Jump to content

Broadcom Bluetooth 20702A

Xeon3D

By Xeon3D,
in OSx86 10.11 (El Capitan)

 Share
123 posts in this topic

Recommended Posts

RehabMan
RehabMan
Posted
Posted

same here. I don't know why.

In 10.11, my bluetooth shows up (both in USB and in settings, system information), it can search for devices, but when I try to connect, it always failed. In Yosemite, I have to have the firmware uploaded using BrcmPatchRAM.

What is vendor/device-id of the device?

Link to comment
Share on other sites
robi39
robi39
Posted
Posted

What is vendor/device-id of the device?

 

What is vendor/device-id of the device?

As far as I know his is same as mine AzureWave AW-CE123H Device ID: 13316, Vendor: 5075, mine is doing that as well when you can search for devices but can't coonect.

  • Like 1
Link to comment
Share on other sites
RehabMan
RehabMan
Posted
Posted

As far as I know his is same as mine AzureWave AW-CE123H Device ID: 13316, Vendor: 5075, mine is doing that as well when you can search for devices but can't coonect.

I think that is one of the vendor/device ids that are not supported by the firmware provided in 10.11.

Link to comment
Share on other sites
RehabMan
RehabMan
Posted
Posted

Your firmware is still showing the default v4096. Strange that it still works for you.

Note c4096, not v4096.

 

I see the same here using injector with 10.10.5 -- it works but there are issues with USB post-sleep (a 10sec delay).

 

With 10.11, v5744 is displayed.

 

Either way, both work...

Link to comment
Share on other sites
sebinouse
sebinouse
Posted
Posted

hello

 

sure there it is.. only remove the others injector for my hardware

 

attachicon.gifFakeSMC_1394.kext.zip

 

good hack

 

Thanks, so you use FakeSMC.kext/Contents/Info.plist to inject your hardware with the same way as common injectors do  :thumbsup_anim:

I never imagined to do so !

 

Your injection seems to be same as RehabMan for our card, so everything is consistent.

Link to comment
Share on other sites
sebinouse
sebinouse
Posted
Posted

Note c4096, not v4096.

 

...

With 10.11, v5744 is displayed.

 

 On 10.10.5 I have v14 c5575 and on 10.11.DP8 I get randomly v14 c4096 and v14 c5575.

 

With c5575 : everything is OK

with c4096 : Sys Pref OK but no connection !

 

Is there a way to force a firmware on 10.11 ?

post-389035-0-24790500-1441744290_thumb.png

post-389035-0-64774900-1441744298_thumb.png

post-389035-0-22196700-1441744311_thumb.png

Link to comment
Share on other sites
Navaira
Navaira
Posted
Posted

I'm so relieved to see I am not the only one with this problem.


 


I was using PB6 with perfectly working bluetooth, switched it off for the night, powered up in the morning and... no bluetooth. First the device was displayed, but wouldn't connect, then after I deleted the apple.Bluetooth.plist it wouldn't appear anymore. I hoped the GM would solve the problem, but, no. I guess that somehow the driver was cached somewhere and that's why it worked until, well, it stopped. My install on the other partition stopped working too. Checked the mouse, it's fine.


 


Azurewave AW-CE123H, vendor: 0x13D3, product: 0x3404. Updated FakePCIID and other kexts, but I still get this in console output:


 


Sep 10 22:37:31 localhost kernel[0]: BTFirmwareUploader :: Broadcom WiFi/BT combo Bluetooth controller found


Sep 10 22:37:31 localhost kernel[0]: BTFirmwareUploader :: Failed to reset the device


Sep 10 22:37:31 localhost kernel[0]: BTFirmwareUploader :: Failed to initialize the device.


 


Edit: After much editing, updating and replacing, I have arrived at:


 


Sep 11 14:59:11 localhost kernel[0]: BTFirmwareUploader :: Broadcom WiFi/BT combo Bluetooth controller found


Sep 11 14:59:11 localhost kernel[0]: BTFirmwareUploader :: ProductID 0x3404, VendorID 0x13d3


Sep 11 14:59:11 localhost kernel[0]: BTFirmwareUploader :: Failed to initialize the device.


 


Current kexts:


 


bcm4352 3.2.0


BrcmBluetoothInjector 1.7.4 with USBDevice replaced by USBHostDevice


BTFirmwareUploader 2.8.7 


 


plus patch in FakeSMC as per artur-pt's post


 


Bluetooth is listed both in Bluetooth section of System Report (software c4096) and in USB Hub.


 


I'm kinda close to giving up on this (I constantly had problems with bluetooth and Magic Mouse) and buying iogear GBU521W6 – if only I could find out whether it works completely without drivers, injectors, patches, DSDTs etc...


Link to comment
Share on other sites
artur_pt
artur_pt
Posted
Posted

hello

 

don't use BTFirmwareUploader .. only use the injector in el capo..

 

BrcmBluetoothInjector.kext

To be used for OS X newer than Yosemite.

Install only one kext, BrcmBluetoothInjector.kext or BrcmPatchRAM.kext (depending on OS X version), to /S/L/E or Clover/kexts.

 

 

https://bitbucket.org/RehabMan/os-x-brcmpatchram/downloads

 

good hack

Link to comment
Share on other sites
Navaira
Navaira
Posted
Posted

Thanks Artur, removed BTFirmwareUploader. Unfortunately there's no change (other than BTFirmwareUploader no longer displaying in system.log). Bluetooth is detected, appears on the top bar and in Preferences, Bluetooth Explorer sees it, System Report sees it, basically everything is tip top except for the fact my mouse is not detected and won't pair.

 

*sigh*

Link to comment
Share on other sites
s0niqu3
s0niqu3
Posted
Posted

Has anyone gotten Handoff/Hotspot working in el capitan with ProductID 0x3404, VendorID 0x13d3? For me, it shows up, it connects devices, yet I can't get handoff/hotspot to work on it. 

I have a different card (Asus BCM4352/Azurewave CE-123H, vendor: 0x0b05, product: 0x17cf) but same problem.

 

Using BrcmBluetoothInjector and 10.11 handoff patch in clover (3259) everything looks exactly like it did in 10.10.X

 

10.10.5 screenshot: http://i.imgur.com/J3CEs0a.png

10.11 GM screenshot: http://i.imgur.com/8y42t4Y.png

 

Bluetooth mouse (including waking from sleep) works, but handoff and instant hotspot don't work anymore.

Link to comment
Share on other sites
mnfesq
mnfesq
Posted
Posted

I finally got Bluetooth to connect using BrcmPatchRAM.kext but I had to change USBDevice to USBHostDevice for my PID/VID.


I have a different card (Asus BCM4352/Azurewave CE-123H, vendor: 0x0b05, product: 0x17cf) but same problem.

Using BrcmBluetoothInjector and 10.11 handoff patch in clover (3259) everything looks exactly like it did in 10.10.X

10.10.5 screenshot: http://i.imgur.com/J3CEs0a.png
10.11 GM screenshot: http://i.imgur.com/8y42t4Y.png

Bluetooth mouse (including waking from sleep) works, but handoff and instant hotspot don't work anymore.

 

We have the same card.  Try what worked for me.

			<dict>
				<key>Comment</key>
				<string>5 GHz/BT Handoff Patch</string>
				<key>Find</key>
				<data>
				QYP8/3QsSA==
				</data>
				<key>Name</key>
				<string>AirPortBrcm4360</string>
				<key>Replace</key>
				<data>
				ZscGVVPrKw==
				</data>
			</dict>
Link to comment
Share on other sites
s0niqu3
s0niqu3
Posted
Posted

I finally got Bluetooth to connect using BrcmPatchRAM.kext but I had to change USBDevice to USBHostDevice for my PID/VID.

 

 

We have the same card.  Try what worked for me.

			<dict>
				<key>Comment</key>
				<string>5 GHz/BT Handoff Patch</string>
				<key>Find</key>
				<data>
				QYP8/3QsSA==
				</data>
				<key>Name</key>
				<string>AirPortBrcm4360</string>
				<key>Replace</key>
				<data>
				ZscGVVPrKw==
				</data>
			</dict>

 

Thanks for the reply, but I'm already using this patch to enable/fix 5ghz; it has no effect on handoff/hotspot for me.

Link to comment
Share on other sites
mnfesq
mnfesq
Posted
Posted

Thanks for the reply, but I'm already using this patch to enable/fix 5ghz; it has no effect on handoff/hotspot for me.

 

Are you using this one as well?

			<dict>
				<key>Comment</key>
				<string>Handoff Fix</string>
				<key>Find</key>
				<data>
				SIX/dEdIiwc=
				</data>
				<key>Name</key>
				<string>IOBluetoothFamily</string>
				<key>Replace</key>
				<data>
				Qb4PAAAA60Q=
				</data>
			</dict>
Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...