blackosx Posted May 27, 2015 Share Posted May 27, 2015 Here’s a script I wrote last year for creating font image files for both Chameleon’s and Clover’s GUI. Notes - Clover works best with monospaced fonts, where as Chameleon can use both monospaced and proportionally spaced fonts. - Both monospaced and proportional fonts can be used (for Clover, r3216 and up is required). - While this script does it’s stuff mathematically, sometimes the best results (optically) may only be achieved when making/adjusting the font files manually. Requirements ImageMagick Installing can be done using homebrew Once Homebrew is installed, you can run the following command from the Terminal: brew install imagemagick * Note: There are other ways to install ImageMagick but I've found only Homebrew does it simply with all required delegates. If you choose to install ImageMagick using other means (package installers, compile from source) then YMMV. createFont script Usage: ./createFont.sh -f[path/to/font] -s[size] <options> Help can be displayed using -h option: ./createFont.sh -h Please supply a minimum of the font and size. In this case a PNG image will be generated with the text in white on a transparent background. Options are: -a Alpha transparency for text. Value 0 thru 1 * Some versions of ImageMagick fail to render text with this option turned on. -b Background Colour. As three comma separated values Red, Green and Blue. [0-255],[0-255],[0-255] Note: background defaults to transparent. -c Colour of text. As three comma separated values Red, Green and Blue. [0-255],[0-255],[0-255] Note: text colour defaults to white. Some colour examples: Red: 205,0,0 Dark Blue: 35,43,148 Light Blue: 93,192,244 Bright Green: 91,226,81 Dark Green: 24,135,16 Bright Yellow: 219,221,47 -e Effects ---------------------------------------------------- shading Enable single colour shading effect. shadow Enable drop shadow effect (type 1 fonts only). -f Font. Either installed font name OR full file path. -h Display help. -i List installed fonts available to ImageMagick. -l Leading (Space between text lines) +/-16 (type 2) -r Reduced Character Set (Type 2 only) ---------------------------------------------------- a Do not include ANSI characters (32-127) c Do not include cyrillic characters. -s Size in pixels. Expects value between 6 and 255 -t Type ---------------------------------------------------- 1 Font type for Chameleon (Default). 2 Font type for Clover. -o Disable optimisation of final image using pngquant. -p Padding in pixels. Space between characters (type 1) -v Display version of this script. -x Disable anti aliasing. The script is not perfect and ImageMagick can do way more so if desired, feel free to improve the script but please post any updates here. Examples For a Chameleon (type 1) font: ./createFont.sh -t1 s14 -f/Users/blackosx/Library/Fonts/mplus-1c-black.ttf -b 100,150,24 Made this image: For a Clover (type 2) font: ./createFont.sh -t2 -s14 -f/Users/blackosx/Library/Fonts/mplus-1c-black.ttf -b 100,150,24 Made this image Note regarding sizes - Keep font sizes sensible as too large will be unusable. Here are two images, one using 28pt and the other using 16pt . Both of these are too large for ideal use. Note: These are using a Clover revision before 3216 where proportional spacing is not working properly. I will update these images soon. Update: to v0.87 - Added extra glyphs for radio buttons and checkboxes as per slice's request. (Note: Requires font containing those glyphs). - Included the use of imagemagik's X Constant Image option to help overcome Sherlock's issue. Update: to v0.88 - Apply X Constant Image option fix for type 2 fonts, to type 1 fonts. (Thanks for the note cecekpawon. I Finally got to it ). createFont_v0.88.zip 15 Link to comment Share on other sites More sharing options...
Slice Posted May 28, 2015 Share Posted May 28, 2015 Hi blackosx, I have another idea how to make any font to be proportional. Look We can just clamp red squares after create a line of text. GUI->Font->Proportional=true? Link to comment Share on other sites More sharing options...
blackosx Posted May 28, 2015 Author Share Posted May 28, 2015 Hi Slice That could work, but maybe allow theme designer to choose clamp colour in theme.plist as the font me be designed to show in red? Are you thinking of keeping the same font grid as currently used with Clover? Here's a visual of a font file using what you suggest. Here's an actual test font file if you want to experiment. Link to comment Share on other sites More sharing options...
Slice Posted May 28, 2015 Share Posted May 28, 2015 No. I meaned old font files will remain untouched. The red squares will be detected automatically by Clover. 1 Link to comment Share on other sites More sharing options...
blackosx Posted May 28, 2015 Author Share Posted May 28, 2015 Okay If you can create the algo to do it then I look forward to seeing the results. Link to comment Share on other sites More sharing options...
blackosx Posted May 28, 2015 Author Share Posted May 28, 2015 Updated to v0.77. Added -l option to allow adding leading (line spacing) for type 2 (Clover) font files. Example: To add 4 pixels between lines $ ./createFont.sh -t2 -f/Users/blackosx/Library/Fonts/airstrip.ttf -s16 -l4 Screenshot using font file with default leading (as v0.76) Screenshot using font file with added 4px leading (as v0.77) Link to comment Share on other sites More sharing options...
Slice Posted May 28, 2015 Share Posted May 28, 2015 Looks to be not good idea because of dirty in font images. Clover 3210 theme.plist <key>Font</key> <dict> <key>Proportional</key> <true/> Link to comment Share on other sites More sharing options...
blackosx Posted May 28, 2015 Author Share Posted May 28, 2015 That was quick! Well done Slice You're on the right track but just needs tweaking somewhere... Bed time now but I'll see if I get time tomorrow to have a look at your code to try to understand what you have done. Link to comment Share on other sites More sharing options...
Slice Posted May 29, 2015 Share Posted May 29, 2015 3211 It depends on CharWidth. There must be even value. 3212 Almost good 1 Link to comment Share on other sites More sharing options...
blackosx Posted May 29, 2015 Author Share Posted May 29, 2015 Your screenshot from 3212 looks great I'll build it and test. Well done Slice EDIT: I not seeing good results here with this font Gives me this: For comparison: (Results from previous version of Clover <3210) in post #6 Using <key>Font</key> <dict> <key>CharWidth</key> <integer>16</integer> <key>Path</key> <string>type2_airstrip_16_Cell_16x22.png</string> <key>Type</key> <string>Load</string> <key>Proportional</key> <true/> </dict> EDIT2: I was thinking maybe the font file was bad so I've made another font file using Universe Bold and run a test on Clover r3196 and r3212. Here are the results: r3196 r3212 Font file for ref: So still not perfect here as the code seems to struggle with thin characters, full stops, commas. But otherwise - very good. Link to comment Share on other sites More sharing options...
Slice Posted May 29, 2015 Share Posted May 29, 2015 More tuning is done with rev 3214. You also should carefully check font files for characters overlaps and choose best CharWidth values. My algo sensitive for extra dots in the font file. See dots after a, o, ... Font WoG_Monaco_ExtraSmooth_10W unaffected by proportional setting if CharWidth = 9. Font BoG_LucidaConsole_10W_NA affected. I corrected digits 4 and 8 by shifting them in place and committed corrected font to svn. We should create other fonts that will be good looking with proportional setting. Also good experience with theme iclover. There is good font So I am waiting other artist will create fonts good for proportional looking. Link to comment Share on other sites More sharing options...
blackosx Posted May 29, 2015 Author Share Posted May 29, 2015 More tuning is done with rev 3214. Great. I'll test this evening. You also should carefully check font files for characters overlaps and choose best CharWidth values. Font files generated using this script should not overlap. Any necessary tweaks to the font files can be done in the script. My ago sensitive for extra dots in the font file. See dots after a, o, ... Screen Shot 2015-05-29 at 15.25.24.png My only thought on this for now is some fonts where tightly packed due to trying to keep the spacing to a minimum. But now there's no reason why there cannot be more space between the characters. This will remove any chance of the char width encroaching the next character, What font file is used for your screenshot? can you post the font file? Font WoG_Monaco_ExtraSmooth_10W unaffected by proportional setting if CharWidth = 9. Font BoG_LucidaConsole_10W_NA affected. I corrected digits 4 and 8 by shifting them in place and committed corrected font to svn. I'll test with those later. Your adjustment to BOG_LucidaConsole will not be necessary if I remake all files with more space. We should create other fonts that will be good looking with proportional setting. That's what this script is for. Once we nail exactly how to best create font file for your algo then we can make as many fonts as you wish Also good experience with theme iclover. There is good font Screen Shot 2015-05-29 at 16.04.41.png So I am waiting other artist will create fonts good for proportional looking. Looks great EDIT: That's the WoB_Hellfire_Bold_9W.png file. @Slice - Have you got time to test your latest build with font files from post #10 ? I can't until later. Link to comment Share on other sites More sharing options...
droples Posted May 29, 2015 Share Posted May 29, 2015 Clover3214. I see some problems with displaying fonts only in the theme metal. In addition, it was in previous versions of Clover. If you write the name of the theme embedded is written in the menu,(EMBEDDED), the theme will look like the image below. Link to comment Share on other sites More sharing options...
blackosx Posted May 29, 2015 Author Share Posted May 29, 2015 Clover3214. I see some problems with displaying fonts only in the theme metal. metal2014.jpg Hi droples This is due to the font file. I'm pretty certain this can be fixed with a new version of the font with more spacing. I'll test tonight. In addition, it was in previous versions of Clover. If you write the name of the theme embedded is written in the menu,(EMBEDDED), the theme will look like the image below. Embedded.jpg Thanks for the note but that's more a Clover issue and not really for this thread. Link to comment Share on other sites More sharing options...
Slice Posted May 29, 2015 Share Posted May 29, 2015 What font file is used for your screenshot? can you post the font file? @Slice - Have you got time to test your latest build with font files from post #10 ? I can't until later. It is. But I have to rescale it from width 219 to 256. It should be 16x. This algo has many problems with existing fonts. It will be good with new fonts. In addition, it was in previous versions of Clover. If you write the name of the theme embedded is written in the menu,(EMBEDDED), the theme will look like the image below. Embedded.jpg Menu shows theme names as CAPITAL if the name length With legacy Clover there will be good. But we have to enter theme names manually exactly as they are. There are several problems with embedded theme that I don't want to correct. It used for extra cases. Link to comment Share on other sites More sharing options...
blackosx Posted June 1, 2015 Author Share Posted June 1, 2015 r3216 hits the spot slice! I spent my spare time this weekend debugging and understanding your recent changes for proportional spacing and thought I was close to getting it just right. But when I saw your recent change I thought I’d test. Great! I'll test with some different fonts later.. EDIT: Tested with 6 different font files created using the script and all working great. Link to comment Share on other sites More sharing options...
blackosx Posted June 1, 2015 Author Share Posted June 1, 2015 Updated to v0.78. Added -x option to disable anti aliasing (on by default). Link to comment Share on other sites More sharing options...
Slice Posted June 2, 2015 Share Posted June 2, 2015 Will try your script. About ImageMagick there is other ways to install http://www.imagemagick.org/script/binary-releases.php sudo port install ImageMagick Error: org.macports.build for port ImageMagick returned: command execution failed Please see the log file for port ImageMagick for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_ImageMagick/ImageMagick/main.log To report a bug, follow the instructions in the guide: http://guide.macports.org/#project.tickets Error: Processing of port ImageMagick failed Binary release also failed in 10.7.5 Illegal instruction: 4 because it created for Yosemite This is a mistake in macport Corrected by sudo ln -s /opt/local/include/freetype2 /opt/local/include/freetype Now the build successful! Something wrong here Sergeys-iMac:createFont_v0.78 slice$ ./createFont.sh -t2 -fFUTURA.TTF -s22 -b 100,100,100 ./createFont.sh: line 131: [: -gt: unary operator expected Canvas=0x32 | Char cell=0x2 Building ImageMagick code sequence ./createFont.sh: line 40: printf: .5: invalid number Running ImageMagick to create image /Users/slice/Downloads/createFont_v0.78/IM_Command.command: line 1: 935 Illegal instruction: 4 convert -size 0x32 -background "RGBA(100,100,100,1)" -font "FUTURA.TTF" -pointsize 22 -fill "RGBA(255,255,255,1)" -draw "text 0,2 '.'" -draw "text 0,2 ' '" -draw "text 0,2 ' '" -draw "text 0,2 ' '" -draw "text 0,2 ' '" -draw "text 0,2 ' '" -draw "text 0,2 ' '" -draw "text 0,2 ' '" -draw "text 0,2 ' '" -draw "text 0,2 ' '" -draw "text 0,2 ' '" -draw "text 0,2 ' '" -draw "text 0,2 ' '" -draw "text 0,2 ' '" -draw "text 0,2 ' '" -draw "text 0,2 ' '" -draw "text 0,4 ' '" -draw "text 0,4 ' '" -draw "text 0,4 ' '" -draw "text 0,4 ' '" -draw "text 0,4 ' '" -draw "text 0,4 ' '" -draw "text 0,4 ' '" -draw "text 0,4 ' '" -draw "text 0,4 ' '" -draw "text 0,4 ' '" -draw "text 0,4 ' '" -draw "text 0,4 ' '" -draw "text 0,4 ' '" -draw "text 0,4 ' '" -draw "text 0,4 ' '" -draw "text 0,4 ' '" -draw "text 0,6 ' '" -draw "text 0,6 '!'" -draw "text 0,6 '\"'" -draw "text 0,6 '#'" -draw "text 0,6 '$'" -draw "text 0,6 '%'" -draw "text 0,6 '&'" -draw "text 0,6 '’'" -draw "text 0,6 '('" -draw "text 0,6 ')'" -draw "text 0,6 '*'" -draw "text 0,6 '+'" -draw "text 0,6 ','" -draw "text 0,6 '-'" -draw "text 0,6 '.'" -draw "text 0,6 '/'" -draw "text 0,8 '0'" -draw "text 0,8 '1'" -draw "text 0,8 '2'" -draw "text 0,8 '3'" -draw "text 0,8 '4'" -draw "text 0,8 '5'" -draw "text 0,8 '6'" -draw "text 0,8 '7'" -draw "text 0,8 '8'" -draw "text 0,8 '9'" -draw "text 0,8 ':'" -draw "text 0,8 ';'" -draw "text 0,8 '<'" -draw "text 0,8 '='" -draw "text 0,8 '>'" -draw "text 0,8 '?'" -draw "text 0,10 '@'" -draw "text 0,10 'A'" -draw "text 0,10 'B'" -draw "text 0,10 'C'" -draw "text 0,10 'D'" -draw "text 0,10 'E'" -draw "text 0,10 'F'" -draw "text 0,10 'G'" -draw "text 0,10 'H'" -draw "text 0,10 'I'" -draw "text 0,10 'J'" -draw "text 0,10 'K'" -draw "text 0,10 'L'" -draw "text 0,10 'M'" -draw "text 0,10 'N'" -draw "text 0,10 'O'" -draw "text 0,12 'P'" -draw "text 0,12 'Q'" -draw "text 0,12 'R'" -draw "text 0,12 'S'" -draw "text 0,12 'T'" -draw "text 0,12 'U'" -draw "text 0,12 'V'" -draw "text 0,12 'W'" -draw "text 0,12 'X'" -draw "text 0,12 'Y'" -draw "text 0,12 'Z'" -draw "text 0,12 '['" -draw "text 0,12 '\\\'" -draw "text 0,12 ']'" -draw "text 0,12 '^'" -draw "text 0,12 '_'" -draw "text 0,14 '’'" -draw "text 0,14 'a'" -draw "text 0,14 'b'" -draw "text 0,14 'c'" -draw "text 0,14 'd'" -draw "text 0,14 'e'" -draw "text 0,14 'f'" -draw "text 0,14 'g'" -draw "text 0,14 'h'" -draw "text 0,14 'i'" -draw "text 0,14 'j'" -draw "text 0,14 'k'" -draw "text 0,14 'l'" -draw "text 0,14 'm'" -draw "text 0,14 'n'" -draw "text 0,14 'o'" -draw "text 0,16 'p'" -draw "text 0,16 'q'" -draw "text 0,16 'r'" -draw "text 0,16 's'" -draw "text 0,16 't'" -draw "text 0,16 'u'" -draw "text 0,16 'v'" -draw "text 0,16 'w'" -draw "text 0,16 'x'" -draw "text 0,16 'y'" -draw "text 0,16 'z'" -draw "text 0,16 '{'" -draw "text 0,16 '|'" -draw "text 0,16 '}'" -draw "text 0,16 '~'" -draw "text 0,16 '.'" -draw "text 0,18 ' '" -draw "text 0,18 ' '" -draw "text 0,18 ' '" -draw "text 0,18 ' '" -draw "text 0,18 ' '" -draw "text 0,18 ' '" -draw "text 0,18 ' '" -draw "text 0,18 ' '" -draw "text 0,18 ' '" -draw "text 0,18 ' '" -draw "text 0,18 ' '" -draw "text 0,18 ' '" -draw "text 0,18 ' '" -draw "text 0,18 ' '" -draw "text 0,18 ' '" -draw "text 0,18 ' '" -draw "text 0,20 ' '" -draw "text 0,20 ' '" -draw "text 0,20 ' '" -draw "text 0,20 ' '" -draw "text 0,20 ' '" -draw "text 0,20 ' '" -draw "text 0,20 ' '" -draw "text 0,20 ' '" -draw "text 0,20 ' '" -draw "text 0,20 ' '" -draw "text 0,20 ' '" -draw "text 0,20 ' '" -draw "text 0,20 ' '" -draw "text 0,20 ' '" -draw "text 0,20 ' '" -draw "text 0,20 ' '" -draw "text 0,22 ' '" -draw "text 0,22 ' '" -draw "text 0,22 ' '" -draw "text 0,22 ' '" -draw "text 0,22 ' '" -draw "text 0,22 ' '" -draw "text 0,22 ' '" -draw "text 0,22 ' '" -draw "text 0,22 ' '" -draw "text 0,22 ' '" -draw "text 0,22 ' '" -draw "text 0,22 ' '" -draw "text 0,22 ' '" -draw "text 0,22 ' '" -draw "text 0,22 ' '" -draw "text 0,22 ' '" -draw "text 0,24 ' '" -draw "text 0,24 ' '" -draw "text 0,24 ' '" -draw "text 0,24 ' '" -draw "text 0,24 ' '" -draw "text 0,24 ' '" -draw "text 0,24 ' '" -draw "text 0,24 ' '" -draw "text 0,24 ' '" -draw "text 0,24 ' '" -draw "text 0,24 ' '" -draw "text 0,24 ' '" -draw "text 0,24 ' '" -draw "text 0,24 ' '" -draw "text 0,24 ' '" -draw "text 0,24 ' '" -draw "text 0,26 ' '" -draw "text 0,26 ' '" -draw "text 0,26 ' '" -draw "text 0,26 ' '" -draw "text 0,26 ' '" -draw "text 0,26 ' '" -draw "text 0,26 ' '" -draw "text 0,26 ' '" -draw "text 0,26 ' '" -draw "text 0,26 ' '" -draw "text 0,26 ' '" -draw "text 0,26 ' '" -draw "text 0,26 ' '" -draw "text 0,26 ' '" -draw "text 0,26 ' '" -draw "text 0,26 ' '" -draw "text 0,28 ' '" -draw "text 0,28 ' '" -draw "text 0,28 ' '" -draw "text 0,28 ' '" -draw "text 0,28 ' '" -draw "text 0,28 ' '" -draw "text 0,28 ' '" -draw "text 0,28 ' '" -draw "text 0,28 ' '" -draw "text 0,28 ' '" -draw "text 0,28 ' '" -draw "text 0,28 ' '" -draw "text 0,28 ' '" -draw "text 0,28 ' '" -draw "text 0,28 ' '" -draw "text 0,28 ' '" -draw "text 0,30 ' '" -draw "text 0,30 ' '" -draw "text 0,30 ' '" -draw "text 0,30 ' '" -draw "text 0,30 ' '" -draw "text 0,30 ' '" -draw "text 0,30 ' '" -draw "text 0,30 ' '" -draw "text 0,30 ' '" -draw "text 0,30 ' '" -draw "text 0,30 ' '" -draw "text 0,30 ' '" -draw "text 0,30 ' '" -draw "text 0,30 ' '" -draw "text 0,30 ' '" -draw "text 0,30 ' '" -draw "text 0,32 '.'" -draw "text 0,32 ' '" -draw "text 0,32 ' '" -draw "text 0,32 ' '" -draw "text 0,32 ' '" -draw "text 0,32 ' '" -draw "text 0,32 ' '" -draw "text 0,32 ' '" -draw "text 0,32 ' '" -draw "text 0,32 ' '" -draw "text 0,32 ' '" -draw "text 0,32 ' '" -draw "text 0,32 ' '" -draw "text 0,32 ' '" -draw "text 0,32 ' '" -draw "text 0,32 ' '" label:" " "/Users/slice/Downloads/createFont_v0.78/type2_FUTURA_22pt_Cell_0x2.png" Sergeys-iMac:createFont_v0.78 slice$ Link to comment Share on other sites More sharing options...
blackosx Posted June 2, 2015 Author Share Posted June 2, 2015 Hi Slice. I use Homebrew to install ImageMagick as, for me, it was the easiest way to install it. I found the package installlers gave me problems. I think the problem you have is a bad install of imagemagick. /Users/slice/Downloads/createFont_v0.78/IM_Command.command: line 1: 935 Illegal instruction: 4 I've just installed homebrew and imagemagick on 10.6.8. $ ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" ==> This script will install: /usr/local/bin/brew /usr/local/Library/... /usr/local/share/man/man1/brew.1 ==> The following directories will be made group writable: /usr/local/. /usr/local/bin /usr/local/include /usr/local/lib /usr/local/share ==> The following directories will have their group set to admin: /usr/local/. /usr/local/bin /usr/local/include /usr/local/lib /usr/local/share Press RETURN to continue or any other key to abort ==> /usr/bin/sudo /bin/chmod g+rwx /usr/local/. /usr/local/bin /usr/local/include /usr/local/lib /usr/local/share Password: ==> /usr/bin/sudo /usr/bin/chgrp admin /usr/local/. /usr/local/bin /usr/local/include /usr/local/lib /usr/local/share ==> /usr/bin/sudo /bin/mkdir /Library/Caches/Homebrew ==> /usr/bin/sudo /bin/chmod g+rwx /Library/Caches/Homebrew ==> Downloading and installing Homebrew... ==> Installation successful! ==> Next steps Run `brew help` to get started office:createFont_v0.78 Nick$ brew install imagemagick ==> Installing dependencies for imagemagick: xz, libtool, pkg-config, jpeg, libpng, libtiff, freetype ==> Installing imagemagick dependency: xz ==> Downloading https://fossies.org/linux/misc/xz-5.2.1.tar.gz ######################################################################## 100.0% ==> ./configure --disable-silent-rules --prefix=/usr/local/Cellar/xz/5.2.1 ==> make install Error: The `brew link` step did not complete successfully The formula built, but is not symlinked into /usr/local Could not symlink include/lzma.h Target /usr/local/include/lzma.h already exists. You may want to remove it: rm '/usr/local/include/lzma.h' To force the link and overwrite all conflicting files: brew link --overwrite xz To list all files that would be deleted: brew link --overwrite --dry-run xz Possible conflicting files are: /usr/local/include/lzma.h /usr/local/include/lzma/vli.h /usr/local/include/lzma/version.h /usr/local/include/lzma/stream_flags.h /usr/local/include/lzma/index_hash.h /usr/local/include/lzma/index.h /usr/local/include/lzma/hardware.h /usr/local/include/lzma/filter.h /usr/local/include/lzma/delta.h /usr/local/include/lzma/container.h /usr/local/include/lzma/check.h /usr/local/include/lzma/block.h /usr/local/include/lzma/bcj.h /usr/local/include/lzma/base.h ==> Summary /usr/local/Cellar/xz/5.2.1: 59 files, 1.7M, built in 37 seconds ==> Installing imagemagick dependency: libtool ==> Downloading http://ftpmirror.gnu.org/libtool/libtool-2.4.6.tar.xz ######################################################################## 100.0% ==> ./configure --prefix=/usr/local/Cellar/libtool/2.4.6 --program-prefix=g --enable-ltdl-install ==> make install ==> Caveats In order to prevent conflicts with Apple's own libtool we have prepended a "g" so, you have instead: glibtool and glibtoolize. This formula is keg-only, which means it was not symlinked into /usr/local. Xcode provides this software prior to version 4.3. Generally there are no consequences of this for you. If you build your own software and it requires this formula, you'll need to add to your build variables: LDFLAGS: -L/usr/local/opt/libtool/lib CPPFLAGS: -I/usr/local/opt/libtool/include ==> Summary /usr/local/Cellar/libtool/2.4.6: 69 files, 3.8M, built in 12 seconds ==> Installing imagemagick dependency: pkg-config ==> Downloading http://pkgconfig.freedesktop.org/releases/pkg-config-0.28.tar.gz ######################################################################## 100.0% ==> ./configure --prefix=/usr/local/Cellar/pkg-config/0.28 --disable-host-tool --with-internal-glib --with-pc-path=/usr/local/lib/pkgconfig:/usr/local/share/pkg ==> make ==> make check ==> make install /usr/local/Cellar/pkg-config/0.28: 10 files, 668K, built in 46 seconds ==> Installing imagemagick dependency: jpeg ==> Downloading http://www.ijg.org/files/jpegsrc.v8d.tar.gz ######################################################################## 100.0% ==> ./configure --prefix=/usr/local/Cellar/jpeg/8d ==> make install /usr/local/Cellar/jpeg/8d: 18 files, 792K, built in 10 seconds ==> Installing imagemagick dependency: libpng ==> Downloading https://downloads.sourceforge.net/project/libpng/libpng16/1.6.17/libpng-1.6.17.tar.xz ######################################################################## 100.0% ==> ./configure --disable-silent-rules --prefix=/usr/local/Cellar/libpng/1.6.17 ==> make ==> make test ==> make install ==> Caveats This formula is keg-only, which means it was not symlinked into /usr/local. Mac OS X already provides this software in versions before Mountain Lion. Generally there are no consequences of this for you. If you build your own software and it requires this formula, you'll need to add to your build variables: LDFLAGS: -L/usr/local/opt/libpng/lib CPPFLAGS: -I/usr/local/opt/libpng/include ==> Summary /usr/local/Cellar/libpng/1.6.17: 17 files, 1.2M, built in 34 seconds ==> Installing imagemagick dependency: libtiff ==> Downloading ftp://ftp.remotesensing.org/pub/libtiff/tiff-4.0.3.tar.gz ######################################################################## 100.0% ==> ./configure --prefix=/usr/local/Cellar/libtiff/4.0.3 --without-x --disable-lzma --with-jpeg-include-dir=/usr/local/opt/jpeg/include --with-jpeg-lib-dir=/usr ==> make install /usr/local/Cellar/libtiff/4.0.3: 254 files, 3.8M, built in 27 seconds ==> Installing imagemagick dependency: freetype ==> Downloading https://downloads.sf.net/project/freetype/freetype2/2.5.5/freetype-2.5.5.tar.bz2 ######################################################################## 100.0% ==> ./configure --prefix=/usr/local/Cellar/freetype/2.5.5 --without-harfbuzz ==> make ==> make install ==> Caveats This formula is keg-only, which means it was not symlinked into /usr/local. Mac OS X already provides this software in versions before Mountain Lion. Generally there are no consequences of this for you. If you build your own software and it requires this formula, you'll need to add to your build variables: LDFLAGS: -L/usr/local/opt/freetype/lib CPPFLAGS: -I/usr/local/opt/freetype/include ==> Summary /usr/local/Cellar/freetype/2.5.5: 60 files, 2.7M, built in 23 seconds ==> Installing imagemagick ==> Downloading http://www.imagemagick.org/download/releases/ImageMagick-6.9.1-3.tar.xz curl: (22) The requested URL returned error: 404 Trying a mirror... ==> Downloading https://downloads.sourceforge.net/project/imagemagick/6.9.1-sources/ImageMagick-6.9.1-3.tar.xz ######################################################################## 100.0% ==> ./configure --disable-osx-universal-binary --prefix=/usr/local/Cellar/imagemagick/6.9.1-3 --disable-silent-rules --enable-shared --disable-static --with-mod ==> make install /usr/local/Cellar/imagemagick/6.9.1-3: 1448 files, 22M, built in 98 seconds And then run the script: $ ./createFont.sh -t2 -fFutur -s22 -b 100,100,100 Canvas=384x448 | Char cell=24x28 Building ImageMagick code sequence Running ImageMagick to create image Opening /Volumes/Data/Nick/Scripting/createFontScript/createFont_v0.78/type2_Futur_22pt_Cell_24x28.png But there's a problem as the final PNG image does not contain any text. I will need to consult the ImageMagick documentation on this for 10.6. EDIT: Fixed with createFont script v0.81. EDIT: The PNG is created fine under 10.10 Note to self - Update script to include extended ASCII character set and cyrillic characters. Done. Link to comment Share on other sites More sharing options...
Slice Posted June 2, 2015 Share Posted June 2, 2015 Hi Blackosx, I think I have installed ImageMagick. Sergeys-iMac:createFont_v0.78 slice$ /opt/local/bin/convert -version Version: ImageMagick 6.9.0-0 Q16 x86_64 2015-06-02 http://www.imagemagick.org Copyright: Copyright (C) 1999-2014 ImageMagick Studio LLC Features: DPC Modules Delegates (built-in): bzlib djvu fftw fontconfig freetype gslib jbig jng jp2 jpeg lcms ltdl lzma openexr png ps tiff webp x xml zlib Sergeys-iMac:createFont_v0.78 slice$ Tell me, what utilities used else? Link to comment Share on other sites More sharing options...
blackosx Posted June 2, 2015 Author Share Posted June 2, 2015 Hi Slice Apologies. Yes it does look like you have ImageMagick installed correctly. The problem lies with the ImageMagick command generated by my script which was highlighted by the errors you posted. ./createFont.sh: line 131: [: -gt: unary operator expected .. ./createFont.sh: line 40: printf: .5: invalid number This results in a malformed command. What version of OS X have you run the script? EDIT: To test your ImageMagick you can paste the following to a text file, save with name like makefont.command to the createfont script dir, chmod +x and double click it. convert -size 384x448 -background "RGBA(100,100,100,1)" -font "FUTURA.TTF" -pointsize 22 -fill "RGBA(255,255,255,1)" -draw "text 9,20 '.'" -draw "text 32,20 ' '" -draw "text 56,20 ' '" -draw "text 80,20 ' '" -draw "text 104,20 ' '" -draw "text 128,20 ' '" -draw "text 152,20 ' '" -draw "text 176,20 ' '" -draw "text 200,20 ' '" -draw "text 224,20 ' '" -draw "text 248,20 ' '" -draw "text 272,20 ' '" -draw "text 296,20 ' '" -draw "text 320,20 ' '" -draw "text 344,20 ' '" -draw "text 368,20 ' '" -draw "text 8,48 ' '" -draw "text 32,48 ' '" -draw "text 56,48 ' '" -draw "text 80,48 ' '" -draw "text 104,48 ' '" -draw "text 128,48 ' '" -draw "text 152,48 ' '" -draw "text 176,48 ' '" -draw "text 200,48 ' '" -draw "text 224,48 ' '" -draw "text 248,48 ' '" -draw "text 272,48 ' '" -draw "text 296,48 ' '" -draw "text 320,48 ' '" -draw "text 344,48 ' '" -draw "text 368,48 ' '" -draw "text 8,76 ' '" -draw "text 33,76 '!'" -draw "text 55,76 '\"'" -draw "text 77,76 '#'" -draw "text 101,76 '$'" -draw "text 123,76 '%'" -draw "text 148,76 '&'" -draw "text 177,76 '’'" -draw "text 201,76 '('" -draw "text 225,76 ')'" -draw "text 247,76 '*'" -draw "text 269,76 '+'" -draw "text 297,76 ','" -draw "text 320,76 '-'" -draw "text 345,76 '.'" -draw "text 366,76 '/'" -draw "text 5,104 '0'" -draw "text 30,104 '1'" -draw "text 53,104 '2'" -draw "text 77,104 '3'" -draw "text 101,104 '4'" -draw "text 125,104 '5'" -draw "text 149,104 '6'" -draw "text 173,104 '7'" -draw "text 197,104 '8'" -draw "text 221,104 '9'" -draw "text 249,104 ':'" -draw "text 273,104 ';'" -draw "text 293,104 '<'" -draw "text 317,104 '='" -draw "text 341,104 '>'" -draw "text 367,104 '?'" -draw "text 2,132 '@'" -draw "text 27,132 'A'" -draw "text 54,132 'B'" -draw "text 76,132 'C'" -draw "text 100,132 'D'" -draw "text 127,132 'E'" -draw "text 151,132 'F'" -draw "text 171,132 'G'" -draw "text 196,132 'H'" -draw "text 226,132 'I'" -draw "text 247,132 'J'" -draw "text 269,132 'K'" -draw "text 295,132 'L'" -draw "text 314,132 'M'" -draw "text 339,132 'N'" -draw "text 362,132 'O'" -draw "text 6,160 'P'" -draw "text 26,160 'Q'" -draw "text 54,160 'R'" -draw "text 78,160 'S'" -draw "text 102,160 'T'" -draw "text 124,160 'U'" -draw "text 148,160 'V'" -draw "text 168,160 'W'" -draw "text 197,160 'X'" -draw "text 221,160 'Y'" -draw "text 245,160 'Z'" -draw "text 272,160 '['" -draw "text 294,160 '\\\'" -draw "text 320,160 ']'" -draw "text 341,160 '^'" -draw "text 366,160 '_'" -draw "text 9,188 '’'" -draw "text 30,188 'a'" -draw "text 54,188 'b'" -draw "text 79,188 'c'" -draw "text 102,188 'd'" -draw "text 126,188 'e'" -draw "text 152,188 'f'" -draw "text 174,188 'g'" -draw "text 198,188 'h'" -draw "text 225,188 'i'" -draw "text 249,188 'j'" -draw "text 271,188 'k'" -draw "text 297,188 'l'" -draw "text 315,188 'm'" -draw "text 342,188 'n'" -draw "text 365,188 'o'" -draw "text 6,216 'p'" -draw "text 30,216 'q'" -draw "text 56,216 'r'" -draw "text 80,216 's'" -draw "text 105,216 't'" -draw "text 126,216 'u'" -draw "text 150,216 'v'" -draw "text 171,216 'w'" -draw "text 197,216 'x'" -draw "text 222,216 'y'" -draw "text 246,216 'z'" -draw "text 272,216 '{'" -draw "text 295,216 '|'" -draw "text 320,216 '}'" -draw "text 341,216 '~'" -draw "text 369,216 '.'" -draw "text 8,244 ' '" -draw "text 32,244 ' '" -draw "text 56,244 ' '" -draw "text 80,244 ' '" -draw "text 104,244 ' '" -draw "text 128,244 ' '" -draw "text 152,244 ' '" -draw "text 176,244 ' '" -draw "text 200,244 ' '" -draw "text 224,244 ' '" -draw "text 248,244 ' '" -draw "text 272,244 ' '" -draw "text 296,244 ' '" -draw "text 320,244 ' '" -draw "text 344,244 ' '" -draw "text 368,244 ' '" -draw "text 8,272 ' '" -draw "text 32,272 ' '" -draw "text 56,272 ' '" -draw "text 80,272 ' '" -draw "text 104,272 ' '" -draw "text 128,272 ' '" -draw "text 152,272 ' '" -draw "text 176,272 ' '" -draw "text 200,272 ' '" -draw "text 224,272 ' '" -draw "text 248,272 ' '" -draw "text 272,272 ' '" -draw "text 296,272 ' '" -draw "text 320,272 ' '" -draw "text 344,272 ' '" -draw "text 368,272 ' '" -draw "text 8,300 ' '" -draw "text 32,300 ' '" -draw "text 56,300 ' '" -draw "text 80,300 ' '" -draw "text 104,300 ' '" -draw "text 128,300 ' '" -draw "text 152,300 ' '" -draw "text 176,300 ' '" -draw "text 200,300 ' '" -draw "text 224,300 ' '" -draw "text 248,300 ' '" -draw "text 272,300 ' '" -draw "text 296,300 ' '" -draw "text 320,300 ' '" -draw "text 344,300 ' '" -draw "text 368,300 ' '" -draw "text 8,328 ' '" -draw "text 32,328 ' '" -draw "text 56,328 ' '" -draw "text 80,328 ' '" -draw "text 104,328 ' '" -draw "text 128,328 ' '" -draw "text 152,328 ' '" -draw "text 176,328 ' '" -draw "text 200,328 ' '" -draw "text 224,328 ' '" -draw "text 248,328 ' '" -draw "text 272,328 ' '" -draw "text 296,328 ' '" -draw "text 320,328 ' '" -draw "text 344,328 ' '" -draw "text 368,328 ' '" -draw "text 8,356 ' '" -draw "text 32,356 ' '" -draw "text 56,356 ' '" -draw "text 80,356 ' '" -draw "text 104,356 ' '" -draw "text 128,356 ' '" -draw "text 152,356 ' '" -draw "text 176,356 ' '" -draw "text 200,356 ' '" -draw "text 224,356 ' '" -draw "text 248,356 ' '" -draw "text 272,356 ' '" -draw "text 296,356 ' '" -draw "text 320,356 ' '" -draw "text 344,356 ' '" -draw "text 368,356 ' '" -draw "text 8,384 ' '" -draw "text 32,384 ' '" -draw "text 56,384 ' '" -draw "text 80,384 ' '" -draw "text 104,384 ' '" -draw "text 128,384 ' '" -draw "text 152,384 ' '" -draw "text 176,384 ' '" -draw "text 200,384 ' '" -draw "text 224,384 ' '" -draw "text 248,384 ' '" -draw "text 272,384 ' '" -draw "text 296,384 ' '" -draw "text 320,384 ' '" -draw "text 344,384 ' '" -draw "text 368,384 ' '" -draw "text 8,412 ' '" -draw "text 32,412 ' '" -draw "text 56,412 ' '" -draw "text 80,412 ' '" -draw "text 104,412 ' '" -draw "text 128,412 ' '" -draw "text 152,412 ' '" -draw "text 176,412 ' '" -draw "text 200,412 ' '" -draw "text 224,412 ' '" -draw "text 248,412 ' '" -draw "text 272,412 ' '" -draw "text 296,412 ' '" -draw "text 320,412 ' '" -draw "text 344,412 ' '" -draw "text 368,412 ' '" -draw "text 9,440 '.'" -draw "text 32,440 ' '" -draw "text 56,440 ' '" -draw "text 80,440 ' '" -draw "text 104,440 ' '" -draw "text 128,440 ' '" -draw "text 152,440 ' '" -draw "text 176,440 ' '" -draw "text 200,440 ' '" -draw "text 224,440 ' '" -draw "text 248,440 ' '" -draw "text 272,440 ' '" -draw "text 296,440 ' '" -draw "text 320,440 ' '" -draw "text 344,440 ' '" -draw "text 368,440 ' '" label:" " "/Users/slice/Downloads/createFont_v0.78/type2_FUTURA_22pt_Cell_0x2.png" Link to comment Share on other sites More sharing options...
Slice Posted June 2, 2015 Share Posted June 2, 2015 I am on 10.7.5. What is the size of your convert utility? my is 29700 bytes. Looks like too small. Link to comment Share on other sites More sharing options...
blackosx Posted June 2, 2015 Author Share Posted June 2, 2015 $ ls -al /Volumes/SnowLeopard/usr/local/Cellar/imagemagick/6.9.1-3/bin/ total 480 drwxr-xr-x 18 nick admin 612 2 Jun 13:33 . drwxr-xr-x 14 nick admin 476 2 Jun 13:33 .. -r-xr-xr-x 1 nick admin 1290 2 Jun 13:33 Magick++-config -r-xr-xr-x 1 nick admin 1256 2 Jun 13:33 Magick-config -r-xr-xr-x 1 nick admin 1264 2 Jun 13:33 MagickCore-config -r-xr-xr-x 1 nick admin 1504 2 Jun 13:33 MagickWand-config -r-xr-xr-x 1 nick admin 1251 2 Jun 13:33 Wand-config -r-xr-xr-x 1 nick admin 17416 2 Jun 13:33 animate -r-xr-xr-x 1 nick admin 17600 2 Jun 13:33 compare -r-xr-xr-x 1 nick admin 17424 2 Jun 13:33 composite -r-xr-xr-x 1 nick admin 17416 2 Jun 13:33 conjure -r-xr-xr-x 1 nick admin 17416 2 Jun 13:33 convert -r-xr-xr-x 1 nick admin 17416 2 Jun 13:33 display -r-xr-xr-x 1 nick admin 17480 2 Jun 13:33 identify -r-xr-xr-x 1 nick admin 17416 2 Jun 13:33 import -r-xr-xr-x 1 nick admin 17416 2 Jun 13:33 mogrify -r-xr-xr-x 1 nick admin 17416 2 Jun 13:33 montage -r-xr-xr-x 1 nick admin 17416 2 Jun 13:33 stream convert.zip Link to comment Share on other sites More sharing options...
blackosx Posted June 3, 2015 Author Share Posted June 3, 2015 Updated to v0.79 - Final PNG image for Clover (type 2) fonts will now automatically include extended ASCII and cyrillic glyphs, if they exist in the font. EDIT: For a bit of fun and to show it working. Downloaded the transformers_movie font from http://www.dafont.com/theme.php?cat=303 ./createFont.sh -t2 -f/Users/blackosx/Desktop/transformers_movie/Transformers\ Movie.ttf -s24 -o -l4 Made PNG file type2_Transformers Movie_24pt_Cell_22x23.png Threw it in Shield theme, changing theme.plist to font path and CharWidth to 22. * In this example, the text is too big as the help page type is truncated. Other pages, Options, About will also be truncated. Maybe Clover can be changed to not truncate the text if the monitor width is wide enough? EDIT2: I forgot to enable Clover's proportional spacing. Here are images with that enabled. 1 Link to comment Share on other sites More sharing options...
Slice Posted June 3, 2015 Share Posted June 3, 2015 Hi blackosx, May be you upload non-corrected script? Sergeys-iMac:createFont_v0.79 slice$ ./createFont.sh -t2 -s14 -f./arial.ttf -b 100,150,24 -o ./createFont.sh: line 140: [: -gt: unary operator expected Canvas=0x32 | Char cell=0x2 Building ImageMagick code sequence ./createFont.sh: line 40: printf: .5: invalid number Running ImageMagick to create image /Users/slice/Downloads/createFont_v0.79/IM_Command.command: line 1: 85300 Illegal instruction: 4 convert -size 0x32 -background "RGBA(100,150,24,1)" -font "./arial.ttf" -pointsize 14 -fill "RGBA(255,255,255,1)" -draw "text 0,2 ''" -draw "text 0,2 ''" -draw "text 0,2 ''" -draw "text 0,2 ''" -draw "text 0,2 ''" -draw "text 0,2 ''" -draw "text 0,2 ''" -draw "text 0,2 ''" -draw "text 0,2 ''" -draw "text 0,2 ''" -draw "text 0,2 ''" -draw "text 0,2 ''" -draw "text 0,2 ''" -draw "text 0,2 ''" -draw "text 0,2 ''" -draw "text 0,2 ''" -draw "text 0,4 ''" -draw "text 0,4 ''" -draw "text 0,4 ''" -draw "text 0,4 ''" -draw "text 0,4 ''" -draw "text 0,4 ''" -draw "text 0,4 ''" -draw "text 0,4 ''" -draw "text 0,4 ''" -draw "text 0,4 ''" -draw "text 0,4 ''" -draw "text 0,4 ''" -draw "text 0,4 ''" -draw "text 0,4 ''" -draw "text 0,4 ''" -draw "text 0,4 ''" -draw "text 0,6 ''" -draw "text 0,6 ''" -draw "text 0,6 ''" -draw "text 0,6 ''" -draw "text 0,6 ''" -draw "text 0,6 ''" -draw "text 0,6 ''" -draw "text 0,6 ''" -draw "text 0,6 ''" -draw "text 0,6 ''" -draw "text 0,6 ''" -draw "text 0,6 ''" -draw "text 0,6 ''" -draw "text 0,6 ''" -draw "text 0,6 ''" -draw "text 0,6 ''" -draw "text 0,8 ''" -draw "text 0,8 ''" -draw "text 0,8 ''" -draw "text 0,8 ''" -draw "text 0,8 ''" -draw "text 0,8 ''" -draw "text 0,8 ''" -draw "text 0,8 ''" -draw "text 0,8 ''" -draw "text 0,8 ''" -draw "text 0,8 ''" -draw "text 0,8 ''" -draw "text 0,8 ''" -draw "text 0,8 ''" -draw "text 0,8 ''" -draw "text 0,8 ''" -draw "text 0,10 ''" -draw "text 0,10 ''" -draw "text 0,10 ''" -draw "text 0,10 ''" -draw "text 0,10 ''" -draw "text 0,10 ''" -draw "text 0,10 ''" -draw "text 0,10 ''" -draw "text 0,10 ''" -draw "text 0,10 ''" -draw "text 0,10 ''" -draw "text 0,10 ''" -draw "text 0,10 ''" -draw "text 0,10 ''" -draw "text 0,10 ''" -draw "text 0,10 ''" -draw "text 0,12 ''" -draw "text 0,12 ''" -draw "text 0,12 ''" -draw "text 0,12 ''" -draw "text 0,12 ''" -draw "text 0,12 ''" -draw "text 0,12 ''" -draw "text 0,12 ''" -draw "text 0,12 ''" -draw "text 0,12 ''" -draw "text 0,12 ''" -draw "text 0,12 ''" -draw "text 0,12 ''" -draw "text 0,12 ''" -draw "text 0,12 ''" -draw "text 0,12 ''" -draw "text 0,14 ''" -draw "text 0,14 ''" -draw "text 0,14 ''" -draw "text 0,14 ''" -draw "text 0,14 ''" -draw "text 0,14 ''" -draw "text 0,14 ''" -draw "text 0,14 ''" -draw "text 0,14 ''" -draw "text 0,14 ''" -draw "text 0,14 ''" -draw "text 0,14 ''" -draw "text 0,14 ''" -draw "text 0,14 ''" -draw "text 0,14 ''" -draw "text 0,14 ''" -draw "text 0,16 ''" -draw "text 0,16 ''" -draw "text 0,16 ''" -draw "text 0,16 ''" -draw "text 0,16 ''" -draw "text 0,16 ''" -draw "text 0,16 ''" -draw "text 0,16 ''" -draw "text 0,16 ''" -draw "text 0,16 ''" -draw "text 0,16 ''" -draw "text 0,16 ''" -draw "text 0,16 ''" -draw "text 0,16 ''" -draw "text 0,16 ''" -draw "text 0,16 ''" -draw "text 0,18 ''" -draw "text 0,18 ''" -draw "text 0,18 ''" -draw "text 0,18 ''" -draw "text 0,18 ''" -draw "text 0,18 ''" -draw "text 0,18 ''" -draw "text 0,18 ''" -draw "text 0,18 ''" -draw "text 0,18 ''" -draw "text 0,18 ''" -draw "text 0,18 ''" -draw "text 0,18 ''" -draw "text 0,18 ''" -draw "text 0,18 ''" -draw "text 0,18 ''" -draw "text 0,20 ''" -draw "text 0,20 ''" -draw "text 0,20 ''" -draw "text 0,20 ''" -draw "text 0,20 ''" -draw "text 0,20 ''" -draw "text 0,20 ''" -draw "text 0,20 ''" -draw "text 0,20 ''" -draw "text 0,20 ''" -draw "text 0,20 ''" -draw "text 0,20 ''" -draw "text 0,20 ''" -draw "text 0,20 ''" -draw "text 0,20 ''" -draw "text 0,20 ''" -draw "text 0,22 ''" -draw "text 0,22 ''" -draw "text 0,22 ''" -draw "text 0,22 ''" -draw "text 0,22 ''" -draw "text 0,22 ''" -draw "text 0,22 ''" -draw "text 0,22 ''" -draw "text 0,22 ''" -draw "text 0,22 ''" -draw "text 0,22 ''" -draw "text 0,22 ''" -draw "text 0,22 ''" -draw "text 0,22 ''" -draw "text 0,22 ''" -draw "text 0,22 ''" -draw "text 0,24 ''" -draw "text 0,24 ''" -draw "text 0,24 ''" -draw "text 0,24 ''" -draw "text 0,24 ''" -draw "text 0,24 ''" -draw "text 0,24 ''" -draw "text 0,24 ''" -draw "text 0,24 ''" -draw "text 0,24 ''" -draw "text 0,24 ''" -draw "text 0,24 ''" -draw "text 0,24 ''" -draw "text 0,24 ''" -draw "text 0,24 ''" -draw "text 0,24 ''" -draw "text 0,26 ''" -draw "text 0,26 ''" -draw "text 0,26 ''" -draw "text 0,26 ''" -draw "text 0,26 ''" -draw "text 0,26 ''" -draw "text 0,26 ''" -draw "text 0,26 ''" -draw "text 0,26 ''" -draw "text 0,26 ''" -draw "text 0,26 ''" -draw "text 0,26 ''" -draw "text 0,26 ''" -draw "text 0,26 ''" -draw "text 0,26 ''" -draw "text 0,26 ''" -draw "text 0,28 ''" -draw "text 0,28 ''" -draw "text 0,28 ''" -draw "text 0,28 ''" -draw "text 0,28 ''" -draw "text 0,28 ''" -draw "text 0,28 ''" -draw "text 0,28 ''" -draw "text 0,28 ''" -draw "text 0,28 ''" -draw "text 0,28 ''" -draw "text 0,28 ''" -draw "text 0,28 ''" -draw "text 0,28 ''" -draw "text 0,28 ''" -draw "text 0,28 ''" -draw "text 0,30 ''" -draw "text 0,30 ''" -draw "text 0,30 ''" -draw "text 0,30 ''" -draw "text 0,30 ''" -draw "text 0,30 ''" -draw "text 0,30 ''" -draw "text 0,30 ''" -draw "text 0,30 ''" -draw "text 0,30 ''" -draw "text 0,30 ''" -draw "text 0,30 ''" -draw "text 0,30 ''" -draw "text 0,30 ''" -draw "text 0,30 ''" -draw "text 0,30 ''" -draw "text 0,32 ''" -draw "text 0,32 ''" -draw "text 0,32 ''" -draw "text 0,32 ''" -draw "text 0,32 ''" -draw "text 0,32 ''" -draw "text 0,32 ''" -draw "text 0,32 ''" -draw "text 0,32 ''" -draw "text 0,32 ''" -draw "text 0,32 ''" -draw "text 0,32 ''" -draw "text 0,32 ''" -draw "text 0,32 ''" -draw "text 0,32 ''" -draw "text 0,32 ''" label:" " "/Users/slice/Downloads/createFont_v0.79/type2_arial_14pt_Cell_0x2.png" Sergeys-iMac:createFont_v0.79 slice$ It's a pity my ImageMagick always get "Illegal instruction 4" with any fonts. Working with images fine Link to comment Share on other sites More sharing options...
Recommended Posts