Dajjal Posted May 21, 2015 Share Posted May 21, 2015 Here is the Issue i'm having on my X58A system in my Sig...... Once i reach the GUI i only see my Test Yosemite HD & Recovery. http://postimg.org/image/g3yqa5mjb/ When i choose Exit Clover i see a quick b1f initL (or summ along those lines) then a Blinking cursor at the Top left then it comes back to the GUI then i see my Other HD's, Chameleon (Mavericks & Snow Leopard) and (Snow Leopard Without any Booloader files) http://postimg.org/image/rrss4pbo7/ If i choose exit again i go into a Grey screen with options to add/change boot file & orders etc but it does nothing next time i reboot. What I've tried without success.... 1.All variations of Boot0 (af/ss), also the option to not update any MBR/PBR sectors 2.Adding custom entries (UUID's, also tried specifying boot file) 3.Create a USB with Only Clover Installed 4.Tried BiosBlockIO 5.Boot options Legacy/PBRtest/PBR 6.Disable Quick Boot 7.Change Physical Sata Ports The Only thing that seems to get it to read all my HD's is If i Format the test USB to MBR ( FDisk_partition_scheme ) but then i'll have to Change my OS HD's to MBR as well but i'm not quite sure if that's a good idea cause isn't it suppose to be GUID ? I could just use the USB to Boot from but i don't want that either so i'm stuck.I'll like to get some feed back plz.....Bless Attached is Boot/Pre-boot logs. Normal GUI bootlog.log.txt Normal GUI preboot.log.txt Exit GUI bootlog.log.txt Exit GUI preboot.log.txt 1 Link to comment Share on other sites More sharing options...
xmen107 Posted May 22, 2015 Share Posted May 22, 2015 Here is the Issue i'm having on my X58A system in my Sig...... Once i reach the GUI i only see my Test Yosemite HD & Recovery. http://postimg.org/image/g3yqa5mjb/ When i choose Exit Clover it comes back to the GUI then i see my Other HD's, Chameleon (Mavericks & Snow Leopard) and (Snow Leopard Without any Booloader files) http://postimg.org/image/rrss4pbo7/ If i choose exit again i go into a Grey screen with options to add/change boot file & orders etc but it does nothing next time i reboot. What if tried without success.... 1.All variations of Boot0(af/ss), also the option to not update any MBR/PBR sectors 2.Adding custom entries 3.Create a USB with Only Clover Installed 4.Tried BiosBlockIO 4.Disable Quick Boot 5.Change Sata Ports The Only thing that seems to get it to read all my HD's is If i Format the test USB to MBR ( FDisk_partition_scheme ) but then i'll have to Change my OS HD's to MBR as well but i'm not quite sure if that's a good idea cause isn't it suppose to be GUID ? I could just use the USB to Boot from but i don't want that either so i'm stuck.I'll like to get some feed back plz.....Bless Attached is Boot/Pre-boot logs. Same problem here with legacy boot and using a hybrid partition table. Link to comment Share on other sites More sharing options...
buttcrap Posted June 13, 2015 Share Posted June 13, 2015 Same problem here with legacy boot and using a hybrid partition table. Oooooh boy this is not a safe place to openly admit to using a hybrid partition scheme. Seriously, if your data is anywhere near important, don't use that. I would recommend making backups immediately if you haven't, you're sitting on a very real ticking time bomb. I just ruined my drive's smart status by running that and getting data corruption Link to comment Share on other sites More sharing options...
Slice Posted June 13, 2015 Share Posted June 13, 2015 I don't understand. You can boot but for some reason want to exit Clover. And what? You wonder what you see? Link to comment Share on other sites More sharing options...
Dajjal Posted June 16, 2015 Author Share Posted June 16, 2015 @Slice The Problem is the First time i get to the GUI i don't see my other HD's with their respective OS's, it's only when i exit then it comes back to the GUI with the way it suppose to be or at least how i think it should be based on how it looks when i just use Chameleon Link to comment Share on other sites More sharing options...
Slice Posted June 16, 2015 Share Posted June 16, 2015 @Slice The Problem is the First time i get to the GUI i don't see my other HD's with their respective OS's, it's only when i exit then it comes back to the GUI with the way it suppose to be or at least how i think it should be based on how it looks when i just use Chameleon understand now. It looks like first time you booted one Clover and after exit another. Look your disks configurations and where installed what. Remember sequence: boot0(sector MBR)->boot1(first partition sector)->boot(on this partition)->CloverX64.efi(from any partitions found, USB priority). Link to comment Share on other sites More sharing options...
Dajjal Posted June 16, 2015 Author Share Posted June 16, 2015 I only have Clover on 1 HD @ (Yosemite) the other 2 Disks have Chameleon (SL & Mavericks) and i don't have My Clover USB attached....... Link to comment Share on other sites More sharing options...
alexanderq Posted June 16, 2015 Share Posted June 16, 2015 Here is your problem my friend. 0:100 0:000 SelfDirPath = \EFI\BOOT -----Normal GUI bootlog.log.txt1:440 0:000 SelfDirPath = \EFI\CLOVER ---- Exit GUI bootlog.log.txt 1 Link to comment Share on other sites More sharing options...
Dajjal Posted June 17, 2015 Author Share Posted June 17, 2015 I saw that but since Clover installed it i thought it was needed.I deleted EFI/BOOT/BOOTIA32.efi & BOOTX64.efi and problem solved.What is the purpose of that Path guys? Link to comment Share on other sites More sharing options...
Maniac10 Posted June 17, 2015 Share Posted June 17, 2015 That's for UEFI boot. 1 Link to comment Share on other sites More sharing options...
Recommended Posts