MacPeet Posted April 16, 2016 Share Posted April 16, 2016 Try_V7_AppleHDA_patched_Optiplex790_for_Capitan.kext.zip Link to comment Share on other sites More sharing options...
morpheousman Posted April 18, 2016 Author Share Posted April 18, 2016 Everything is working! except Internal Speaker (Nobody is perfect). Is Injection Method next? Link to comment Share on other sites More sharing options...
MacPeet Posted April 18, 2016 Share Posted April 18, 2016 great I Have the Microphone renamed Line In, then it works. Internal Speaker I had deleted. Am I doing back inside. Try this for Internal Speaker: Edit: File deleted - no longer relevant see post # 801 ... Then I make the Clover patch on the fly. Link to comment Share on other sites More sharing options...
morpheousman Posted April 18, 2016 Author Share Posted April 18, 2016 Internal is in Pane, but does not work. Line Out will run for a while, then will stop, and have to click on speaker out to get line out to work. Link to comment Share on other sites More sharing options...
MacPeet Posted April 18, 2016 Share Posted April 18, 2016 I think the internal speaker is not so important, right? So version 7 is perfect? Then I make the on_the_fly_Patch. OK? 1 Link to comment Share on other sites More sharing options...
morpheousman Posted April 18, 2016 Author Share Posted April 18, 2016 I think the internal speaker is not so important, right? So version 7 is perfect? Then I make the on_the_fly_Patch. OK? That is correct, Internal Speaker is not important. Link to comment Share on other sites More sharing options...
MacPeet Posted April 18, 2016 Share Posted April 18, 2016 on_the_fly_ALC269VB_Capitan.zip AppleHDA to S/L/E (and rebuild Cache) realtekALC to EFI/Clover/kexts/10.11/ and add in config.plist: @Theoprofil My GT610 works only with additional Kext (S/L/E) HDMIAudio.kext.zip 1 Link to comment Share on other sites More sharing options...
Theoprofil Posted April 19, 2016 Share Posted April 19, 2016 GT 610 is not an easy Video card. Although it is nvidia it is not OOB. What kext do you use? I spend a lot of effort to make the card work properly but WITHOUT nvidia web drivers . ONLY with OS X drivers. I am not recommend GT 610 to hackintoshers, no not at all. Link to comment Share on other sites More sharing options...
MacPeet Posted April 19, 2016 Share Posted April 19, 2016 My GT610 works OOB without web driver. Even with web driver she works. Only HDMI audio works with additional Kext. Link to comment Share on other sites More sharing options...
Theoprofil Posted April 19, 2016 Share Posted April 19, 2016 I studied IT 8 years . I work the last 15 years as a developer and every day i learn something new!!! How it is possible to have the same card (is it the same? I have MSI GT 610 with passive heatsink) and try fix this f@cking beast for 7 days, and to testify that your GT 610 works out of the box!!!!! It is f@cking insane . F@cking insane at all!!!! About the sound i had already a patch for my chipset before i buy the card. So when i put the card on the motherboard i have OOB sound. (Maybe because of the patch maybe because it is a kind of an insane logic(?) I have to mention that my problems with GT 610 wasn't on my son's Optiplex 760 but on my Precision 490, but this again doesn't make sense! Because my Precision 490 runs on 10.11.4 . And every Logic board with PCIe x 16 is the same when you put Video cards without UEFI. Or it is not? Oh Madonna mia come and help me pls. EDIT:I did a clean install with 10.11.4 Maybe you upgrade from 10.11.x To 10.11.4 so the drivers suit well (I really don't have some better idea about that beast called GT 610) Link to comment Share on other sites More sharing options...
MacPeet Posted April 19, 2016 Share Posted April 19, 2016 My is a PNY GT610 active cooling (HDMI / DVI / VGA). Operates in the Esprimo p3510 me OOB with 10.11.5 Beta currently. In the DSDT only: Device (PEGP) { Name (_ADR, 0x00010000) Name (_PRW, Package (0x02) { 0x09, 0x05 }) Device (GFX0) { Name (_ADR, Zero) Name (_SUN, One) Method (_DSM, 4, NotSerialized) { Store (Package (0x02) { "hda-gfx", Buffer (0x0A) { "onboard-1" } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } } Device (HDAU) { Name (_ADR, One) Method (_DSM, 4, NotSerialized) { Store (Package (0x02) { "hda-gfx", Buffer (0x0A) { "onboard-1" } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } } Link to comment Share on other sites More sharing options...
Theoprofil Posted April 19, 2016 Share Posted April 19, 2016 i use the dsdt of this guide : http://www.insanelymac.com/forum/topic/307920-guide-clover-dell-precision-690-workstation/ (unfortunately now i am on my work and i can't send you just the dsdt file) But we have a little bit different cards . The heatsink has nothing to do if it is passive or with fan. But the amount of memory make some sense. My GT 610 is 1 GB Ram BUT also yours has 1 GB too. So it is a mystery... You say it is the DSDT. I say it is not.... Link to comment Share on other sites More sharing options...
MacPeet Posted April 19, 2016 Share Posted April 19, 2016 This thread is for DELL Precision 690 Perhaps the DSDT for DELL Precision 490's different? Therefore, perhaps the problems. Link to comment Share on other sites More sharing options...
Theoprofil Posted April 19, 2016 Share Posted April 19, 2016 Absolutely NO. Both systems have the same BIOS (I mean 490 & 690) . For me it is because i did a clean install and Apple must have tune the nvidia drivers on 10.11.4. I am definitely sure you upgrade from 10.11.x to 10.11.4 (This must be a kind of solution to the enigma) Link to comment Share on other sites More sharing options...
morpheousman Posted April 19, 2016 Author Share Posted April 19, 2016 on_the_fly_ALC269VB_Capitan.zip AppleHDA to S/L/E (and rebuild Cache) realtekALC to EFI/Clover/kexts/10.11/ and add in config.plist: 269.png @Theoprofil My GT610 works only with additional Kext (S/L/E) HDMIAudio.kext.zip On_The_Fly tested and working 100%. Thank You!!! 2 Link to comment Share on other sites More sharing options...
polyzargone Posted April 21, 2016 Share Posted April 21, 2016 Time to move on to next OS X Link to comment Share on other sites More sharing options...
turbointhailand Posted April 21, 2016 Share Posted April 21, 2016 Since, at least for the DT, the 780/760 only has 1 PCI-e slot, what wifi adapters are you guys using? I'm upgrading from Yosemite and thinking of ditching my Ralink Usb N dongle in favor of something more reliable, preference would be a PCI card (legacy) that works natively as an airport card, but essentially if you have a glowing recommendation Id love to hear about it. Link to comment Share on other sites More sharing options...
morpheousman Posted April 26, 2016 Author Share Posted April 26, 2016 Hey Guys, did we ever find a way to make system info show Graphics as HD5450 without messing anything else up, like HDMI Sound? Link to comment Share on other sites More sharing options...
MacPeet Posted April 26, 2016 Share Posted April 26, 2016 look here: #723 Link to comment Share on other sites More sharing options...
polyzargone Posted April 26, 2016 Share Posted April 26, 2016 Hey Guys, did we ever find a way to make system info show Graphics as HD5450 without messing anything else up, like HDMI Sound? look here: #723 Unfortunately, I'm afraid it won't work with that method. AFAIK, the System Info will only report "AMD Radeon HD 5450" when the correct framebuffer is loaded. So you'll have to choose another one than Shrike (i.e Eulemur which breaks both HDMI audio and sleep) hence, messing up with some things . Link to comment Share on other sites More sharing options...
Kotek Besar Posted April 26, 2016 Share Posted April 26, 2016 Hi folks. I just bought this for £50: http://www.ebay.co.uk/itm/222092435370 Good choice? Link to comment Share on other sites More sharing options...
polyzargone Posted April 26, 2016 Share Posted April 26, 2016 Hi folks. I just bought this for £50: http://www.ebay.co.uk/itm/222092435370 Good choice? Sure, I use one . You just need an additional graphic card such as the AMD Radeon HD 5450 (fully supported in this guide) or any other card that fits in the SFF case. 1 Link to comment Share on other sites More sharing options...
Kotek Besar Posted April 26, 2016 Share Posted April 26, 2016 Sure, I use one . You just need an additional graphic card such as the AMD Radeon HD 5450 (fully supported in this guide) or any other card that fits in the SFF case. Thank you! Otherwise, I can buy this 780 for £37 (best offer): http://www.ebay.co.uk/itm/Dell-Optiplex-780-SFF-Windows-7-Intel-Core-2-Duo-3GHz-4GB-250GB-HDD-/252368267656? So, 760 for £50 or 780 for £37. Which would you choose? Link to comment Share on other sites More sharing options...
polyzargone Posted April 26, 2016 Share Posted April 26, 2016 Well the 780 has more storage but a very very slightly less powerful CPU. But it's also cheaper. So given the fact that both 760/780 work perfect with the guide, obviously I would choose the 780. And you could save your extra £13 to buy the GFX card . 1 Link to comment Share on other sites More sharing options...
Kotek Besar Posted April 26, 2016 Share Posted April 26, 2016 Well the 780 has more storage but a very very slightly less powerful CPU. But it's also cheaper. So giving the fact that both 760/780 work perfect with the guide, obviously I would choose the 780. And you could save your extra £13 to buy the GFX card . Thank you. Actually, I don't really care about the storage as I will be installing an SSD anyway. The slightly less powerful CPU should be negligible, right? Link to comment Share on other sites More sharing options...
Recommended Posts