posted

use the latest kernel from Bronya ---> 10.11.2 rc1 or from Y2K4Y -> 10.11.2R1  or 10.11.2_SSSEPlus_V2 or _V1

or AnV_Shaneee...

 

..... we have forgotten to insert all running kernels into the Database, I will upload later all kernels in the Database.

kernel_10.11.2_rc1.zip

10112R1(1).zip

kernel_SSSEPlus_V1.zip

Kernels_SSSEPlus_V2.zip

AnV_Shaneee.zip

Link to comment
Share on other sites
derInselfan
derInselfan
Posted
Posted

@spakk Thank you!

 

All five tested, always the same, i get an error.

"invalid kernel opcode (64-bit): 1e 7f bf 80 7f ff ff ff 08 00 00 00 00 00 .. .. .."

 

Will wait for the next kernel, see you later. :(

Link to comment
Share on other sites
spakk
spakk
Posted
  • Author
Posted

@spakk Thank you!

 

All five tested, always the same, i get an error.

"invalid kernel opcode (64-bit): 1e 7f bf 80 7f ff ff ff 08 00 00 00 00 00 .. .. .."

 

Will wait for the next kernel, see you later. :(

 ....... did you have installed another driver in /Extra/Extensions/ or  S/L/E , such as: EvOreboot.kext or another driver? if so then remove. ...a driver is cause these problems, some user have reported.
test with these bootflag: -v -f npci=0x3000 UsekernelCache=No GraphicsEnabler=Yes PCIRootUID=1
Link to comment
Share on other sites
derInselfan
derInselfan
Posted
Posted

@Miliantosh So as always.

 

No installer, clean install with adapter and intel hackintosh, then replace kernel.
No extra kext, same boot flag, boot with clover (10.8.5/10.9.5/10.10.5) and enjoy.
 

Now with Enoch bootloader from USB Stick, always the same error.

Link to comment
Share on other sites
spakk
spakk
Posted
  • Author
Posted (edited)

I've read the post by Piker at the end of last Year,  but SSDT.aml? I do not know if that will work?

 

I start the system and will report, with these files: ssdt_usb.aml + DSDT.aml  ^_^
Edit:
unchanged, enclose my ioreg file,
in this Test I have use the GenericUSBXHCI.kext, but nothing is activated.

 

spakk_iMac_05-1-2016.zip

Edited by spakk
Link to comment
Share on other sites
boyriot
boyriot
Posted
Posted

after installed, at first boot I got error boot0: GPT boot0: error.

I ran this on terminal : dd if=/usr/standalone/i386/boot1h of=/dev/disk0s2

I got boot1 : error

I think it's because I dont have boot file on the installed HDD

 

how do I copy boot file and /extra folder from osx installer to HDD using terminal?

Link to comment
Share on other sites
steparab
steparab
Posted
Posted

how do I copy boot file and /extra folder from osx installer to HDD using terminal?

cd /

cd /Volumes

ls

then you 'll see all the drives mounted by osx installer just cd to your usb stick and cp whatever u want to your /Volume/ELCAPITANHDD

Link to comment
Share on other sites
bennington111
bennington111
Posted
Posted

here your patched dsdt.aml  ( the changes that I've made in your DSDT, come out of this post:  http://www.insanelymac.com/forum/topic/310026-help-topic-el-capitan-all-questions-about-usb-dsdt-patch-and-install-problems/page-2?p=2199955&do=findComment&comment=2199955 ) 

 

"kext-dev-mode=1" is not necessary, see in your org.chameleon.boot.plist

do you have installed the IOUSBHostFamily.kext driver in S / L / E ? see download link, above

Install not started, same error. Yes, i install IOUSBHostFamily.kext to S/L/E.

post-1208014-0-14972300-1452071295_thumb.jpg

Link to comment
Share on other sites
spakk
spakk
Posted
  • Author
Posted

Hi guys, Is there any fix for the Green-missing apple icon on FX?

 

Do you have tested the other kernels? go back a page, there you can find the other kernel.

Install not started, same error. Yes, i install IOUSBHostFamily.kext to S/L/E.

your BIOS settings are set correctly? AHCI actice and all Sata ports are active? Attempts to boot without dsdt:

-f -v npci=0x3000 DSDT=NO

Link to comment
Share on other sites
bennington111
bennington111
Posted
Posted

your BIOS settings are set correctly? AHCI actice and all Sata ports are active? Attempts to boot without dsdt:

-f -v npci=0x3000 DSDT=NO

I change boot flag to -f -v npci=0x3000 DSDT=NO, but same error.

Bios setting correctly, AHCI mod, virtual machine mode - Off.

If i disabled usb 2.0 in bios, installation started, but stuck on 15%.

Link to comment
Share on other sites
spakk
spakk
Posted
  • Author
Posted (edited)

I change boot flag to -f -v npci=0x3000 DSDT=NO, but same error.

Bios setting correctly, AHCI mod, virtual machine mode - Off.

If i disabled usb 2.0 in bios, installation started, but stuck on 15%.

then disable USB 2.0 in BIOS and run from your USB flash disk.
during the installation, open the installation log, check at which point, the installation stops.
 
These are my current BIOS settings, OS X (Mavericks, Yosemite and El Capitan) and Windows start so very reliable (with Enoch Bootloader Vers. 2795):
 
Advanced BIOS Features: 
AMD C1E [Enabled]

Virtualization [Enabled]

AMD 8 Col & Q. [Auto]

 

Integrated Peripherals: 
On Chip SATA Controller [Enabled]

On Chip SATA Type [AHCI-SATA]

On Chip SATA 3.0 [Enabled]

F_USB30 Controller [Enabled]

SATA3 Controller [Enabled]

SATA3 Ctrl Mode [AHCI]

ON Board 1394 Function [Enabled] 

 

Edit:

... these settings may not necessarily work with yours board.

Edited by spakk
Link to comment
Share on other sites
bennington111
bennington111
Posted
Posted

 

then disable USB 2.0 in BIOS and run from your USB flash disk.
during the installation, open the installation log, check at which point, the installation stops.
 
These are my current BIOS settings, OS X (Mavericks, Yosemite and El Capitan) and Windows start so very reliable (with Enoch Bootloader Vers. 2795):
 
Advanced BIOS Features: 
AMD C1E [Enabled]

Virtualization [Enabled]

AMD 8 Col & Q. [Auto]

 

Integrated Peripherals: 
On Chip SATA Controller [Enabled]

On Chip SATA Type [AHCI-SATA]

On Chip SATA 3.0 [Enabled]

F_USB30 Controller [Enabled]

SATA3 Controller [Enabled]

SATA3 Ctrl Mode [AHCI]

ON Board 1394 Function [Enabled] 

 

Edit:

... these settings may not necessarily work with yours board.

 

Not have install.log in var/log.

post-1208014-0-25543300-1452094737_thumb.png

Link to comment
Share on other sites
spakk
spakk
Posted
  • Author
Posted
@ bennington111

I meant it differently.

... when you start the installation from your USB Flash drive, and the installation starts, then activate up in the register the installation log, then you can see / recognize during the installation at which point the OS X installation stops.

 

Edit:

 

There may possibly be a mistake when creating the installer, due to a defective Essentials.pkg? etc ... otherwise you can without knowing the reasons, do not make a clear statement to resolve the issue.

... I hope you understand what I meant.

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...