Micky1979 Posted October 12, 2015 Share Posted October 12, 2015 still didn't help not sure if i repaired the permissions properly... don't know if Disk Utility dose that in 10.11 or some other tool use that to repair the permissions:http://www.insanelymac.com/forum/files/file/432-insanelyrepairpermission/ but at least be sure to disable the FileSystem Protection in SIP (CsrActiveConfig = 3 for Enoch or CsrActiveConfig = 0x3 for Clover... only work after a reboot) Is SIP disabled ? Run this and report : csrutil status same thought 1 Link to comment Share on other sites More sharing options...
david_osx Posted October 12, 2015 Share Posted October 12, 2015 Is SIP disabled ? Run this and report : csrutil status hehe what do u think 1 Link to comment Share on other sites More sharing options...
Micky1979 Posted October 12, 2015 Share Posted October 12, 2015 enabled? 1 Link to comment Share on other sites More sharing options...
polyzargone Posted October 12, 2015 Share Posted October 12, 2015 I'd say enabled too 1 Link to comment Share on other sites More sharing options...
david_osx Posted October 12, 2015 Share Posted October 12, 2015 enabled? no i had it disabled since i always doing new changing to the system etc but will enable the protection now thanks guys 1 Link to comment Share on other sites More sharing options...
Micky1979 Posted October 12, 2015 Share Posted October 12, 2015 Looking at your pict posted the problem is still the incorrect OS Build version. Was correct the 15B30a? eg. the "a" was lower case? haha, look here: #155 Link to comment Share on other sites More sharing options...
david_osx Posted October 12, 2015 Share Posted October 12, 2015 yes it was lower case a Link to comment Share on other sites More sharing options...
polyzargone Posted October 12, 2015 Share Posted October 12, 2015 no i had it disabled since i always doing new changing to the system etc but will enable the protection now thanks guys Why would you want to do that ? Of course not ! Enabling the SIP will likely make things worst than they already are Agree with Micky's link… The simple way is to set 15B and that's it. Hum… just to be sure… Could you post your NVDAStartupWeb.kext here ? 1 Link to comment Share on other sites More sharing options...
david_osx Posted October 12, 2015 Share Posted October 12, 2015 Why would you want to do that ? Of course not ! Enabling the SIP will likely make things worst than they already are Agree with Micky's link… The simple way is to set 15B and that's it. Hum… just to be sure… Could you post your NVDAStartupWeb.kext here ? sure i did change it like mike said but take a look anyway e.g or did he mean i should remove 15B30a and change it to 15B ? NVDAStartupWeb.kext.zip Link to comment Share on other sites More sharing options...
fantomas Posted October 12, 2015 Author Share Posted October 12, 2015 you did not listen NVDARequiredOS 15B30a to NVDARequiredOS 15B 2 Link to comment Share on other sites More sharing options...
david_osx Posted October 12, 2015 Share Posted October 12, 2015 deeemn i though so but thanks i will try it now Tried it but didn't help i repaired permission then cleared cache then rebooted... but same invalid error about web drive etc when i cleared cache like the pic i posted at #171 2 Link to comment Share on other sites More sharing options...
fantomas Posted October 12, 2015 Author Share Posted October 12, 2015 I don't know if you boot with clover but... boot w/o cache + SIP disabled + nv_disable=1 --> edit your kext --> install your kext --> repair permissions + rebuild the cache with this reboot w/ cache + SIP enabled + nvda_drv=1 Link to comment Share on other sites More sharing options...
david_osx Posted October 12, 2015 Share Posted October 12, 2015 I don't know if you boot with clover but... boot w/o cache + SIP disabled + nv_disable=1 --> edit your kext --> install your kext --> repair permissions + rebuild the cache with this reboot w/ cache + SIP enabled + nvda_drv=1 Yes i do use clover and i will try these steps although not sure about rebuild cache, is it sudo InsanelyRepairPermission -rt /Volumes/Your Volume ? Link to comment Share on other sites More sharing options...
fantomas Posted October 12, 2015 Author Share Posted October 12, 2015 sudo InsanelyRepairPermission -rt /Volumes/Your Volume ? yes 1 Link to comment Share on other sites More sharing options...
david_osx Posted October 12, 2015 Share Posted October 12, 2015 yes sry it didn't help i give up now thanks for the help guys btw am i going to be stuck with beta updates unless i change back to gm and reinstall etc... maybe i could change app store update url or something to get next stable release Link to comment Share on other sites More sharing options...
rhcp011235 Posted October 13, 2015 Share Posted October 13, 2015 Anyone with the NVIDIA GeForce GTX 970 4095 MB Noticing any flickering while using DUAL display ports? its really freaking annoying. and I can't seem to figure out how to fix it. Link to comment Share on other sites More sharing options...
nemxwasp Posted October 13, 2015 Share Posted October 13, 2015 I did a fresh install of el cap and have a gtx 970 i installed the web drivers but when the os loads i get a black screen with my model set as MacPro6,1 and my boot flag as nvda_drv=1 I'm guessing like with yosemite the highest i can set my model to is MacPro5,1 when using the web drivers or does someone know a way around that? Thanks Link to comment Share on other sites More sharing options...
MTWomg Posted October 13, 2015 Share Posted October 13, 2015 Modify AppleGraphicsDevicePolicy or set MacPro3,1. Link to comment Share on other sites More sharing options...
jperkins909 Posted October 13, 2015 Share Posted October 13, 2015 iMac14,1 works4me Link to comment Share on other sites More sharing options...
david_osx Posted October 13, 2015 Share Posted October 13, 2015 guys it finally worked don't know how but it did now i just have to enable SIP if i know how 1 Link to comment Share on other sites More sharing options...
fantomas Posted October 13, 2015 Author Share Posted October 13, 2015 RtVariables CsrActiveConfig 0x00 Link to comment Share on other sites More sharing options...
david_osx Posted October 13, 2015 Share Posted October 13, 2015 <key>RtVariables</key> <dict> <key>CsrActiveConfig</key> <string>0x00</string> </dict> It works thanks 1 Link to comment Share on other sites More sharing options...
rhcp011235 Posted October 14, 2015 Share Posted October 14, 2015 I did a fresh install of el cap and have a gtx 970 i installed the web drivers but when the os loads i get a black screen with my model set as MacPro6,1 and my boot flag as nvda_drv=1 I'm guessing like with yosemite the highest i can set my model to is MacPro5,1 when using the web drivers or does someone know a way around that? Thanks use cloverconfig to make you a Imac14,2 SMBIOS that is valid and you should not have an issue. Thats all i did. and i added in my proper serial and got that working Link to comment Share on other sites More sharing options...
nemxwasp Posted October 17, 2015 Share Posted October 17, 2015 Thanks im going to give it a shot. Im going to ask a dumb question does the model matter at all? Ive always set mine to the highest macpro possible before upgrading my graphics from ati to nvidia and after that to macpro 5,1 with the nvidia web driver because 6,1 gave a black screen. Is there any difference? If so which is the best? I have an asus rampage iv black motherboard and i can get clover to boot with macpro 3,1. If theres no difference (especially for overclocking) i'll stick to it Thanks everyone Link to comment Share on other sites More sharing options...
Franz22 Posted October 20, 2015 Share Posted October 20, 2015 sorry for this off-topic but some people could find this info helpful for all people with GTX570 and device-id 0x108610de, you don't have to wait for the first beta of Nvidia WebDriver for El Capitan... you can get this card work in El Capitan (guess with previous versions too) with FakeID - 0x108110de iMac-de-fantomas1:~ fantomas1$ kextstat |grep NVDA 68 2 0xffffff7f80f63000 0x283000 0x283000 com.apple.nvidia.driver.NVDAResman (10.0.6) 14B636BC-3AFD-3039-9941-5FAEED135628 <67 62 61 12 5 4 3 1> 69 0 0xffffff7f811f1000 0x1d1000 0x1d1000 com.apple.nvidia.driver.NVDAGF100Hal (10.0.6) 13324517-226D-37EA-BB8B-13D5C8478E6A <68 12 4 3> Hello, I have the GTX 570 too but I have a problem: when I wake up OS X after hibernate mode my VGA stuck at the max frequency (732MHz) and the temperature go high...do you know how to solve this? Thanks in advance! Link to comment Share on other sites More sharing options...
Recommended Posts