Blacky Posted January 17, 2016 Share Posted January 17, 2016 Now Volume control worked and sound is worked. 4 output worked 2 input worked Set DSDT LayoutID=9 Thanks for all hard work. I have reinstalled OSX. Took me a while to get everything working as before. Your kext like the ones before, gets installed, I get the volume icon and outputs and all but whenever I try to play anything be it flash or iTunes, it simply refuses to do the playback. I am lost as to what could be the problem. Maybe something I checked in Clover that I shouldn't have ? On the other hand VoodooHDA works fine. EDIT: What SMBIOS are you guys using? I am using 6,1 . Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted January 17, 2016 Share Posted January 17, 2016 Blacky : Can you send me your dsdt or Clover folder?? I want to check your problem. Link to comment Share on other sites More sharing options...
Blacky Posted January 17, 2016 Share Posted January 17, 2016 Blacky : Can you send me your dsdt or Clover folder?? I want to check your problem. With pleasure! http://www.mediafire.com/download/8zc4k4bvke7jdb9/EFI.zip Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted January 17, 2016 Share Posted January 17, 2016 With pleasure! http://www.mediafire.com/download/8zc4k4bvke7jdb9/EFI.zip Can you give information about your computer specification?? Please edit your signature profile Link to comment Share on other sites More sharing options...
Blacky Posted January 17, 2016 Share Posted January 17, 2016 Oh, will update in a minute. GA-X99-Gaming 5P - Atheros 2200e Network Card - Creative Core3D Sound Card (CA0132) Intel Core i7-5820K @ 4.5 GHz 16 GB RAM - 3000 MHz GV-N75TOC-2GL (Gigabyte 750 Ti) Link to comment Share on other sites More sharing options...
buyjoey Posted January 17, 2016 Share Posted January 17, 2016 Now Volume control worked and sound is worked. 4 output worked 2 input worked Set DSDT LayoutID=9 Thanks for all hard work. Hi Sir! I am using Creative codec too, Basically, I was using Andrea's Audio kext from his post. But the problem is no volume control working. May I use your kext for my system? How can I use it? Just put this kext file in the EFI/Clover/Kext/10.11.2 folder? or Should I use it by Kext utility? Should I remove all VoodooHDA files? or Remove it only in the kext folder? Sorry I am so noob. Everything working good to me except Volume controller. Please Help me Sir! Joe Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted January 17, 2016 Share Posted January 17, 2016 Oh, will update in a minute. GA-X99-Gaming 5P - Atheros 2200e Network Card - Creative Core3D Sound Card (CA0132) Intel Core i7-5820K @ 4.5 GHz 16 GB RAM - 3000 MHz GV-N75TOC-2GL (Gigabyte 750 Ti) I see that you used "npci=0x2000". This bootflag sometime can make audio problem CMIIWW How about to delete it?? Stuck at "PCI Configuration begin"???? Link to comment Share on other sites More sharing options...
Blacky Posted January 17, 2016 Share Posted January 17, 2016 I see that you used "npci=0x2000". This bootflag sometime can make audio problem CMIIWW How about to delete it?? Stuck at "PCI Configuration begin"???? Yes! Exactly. Can't boot without it. Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted January 17, 2016 Share Posted January 17, 2016 Creative-CA0132 Remove VoodooHDA Install to EFI/Clover/Kext/10.11 Set DSDT LayoutID=9 II nstall clover UEFI mode. If Apple make an update,, then your AppleHDAHardwareConfigDriver.kext will be overwritten with new file , then will be no sound, and for Layout.xml.zlib + Platform.xml.zlib will be overwritten too, try to change "Layoutx.zml.zlib and Platform.zml.zlib" then insert patch OTF "XML to ZML" from Abxite's Method is the solution. ==== No worry for no sound after Update ==== So my reason to make "Creative-CA0132.kext" with info.plist inside of it because it's contain "HDAConfigDefault" of AppleHDAHardwareConfigDriver.kext. So, if you try same method like me,, then you have no worry about Apple Update Link to comment Share on other sites More sharing options...
Blacky Posted January 17, 2016 Share Posted January 17, 2016 If Apple make an update,, then your AppleHDAHardwareConfigDriver.kext will be overwritten with new file , then will be no sound, and for Layout.xml.zlib + Platform.xml.zlib will be overwritten too, try to change "Layoutx.zml.zlib and Platform.zml.zlib" then insert patch OTF "XML to ZML" from Abxite's Method is the solution. ==== No worry for no sound after Update ==== So my reason to make "Creative-CA0132.kext" with info.plist inside of it because it's contain "HDAConfigDefault" of AppleHDAHardwareConfigDriver.kext. So, if you try same method like me,, then you have no worry about Apple Update I think your method is better Andres, however until then I need to figure out what's preventing my playback. Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted January 17, 2016 Share Posted January 17, 2016 With pleasure! http://www.mediafire.com/download/8zc4k4bvke7jdb9/EFI.zip Try this, Edited : i upload new configuration. EFI.zip Link to comment Share on other sites More sharing options...
nmano Posted January 17, 2016 Share Posted January 17, 2016 Creative-CA0132 Remove VoodooHDA Install to /System/Library/Extensions via Easykext Utility Set DSDT LayoutID=9 II nstall clover UEFI mode. Link to comment Share on other sites More sharing options...
buyjoey Posted January 17, 2016 Share Posted January 17, 2016 Creative-CA0132 Remove VoodooHDA Install to /System/Library/Extensions via Easykext Utility Set DSDT LayoutID=9 II nstall clover UEFI mode. Thank you for hard work Myron and were capful and Andres zero cross. So, DSDT part. Actually, I have no DSDT setting in my system,, Even don't know how to install DSDT or change it if I have it already. I can remove VoodooHDA Kext from the folder name 10.11 And put your Kext into the same folder. Audio is gone now TT The folder has AppleHDAdisabler file too. Should I remove it? Joe. Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted January 17, 2016 Share Posted January 17, 2016 So, DSDT part. Actually, I have no DSDT setting in my system,, Even don't know how to install DSDT or change it if I have it already. I can remove VoodooHDA Kext from the folder name 10.11 And put your Kext into the same folder. Audio is gone now TT The folder has AppleHDAdisabler file too. Should I remove it? Joe. Send me / Upload your Clover Folder,, I want to help Link to comment Share on other sites More sharing options...
buyjoey Posted January 17, 2016 Share Posted January 17, 2016 AppleHDAPatcher for Creative-CA0132 Don’t worry about apple update. every update just drop ori AppleHDA.kext to AppleHDAPatcher to right click show package contants just replace in Resources Just open AppleHDAPatcher just drop there my Creative-CA0132 files thats it. its make patched AppleHDA. All hard work to Mirone. Remove VoodooHDA Install to /System/Library/Extensions via Easykext Utility Set DSDT LayoutID=9 II nstall clover UEFI mode. If work please conform. Thank you Sir! Do you know how to clean voodooAudio exactly like the brand new installed. I see many things in my machine related to VoodooHDA. And I think I don't have DSDT. LayoutID=9 means Device ID? Mine is ID = 2 in my Config file. I am so sorry that I am so noobie. I don't know what I am talking about. I just want to make my volume controller working. BTW sound is working with Andrea's VoodooHDA kext. Joe. Link to comment Share on other sites More sharing options...
Blacky Posted January 17, 2016 Share Posted January 17, 2016 Try this, Edited : i upload new configuration. Thank you ! I just tried the new EFI config, unfortunately still no playback. AppleHDA loads properly with volume control and all. If I select my HDMI sound output, then playback works fine. If I change to the Creative Sound card, then the playback stops. Also, when it is unable to do the playback, the console gets flooded with the message: 18/01/16 02:37:27,000 kernel[0]: Sound assertion in AppleHDAController at line 6879 18/01/16 02:37:27,000 kernel[0]: Sound assertion in IOHDAStream at line 384 18/01/16 02:37:27,000 kernel[0]: Sound assertion in AppleHDAController at line 6879 18/01/16 02:37:27,000 kernel[0]: Sound assertion in IOHDAStream at line 384 ........ Link to comment Share on other sites More sharing options...
Blacky Posted January 18, 2016 Share Posted January 18, 2016 @Blacky, have you tried MP3 files maybe it's only a adobe flash issue, if you wanna do more tests you have to install codeccommander + had-verb and enter some terminal commands OK, I downloaded the package. To I put code commander in clover /KEXTS/10.11 ? BTW, the playback problem is in any application, including iTunes. Link to comment Share on other sites More sharing options...
Mirone Posted January 18, 2016 Share Posted January 18, 2016 OK, I downloaded the package. To I put code commander in clover /KEXTS/10.11 ? BTW, the playback problem is in any application, including iTunes. use this in your config.plist: <dict> <key>Comment</key> <string>X99 Chipsets Audio controller</string> <key>Find</key> <data> IIw= </data> <key>Name</key> <string>AppleHDAController</string> <key>Replace</key> <data> II0= </data> Link to comment Share on other sites More sharing options...
wern apfel Posted January 18, 2016 Author Share Posted January 18, 2016 Awesome guys, i've started this topic because i was not able to get this codec to work, then i've decide to patch it by myself. Now it works, but not fully working, to get it fully working i need some more infos like: VoodooHDA, volume control yes, only front and rear HP works, no mic AppleHDA, from post #1, no volume control, no 6 channel, rear HP only buzzing noise Thanks Link to comment Share on other sites More sharing options...
Blacky Posted January 18, 2016 Share Posted January 18, 2016 use this in your config.plist: <dict> <key>Comment</key> <string>X99 Chipsets Audio controller</string> <key>Find</key> <data> IIw= </data> <key>Name</key> <string>AppleHDAController</string> <key>Replace</key> <data> II0= </data> OMG ! It worked! IT WOORKED! Thank you all! Thank you so much! How did you figure it out Mirone ? Link to comment Share on other sites More sharing options...
Mirone Posted January 18, 2016 Share Posted January 18, 2016 OMG ! It worked! IT WOORKED! Thank you all! Thank you so much! How did you figure it out Mirone ? There is no controller, with 0x80868D20 ID (in this case your ID) inside the bin AppleHDAController, but yes ,0x80868C20, this way we do: find: 8680208C Replace: 8680208D The same can be done for other codecs that does not have your driver ID the binary of AppleHDAController, but that does not mean it will work in all cases. you can try replace with other IDs controller and see if any one gives you good result (or perhaps any). 1 Link to comment Share on other sites More sharing options...
Blacky Posted January 18, 2016 Share Posted January 18, 2016 There is no controller, with 0x80868D20 ID (in this case your ID) inside the bin AppleHDAController, but yes ,0x80868C20, this way we do: find: 8680208C Replace: 8680208D The same can be done for other codecs that does not have your driver ID the binary of AppleHDAController, but that does not mean it will work in all cases. you can try replace with other IDs controller and see if any one gives you good result (or perhaps any). I can;t believe I never thought of that. That should have been the first thing for me to check. I guess I suspected that the AppleHDA provided in this topic already had this patch in it. Link to comment Share on other sites More sharing options...
Andres ZeroCross Posted January 18, 2016 Share Posted January 18, 2016 (edited) Congratulation Blacky,, and good work Mirone. You are legend Credits to CA0132 codec patch: wern apfel Edited January 3, 2017 by Allan Link to comment Share on other sites More sharing options...
Blacky Posted January 18, 2016 Share Posted January 18, 2016 Have any of you guys noticed that the bass is almost non-existent with the AppleHDA? I can now try a few more versions that you have been posting here. I have a 2+1 setup and in Windows I have great sound, in OSX the soundwaffer doesn't seem to get any signal. Link to comment Share on other sites More sharing options...
buyjoey Posted January 18, 2016 Share Posted January 18, 2016 Send me / Upload your Clover Folder,, I want to help Thank you Andrea, here is my folder. Joe CLOVER.zip Link to comment Share on other sites More sharing options...
Recommended Posts