andycorleone Posted January 23, 2016 Share Posted January 23, 2016 I own a TitanX, Installed on El Capitan 10.11.3 with Latest Nvidia Drivers, Everything seen fine but Photoshop have some issues when resizing images so trying to figure out thing I also found LuxMark v3,1 show me an error on the OpenCL GPU test: Should I worry about this? Link to comment Share on other sites More sharing options...
Badeendje Posted January 23, 2016 Share Posted January 23, 2016 I've restored to .2 again, after 3 days of intensive trying I couldn't get these drivers to work with the iMac17,1 smbios, changing my smbios to for example 15,1 or MacPro3,1 did work. So it seems if you're rocking skylake already as I do nvidia + iMac17,1 smbios is a no go for some weird reason. The symptom is black screen just like before you change 65CE76090165799A from Config2 to none, except this has been changed and I have rebuild the prelinked kernel and caches. So if you managed nvidia +iMac17,1 smbios I'd hear it gladly and else too... it's just puzzling and to the best of my knowledge this can't be done at this very moment. In retrospect; .2 works within 5 minutes of installing the webdrivers and have been stable for weeks, .3 just won't work for me whether it's the smbios or this gtx960 I'm not sure (have no other card to try). Here's all info proving it works with .2 perfectly, it's an Asus Strix 960; NVIDIA GeForce GTX 960: Chipsetmodel: NVIDIA GeForce GTX 960 Type: GPU Bus: PCIe Sleuf: PCI Slot 0 Breedte PCIe-baan: x16 VRAM (totaal): 4095 MB Fabrikant: NVIDIA (0x10de) Apparaatcode: 0x1401 Revisiecode: 0x00a1 ROM-revisie: VBIOS 84.06.26.00.08 Beeldschermen: LED Cinema Display: Beeldschermtype: LCD Resolutie: 1920 x 1200 Pixeldiepte: 32-bits kleur (ARGB8888) Hoofdbeeldscherm: Ja Synchrone weergave: Uit Online: Ja Rotatie: Ondersteund Verbindingstype: DisplayPort Link to comment Share on other sites More sharing options...
andycorleone Posted January 25, 2016 Share Posted January 25, 2016 After you changed to "none" you must resintall the kext with easykext otherwise changes won't take effect I've restored to .2 again, after 3 days of intensive trying I couldn't get these drivers to work with the iMac17,1 smbios, changing my smbios to for example 15,1 or MacPro3,1 did work. So it seems if you're rocking skylake already as I do nvidia + iMac17,1 smbios is a no go for some weird reason. The symptom is black screen just like before you change 65CE76090165799A from Config2 to none, except this has been changed and I have rebuild the prelinked kernel and caches. So if you managed nvidia +iMac17,1 smbios I'd hear it gladly and else too... it's just puzzling and to the best of my knowledge this can't be done at this very moment. In retrospect; .2 works within 5 minutes of installing the webdrivers and have been stable for weeks, .3 just won't work for me whether it's the smbios or this gtx960 I'm not sure (have no other card to try). Here's all info proving it works with .2 perfectly, it's an Asus Strix 960 Link to comment Share on other sites More sharing options...
Badeendje Posted January 25, 2016 Share Posted January 25, 2016 After you changed to "none" you must resintall the kext with easykext otherwise changes won't take effect Which kext do you exactly mean? Tried that to no avail really. Link to comment Share on other sites More sharing options...
andycorleone Posted January 26, 2016 Share Posted January 26, 2016 Which kext do you exactly mean? Tried that to no avail really. AppleGraphicsControl.kext Right, is not the one that you change the parameter? Link to comment Share on other sites More sharing options...
Badeendje Posted January 26, 2016 Share Posted January 26, 2016 AppleGraphicsControl.kext Right, is not the one that you change the parameter? I did, but that won't work. What I did for 2 is copy the file to desktop, edit it, overwrite it and repair permissions. That works. However replacing the whole kext won't, never did. Link to comment Share on other sites More sharing options...
Fljagd Posted January 26, 2016 Share Posted January 26, 2016 So on 10.11.3 + official drivers it seems Final Cut Pro X is now fixed. Incase anyone else is wondering about this. It's ok for me Link to comment Share on other sites More sharing options...
cwestpha Posted January 27, 2016 Share Posted January 27, 2016 I did, but that won't work. What I did for 2 is copy the file to desktop, edit it, overwrite it and repair permissions. That works. However replacing the whole kext won't, never did. Sometimes it acts up when doing a copy replace. Copy to desktop the vanila 10.11.3 kext, modify it, delete the original kext from s/l/e, then copy the .kext back with your fave kext utility. I have had times in the past where just overwriting using a kext utility doesn't work. Link to comment Share on other sites More sharing options...
rhcp011235 Posted January 27, 2016 Share Posted January 27, 2016 Has anyone upgraded to 10.11.4 and used the current Nvidia 10.11.4 drivers on their hack and confirm if final cut Pro X is working? And Any better scores on bench mark? http://rhcp011235.rocks/0D0c0S474701 This is my GPU bench Link to comment Share on other sites More sharing options...
JimiRobaer Posted January 27, 2016 Share Posted January 27, 2016 I did, but that won't work. What I did for 2 is copy the file to desktop, edit it, overwrite it and repair permissions. That works. However replacing the whole kext won't, never did. I'm experiencing the same problems on a fresh 10.11.3 install running on a Skylake-based system with iMac17,1 as System Definition. Did the same steps as you, copy, overwrite but no avail. I'm using a GTX 970 and connecting my U2515H via Displayport, but shouldn't give an error. It's quite strange that nobody is experiencing problems like these. Link to comment Share on other sites More sharing options...
andycorleone Posted January 28, 2016 Share Posted January 28, 2016 It's ok for me What happened before what was the problem with FCPX ? Link to comment Share on other sites More sharing options...
Fljagd Posted January 28, 2016 Share Posted January 28, 2016 What happened before what was the problem with FCPX ? it was no problem to confirm the writing of rhcp011235, and illustrate Link to comment Share on other sites More sharing options...
Badeendje Posted January 28, 2016 Share Posted January 28, 2016 I'm experiencing the same problems on a fresh 10.11.3 install running on a Skylake-based system with iMac17,1 as System Definition. Did the same steps as you, copy, overwrite but no avail. I'm using a GTX 970 and connecting my U2515H via Displayport, but shouldn't give an error. It's quite strange that nobody is experiencing problems like these. For me it's a gtx960 with also a screen on DP, i7-6700k. I'll just wait for them to release a driver update or osx 10.11.4 at this point. Nothing seems to help or solve it. Sometimes it acts up when doing a copy replace. Copy to desktop the vanila 10.11.3 kext, modify it, delete the original kext from s/l/e, then copy the .kext back with your fave kext utility. I have had times in the past where just overwriting using a kext utility doesn't work. Unfortunately no... Link to comment Share on other sites More sharing options...
JimiRobaer Posted January 28, 2016 Share Posted January 28, 2016 For me it's a gtx960 with also a screen on DP, i7-6700k. I'll just wait for them to release a driver update or osx 10.11.4 at this point. Nothing seems to help or solve it. Unfortunately no... I've found a temporary fix. Unplugging the DP connector and plugging it back in seems to fix it on cold boot. Sleep on my system works, and also wakes my monitor. Not ideal but at least it works for now. Link to comment Share on other sites More sharing options...
DMCrimson Posted January 29, 2016 Share Posted January 29, 2016 346.03.06b01 available via NVIDIA® WebDriver Updater 1 Link to comment Share on other sites More sharing options...
mschilling Posted January 29, 2016 Share Posted January 29, 2016 I tried the 346.03.05 on my real iMac 14,2 and 10.11.3 and it made my Illustrator CC2015 (19.2.1) crash repeatedly. Link to comment Share on other sites More sharing options...
Klyonh2010 Posted January 29, 2016 Share Posted January 29, 2016 Getting a Mac Pro 3.1 and separate EVGA GTX570 HD. Should the new updated driver just released work as long as I match the build as well? Going to be running newly installed El Capitan and use for single monitor 4K GoPro video editing. Plan To use GoPro Studio and just bought a 2008 3.1 and then separate GTX570 for a song, 350 total for both. Or should I use some previous driver to get it up and running? Thanks for info. Link to comment Share on other sites More sharing options...
rhcp011235 Posted January 29, 2016 Share Posted January 29, 2016 346.03.06b01 available via NVIDIA® WebDriver Updater Im honestly afraid to upgrade past 10.11.3 and current NVIDIA web drivers because FCPX and everything seems to be working. I don't understand how they can fix it? than break it again? very confusing Link to comment Share on other sites More sharing options...
JimiRobaer Posted January 30, 2016 Share Posted January 30, 2016 For me it's a gtx960 with also a screen on DP, i7-6700k. I'll just wait for them to release a driver update or osx 10.11.4 at this point. Nothing seems to help or solve it. Unfortunately no... Hey, quick update. I found the culprit here on my config. My monitor was set to use Displayport 1.2. Read somewhere that it might cause issues, so I turned the screen back to 1.1a and it worked like a charm. Now I don't have to give my PC a big hug everytime I want to use OS X. 1 Link to comment Share on other sites More sharing options...
autantpourmoi Posted February 1, 2016 Share Posted February 1, 2016 Hi , since 10.11.2 i'm experiencing issue with photoshop cc 2015 ( up to date ) ...I have to deactivate open CL under photoshop to avoid artefact on the picture when i'm working with almost all tools ..I already report that to Adobe and they told me that it was a problem with nvidia web drivers ...I also sometimes loose completly my photo which turn in a black screen and i need to clik somewhere on the screen to get it back , and the screen is blinking to , all that under photoshop only ..I didn't try FCPX yet...I have a X99gigabyte ud4 , gtx970 i7 5830K smsbios 14,2 and running know 1011.3 with the same problem...Do you know how i can report to nvidia as i couldn't find the right forum on their site best regards Link to comment Share on other sites More sharing options...
Fljagd Posted February 1, 2016 Share Posted February 1, 2016 Hi , since 10.11.2 i'm experiencing issue with photoshop cc 2015 ( up to date ) ...I have to deactivate open CL under photoshop to avoid artefact on the picture when i'm working with almost all tools ..I already report that to Adobe and they told me that it was a problem with nvidia web drivers ...I also sometimes loose completly my photo which turn in a black screen and i need to clik somewhere on the screen to get it back , and the screen is blinking to , all that under photoshop only ..I didn't try FCPX yet...I have a X99gigabyte ud4 , gtx970 i7 5830K smsbios 14,2 and running know 1011.3 with the same problem...Do you know how i can report to nvidia as i couldn't find the right forum on their site best regards why do you use a smbios 14.2? Link to comment Share on other sites More sharing options...
autantpourmoi Posted February 1, 2016 Share Posted February 1, 2016 because i tried other one and couldn't pass a black screen at the start ...I'm a newb talking hackintosch .that's my main computer with the one i do retouch professionnaly and i use what is working . I'm quite sure it's not the best but afraid of spending time make it work with another smbios. if you have a guide to give me i'll try it i just tried to change smsbios to Macpro 6,1 using clover configurator modifying my config.plist and saving it .Putting it back in EFI and replacing the old one ..After rebooting it still show and imac when i go to about my computer ...!!! seems that no change have been made...i know i'm getting out of subject of this thread sorry Link to comment Share on other sites More sharing options...
Fljagd Posted February 1, 2016 Share Posted February 1, 2016 because i tried other one and couldn't pass a black screen at the start ...I'm a newb talking hackintosch .that's my main computer with the one i do retouch professionnaly and i use what is working . I'm quite sure it's not the best but afraid of spending time make it work with another smbios. if you have a guide to give me i'll try it i just tried to change smsbios to Macpro 6,1 using clover configurator modifying my config.plist and saving it .Putting it back in EFI and replacing the old one ..After rebooting it still show and imac when i go to about my computer ...!!! seems that no change have been made...i know i'm getting out of subject of this thread sorry send your config.plist I look Link to comment Share on other sites More sharing options...
autantpourmoi Posted February 1, 2016 Share Posted February 1, 2016 how? when i try to put it as an attach file it says that i'm not permitted to upload this kind of file..!!! Link to comment Share on other sites More sharing options...
Fljagd Posted February 1, 2016 Share Posted February 1, 2016 how? when i try to put it as an attach file it says that i'm not permitted to upload this kind of file..!!! compress .zip Link to comment Share on other sites More sharing options...
Recommended Posts