polyzargone Posted October 10, 2015 Share Posted October 10, 2015 Well, if you use the config.plist from the .zip file, you should have things (which shouldn't be there by default IMHO) like Dual Link set to 1, FB Name Shrike, NVCAP, VRAM, Video ports, etc. full of 0… Just remove everything and that's it… Link to comment Share on other sites More sharing options...
jakeyg1 Posted October 10, 2015 Share Posted October 10, 2015 okay done that and i will try and install now on my dell BRB Okay did same thing and got this in attachment Link to comment Share on other sites More sharing options...
polyzargone Posted October 10, 2015 Share Posted October 10, 2015 What type of display/video port ? Also, you should wait a little bit. It can take a moment before the installer launch… Link to comment Share on other sites More sharing options...
jakeyg1 Posted October 10, 2015 Share Posted October 10, 2015 I'm using the HDMI port on my radeon HD5450 card and after that in the attachment all that happens is that i get a no signal icon on monitor so wait about 5 mins and still nothing Link to comment Share on other sites More sharing options...
polyzargone Posted October 10, 2015 Share Posted October 10, 2015 Set Eulemur in FB Name in Graphics. Link to comment Share on other sites More sharing options...
jakeyg1 Posted October 10, 2015 Share Posted October 10, 2015 what with all of the other graphics options removed ? Link to comment Share on other sites More sharing options...
polyzargone Posted October 10, 2015 Share Posted October 10, 2015 Just add Eulemur in FB Name. That's it. Link to comment Share on other sites More sharing options...
jakeyg1 Posted October 10, 2015 Share Posted October 10, 2015 Just done and tried and get same result Link to comment Share on other sites More sharing options...
polyzargone Posted October 10, 2015 Share Posted October 10, 2015 Well, try with another video port… DVI or VGA. This should work for HDMI. It has been tested. Maybe it's your HDMI cable … Link to comment Share on other sites More sharing options...
jakeyg1 Posted October 10, 2015 Share Posted October 10, 2015 Well my hdmi cable works with my windows computer but ill try anyway hang on Link to comment Share on other sites More sharing options...
MacPeet Posted October 10, 2015 Share Posted October 10, 2015 onboard graphics disabled in the BIOS? Link to comment Share on other sites More sharing options...
jakeyg1 Posted October 10, 2015 Share Posted October 10, 2015 Right other cables produce same result and yes I have on board graphics disabled Link to comment Share on other sites More sharing options...
MacPeet Posted October 10, 2015 Share Posted October 10, 2015 ok, but something seems to be wrong DSDT stored properly? Clover properly adjusted and adapted SMBios? Clover installed correctly? check everything again Link to comment Share on other sites More sharing options...
jakeyg1 Posted October 10, 2015 Share Posted October 10, 2015 okay ill recreate the USB on a New 16gb usb Okay so I recreated the USB and it does the exact same thing Link to comment Share on other sites More sharing options...
InfintyGhost Posted October 10, 2015 Share Posted October 10, 2015 have you tried booting the setup from usb without using any boot flags ? If so do you get the apple logo up ? Cause I had to this problem but it was showing a prohibited logo. If you get the prohibed logo. You would want to recreate the usb making sure you following each step of the guide Link to comment Share on other sites More sharing options...
jakeyg1 Posted October 10, 2015 Share Posted October 10, 2015 Right I tried taking the graphics card out and everything works without the graphics card but when I put the graphics card back in it can't boot any ideas ? Link to comment Share on other sites More sharing options...
polyzargone Posted October 10, 2015 Share Posted October 10, 2015 Are you absolutely sure it's an AMD Radeon HD 5450 ? Do you have a link where we could have a look to its full specs ? Because there's no reason you can't install with the supplied DSDT. You could also give a try to the Generic DSDT but you'll need to add 0x68E01002 in Fake ID and set InjectATI in Graphics. Link to comment Share on other sites More sharing options...
jakeyg1 Posted October 10, 2015 Share Posted October 10, 2015 Here's the link: http://m.dabs.com/products/sapphire-technology-amd-radeon-hd-5450-650mhz-1gb-ddr3-pci-express-dvi--low-profile--11166-02-20r-6L96.html?utm_source=google&utm_medium=ppc%20product%20search&utm_campaign=Components%20and%20Storage%20-%20Graphics,%20TV%20Tuners%20and%20I/O%20-%20Graphics&gclid=CIuo7fzUuMgCFRFmGwod0tkOmQ I'll give the generic dsdt a try Link to comment Share on other sites More sharing options...
jakeyg1 Posted October 10, 2015 Share Posted October 10, 2015 The generic dsdt won't work ethier oh godd what's wrong with this thing lmao Link to comment Share on other sites More sharing options...
polyzargone Posted October 10, 2015 Share Posted October 10, 2015 The card works on Windows ? Link to comment Share on other sites More sharing options...
jakeyg1 Posted October 10, 2015 Share Posted October 10, 2015 Yes I thought that to but I checked and it's fine Link to comment Share on other sites More sharing options...
polyzargone Posted October 10, 2015 Share Posted October 10, 2015 Ok.So you can install OS X without the card, right ? What if you connect it after the install is done ? Same ? Also, could you check this in Windows : Link to comment Share on other sites More sharing options...
jakeyg1 Posted October 10, 2015 Share Posted October 10, 2015 I get this in attachment when I connect after install of osx and ill have to check the windows thing tomorrow as my brother is using the windows pc for college so therefore can't create a windows usb installer Link to comment Share on other sites More sharing options...
polyzargone Posted October 10, 2015 Share Posted October 10, 2015 Actually, everything looks good for me. Those "glitches" on the screen also appears on my system, just before I reach the desktop. So your problem is that when you reach this step, monitor turns off and there's no signal anymore ? Right ? At first, I thought it was the HDMI video port the culprit but now, I'm wondering if it's not something else like incorrect monitor's EDID recognition by OS X which is another and much more annoying issue… You could try this if possible : Remove the Radeon, boot OS X and enable VNC remote control. Looks like this in french localization : Then shut down the Optiplex, put the Radeon Back and let the OS boot until it reaches the desktop. You won't see anything but you could remote control the Optiplex on another Mac/Hack/PC with built-in remote access in OS X or VNC viewer software on Windows. That way, you could check if the Radeon is correctly enabled in System Profiler with full VRAM. Else, you could check EDID option in Graphics in Clover Configurator and check InjectATI. Sorry but right now, that's my best . Link to comment Share on other sites More sharing options...
jakeyg1 Posted October 10, 2015 Share Posted October 10, 2015 Okay well I've only got one power cable and hdmi which I'm sharing between computers so I can't do that remote control but imma try the clover configuration now Oh and I very sorry but I just noticed after about ten minutes of the the monitor loosing signal the computer reboots it self Edit: the pc only reboots it self sometimes and the clove reconfiguration didn't work lmao I generally think I'm going mad haha Link to comment Share on other sites More sharing options...
Recommended Posts