jaygrid Posted May 17, 2016 Share Posted May 17, 2016 raycillo, this is my dsdt, is working for me, come from Rockey so you must have it, but maybe you can try with it I have no idea if it is compatible with your hw but i have Z600 too DSDT.aml.zip 1 Link to comment Share on other sites More sharing options...
raycillo Posted May 17, 2016 Share Posted May 17, 2016 Jay, Thk. My Z600 is one processor E5520, and Quadro 2000, 12Gb Ram.. I try in the night and comment the result.. I hope that if, I hope that if... I'm to give up Link to comment Share on other sites More sharing options...
MacUser2525 Posted May 17, 2016 Share Posted May 17, 2016 This is my configuration Bios... is bad? When I had my z800 enabling that Enhanced Intel Turbo Boost would lead to a panic every time I booted with it, the one above the normal enabled would work with no problems. So try disabling that and perhaps the VT(x) virtualization as well. Also if I wanted to boot off internal drive not on my add-in Marvel PCI-e SATA6 card the drive had to be on the white ports the SAS controller ROM enabled I think it was called the blue SATA ports would never work. Link to comment Share on other sites More sharing options...
jaygrid Posted May 17, 2016 Share Posted May 17, 2016 upgraded to 10.11.5 without problem with combo update Facetime do not work either Take more than 20 min so don't do in a hurry Hi aygrid I am still working on FaceTime as soon as possible i will give a good news Thanks Rockey Link to comment Share on other sites More sharing options...
chris1111 Posted May 17, 2016 Share Posted May 17, 2016 Off topic ******just for you El Capitan User for testing Your AppleHDA OS X El Capitan 10.11.5 this is two of my preferred Songs This is a App I build for song! This is for Cool and Relax!! Enjoy 2 Link to comment Share on other sites More sharing options...
raycillo Posted May 18, 2016 Share Posted May 18, 2016 YEAHHHHHH Init.... El Capitan Starttttttt.... I'm happpy.. The problem is the DSDT... i try with DSDT from Rockey.... Quiet... nothing, after try with DSDT from JayGrid.... ANDDDD booottttt. I install, reboot put flag nv_disable=1... y yeah, boot OK, but slowww and no nvidia... but boottt.... I change paramethers in the config.plist, 3 bank of memory, and string in the smbios... I run NVIDIA® WebDriver Updater, and cudadriver-7.5.26-macos, video is Ok. But is slow... how create a DSDT, i think , that is slow for use a DSDT a little bit different.. Now, How i do create a DSDT personalized? I update Clover to Clover_v2.3k_r3526, and El Capitan to 10.11.5, no problem.... Note: jaygrid, you have a sound in your Z600?, Thank for Rockey12, very very very much... for your patience and dedication... Thank for Chris1111, for your help and your great and powerful tools... Thank to the Clover team, for your tools, is more easy the life... and thanks a JayGrid for your highly anticipated and important DSDT And now, to install the sound and wifi card.... 2 Link to comment Share on other sites More sharing options...
jaygrid Posted May 18, 2016 Share Posted May 18, 2016 Raycillo, yes I have sound but I think i use a VoodooHDA kext. it is in the kext folder i posted two days ago Enjoy!! Link to comment Share on other sites More sharing options...
raycillo Posted May 18, 2016 Share Posted May 18, 2016 which is better? applehda or VoodooHDA? I do use VoodooHDA.. works. My Wifi are: RaLink RT2571WF (USB) RTL8185 (PCI) RTL8190 (PCI) TP-link TL-WN350G TrendNet TEW-443pi Any work... How to create a own DSDT file own, from DSDT jaygrid or from clean DSDT? Improve PC performance? Thanks... Link to comment Share on other sites More sharing options...
jaygrid Posted May 18, 2016 Share Posted May 18, 2016 These are things i can't help you For me if sound come out at good quality is good enough I don´t use wifi As i told you my dsdt come from Rockey and I didn't touch it, its work 1 Link to comment Share on other sites More sharing options...
raycillo Posted May 18, 2016 Share Posted May 18, 2016 Thanks Rockey12.. I work in it... Getting better performance and install my tools, photoshop, xcode, dash, VM, etc.... I'm learning how to edit a DSDT files... and how to create a image, in case of calamity... later, upload configuration files, for any user Z600... 1 Link to comment Share on other sites More sharing options...
MacPeet Posted May 23, 2016 Share Posted May 23, 2016 @Rockey12 try this: https://www.root86.com/blog/40/entry-46-versteckte-dateien-imessage-facetime/ 1 Link to comment Share on other sites More sharing options...
karolis30 Posted May 23, 2016 Share Posted May 23, 2016 Hello, I'm stuck installing OS X 10.10 or 10.11 on my "new" HP Z400 workstation. I've tired clover with 10.10, - managed to get to grey screen with spinning wheel. Tried chameleon - was stuck at "cannot find kernel". Finally I've managed to get access to 10.9 Mac (mine original is MBP with 10.6, where Chris Dell app does not work) made USB with the Chris app using 10.11 and later using10.10, the problem is the same - Clover does not show USB install drive. Could anyone point to the list of kext's and/or config.plist for clover in order to start installing OS X? thanks in advance, ----------------------------- HP Z400, Xeon W3680, 24GB RAM, NVIDIA Quatro 400, no OS Link to comment Share on other sites More sharing options...
MacPeet Posted May 23, 2016 Share Posted May 23, 2016 Zur Zeit gehen auch generierte Daten. Du brauchst keine vom echten Mac. Beispiel: 1. Serial Number 2. Board Serial Number: Serial + auffüllen auf 17 Zeichen mit irgendwelchen Buchstaben oder Zahlen 3. MLB = Board Serial Number (17 Zeichen) Das geht so garantiert, allerdings kann es sein, dass durch die Änderung bereits ältere Daten in den versteckten Dateien sind. Dann musst Du einmal die Dateien löschen wie in der Anleitung. 1 Link to comment Share on other sites More sharing options...
jaygrid Posted May 23, 2016 Share Posted May 23, 2016 I do not understand german, if there is a chance to solve iMessage or FaceTime, please can you explain us in english?? Thanks 2 Link to comment Share on other sites More sharing options...
chris1111 Posted May 24, 2016 Share Posted May 24, 2016 still no joy the same problem i did the method as required Did you connect with Cable Internet for the first connection??? because if you are using the wifi for first connections thats not working , you need to delete NetworkInteface.plist again and delete all nework Reboot and used the Internet Cable 1 Link to comment Share on other sites More sharing options...
MacPeet Posted May 24, 2016 Share Posted May 24, 2016 all services previously disable (Store, Cloud, ...) 1. and 2. Caches/com.apple.Messages Caches/com.apple.imfoundation.IMRemoteURLConnectionAgentdelete Folder/StartupDrive/Users/Username/Library/Messages delete all Filescom.apple.iChat.xxx...com.apple.imagent.xxx...com.apple.imessage.xxx...com.apple.imservice.xxx...com.apple.facetime.xxx...com.apple.security.xxx... 3. delete NetworkInteface.plist 4. delete nvram (nvram -c) Reboot controlling network Reboot 1 Link to comment Share on other sites More sharing options...
MacPeet Posted May 26, 2016 Share Posted May 26, 2016 strange Then there must be another cause. Perhaps Apple has changed somewhat. However, all my Hackintosh work with data generated and everything works. Link to comment Share on other sites More sharing options...
jaymack Posted May 26, 2016 Share Posted May 26, 2016 I had that problem when trying Messages with my Yahoo account. When I used Google everything worked. Link to comment Share on other sites More sharing options...
gkourk6522 Posted May 26, 2016 Share Posted May 26, 2016 hi do you know if Nvidia gtx 980ti works in 10.11.xx Link to comment Share on other sites More sharing options...
frenk Posted May 26, 2016 Share Posted May 26, 2016 100% working (nvidia driver) Link to comment Share on other sites More sharing options...
jaymack Posted May 27, 2016 Share Posted May 27, 2016 Have you called Apple Care? Link to comment Share on other sites More sharing options...
jaymack Posted May 30, 2016 Share Posted May 30, 2016 I can login to ICloud and Facetime, but not IMessage. Link to comment Share on other sites More sharing options...
fraidias Posted May 30, 2016 Share Posted May 30, 2016 I finally managed to successfully install OSX on my computer capitan 10.11 HP Z400,BIOS VERSION 3.60Bootloader Trebol 2.3k_r3543Nvidia Quadro 2000 with dual-monitor HP ZR2440wThe only problem I see isI detected SMBIOS as IMAC 27 "as I change the identifier without causing errors ??On the other hand .. there is any easy guide to understand about creating dual boot with windows 7 or windows 8 for novice users in hackintosh.I feel my English because I use a translator (I am Spanish)I show you some pictures 3 Link to comment Share on other sites More sharing options...
jaymack Posted May 31, 2016 Share Posted May 31, 2016 The Final result as i said never give up i used the clone method it took me just a few minute to activate iMessage and FaceTime imessage debug tool use on real Mac to get a Text copy of MLB+ROM +SMUUID i did that with real Mac data Seriously ******* it Im done. I AM AT THE POINT WHERE I NEED ACTUAL MLB ROM AND SMUUID FROM A REAL MAC. Link to comment Share on other sites More sharing options...
jaygrid Posted May 31, 2016 Share Posted May 31, 2016 i dont hava a real Mac Pro but i can get macair data, could be useful, Can I run macair system def in a HP Z600 Hackintosh? Link to comment Share on other sites More sharing options...
Recommended Posts