fearandleb Posted October 5, 2015 Share Posted October 5, 2015 Hi, anyone know how to get Nec Renesas uPD720200 USB3.0 to work with 10.11? In Yosemite it worked like a charm with the Clover Patches. Vendor-id 1033 Device-id 0194 Subvend-id 15D9 Subdev-id 062C The Device lives on Pex5 and Pex6, but I don´t know how to get it to run. I already had to rename USBE and EUSB to EHC1 and EHC2 in my DSDT to get USB2.0 it to work. It is a Supermicro X9Dai Board. As attachment my current DSDT and IOReg Regards, Archive.zip Link to comment Share on other sites More sharing options...
PippoX0 Posted October 7, 2015 Share Posted October 7, 2015 Hi, on my motherboard GA-H67N-USB3-B3 i have Nec Renesas uPD720200 USB3.0 controller too, and with GenericUSBXHCI.kext it was working up to OSX 10.10.5. Now on El Capitan, due to something that it was changed in USb3 management, it doesn't work anymore. I'm looking for a workaround ( I use Chamaleon but if i find a solution then it could be true also for Clover) See Ya Link to comment Share on other sites More sharing options...
romaincs Posted October 13, 2015 Share Posted October 13, 2015 Hello, same controller, same issue... All usb3 ports are detected as usb2 and are handled by AppleUSBEHCIPCI. I own a Transcend StoreJet hdd. When I plug it to usb2, it works as expected, the led light orange. But when I plug it on usb3 ports, the led light blue as it usualy does in USB3 mode and the hdd never appears in device list. Any chance to get this working soon ? Does it implies a complete rewrite of GenericUSBXHCI ? Or what would the work to do to make it run again ? Link to comment Share on other sites More sharing options...
superkwn Posted October 14, 2015 Share Posted October 14, 2015 Hi, anyone know how to get Nec Renesas uPD720200 USB3.0 to work with 10.11? In Yosemite it worked like a charm with the Clover Patches. Vendor-id 1033 Device-id 0194 Subvend-id 15D9 Subdev-id 062C The Device lives on Pex5 and Pex6, but I don´t know how to get it to run. I already had to rename USBE and EUSB to EHC1 and EHC2 in my DSDT to get USB2.0 it to work. It is a Supermicro X9Dai Board. As attachment my current DSDT and IOReg Regards, Could you please let me know how to use clover patches to make Nec Renesas uPD720200 USB3.0 work in Yosemite? Thanks. Link to comment Share on other sites More sharing options...
Dr. Hurt Posted October 14, 2015 Share Posted October 14, 2015 Till this moment, there is no solution for non-Intel USB 3.0 on 10.11 Chances are there won't be a fix any time soon due to the lack of documentation of the new USB driver architecture. I personally downgraded back to Yosemite. Link to comment Share on other sites More sharing options...
fearandleb Posted October 15, 2015 Author Share Posted October 15, 2015 Could you please let me know how to use clover patches to make Nec Renesas uPD720200 USB3.0 work in Yosemite? Thanks. See attached Screenshot of the Clover Section. (only the entries containing Appleusbxhci) Regards Link to comment Share on other sites More sharing options...
alexanderq Posted October 15, 2015 Share Posted October 15, 2015 @fearandleb can you upload your config.plist. Link to comment Share on other sites More sharing options...
PippoX0 Posted October 16, 2015 Share Posted October 16, 2015 IMHO i think the way to get Nec Renesas uPD720200 USB 3.0 controller working is : 1) DSDT injection ( ECH1 , ECH2, XHC1 rename) -> just done 2) AppleUSBXHCIPCI / AppleUSBXHCI binary patching Looking for ... We have to fix two iusses ( Disable Intel & Fresco Logic USB3.0 controllers check and Disable XHCI 1.0 check ) look here for patched AppleUSBXHCI for 10.10.x and 10.9.x (Thanks Zenith432 and Shiecldk) See Ya 1 Link to comment Share on other sites More sharing options...
superkwn Posted October 17, 2015 Share Posted October 17, 2015 See attached Screenshot of the Clover Section. (only the entries containing Appleusbxhci) Regards @fearandleb It works perfectly. Thank you very much. Link to comment Share on other sites More sharing options...
lexiq Posted October 24, 2015 Share Posted October 24, 2015 @fearandleb It works perfectly. Thank you very much. Something isn't too clear here. Your original question was about how to make Renesas uPD720200 work under Yosemite. Yet this thread is about post installation issues with 10.11. My question is whether you have successfully enabled USB3 on the uPD720200 controller on 10.11 based on superkwn's ID injection method above based on his clover screenshot. Did it work without the need of a patched AppleUSBXHCI kext? ID injection alone did the trick? Link to comment Share on other sites More sharing options...
Viqsi Posted April 3, 2016 Share Posted April 3, 2016 Something isn't too clear here. Your original question was about how to make Renesas uPD720200 work under Yosemite. Yet this thread is about post installation issues with 10.11. My question is whether you have successfully enabled USB3 on the uPD720200 controller on 10.11 based on superkwn's ID injection method above based on his clover screenshot. Did it work without the need of a patched AppleUSBXHCI kext? ID injection alone did the trick? In case you didn't get an answer to this at any other point (or someone else shows up here looking around) - El Capitan appears to have significantly changed things such that fixes in Yosemite w/r/t USB3.0 (some in general, non-Intel in particular) don't necessarily work in El Capitan. The only way I found to get that particular controller working in El Capitan was using RehabMan's updated GenericUSBXHCI.kext (see here: https://github.com/RehabMan/OS-X-Generic-USB3 and for working download: https://bitbucket.org/RehabMan/os-x-generic-usb3/downloads/RehabMan-Generic-USB3-2015-1215.zip). Devices so supported won't show up in System Information.app's USB section, but they'll still work. Hope this helps. 1 Link to comment Share on other sites More sharing options...
pkdesign Posted April 12, 2016 Share Posted April 12, 2016 See attached Screenshot of the Clover Section. (only the entries containing Appleusbxhci) Regards Argh, I so want a solution like this again. This worked like a charm for me under Yosemite. I didn’t upgrade to El Capitan till just last week and I'm almost sorry I did now. First I have to run with SIP disabled all the time and there are all these little problem like USB 3 cards not working! FYI, GenericUSBXHCI didn’t work for me. Was too unreliable. I used this method and I now have working USB 3 but not sure I get full speed. I used this method to get it working: http://www.insanelymac.com/forum/topic/309225-usb-30-on-asus-p8z68-vgen3-asmedia-controller/?p=2185652 1 Link to comment Share on other sites More sharing options...
PippoX0 Posted October 25, 2018 Share Posted October 25, 2018 NEWS Thanks to Chris1111, Nec Renesas uPD720200 USB3.0 works again !! https://github.com/chris1111/USB-3.0-NEC mXHCD.kext -> It works from OSX Mavericks up to macOS Mojave Many many thanks Chris1111 Cheers mXHCD.kext.zip 1 2 Link to comment Share on other sites More sharing options...
bobpedro Posted November 26, 2018 Share Posted November 26, 2018 Doesn't work for me, causes reboot short before or sometimes after login (if you are fast with password). Running OS X Mojave. Link to comment Share on other sites More sharing options...
csdsf Posted February 25, 2019 Share Posted February 25, 2019 On 2018/10/26 at AM2点21分, PippoX0 said: 新闻 感谢Chris1111， Nec Renesas uPD720200 USB3.0再次运行!! https://github.com/chris1111/USB-3.0-NEC mXHCD.kext - >它适用于OSX Mavericks到macOS Mojave 很多人都感谢Chris1111 干杯 mXHCD.kext.zip Great, thank you Link to comment Share on other sites More sharing options...
high.land Posted August 30, 2020 Share Posted August 30, 2020 (edited) Hi all, I have a question regarding this same issue with this same USB 3.0 card, however I'm trying to get this to work on a REAL mac. I have a Mac Mini 2020 and am using the card in a OWC Helios 3 Thunderbolt 3 enclosure. Other cards like SATA cards work just fine, but this particular USB 3.0 card is just not happy. I have installed the driver above but it has had no effect. I can see it in the "/Library/Extensions" folder but was thinking maybe it should also be in the "System/Library/Extensions" but I can't get access to it. How does one get this to work on an actual mac? I am currently running MacOS Catalina 10.5 Would greatly appreciate any input anyone could share. Thankyou Edited August 30, 2020 by high.land Link to comment Share on other sites More sharing options...
protocold Posted January 21, 2021 Share Posted January 21, 2021 Me too, I am trying to use this on a macbook 2011 with Catalina. Does anyone know if this works on the real mac? Link to comment Share on other sites More sharing options...
Recommended Posts