chris1111 Posted July 21, 2015 Share Posted July 21, 2015 Good seed 2 Link to comment Share on other sites More sharing options...
xmen107 Posted July 21, 2015 Share Posted July 21, 2015 For me after the update i needed to move the fakesmc to S/L/E otherwise it not boot... my usb2 ports still not work on wake up from sleep. Link to comment Share on other sites More sharing options...
mendietinha Posted July 21, 2015 Share Posted July 21, 2015 downloading here... 1 Link to comment Share on other sites More sharing options...
mnfesq Posted July 21, 2015 Share Posted July 21, 2015 For me after the update i needed to move the fakesmc to S/L/E otherwise it not boot... my usb2 ports still not work on wake up from sleep. I had to put all of my Clover kexts in S/L/E in order to boot and get audio, ps2 keyboard/trackpad and all other features supported by the Clover kexts. Is it that 10.11 beta 4 requires the kexts to be in S/L/E or is this something that can be fixed in a Clover update? EDIT: Well, I started to answer my own question. I removed all of the Clover kexts I installed to El-Cap's S/L/E and it would not boot once again. Therefore, it wasn't just a case of needing those kexts to be added to the kernel cache. However, I was able to boot and have full function when I added my Clover kexts to Library/Extensions. 1 Link to comment Share on other sites More sharing options...
mendietinha Posted July 21, 2015 Share Posted July 21, 2015 I had to put all of my Clover kexts in S/L/E in order to boot and get audio, ps2 keyboard/trackpad and all other features supported by the Clover kexts. Is it that 10.11 beta 4 requires the kexts to be in S/L/E or is this something that can be fixed in a Clover update? EDIT: Well, I started to answer my own question. I removed all of the Clover kexts I installed to El-Cap's S/L/E and it would not boot once again. Therefore, it wasn't just a case of needing those kexts to be added to the kernel cache. However, I was able to boot and have full function when I added my Clover kexts to Library/Extensions. same here. for now all kexts inside S\L\E. perhaps now we need to disable the security feature in the recovery... Link to comment Share on other sites More sharing options...
chris1111 Posted July 21, 2015 Share Posted July 21, 2015 I always put my kexts on S /L /E I used FakeSMC on Clover for Booting USB Installer FakeSMC / IntelMausiEthernet / AppleHDA / HDAEnabler / Thats it 3 Link to comment Share on other sites More sharing options...
Jayphen Posted July 22, 2015 Share Posted July 22, 2015 Hmm I can't boot since updating to the latest DP. How can I move the kexts to S/L/E without booting? Link to comment Share on other sites More sharing options...
chris1111 Posted July 22, 2015 Share Posted July 22, 2015 Hmm I can't boot since updating to the latest DP. How can I move the kexts to S/L/E without booting? Do you have Yosemite on another drive? Link to comment Share on other sites More sharing options...
fusion71au Posted July 22, 2015 Share Posted July 22, 2015 Successful upgrade to DB4 here on legacy BIOS Dell XPS M1530. Third party kexts in /S/L/E, USB ports fix injected with FakeSMC, VoodooHDA for audio. Needed to use rootless=0 for initial boot after upgrade (to load FakeSMC and other hackintosh kexts), otherwise boot hangs. Can remove rootless=0 after that . 4 Link to comment Share on other sites More sharing options...
Riley Freeman Posted July 22, 2015 Share Posted July 22, 2015 After copying kexts from Clover EFI to /S/L/E I was able to boot. Couldn't get anywhere with no FakeSMC. Pike's AppleHDA loader doesn't seem to work anymore so I zipped up the copy of AppleHDA in /S/L/E in preparation for manual patching. When I realised I was using an older layout ID and couldn't be bothered dealing with this, I tried to unzip the AppleHDA kext on my desktop to put it back into /S/L/E and got permission errors trying to extract. So either rootless=0 isn't working anymore or there's another layer of protection to disable. This might be the cause of kexts failing to inject from EFI. And with all that they didn't fix the broken sidebar width from the previous beta... 2 Link to comment Share on other sites More sharing options...
Jayphen Posted July 22, 2015 Share Posted July 22, 2015 Do you have Yosemite on another drive? I do in a different machine I mounted the drive on the other machine and copied all of the kexts from EFI to /S/L/E, but I still can't boot. hmm Link to comment Share on other sites More sharing options...
chris1111 Posted July 22, 2015 Share Posted July 22, 2015 I do in a different machine I mounted the drive on the other machine and copied all of the kexts from EFI to /S/L/E, but I still can't boot. hmm Do you flag rootless=0 Link to comment Share on other sites More sharing options...
Jayphen Posted July 22, 2015 Share Posted July 22, 2015 Do you flag rootless=0 Yep. Turns out it was a perms issue (had to chown root:wheel the kexts after moving them) Link to comment Share on other sites More sharing options...
TheRacerMaster Posted July 22, 2015 Share Posted July 22, 2015 I really wish Apple added the repairPermission option back to Disk Utility. It's a PITA to manually repair them after moving the kexts... Link to comment Share on other sites More sharing options...
Pike R. Alpha Posted July 22, 2015 Share Posted July 22, 2015 After copying kexts from Clover EFI to /S/L/E I was able to boot. Couldn't get anywhere with no FakeSMC. Pike's AppleHDA loader doesn't seem to work anymore so I zipped up the copy of AppleHDA in /S/L/E in preparation for manual patching. No problems here with /System/Library/Extensions/AppleHDA892.kext Link to comment Share on other sites More sharing options...
mendietinha Posted July 22, 2015 Share Posted July 22, 2015 i guess nothing stop from working. only clover is not injecting correctly right now. Link to comment Share on other sites More sharing options...
Riley Freeman Posted July 22, 2015 Share Posted July 22, 2015 No problems here with /System/Library/Extensions/AppleHDA892.kext I'll have a closer look at things later. It was late last night when I got things going after running into the problem with FakeSMC not loading from EFI. After my existing AppleHDA892 didn't load, I built a new one with AppleHDA8Series.sh just in case but that too didn't load. If it works for you that's a good sign though. Ok, tried again. Still won't load. So I patched AppleHDA directly and that won't load either. Maybe it's an issue with Clover but something is horribly broken with this new build. Trying to unpack the copy of AppleHDA I zipped from /S/L/E gets this: 1 Link to comment Share on other sites More sharing options...
wern apfel Posted July 22, 2015 Share Posted July 22, 2015 It seems that DP4 fixed my USB eject issue Link to comment Share on other sites More sharing options...
Fabio1971 Posted July 22, 2015 Share Posted July 22, 2015 OS X 10.11 DP4 Fabio 2 Link to comment Share on other sites More sharing options...
naiclub Posted July 23, 2015 Share Posted July 23, 2015 OS X 10.11 DP4 1 Link to comment Share on other sites More sharing options...
Pike R. Alpha Posted July 23, 2015 Share Posted July 23, 2015 I'll have a closer look at things later. It was late last night when I got things going after running into the problem with FakeSMC not loading from EFI. After my existing AppleHDA892 didn't load, I built a new one with AppleHDA8Series.sh just in case but that too didn't load. If it works for you that's a good sign though. Ok, tried again. Still won't load. So I patched AppleHDA directly and that won't load either. Maybe it's an issue with Clover but something is horribly broken with this new build. Trying to unpack the copy of AppleHDA I zipped from /S/L/E gets this: Try to copy the file to your user directory with cp -X so that it skips the EAs (Extended Attributes) and then try to extract it. Link to comment Share on other sites More sharing options...
mendietinha Posted July 23, 2015 Share Posted July 23, 2015 in beta public 2 clover can´t inject kexts too. so careful with the update too, if you are on it. Link to comment Share on other sites More sharing options...
Riley Freeman Posted July 23, 2015 Share Posted July 23, 2015 Try to copy the file to your user directory with cp -Xso that it skips the EAs (Extended Attributes) and then try to extract it. My old AppleHDA patch script copies the original AppleHDA.kext to the desktop before working on the copy in /S/L/E. When I ran it on this build it did mention something about extended attributes. So thanks for this info. However in the case of this zip there was no copying. I simply right-clicked the kext in /S/L/E and chose the compress option, which saved the zip file to the desktop. So there's no opportunity there to deal with EAs. Link to comment Share on other sites More sharing options...
ndx2014 Posted July 23, 2015 Share Posted July 23, 2015 just downloaded the 10.11 beta v4. i got a (guess) very noobie question: can i install el capitan on top of yosemite /upgrade from yosemite to el capitan? is there a way that i dont have to re-install all my programs+their plist-whatever files..maybe migration assistant or timemachine? does it work well, did anyone try? Link to comment Share on other sites More sharing options...
mendietinha Posted July 23, 2015 Share Posted July 23, 2015 just downloaded the 10.11 beta v4. i got a (guess) very noobie question: can i install el capitan on top of yosemite /upgrade from yosemite to el capitan? is there a way that i dont have to re-install all my programs+their plist-whatever files..maybe migration assistant or timemachine? does it work well, did anyone try? you can simply upgrade. Link to comment Share on other sites More sharing options...
Recommended Posts