Cyberdevs Posted November 23, 2015 Author Share Posted November 23, 2015 Oh, sorry, I forget upload. http://cl.ly/dtbU I am looking at this guide about USB 3.0 issue, but I see also do not understand. http://www.tonymacx86.com/el-capitan-desktop-guides/179221-skylake-starter-guide.html Here is the thread. http://www.tonymacx86.com/desktop-compatibility/176407-testing-thread-skylake-platform-os-x.html Thanks a lot, But what ever I do I can't get the audio to work, it show the devices and all the input/output sources but still no sound! 1 Link to comment Share on other sites More sharing options...
bomerr Posted November 23, 2015 Share Posted November 23, 2015 Thanks a lot, But what ever I do I can't get the audio to work, it show the devices and all the input/output sources but still no sound! Also install VoodooTSCSync.kext and set IOCPUNumber to 3(i5) or 7(i7) For audio check out my thread, a guy posted how to fix it there. Link to comment Share on other sites More sharing options...
Majonéz Posted November 23, 2015 Share Posted November 23, 2015 Hi Majonez, good work, thanks. I do have 16GB 2800 MHz DDR4, but it shows 16GB 3200 MHz DDR4. Any idea? Frequency detection is not supported yet, I think it is just a cosmetic thing. I just patched the size detection, which is essential to the system. This my CPU Info. Thanks before Majonez http://d-h.st/3ghw I think, it will work. @giacomoleopardo No, I'm using the latest stock "Z170XGaming3.f5d": http://www.insanelymac.com/forum/topic/309352-el-capitan-on-ga-z170x-gaming-5/?p=2188103 About USB: I'm using the FakePCIID.kext and the FakePCIID_XHCIMux.kext. My ports are working, but I can't test them with USB3 device. @hashish.k I see that you have a different motherboard (Z170X-UD5). You should patch your DSDT too, and do not use my DSDT to your sys, because it can cause hangs and craches. 1 Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted November 23, 2015 Share Posted November 23, 2015 Frequency detection is not supported yet, I think it is just a cosmetic thing. I just patched the size detection, which is essential to the system. http://d-h.st/3ghw I think, it will work. @giacomoleopardo No, I'm using the latest stock "Z170XGaming3.f5d": http://www.insanelymac.com/forum/topic/309352-el-capitan-on-ga-z170x-gaming-5/?p=2188103 About USB: I'm using the FakePCIID.kext and the FakePCIID_XHCIMux.kext. My ports are working, but I can't test them with USB3 device. @hashish.k I see that you have a different motherboard (Z170X-UD5). You should patch your DSDT too, and do not use my DSDT to your sys, because it can cause hangs and craches. Yey, thanks you very much Majonez. It works Now, i can see multiplier of my cpu again Link to comment Share on other sites More sharing options...
hashish.k Posted November 24, 2015 Share Posted November 24, 2015 Hi Majonez, Thanks for your input. I have the hardware sensors in my clover/kexts/10.11 and I see that i have power management enabled with the intel power gadget. And How do i patch DSDT to enable sleep? sorry DSDT patching is new to me. I extracted my DSDT by pressing F4 on the clover screen and I get errors trying to compile the DSDT. I am attaching my DSDT, any help will be appreciated. DSDT.aml.zip Link to comment Share on other sites More sharing options...
gilg2533 Posted November 24, 2015 Share Posted November 24, 2015 Actually on my gaming 7 if I change the boot speed between 800 and 1000 mhz it affects what OS X shows for installed memory and speed. If you have less ram showing change it to whichever one it is not currently set to and then reboot and your memory should show up. 1 Link to comment Share on other sites More sharing options...
norman_lu Posted November 24, 2015 Share Posted November 24, 2015 i have noticed after several reboots, my memory shows up correctly now, including size & frequency. thanks a lot. Link to comment Share on other sites More sharing options...
Cyberdevs Posted November 24, 2015 Author Share Posted November 24, 2015 Also install VoodooTSCSync.kext and set IOCPUNumber to 3(i5) or 7(i7) For audio check out my thread, a guy posted how to fix it there. Thanks bomerr, It seems my sound card doesn't like to play unless i install voodooHDA. Link to comment Share on other sites More sharing options...
OiCkilL Posted November 24, 2015 Share Posted November 24, 2015 Thanks a lot, But what ever I do I can't get the audio to work, it show the devices and all the input/output sources but still no sound! 1st, copy and overwrite my EFI folder to your EFI partition. 2rd, remove all about AppleHDA lines from Kernel And Kext Patches. At last, download the audio_cloverALC-110.command. Link to comment Share on other sites More sharing options...
Cyberdevs Posted November 24, 2015 Author Share Posted November 24, 2015 1st, copy and overwrite my EFI folder to your EFI partition. 2rd, remove all about AppleHDA lines from Kernel And Kext Patches. At last, download the audio_cloverALC-110.command. I just did that on a fresh OS and the result was I could see the devices in system preferences but there was no sound, none whatsoever. I also tried what bomerr said but still nothing on the other hand voodooHDA 2.8.8 is working just fine which makes me wonder why toledo's script doesn't work for me. Maybe that's because i didn't patch the DSDT for my system but as I understand you didn't use DSDT yourself. The only patch I found in your DSDT was: "Rename HDAS to HDEF" which I used exactly as you did. One more thing SMBIOS for new iMac 17,1 won't work for me so I have to change it to iMac 15,1 and I wonder why?! Another wird thing is every once in a while my system crashes and I get the BIOS error which asked me to load default settings. I patched my BIOS to disable IOAPIC 24-119 Entries. Does any of you guys having the same problem?? Link to comment Share on other sites More sharing options...
bomerr Posted November 24, 2015 Share Posted November 24, 2015 I just did that on a fresh OS and the result was I could see the devices in system preferences but there was no sound, none whatsoever. I also tried what bomerr said but still nothing on the other hand voodooHDA 2.8.8 is working just fine which makes me wonder why toledo's script doesn't work for me. Maybe that's because i didn't patch the DSDT for my system but as I understand you didn't use DSDT yourself. The only patch I found in your DSDT was: "Rename HDAS to HDEF" which I used exactly as you did. One more thing SMBIOS for new iMac 17,1 won't work for me so I have to change it to iMac 15,1 and I wonder why?! Another wird thing is every once in a while my system crashes and I get the BIOS error which asked me to load default settings. I patched my BIOS to disable IOAPIC 24-119 Entries. Does any of you guys having the same problem?? To get audio working with the script you need to first inject the layout ID in clover and add the reset fix. To fix BIOS reset, enable AppleRTC in clover. Link to comment Share on other sites More sharing options...
Cyberdevs Posted November 24, 2015 Author Share Posted November 24, 2015 Hey bomerr, Thanks for the quick reply and the tips. I injected the audio layoutID=1 under Devices section. Should I check ResetHDA?! because when I do my OS restarts automatically. Link to comment Share on other sites More sharing options...
Cyberdevs Posted November 24, 2015 Author Share Posted November 24, 2015 It's finally working thank you guys for all your efforts and helps. So has anyone found a working USB 3.0 solution? All of my USB 3.0 Ports are working with Yassinex's configurations. Thanks again Yassinex. Link to comment Share on other sites More sharing options...
yassinex Posted November 28, 2015 Share Posted November 28, 2015 You can find my GA-Z170X-Gaming 5 Working Solution : Here - Usb 2.0 and 3.0 and All ports mapped ( Expect 2 internal USB3 ports ) - Internal + External SATA working. (Intel + ASMEDIA ASM1061 on PCI-E ) - HDMI Audio Working. - Internal Audio Working. - Lan Network ( Killer 2200 ) Working. - Sleep/Wake... Working. - Cpu SSDT Patch for i7 6700k - Ram OK - CPU/GPU ACPI monitoring ok - Wifi and BT Working oob ( BCM94360CD with PCI-E adapter) - A Nvidia GTX 970 (Strix) working with WebDrivers. - I did not test the Intel Gigabyte LAN - I did not test the Integrated GPU (Intel 530) - I tested 3.1 ports ( Type A and C ): not working ( It uses PCI-E lines ) I'm using the beta BIOS F5c : which activate Thunderbolt 3. You unlock MSR, disable IOAPIC 24-119 entry with this version VS F4 Here it is Thanks : to Pike R Alpha, Andres ZeroCross, Majonéz, RehabMan, Todeleda, Toleda, ammulder,....ad many others. 3 Link to comment Share on other sites More sharing options...
dreamcat4 Posted November 28, 2015 Share Posted November 28, 2015 yassinex: About the thunderbolt. How can I check if board / BIOS has TB3 working? Any new menu / options or something? I have the lesser model next one down on that list - Gaming 3. Which also seems to have a new Beta BIOS published there (co-incidentally also named F5d). It is the same md5 which I posted earlier. There is 1 new BIOS option in the menu about USB 3.1/TB power delivery. Bit I can't see any thunderbolt infos anywhere. Link to comment Share on other sites More sharing options...
Cyberdevs Posted November 28, 2015 Author Share Posted November 28, 2015 You can find my GA-Z170X-Gaming 5 Working Solution : Here - Usb 2.0 and 3.0 and All ports mapped ( Expect 2 internal USB3 ports ) - Internal + External SATA working. (Intel + ASMEDIA ASM1061 on PCI-E ) - HDMI Audio Working. - Internal Audio Working. - Lan Network ( Killer 2200 ) Working. - Sleep/Wake... Working. - Cpu SSDT Patch for i7 6700k - Ram OK - CPU/GPU ACPI monitoring ok - Wifi and BT Working oob ( BCM94360CD with PCI-E adapter) - A Nvidia GTX 970 (Strix) working with WebDrivers. - I did not test the Intel Gigabyte LAN - I did not test the Integrated GPU (Intel 530) - I tested 3.1 ports ( Type A and C ): not working ( It uses PCI-E lines ) I'm using the beta BIOS F5c : which activate Thunderbolt 3. You unlock MSR, disable IOAPIC 24-119 entry with this version VS F4 Here it is Thanks : to Pike R Alpha, Andres ZeroCross, Majonéz, RehabMan, Todeleda, Toleda, ammulder,....ad many others. Thanks a lot yassinex, and thanks to all the gurus for their hard work. Link to comment Share on other sites More sharing options...
yassinex Posted November 29, 2015 Share Posted November 29, 2015 yassinex: About the thunderbolt. How can I check if board / BIOS has TB3 working? Any new menu / options or something? I have the lesser model next one down on that list - Gaming 3. Which also seems to have a new Beta BIOS published there (co-incidentally also named F5d). It is the same md5 which I posted earlier. There is 1 new BIOS option in the menu about USB 3.1/TB power delivery. Bit I can't see any thunderbolt infos anywhere. You can see it on Windows (Device Manager). You have to install drivers. Use the Gaming 7 TB drivers from Gigabyte website. There is no known drivers for TB3 on mac atm. 1 Link to comment Share on other sites More sharing options...
giacomoleopardo Posted November 29, 2015 Share Posted November 29, 2015 Ah. Sorry about that https://anonfiles.com/file/573eed73182d11e3eaa45a33a82e61ff The link doesn't work. Can somebody upload F5d bios for GA Z170X Gaming 3? Link to comment Share on other sites More sharing options...
dreamcat4 Posted November 29, 2015 Share Posted November 29, 2015 Here it is Link to comment Share on other sites More sharing options...
OiCkilL Posted November 30, 2015 Share Posted November 30, 2015 You can find my GA-Z170X-Gaming 5 Working Solution : Here - Usb 2.0 and 3.0 and All ports mapped ( Expect 2 internal USB3 ports ) - Internal + External SATA working. (Intel + ASMEDIA ASM1061 on PCI-E ) - HDMI Audio Working. - Internal Audio Working. - Lan Network ( Killer 2200 ) Working. - Sleep/Wake... Working. - Cpu SSDT Patch for i7 6700k - Ram OK - CPU/GPU ACPI monitoring ok - Wifi and BT Working oob ( BCM94360CD with PCI-E adapter) - A Nvidia GTX 970 (Strix) working with WebDrivers. - I did not test the Intel Gigabyte LAN - I did not test the Integrated GPU (Intel 530) - I tested 3.1 ports ( Type A and C ): not working ( It uses PCI-E lines ) I'm using the beta BIOS F5c : which activate Thunderbolt 3. You unlock MSR, disable IOAPIC 24-119 entry with this version VS F4 Here it is Thanks : to Pike R Alpha, Andres ZeroCross, Majonéz, RehabMan, Todeleda, Toleda, ammulder,....ad many others. You can find my GA-Z170X-Gaming 5 Working Solution : Here - Usb 2.0 and 3.0 and All ports mapped ( Expect 2 internal USB3 ports ) - Internal + External SATA working. (Intel + ASMEDIA ASM1061 on PCI-E ) - HDMI Audio Working. - Internal Audio Working. - Lan Network ( Killer 2200 ) Working. - Sleep/Wake... Working. - Cpu SSDT Patch for i7 6700k - Ram OK - CPU/GPU ACPI monitoring ok - Wifi and BT Working oob ( BCM94360CD with PCI-E adapter) - A Nvidia GTX 970 (Strix) working with WebDrivers. - I did not test the Intel Gigabyte LAN - I did not test the Integrated GPU (Intel 530) - I tested 3.1 ports ( Type A and C ): not working ( It uses PCI-E lines ) I'm using the beta BIOS F5c : which activate Thunderbolt 3. You unlock MSR, disable IOAPIC 24-119 entry with this version VS F4 Here it is Thanks : to Pike R Alpha, Andres ZeroCross, Majonéz, RehabMan, Todeleda, Toleda, ammulder,....ad many others. Great thanks! I lose win10 activation when I flash the beta BIOS. So, I keep my BIOS in latest stable, but working fine. Link to comment Share on other sites More sharing options...
giacomoleopardo Posted November 30, 2015 Share Posted November 30, 2015 Here it is Thank you! Link to comment Share on other sites More sharing options...
beatles4 Posted December 6, 2015 Share Posted December 6, 2015 Is there any reason why the gaming 7 motherboard wouldn't work as well as the gaming 5? Link to comment Share on other sites More sharing options...
Cyberdevs Posted December 6, 2015 Author Share Posted December 6, 2015 Is there any reason why the gaming 7 motherboard wouldn't work as well as the gaming 5? As far as I know there are some differences between Gaming 5 and Gaming 7 which are in Memory support, HDMI 2.0, ASMedia® ASM1061 Controller, etc... You can see the whole comparison in here: http://www.gigabyte.com/products/comparison/list.aspx?ck=2&pids=5481,5498 At first when my attempts failed to install El Capitan on my new Skylake computer I took a shot at good old Yosemite and find out that all my USB 2.0 and 3.0 ports are working. I didn't test USB 3.1 and USB TypeC. everything worked just fine. Yassinex posted his EFI and Config files for EL Capitan and I tested them. Everything works just fine on my computer now and I migrated from Yosemite to El Capitan. You can give Yassinex's folder a try and see how it works out. Link to comment Share on other sites More sharing options...
beatles4 Posted December 6, 2015 Share Posted December 6, 2015 yah, after a lot of research I think I am just going to go with the gaming 5. The reason I was favoring the 7 over the 5 was because of the fact that the 7 now has thunderbolt support but it looks like that might be coming to the 5. Other than that I see no reason to not want the 5 over the 7. To me they are almost the same board with the exception of the audio and usb 2 support which isn't an issue for me. edit: after some more research about the audio option on the 7 I have decided that I will be avoiding the 7 in favor of the 5 or possibly the ud5 th. Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted December 7, 2015 Share Posted December 7, 2015 Z170X-Gaming 7 is here Link to comment Share on other sites More sharing options...
Recommended Posts