Jump to content

[AMD] OS X El Capitan (10.11) Kernel Testing & Release (for help use the Help Topic)

spakk

By spakk,
in OS X 10.11 (El Capitan)

 Share
1,255 posts in this topic

Recommended Posts

boyriot
boyriot
Posted
Posted

use a another amd kernel, eventually the kernel is not compatible for your CPU? .....

Which kernel are you using? What data are installed in your Extra folder? If everything fits together then the system should boot.

I'm using latest bronya kernel http://www.insanelymac.com/forum/topic/309765-amd-os-x-el-capitan-1011-kernel-testing-release-for-help-use-the-help-topic/page-26?do=findComment&comment=2199510

I have attached extra files here.

 

@boyriot upload your kernel.plist please. 

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
    <key>KernelBooter_kexts</key>
    <string>Yes</string>
    <key>KernelHaswell</key>
    <string>No</string>
    <key>KernelLapicError</key>
    <string>Yes</string>
    <key>KernelLapicVersion</key>
    <string>Yes</string>
    <key>KernelPm</key>
    <string>Yes</string>
    <key>KernelSSE3</key>
    <string>Yes</string>
    <key>KernelcpuFamily</key>
    <string>Yes</string>
</dict>
</plist>

may be I forgot to install KernelBooter_kext in chameleon?

Extra.zip

Link to comment
Share on other sites
Shaneee
Shaneee
Posted
Posted

No need to install with Chameleon we set it in kernel.plist but your has entries that are not needed. Either use the one I've uploaded or edit yours so its like this,

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
    <key>KernelBooter_kexts</key>
    <string>Yes</string>
</dict>
</plist>
  • Like 1
Link to comment
Share on other sites
spakk
spakk
Posted
  • Author
Posted

@boyriot

All this information has been described here several times, if you take this information in detail, then it will work.  :)

Link to comment
Share on other sites
Shaneee
Shaneee
Posted
Posted

I've just noticed your Extra folder you uploaded doesn't have org.chameleon.boot.plist or kernel.plist or even SMBios.plist present. Also do you need all those kexts to boot? Modules folder is no longer needed either. Scrap your Extra folder and use this one.

 

Extra.zip

Link to comment
Share on other sites
spakk
spakk
Posted
  • Author
Posted

I'm using latest bronya kernel http://www.insanelymac.com/forum/topic/309765-amd-os-x-el-capitan-1011-kernel-testing-release-for-help-use-the-help-topic/page-26?do=findComment&comment=2199510

I have attached extra files here.

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
    <key>KernelBooter_kexts</key>
    <string>Yes</string>
    <key>KernelHaswell</key>
    <string>No</string>
    <key>KernelLapicError</key>
    <string>Yes</string>
    <key>KernelLapicVersion</key>
    <string>Yes</string>
    <key>KernelPm</key>
    <string>Yes</string>
    <key>KernelSSE3</key>
    <string>Yes</string>
    <key>KernelcpuFamily</key>
    <string>Yes</string>
</dict>
</plist>

may be I forgot to install KernelBooter_kext in chameleon?

....and...you're using outdated drivers (ApplePs2Controller use the new VoodooPS2) and same drivers (RTL8111 and RTL8100 etc.) which are for one and the same hardware. This can cause boot problems and might lead to a kernel panic. check the contents in extra/extensions !!

Edit:

 

a few pages previously I've loaded the voodoops2 driver and a few pages earlier the link of shaneee's video tutorial, it is included the necessary org.chameleon.boot.plist and a smbios.plist

Link to comment
Share on other sites
boyriot
boyriot
Posted
Posted

@Shaneee if I used your extra files, it stuck on [MSR] unknown location 0x000000000000280

But if I used my previous extra files it can install until finished but then bootloop. I have org.chameleon.boot.plist, kernel.plist, smbios.plist in my previous extra folder but I didn't upload here.

Link to comment
Share on other sites
Shaneee
Shaneee
Posted
Posted

@Shaneee if I used your extra files, it stuck on [MSR] unknown location 0x000000000000280

But if I used my previous extra files it can install until finished but then bootloop. I have org.chameleon.boot.plist, kernel.plist, smbios.plist in my previous extra folder but I didn't upload here.

 

Use the files I sent and remove AppleTyMCEDriver.kext from System/Library/Extensions to fix the MSR issue.

Link to comment
Share on other sites
Shaneee
Shaneee
Posted
Posted

Same problem, bootloop after installed :wallbash:

After installed? So you've installed to your HDD and now it instantly reboots upon first boot. Have you copied the Extra folder and kernel to the installed HDD after the install? If yes the use -f UseKernelCache=No to boot or it may use the prelinkedkernel of the vanilla kernel.
Link to comment
Share on other sites
boyriot
boyriot
Posted
Posted

I think its because i'm using the same hdd partition to create osx installer

After installed? So you've installed to your HDD and now it instantly reboots upon first boot. Have you copied the Extra folder and kernel to the installed HDD after the install? If yes the use -f UseKernelCache=No to boot or it may use the prelinkedkernel of the vanilla kernel.

yes, instantly reboots upon first boot. How can I copy to the installed hdd if I can boot osx?

Edit : I erased the partition that has osx installer, it shows :

boot0: GPT

boot0: GPT

boot0: error

 

I'm going to sleep now, i'll try to create osx installer on another hdd tomorrow. Thanks a lot guys

Link to comment
Share on other sites
spakk
spakk
Posted
  • Author
Posted
.....install the boot loader again.
 
Edit:
In annexed are uploaded the necessary files for your hardware, it are as follows:
- an Extra folder with Extensions and modules folder, but without org.chameleon.boot.plist and without smbios.plist upload their own in the Extra folder!!
Moreover, I have attached various USB files for El Capitan, this can you insert and test successively in the Extra/Extensions/ folder, not all at once at the same time !!!
 
this is your hardware spec:
 

Hardware Spec.

Chipset


AMD 870 / SB850
CPU SUPPORT
AMD Phenom™ II X6 Processor
AMD Phenom™ II X4 Processor
AMD Phenom™ II X3 Processor
AMD Phenom™ II X2 Processor
AMD Athlon™ II X4 Processor
AMD Athlon™ II X3 Processor
AMD Athlon™ II X2 Processor
AMD Sempron™ Processor
Maximum CPU TDP (Thermal Design Power) : 140Watt
HT
Support HT 5.2G
MEMORY
Support Dual Channel DDR3 1800(OC)/1600(OC)/1333/1066/800 MHz
4 x DDR3 DIMM Memory Slot
Max. Supports up to 16GB Memory
EXPANSION SLOT
2 x PCI-E x16 2.0 Slot(x16, x4)
2 x PCI-E x1 2.0 Slot
2 x PCI Slot
STORAGE
5 x SATA3 Connector
1 x eSATA2 Connector
1 x IDE Connector
Support SATA RAID: 0,1,5,10
USB
6 x USB 2.0 Port
3 x USB 2.0 Header
IEEE 1394
VIA VT6330
1 x IEEE 1394a Port
1 x IEEE 1394a Header
LAN
Realtek RTL8111E - 10/100/1000 Controller
CODEC
Realtek ALC892 8-Channel Blu-ray Audio
REAR I/O
1 x PS/2 Mouse
1 x PS/2 Keyboard
1 x eSATA2 Connector
1 x FireWire IEEE 1394a Port
6 x USB 2.0 Port
1 x RJ-45 Port
6 x Audio Connector
1 x S/PDIF Out Port
INTERNAL I/O
1 x Printer Header
3 x USB 2.0 Header
5 x SATA3 6Gb/s Connector
1 x IDE Connector
1 x Front Audio Header
1 x Front Panel Header
1 x CD-IN Header
1 x S/PDIF-Out Header
1 x CPU Fan Header
2 x System Fan Header
1 x Serial Header
1 x FireWire IEEE 1394 Header
1 x CIR Header
DIMENSION
ATX Form Factor Dimension: 30.5cm X 22cm ( W x L )
OS SUPPORT
Support Windows XP / Vista / 7
BUNDLE SOFTWARE
BIO-Remote
ACCESSORIES
3 x SATA Cable
1 x SATA Power Cable
1 x I/O Shield
1 x CD Driver
1 x User Manual
FEATURES
Supports BIO-unlocKING
Windows 7 Compatible
Supports AOD ACC
Supports Phenom II x6
Supports AM3
Supports 100% Solid capacitor
Supports Tweak Tech
Supports Clean-Tone
Supports O.N.E
Supports Rapid Switch
Supports Rapid Debug
Supports BIOS-Flasher
Supports GPU

for El Capitan.zip

  • Like 1
Link to comment
Share on other sites
y2k4u
y2k4u
Posted
Posted

I had a few minutes to poke and play around with El Capo 10.11.2 USB kext.   For those with USB loop hell, could you try the attached kext and replace the same kext in S/L/E to see if it makes any difference?  Remove all USB related patched kexts (if any) and your USB kexts should be as Vanilla as possible.  As usual, you'll need to repair permission and rebuild kext caches after applying the attached kext.  Please report your findings.

 

IOUSBHostFamily.kext.zip

  • Like 3
Link to comment
Share on other sites
spakk
spakk
Posted
  • Author
Posted (edited)
The error messages are partially suppressed at boot time. :)

  However, the USB problems remain. Only Mouse and keyboard are active. ^_^

Edited by spakk
  • Like 1
Link to comment
Share on other sites
y2k4u
y2k4u
Posted
Posted

 

The error messages are partially suppressed at boot time. :)
  However, the USB problems remain. Only Mouse and keyboard are active. ^_^

 

 

Still USB boot loop or not?  All available USB2/3 not working?

Link to comment
Share on other sites
Shaneee
Shaneee
Posted
Posted

 

Hope to come!  :D
But this is the first time that, I recognize my USB Stick (Cruzer ScanDisk) in ioreg-file,  see iojones reg file

I wanted to upload a few pictures, then my system crashed.

Edit:

my next test will boot without dsdt, then I will report further details.

Edit:

only with my fake dsdt possible. I have to work continue at my fake - dsdt.

 

 

Best to test it on a Vanilla USB installer with only the kernel, the USB kext from y2k4u and any other needed kexts to test properly. 

Link to comment
Share on other sites
spakk
spakk
Posted
  • Author
Posted

@Shaneee,

 

1) this is a test without USB dummy only with: FakeSMC, nullpower, and Chipset driver

 

2) the first image is booting without the dsdt

without_dsdt.png

Link to comment
Share on other sites
spakk
spakk
Posted
  • Author
Posted

No my friend, otherwise you would have seen a big smile in my face.

  • Like 1
Link to comment
Share on other sites
bennington111
bennington111
Posted
Posted

Hi. Help me please fix this error.
I use Maverick and Yosemite, is ok. But problem with install El capitan. I use this kernel: http://www.insanelymac.com/forum/topic/309765-amd-os-x-el-capitan-1011-kernel-testing-release-for-help-use-the-help-topic/page-26?do=findComment&comment=2199510.
My DSDT & error screenshot.
post-1510632-0-00491300-1450926876_thumb

dsdt.zip

Link to comment
Share on other sites
derInselfan
derInselfan
Posted
Posted

"Google Translator"
Hi folks, sorry for my bad english.
I use Clover r3330.
Mountain Lion 10.8.5, Mavericks10.9.5 with kernel in root runs very well
Yosemite 10.10.5 with kernel Bronya RC3 in S / L / kernel is going very well.
El Capitan 10.11.2 with kernel (all tested) in S / L / kernel is not running.
I use the same boot flag, SIP is off.
Only a small bar appears on the monitor, that's all.
Can you help me?

 

Greeting derInselfan

Link to comment
Share on other sites
spakk
spakk
Posted
  • Author
Posted

Hi. Help me please fix this error.

I use Maverick and Yosemite, is ok. But problem with install El capitan. I use this kernel: http://www.insanelymac.com/forum/topic/309765-amd-os-x-el-capitan-1011-kernel-testing-release-for-help-use-the-help-topic/page-26?do=findComment&comment=2199510.

My DSDT & error screenshot.

post-1510632-0-00491300-1450926876_thumb

use these dsdt and this driver:

http://www.insanelymac.com/forum/topic/310026-help-topic-el-capitan-all-questions-about-usb-dsdt-patch-and-install-problems/page-6?p=2202840&do=findComment&comment=2202840

DSDT_bennington111.zip

Link to comment
Share on other sites
bennington111
bennington111
Posted
Posted

"Google Translator"

Hi folks, sorry for my bad english.

I use Clover r3330.

Mountain Lion 10.8.5, Mavericks10.9.5 with kernel in root runs very well

Yosemite 10.10.5 with kernel Bronya RC3 in S / L / kernel is going very well.

El Capitan 10.11.2 with kernel (all tested) in S / L / kernel is not running.

I use the same boot flag, SIP is off.

Only a small bar appears on the monitor, that's all.

Can you help me?

 

Greeting derInselfan

On AMD cpu for El capitan use only Enoch (Chameleon). Clover with El capitan on amd not work. Clover does not support function "boot without caches".

Link to comment
Share on other sites
spakk
spakk
Posted
  • Author
Posted (edited)

"Google Translator"

Hi folks, sorry for my bad english.

I use Clover r3330.

Mountain Lion 10.8.5, Mavericks10.9.5 with kernel in root runs very well

Yosemite 10.10.5 with kernel Bronya RC3 in S / L / kernel is going very well.

El Capitan 10.11.2 with kernel (all tested) in S / L / kernel is not running.

I use the same boot flag, SIP is off.

Only a small bar appears on the monitor, that's all.

Can you help me?

 

Greeting derInselfan

uploaded your Extra folder, then we'll see where the error is.

in German:

lade deinen Extra Ordner hier hoch, dann können wir den Inhalt überprüfen und gegebenfalls dir den Inhalt des Ordner anpassen, so dass dein System booten wird.

Edited by spakk
Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...