zeroxw Posted October 11, 2015 Share Posted October 11, 2015 have you disabled SIP ?? No, I haven't disabled it. I think that's why I can't install kext of Mirone Link to comment Share on other sites More sharing options...
zeroxw Posted October 11, 2015 Share Posted October 11, 2015 Thank Toleda & InsanelyDeepak, script work fine for ACL892. I have disabled SIP then run the script and problem solved. 1 Link to comment Share on other sites More sharing options...
denghongcai Posted October 11, 2015 Share Posted October 11, 2015 Laptop Acer 4750, audio codec alc269vb i use vusun123's patched applehda to get internal speaker, internal mic and extern mic work perfectly. I can't get headphone work, though it detected headphone, no sound unfortunately... HDMI audio is also not work. I follow Mirone's guide to manually patch AppleHDA from a original state, but still failed. Anyone can help me? AppleHDA.kext.zip codec_dump.txt configdata+ioreg+dsdt.zip Link to comment Share on other sites More sharing options...
insanelyDeepak Posted October 11, 2015 Share Posted October 11, 2015 No, I haven't disabled it. I think that's why I can't install kext of Mirone yes this is main reason behind Link to comment Share on other sites More sharing options...
vusun123 Posted October 12, 2015 Share Posted October 12, 2015 Laptop Acer 4750, audio codec alc269vb i use vusun123's patched applehda to get internal speaker, internal mic and extern mic work perfectly. I can't get headphone work, though it detected headphone, no sound unfortunately... HDMI audio is also not work. I follow Mirone's guide to manually patch AppleHDA from a original state, but still failed. Anyone can help me? Did you patch your DSDT properly yet ? You must have patched your HPET, IRQ and RTC in order for it to work properly Link to comment Share on other sites More sharing options...
denghongcai Posted October 12, 2015 Share Posted October 12, 2015 I upload my dsdt.aml as attachment... I patched https://github.com/RehabMan/Laptop-DSDT-Patch HPET, IRQ and RTC all done. Strange thing is headphone can be detected by OSX, but no sound output...only internal speaker work. Link to comment Share on other sites More sharing options...
vusun123 Posted October 12, 2015 Share Posted October 12, 2015 I upload my dsdt.aml as attachment... I patched https://github.com/RehabMan/Laptop-DSDT-Patch HPET, IRQ and RTC all done. Strange thing is headphone can be detected by OSX, but no sound output...only internal speaker work. Did it switch to Headphone when you plugged in ? If so and also no sound, then the headphone node and path map must have been wrong Link to comment Share on other sites More sharing options...
denghongcai Posted October 12, 2015 Share Posted October 12, 2015 it switch to Headphone. I have changed the pathmap but not work. My #229 reply attachment contain the codec_dump and more information. Link to comment Share on other sites More sharing options...
vusun123 Posted October 12, 2015 Share Posted October 12, 2015 it switch to Headphone. I have changed the pathmap but not work. My #229 reply attachment contain the codec_dump and more information. Your verbs data: 01471c10 01471d00 01471e13 01471f90 01470c02 01871c30 01871d90 01871e81 01871f00 01b71c20 01b71d00 01b71ea0 01b71f90 02171c40 02171d10 02171e21 02171f00 Your headphone's pathmap: 33 > 12 > 2 Link to comment Share on other sites More sharing options...
denghongcai Posted October 12, 2015 Share Posted October 12, 2015 Unfortunately I'm using the pathmap 33 > 12 > 2 ... And the attachment also contain the AppleHDA.kext I am using.... I tried your verbs data, not work it's weird.... Link to comment Share on other sites More sharing options...
vusun123 Posted October 12, 2015 Share Posted October 12, 2015 Unfortunately I'm using the pathmap 33 > 12 > 2 ... And the attachment also contain the AppleHDA.kext I am using.... I tried your verbs data, not work it's weird.... Do you have Windows or Linux ? Check if your headphone port is usable Link to comment Share on other sites More sharing options...
denghongcai Posted October 12, 2015 Share Posted October 12, 2015 ehhhh, of course... Under Ubuntu 14.04 and Windows 10, headphone port is working perfectly... Link to comment Share on other sites More sharing options...
TheRacerMaster Posted October 12, 2015 Share Posted October 12, 2015 You might need CodecCommander. Link to comment Share on other sites More sharing options...
denghongcai Posted October 13, 2015 Share Posted October 13, 2015 I will try CodecCommander and post the result later, thanks Link to comment Share on other sites More sharing options...
insanelyDeepak Posted October 13, 2015 Share Posted October 13, 2015 Unfortunately I'm using the pathmap 33 > 12 > 2 ... And the attachment also contain the AppleHDA.kext I am using.... I tried your verbs data, not work it's weird.... change jacksense to 2 or 3 , if Headphone started working you will loose speaker or vice-versa . after results we can say headphone is workable and we can make it to work by changing pathmaps .. Link to comment Share on other sites More sharing options...
jvdp Posted October 15, 2015 Share Posted October 15, 2015 Hi, i have a GA-Z77-D3H mobo. I try to get the VT2021 chip working but for now I only get it to work with VoodooHDA. I tried using HDAEnabler7 and the kext from Mirone's git repo but that is without luck. Can someone point me in the right direction what I need to do to get this working? cheers! Link to comment Share on other sites More sharing options...
insanelyDeepak Posted October 16, 2015 Share Posted October 16, 2015 Hi, i have a GA-Z77-D3H mobo. I try to get the VT2021 chip working but for now I only get it to work with VoodooHDA. I tried using HDAEnabler7 and the kext from Mirone's git repo but that is without luck. Can someone point me in the right direction what I need to do to get this working? cheers! try Mirone Kext and report with Requested file to so can take a look Link to comment Share on other sites More sharing options...
TheRacerMaster Posted October 16, 2015 Share Posted October 16, 2015 Hi, i have a GA-Z77-D3H mobo. I try to get the VT2021 chip working but for now I only get it to work with VoodooHDA. I tried using HDAEnabler7 and the kext from Mirone's git repo but that is without luck. Can someone point me in the right direction what I need to do to get this working? cheers! Try with layout ID 5. Link to comment Share on other sites More sharing options...
jvdp Posted October 16, 2015 Share Posted October 16, 2015 Cool guys, thanks! ID5 and the kext of Mirone did the trick. Thought i had that combination tried already. Thanks! Link to comment Share on other sites More sharing options...
bankkopf Posted October 17, 2015 Share Posted October 17, 2015 Thanks ID 5 worked for VT2021. Only tried 7, 9 and 12 and neither of them did work. Thought 5 was irrelevant because of mapping in the readme. Link to comment Share on other sites More sharing options...
jvdp Posted October 23, 2015 Share Posted October 23, 2015 Is there also a way to get the frontpanel connectors working? For instance when I plug in my headphones on the frontpanel doesnt work. Link to comment Share on other sites More sharing options...
TheRacerMaster Posted October 23, 2015 Share Posted October 23, 2015 Post a codec dump from Linux, maybe Mirone or Deepak could take a look at it. Link to comment Share on other sites More sharing options...
jvdp Posted October 23, 2015 Share Posted October 23, 2015 Ok, here is the output. I hope someone can help me out with this! Codec: VIA VT2020 Address: 2 AFG Function Id: 0x1 (unsol 0) Vendor Id: 0x11060441 Subsystem Id: 0x1458a014 Revision Id: 0x100100 No Modem Function Group found Default PCM: rates [0x0]: bits [0x0]: formats [0x0]: Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 GPIO: io=1, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x08 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Front Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="VT2020 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0 Amp-Out vals: [0x1c 0x1c] Converter: stream=5, channel=0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Node 0x09 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Surround Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0 Amp-Out vals: [0x1c 0x1c] Converter: stream=5, channel=0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Node 0x0a [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Center Playback Volume", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Control: name="LFE Playback Volume", index=0, device=0 ControlAmp: chs=2, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0 Amp-Out vals: [0x1c 0x1c] Converter: stream=5, channel=0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Node 0x0b [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="VT2020 Alt Analog", type="Audio", device=2 Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=5, channel=0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Node 0x0c [Audio Output] wcaps 0x41d: Stereo Amp-Out Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=0, channel=0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Node 0x0d [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0e [Audio Output] wcaps 0x611: Stereo Digital Control: name="IEC958 Playback Con Mask", index=0, device=0 Control: name="IEC958 Playback Pro Mask", index=0, device=0 Control: name="IEC958 Playback Default", index=0, device=0 Control: name="IEC958 Playback Switch", index=0, device=0 Control: name="IEC958 Default PCM Playback Switch", index=0, device=0 Device: name="VT2020 Digital", type="SPDIF", device=1 Converter: stream=5, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Node 0x0f [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=5, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Node 0x10 [Audio Input] wcaps 0x10051b: Stereo Amp-In Control: name="Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Capture Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Device: name="VT2020 Analog", type="Audio", device=0 Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x13 0x13] Converter: stream=1, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x1e Node 0x11 [Audio Input] wcaps 0x10051b: Stereo Amp-In Control: name="Capture Volume", index=1, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Capture Switch", index=1, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Device: name="VT2020 Alt Analog", type="Audio", device=2 Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x80 0x80] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x1f Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x13 [Audio Input] wcaps 0x100711: Stereo Digital Converter: stream=0, channel=0 SDI-Select: 0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x1f0]: 32000 44100 48000 88200 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x2f Node 0x14 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x15 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x16 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x18 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 2 0x08 0x21 Node 0x19 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 2 0x09 0x21 Node 0x1a [Audio Mixer] wcaps 0x20050b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 2 0x0b 0x21 Node 0x1b [Audio Mixer] wcaps 0x20050b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 2 0x34 0x21 Node 0x1c [Audio Mixer] wcaps 0x20050b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 2 0x35 0x21 Node 0x1d [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x1e [Audio Selector] wcaps 0x300501: Stereo Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 6 0x2c 0x2b 0x2a 0x29* 0x28 0x21 Node 0x1f [Audio Selector] wcaps 0x300501: Stereo Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 6 0x2c 0x2b 0x2a 0x29* 0x28 0x21 Node 0x20 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x21 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In Control: name="Front Mic Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=3, ofs=0 Control: name="Front Mic Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=3, ofs=0 Control: name="Rear Mic Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=1, ofs=0 Control: name="Rear Mic Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=1, ofs=0 Control: name="Line Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Control: name="Line Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 5 0x2c 0x2b 0x2a 0x29 0x28 In-driver Connection: 6 0x2c 0x2b 0x2a 0x29 0x28 0x08 Node 0x22 [Beep Generator Widget] wcaps 0x70040c: Mono Amp-Out Control: name="Beep Playback Volume", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Control: name="Beep Playback Switch", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x0a, nsteps=0x12, stepsize=0x05, mute=1 Amp-Out vals: [0x0a] Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Node 0x23 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x24 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Front Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0001001c: OUT HP EAPD Detect EAPD 0x2: EAPD Pin Default 0x01014010: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=01, enabled=1 Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x18 Node 0x25 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Surround Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0000001c: OUT HP Detect Pin Default 0x01011012: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0x1, Sequence = 0x2 Pin-ctls: 0x40: OUT Unsolicited: tag=02, enabled=1 Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x19 Node 0x26 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Center Playback Switch", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Control: name="LFE Playback Switch", index=0, device=0 ControlAmp: chs=2, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00000014: OUT Detect Pin Default 0x01016011: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Orange DefAssociation = 0x1, Sequence = 0x1 Pin-ctls: 0x40: OUT Unsolicited: tag=03, enabled=1 Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x0a Node 0x27 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00000014: OUT Detect Pin Default 0x410120f0: [N/A] Line Out at Ext Rear Conn = 1/8, Color = Grey DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x1a Node 0x28 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000233c: IN OUT HP Detect Vref caps: HIZ 50 100 Pin Default 0x0221401f: [Jack] HP Out at Ext Front Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0xf Pin-ctls: 0xc0: OUT HP VREF_HIZ Unsolicited: tag=04, enabled=1 Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x1b Node 0x29 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Front Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000233c: IN OUT HP Detect Vref caps: HIZ 50 100 Pin Default 0x02a19037: [Jack] Mic at Ext Front Conn = 1/8, Color = Pink DefAssociation = 0x3, Sequence = 0x7 Pin-ctls: 0x21: IN VREF_50 Unsolicited: tag=05, enabled=1 Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x1c Node 0x2a [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00002334: IN OUT Detect Vref caps: HIZ 50 100 Pin Default 0x0181303e: [Jack] Line In at Ext Rear Conn = 1/8, Color = Blue DefAssociation = 0x3, Sequence = 0xe Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=07, enabled=1 Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 2 0x09* 0x0c Node 0x2b [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Rear Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00002334: IN OUT Detect Vref caps: HIZ 50 100 Pin Default 0x01a19036: [Jack] Mic at Ext Rear Conn = 1/8, Color = Pink DefAssociation = 0x3, Sequence = 0x6 Pin-ctls: 0x21: IN VREF_50 Unsolicited: tag=06, enabled=1 Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 2 0x0a* 0x0c Node 0x2c [Pin Complex] wcaps 0x400401: Stereo Pincap 0x00000020: IN Pin Default 0x503701f0: [N/A] CD at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Node 0x2d [Pin Complex] wcaps 0x400701: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x074511f0: [Jack] SPDIF Out at Ext Rear Panel Conn = Optical, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x0e Node 0x2e [Pin Complex] wcaps 0x400701: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x074511f0: [Jack] SPDIF Out at Ext Rear Panel Conn = Optical, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x0f Node 0x2f [Pin Complex] wcaps 0x400601: Stereo Digital Pincap 0x00000030: IN OUT Pin Default 0x585601f0: [N/A] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Node 0x30 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x31 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x32 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x33 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x34 [Audio Selector] wcaps 0x300501: Stereo Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 3 0x08 0x0b* 0x0c Node 0x35 [Audio Selector] wcaps 0x300501: Stereo Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 3 0x08* 0x0b 0x0c Link to comment Share on other sites More sharing options...
insanelyDeepak Posted October 24, 2015 Share Posted October 24, 2015 Ok, here is the output. I hope someone can help me out with this! Codec: VIA VT2020 Address: 2 AFG Function Id: 0x1 (unsol 0) Vendor Id: 0x11060441 Subsystem Id: 0x1458a014 Revision Id: 0x100100 No Modem Function Group found Default PCM: rates [0x0]: bits [0x0]: formats [0x0]: Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 GPIO: io=1, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x08 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Front Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="VT2020 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0 Amp-Out vals: [0x1c 0x1c] Converter: stream=5, channel=0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Node 0x09 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Surround Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0 Amp-Out vals: [0x1c 0x1c] Converter: stream=5, channel=0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Node 0x0a [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Center Playback Volume", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Control: name="LFE Playback Volume", index=0, device=0 ControlAmp: chs=2, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0 Amp-Out vals: [0x1c 0x1c] Converter: stream=5, channel=0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Node 0x0b [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="VT2020 Alt Analog", type="Audio", device=2 Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=5, channel=0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Node 0x0c [Audio Output] wcaps 0x41d: Stereo Amp-Out Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=0, channel=0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Node 0x0d [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0e [Audio Output] wcaps 0x611: Stereo Digital Control: name="IEC958 Playback Con Mask", index=0, device=0 Control: name="IEC958 Playback Pro Mask", index=0, device=0 Control: name="IEC958 Playback Default", index=0, device=0 Control: name="IEC958 Playback Switch", index=0, device=0 Control: name="IEC958 Default PCM Playback Switch", index=0, device=0 Device: name="VT2020 Digital", type="SPDIF", device=1 Converter: stream=5, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Node 0x0f [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=5, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Node 0x10 [Audio Input] wcaps 0x10051b: Stereo Amp-In Control: name="Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Capture Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Device: name="VT2020 Analog", type="Audio", device=0 Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x13 0x13] Converter: stream=1, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x1e Node 0x11 [Audio Input] wcaps 0x10051b: Stereo Amp-In Control: name="Capture Volume", index=1, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Capture Switch", index=1, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Device: name="VT2020 Alt Analog", type="Audio", device=2 Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x80 0x80] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x1f Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x13 [Audio Input] wcaps 0x100711: Stereo Digital Converter: stream=0, channel=0 SDI-Select: 0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x1f0]: 32000 44100 48000 88200 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x2f Node 0x14 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x15 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x16 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x18 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 2 0x08 0x21 Node 0x19 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 2 0x09 0x21 Node 0x1a [Audio Mixer] wcaps 0x20050b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 2 0x0b 0x21 Node 0x1b [Audio Mixer] wcaps 0x20050b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 2 0x34 0x21 Node 0x1c [Audio Mixer] wcaps 0x20050b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 2 0x35 0x21 Node 0x1d [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x1e [Audio Selector] wcaps 0x300501: Stereo Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 6 0x2c 0x2b 0x2a 0x29* 0x28 0x21 Node 0x1f [Audio Selector] wcaps 0x300501: Stereo Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 6 0x2c 0x2b 0x2a 0x29* 0x28 0x21 Node 0x20 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x21 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In Control: name="Front Mic Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=3, ofs=0 Control: name="Front Mic Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=3, ofs=0 Control: name="Rear Mic Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=1, ofs=0 Control: name="Rear Mic Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=1, ofs=0 Control: name="Line Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Control: name="Line Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 5 0x2c 0x2b 0x2a 0x29 0x28 In-driver Connection: 6 0x2c 0x2b 0x2a 0x29 0x28 0x08 Node 0x22 [Beep Generator Widget] wcaps 0x70040c: Mono Amp-Out Control: name="Beep Playback Volume", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Control: name="Beep Playback Switch", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x0a, nsteps=0x12, stepsize=0x05, mute=1 Amp-Out vals: [0x0a] Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Node 0x23 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x24 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Front Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0001001c: OUT HP EAPD Detect EAPD 0x2: EAPD Pin Default 0x01014010: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=01, enabled=1 Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x18 Node 0x25 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Surround Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0000001c: OUT HP Detect Pin Default 0x01011012: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0x1, Sequence = 0x2 Pin-ctls: 0x40: OUT Unsolicited: tag=02, enabled=1 Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x19 Node 0x26 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Center Playback Switch", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Control: name="LFE Playback Switch", index=0, device=0 ControlAmp: chs=2, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00000014: OUT Detect Pin Default 0x01016011: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Orange DefAssociation = 0x1, Sequence = 0x1 Pin-ctls: 0x40: OUT Unsolicited: tag=03, enabled=1 Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x0a Node 0x27 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00000014: OUT Detect Pin Default 0x410120f0: [N/A] Line Out at Ext Rear Conn = 1/8, Color = Grey DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x1a Node 0x28 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000233c: IN OUT HP Detect Vref caps: HIZ 50 100 Pin Default 0x0221401f: [Jack] HP Out at Ext Front Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0xf Pin-ctls: 0xc0: OUT HP VREF_HIZ Unsolicited: tag=04, enabled=1 Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x1b Node 0x29 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Front Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000233c: IN OUT HP Detect Vref caps: HIZ 50 100 Pin Default 0x02a19037: [Jack] Mic at Ext Front Conn = 1/8, Color = Pink DefAssociation = 0x3, Sequence = 0x7 Pin-ctls: 0x21: IN VREF_50 Unsolicited: tag=05, enabled=1 Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x1c Node 0x2a [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00002334: IN OUT Detect Vref caps: HIZ 50 100 Pin Default 0x0181303e: [Jack] Line In at Ext Rear Conn = 1/8, Color = Blue DefAssociation = 0x3, Sequence = 0xe Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=07, enabled=1 Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 2 0x09* 0x0c Node 0x2b [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Rear Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00002334: IN OUT Detect Vref caps: HIZ 50 100 Pin Default 0x01a19036: [Jack] Mic at Ext Rear Conn = 1/8, Color = Pink DefAssociation = 0x3, Sequence = 0x6 Pin-ctls: 0x21: IN VREF_50 Unsolicited: tag=06, enabled=1 Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 2 0x0a* 0x0c Node 0x2c [Pin Complex] wcaps 0x400401: Stereo Pincap 0x00000020: IN Pin Default 0x503701f0: [N/A] CD at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Node 0x2d [Pin Complex] wcaps 0x400701: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x074511f0: [Jack] SPDIF Out at Ext Rear Panel Conn = Optical, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x0e Node 0x2e [Pin Complex] wcaps 0x400701: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x074511f0: [Jack] SPDIF Out at Ext Rear Panel Conn = Optical, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x0f Node 0x2f [Pin Complex] wcaps 0x400601: Stereo Digital Pincap 0x00000030: IN OUT Pin Default 0x585601f0: [N/A] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Node 0x30 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x31 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x32 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x33 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x34 [Audio Selector] wcaps 0x300501: Stereo Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 3 0x08 0x0b* 0x0c Node 0x35 [Audio Selector] wcaps 0x300501: Stereo Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 3 0x08* 0x0b 0x0c While posting Codec_dump , make it zip file .. Link to comment Share on other sites More sharing options...
cecekpawon Posted October 24, 2015 Share Posted October 24, 2015 @iDeepak all input from @jvdp codec seem have no connection to mixer, is that normal? Link to comment Share on other sites More sharing options...
Recommended Posts