ssprod Posted March 2, 2017 Share Posted March 2, 2017 What is happening, or not happening with auto-wake? https://support.apple.com/kb/PH25522?viewlocale=en_US&locale=en_US Jaymack, system goes to sleep, then immediately wakes up on it's own. Link to comment Share on other sites More sharing options...
jaygrid Posted March 2, 2017 Share Posted March 2, 2017 I´d tried your EFI folder and my computer do not start up, I´m back to my EFI and my cmos reset problem But sleep works perfect Link to comment Share on other sites More sharing options...
jaymack Posted March 2, 2017 Share Posted March 2, 2017 Jaymack, system goes to sleep, then immediately wakes up on it's own. What settings do you have in energy saver? Link to comment Share on other sites More sharing options...
ssprod Posted March 3, 2017 Share Posted March 3, 2017 What settings do you have in energy saver? Jaymack.. #1-Put hard Disks To sleep. #2-Wake for Ethernet network access.. I've experimented with checking/unchecking to no avail. Thanks! I´d tried your EFI folder and my computer do not start up, I´m back to my EFI and my cmos reset problem But sleep works perfect jaygrid... does the system boot to clover, and kernel panic? Link to comment Share on other sites More sharing options...
jaygrid Posted March 4, 2017 Share Posted March 4, 2017 What settings do you have in energy saver? It´s in Spanish but you understand I think Jaymack.. #1-Put hard Disks To sleep. #2-Wake for Ethernet network access.. I've experimented with checking/unchecking to no avail. Thanks! jaygrid... does the system boot to clover, and kernel panic? With your EFI folder, boot to clover and the black screen with the apple and the bar is there for ever (or at least for long time), I don´t even check verbose mode to see what happen. I put back mine and boot normally, as I said sleep works perfect so no so bad. I´d go back to Capitan but photo library is not compatible, hope next release solve this. By the way, when I have a Cmos reset is like this: sometimes when I shutdown the system reboot itself but stop in the list of drives (with F1 to save in the bottom) as if i´d change the config and when I go in bios config, the option network service boot is enable and hyperthreading is disable. I always disable network boot because if not you get a spontaneous reboot. Only to be sure we all are talking about the same Link to comment Share on other sites More sharing options...
jaymack Posted March 4, 2017 Share Posted March 4, 2017 Try this patched kext Patched_10.12_AppleRTC.kext.zip 1 Link to comment Share on other sites More sharing options...
ssprod Posted March 5, 2017 Share Posted March 5, 2017 Problem of instant wake after sleep is solved! I patched my DSDT w/ Rehab's USB3_PRW 0x06 patch and voila! In addition, my external USB Audio Interface (Alesis ControlHUB) is preventing my system to stay in "sleep" mode. Thanks, and I'd be happy to follow this forum and improve the Z Series going forward. Link to comment Share on other sites More sharing options...
jaygrid Posted March 6, 2017 Share Posted March 6, 2017 With Halt enaber on and patched kext in 10.12 and Other folder two shutdowns without problem but who knows 1 Link to comment Share on other sites More sharing options...
corei3cpu Posted March 11, 2017 Share Posted March 11, 2017 Greetings! HPZ600 Workstation ( 2 x Xeon5520's + Nvidia K600 + 12GB Ram + 500GB SataHD) Been running 10.12.3 Sierra successfully with patched AppleICPM and re-tuned FakeSMC based off of Mac Pro 5,1. My only issue presently is the system auto-wakes immediately from sleep. Was able to extract native DSDT, but I've probably not applied the proper patches. Any suggestions or advice would be most appreciated! go into the bios and disable NIC - wake from lan Also in your OS-X settings and in Windows settings also if you have dual boot. I use to have this same problem. Other wise every time your computer goes to sleep the lan activity will immediately wake it up. Link to comment Share on other sites More sharing options...
jaymack Posted March 13, 2017 Share Posted March 13, 2017 go into the bios and disable NIC - wake from lan Also in your OS-X settings and in Windows settings also if you have dual boot. I use to have this same problem. Other wise every time your computer goes to sleep the lan activity will immediately wake it up. ssprod has already posted that he has wake up from LAN disabled. Link to comment Share on other sites More sharing options...
ZorroZZ Posted March 19, 2017 Share Posted March 19, 2017 successfully patched appleintelcpupowermanagement.kext http://www.insanelymac.com/forum/files/file/132-aicpmpatch/ arch: x86_64 delta: 1 0000000000009efd movl $0x000000e2,%ecx 0000000000009f02 wrmsr delta: 1 0000000000009fb0 movl $0x000000e2,%ecx 0000000000009fb5 wrmsr delta: 1 0000000000009fc6 movl $0x000000e2,%ecx 0000000000009fcb wrmsr delta: 1 000000000000a0e2 movl $0x000000e2,%ecx 000000000000a0e7 wrmsr delta: 1 000000000000aa5e movl $0x000000e2,%ecx 000000000000aa63 wrmsr delta: 1 000000000000b4d6 movl $0x000000e2,%ecx 000000000000b4db wrmsr delta: 1 000000000000b8f3 movl $0x000000e2,%ecx 000000000000b8f8 wrmsr delta: 1 00000000000114e4 movl $0x000000e2,%ecx 00000000000114e9 wrmsr delta: 1 0000000000012969 movl $0x000000e2,%ecx 000000000001296e wrmsr delta: 1 0000000000013b13 movl $0x000000e2,%ecx 0000000000013b18 wrmsr i'm not using the NullCPUpowermanagement.kext any more macOS Sierra 10.12.4 I did it as well... :-) and it works 1 Link to comment Share on other sites More sharing options...
GuitarFa12 Posted March 27, 2017 Share Posted March 27, 2017 Hi, finally yesterday I got OS X El Capitan in my HP Z400 and it's very stable. But I have two problems: 1) When I shutdown my HP, it restarts every time. 2) Audio doesn't works, and I don't know how to solve it. I think that I can solve this problems with Clover configurator, but I don't know how to do it. Can you help me please? Thank you Link to comment Share on other sites More sharing options...
THEOLDSHARK Posted March 27, 2017 Share Posted March 27, 2017 Hi, finally yesterday I got OS X El Capitan in my HP Z400 and it's very stable. But I have two problems: 1) When I shutdown my HP, it restarts every time. 2) Audio doesn't works, and I don't know how to solve it. I think that I can solve this problems with Clover configurator, but I don't know how to do it. Can you help me please? Thank you Hi, do you use a patched DSDT? Link to comment Share on other sites More sharing options...
jaymack Posted March 27, 2017 Share Posted March 27, 2017 Hi, finally yesterday I got OS X El Capitan in my HP Z400 and it's very stable. But I have two problems: 1) When I shutdown my HP, it restarts every time. 2) Audio doesn't works, and I don't know how to solve it. I think that I can solve this problems with Clover configurator, but I don't know how to do it. Can you help me please? Thank you In Bios disable wakeup on LAN. Install Voodoo to enable internal sound. Make sure onboard sound is turned on in BIOS. VoodooHDA-v2.8.7.pkg (1).zip DSDT.aml.zip 1 Link to comment Share on other sites More sharing options...
GuitarFa12 Posted March 27, 2017 Share Posted March 27, 2017 Hi, do you use a patched DSDT? I used the chris1111's app: Clover Dell Precision 690 to create the boot USB, and I used the same app with the post install. So, I used the DSDT which is included it. 1 Link to comment Share on other sites More sharing options...
jaymack Posted March 27, 2017 Share Posted March 27, 2017 I used the chris1111's app: Clover Dell Precision 690 to create the boot USB, and I used the same app with the post install. So, I used the DSDT which is included it. See the post above this one #951 1 Link to comment Share on other sites More sharing options...
THEOLDSHARK Posted March 27, 2017 Share Posted March 27, 2017 I used the chris1111's app: Clover Dell Precision 690 to create the boot USB, and I used the same app with the post install. So, I used the DSDT which is included it. jaymack already postet a solution ;-) http://www.insanelymac.com/forum/topic/307064-hp-z400z600z800-workstations-os-x-1010x1011x-installation/page-48?do=findComment&comment=2392514 1 Link to comment Share on other sites More sharing options...
GuitarFa12 Posted March 27, 2017 Share Posted March 27, 2017 I changed the DSDT file in the EFI partition and I installed the Voodoo file. Now I can see some connections in Preferences/Sound. I choose one and I start to listen something, but one second later, the sound stops. And I have another problem, because, now that I can see sound connections, I can't see my firewire sound card. I saw in a post a solution: erase AppleHPET.kext of system/library/extensions but it didn't work for me. Some ideas? Thank you so much for your help Link to comment Share on other sites More sharing options...
jaymack Posted March 27, 2017 Share Posted March 27, 2017 I changed the DSDT file in the EFI partition and I installed the Voodoo file. Now I can see some connections in Preferences/Sound. I choose one and I start to listen something, but one second later, the sound stops. And I have another problem, because, now that I can see sound connections, I can't see my firewire sound card. I saw in a post a solution: erase AppleHPET.kext of system/library/extensions but it didn't work for me. Some ideas? Thank you so much for your help Are you trying to use the onboard sound? Link to comment Share on other sites More sharing options...
GuitarFa12 Posted March 27, 2017 Share Posted March 27, 2017 Are you trying to use the onboard sound? I'm trying to use onboard sound first, but how I can't do it, I tried to use my firewire sound card, but I failed too... Link to comment Share on other sites More sharing options...
jaymack Posted March 27, 2017 Share Posted March 27, 2017 I'm trying to use onboard sound first, but how I can't do it, I tried to use my firewire sound card, but I failed too... Try using onboard only with Voodoohda. Delete AppleHDA.kext Link to comment Share on other sites More sharing options...
raycillo Posted March 28, 2017 Share Posted March 28, 2017 Hi friends, i need to update Clover, That is, to install on the EFI partition(ESP) and not on the main partition. What is the process...When clover displays the "Where to install" options, the EFI partition does not appear. Thanks... Link to comment Share on other sites More sharing options...
jaymack Posted March 28, 2017 Share Posted March 28, 2017 Hi friends, i need to update Clover, That is, to install on the EFI partition(ESP) and not on the main partition. What is the process...When clover displays the "Where to install" options, the EFI partition does not appear. Thanks... Have you tried mounting the EFI? Link to comment Share on other sites More sharing options...
jaymack Posted March 28, 2017 Share Posted March 28, 2017 I'm trying to use onboard sound first, but how I can't do it, I tried to use my firewire sound card, but I failed too... kexts.zip Link to comment Share on other sites More sharing options...
Blaggah Posted March 28, 2017 Share Posted March 28, 2017 Any web drivers for 10.12.4 yet? Link to comment Share on other sites More sharing options...
Recommended Posts