Jump to content

Clover Problems and Solutions


ErmaC
3,206 posts in this topic

Recommended Posts

hello.

 

here is bus fix file.

 

please test and upload cloverlog(full log=get log file), end type "sysctl hw.busfrequency" in terminal and write it when report.

i want to test each intel cpu generation.

 

thanks in advance

 

Report; 2nd Gen Intel Core i3-2330M @2.2GHz under 10.13 Beta 2. Thanks  :)

Last login: Wed Jun 28 18:52:06 on console
Badruzeus-MBP:~ badruzeus$ sysctl hw.busfrequency
hw.busfrequency: 100000000
Badruzeus-MBP:~ badruzeus$ 

Bootlog_Clover_r4099_Sherlock_Test.txt

  • Like 1
Link to comment
Share on other sites

hello.

 

here is bus fix file.

 

please test and upload cloverlog(full log=get log file), end type "sysctl hw.busfrequency" in terminal and write it when report.

i want to test each intel cpu generation.

 

 

 

thanks in advance

 

@Sherlocks,

 

For my Intel Nehalem i5-750 with test5.zip r4099....

fusion71aus-iMac:~ fusion71au$ sysctl hw.busfrequency
hw.busfrequency: 8000000

Compare with standard Clover r4097

fusion71aus-iMac:~ fusion71au$ sysctl hw.busfrequency
hw.busfrequency: 132000000

Bootlog_Clover_r4099_Sherlocks.txt.zip attached to post.

 

 

 

Good. I hope your test. Because i need nehalem log with debug.

 

Can you help me continuesly? I will send pm to you.

 

나의 LG-F800S 의 Tapatalk에서 보냄

 

Sure.

Bootlog_Clover_r4099_Sherlocks.txt.zip

Link to comment
Share on other sites

@Sherlocks,

 

For my Intel Nehalem i5-750 with test5.zip r4099....

fusion71aus-iMac:~ fusion71au$ sysctl hw.busfrequency
hw.busfrequency: 8000000
Bootlog_Clover_r4099_Sherlocks.txt.zip attached to post.
Good. I hope your test. Because i need nehalem log with debug.

 

Can you help me continuesly? I will send pm to you.

 

나의 LG-F800S 의 Tapatalk에서 보냄

Link to comment
Share on other sites

 

Here's the report for the C2D E7200:

 

Sysctl r4035 (correct frequency?):

hw.busfrequency: 1068000000
With r4098:
hw.busfrequency: 264000000

Test4 bootlog:

 

attachicon.gifbootlog test4 Sherlock r4098.txt

 

 

Besides my friend says that System Profile stopped reporting the bus speed/freq, only r4035 did:
 
  Nombre del modelo: iMac
  Identificador del modelo: iMac9,1
  Nombre del procesador: Intel Core 2 Duo
  Velocidad del procesador: 2,53 GHz
  Cantidad de procesadores: 1
  Cantidad total de núcleos: 2
  Caché de nivel 2: 3 MB
  Memoria: 4 GB
  Velocidad del bus: 1,07 GHz
  Versión de la ROM de arranque: IM91.008D.B08
 
 

 

No, correct value for Bus Frequency is 266MHz. But some OEMs mix it with FSB = BUS*4.

So 4098 is better.

  • Like 1
Link to comment
Share on other sites

No, correct value for Bus Frequency is 266MHz. But some OEMs mix it with FSB = BUS*4.

So 4098 is better.

 

i checked macmini3,1 s/p.

shown 1.07 bus speed

 

now, i'm collecting correct information bus of each intel cpu generation with qpi, pis, etc. almost learning data alone.

also code operation of some parts is not working. confirmed it from hard debug.

 

still need to debug each cpu from users. i will inform more correct information. 

 

thanks in advance

 

하드웨어 개요:

 

  모델명: Mac mini

  모델 식별자: Macmini3,1

  프로세서 이름: Intel Core 2 Duo

  프로세서 속도: 2 GHz

  프로세서 개수: 1

  코어 개수: 2

  L2 캐시: 3 MB

  메모리: 2 GB

  버스 속도: 1.07 GHz

  Boot ROM 버전: MM31.0081.B06

  SMC 버전(시스템): 1.35f0

Link to comment
Share on other sites

Report r4099 test5 CPU C2D E7200: Salida Terminal Clover test5 Sherlock r4099.txt

 

Still nothing in System Profile. Just up to r4035 official shown 1.07 bus speed.

 

Onyx.app shown 5 GT/s (bus speed) as the same with all tested revisions from the r4047 to test5.

 

Thanks.

 

EDITED:

Apparently, at beginning bdmesg looks ok BUT... see this line:

4:909  0:000  === [ PatchSmbios ] =======================================
4:909  0:000  ExternalClock: 4 MHz

Salida Terminal Clover r4035 CPU bus speed OK.txt

Edited by juanerson
  • Like 1
Link to comment
Share on other sites

Report r4099 test5 CPU C2D E7200: attachicon.gifSalida Terminal Clover test5 Sherlock r4099.txt

 

Still nothing in System Profile. Just up to r4035 official shown 1.07 bus speed.

 

Onyx.app shown 5 GT/s (bus speed) as the same with all tested revisions from the r4047 to test5.

 

Thanks.

Wait about 5mintues. I will upload new build.

 

나의 LG-F800S 의 Tapatalk에서 보냄

 

Report r4099 test5 CPU C2D E7200: attachicon.gifSalida Terminal Clover test5 Sherlock r4099.txt

 

Still nothing in System Profile. Just up to r4035 official shown 1.07 bus speed.

 

Onyx.app shown 5 GT/s (bus speed) as the same with all tested revisions from the r4047 to test5.

 

Thanks.

 

EDITED:

 

Apparently, at beginning bdmesg looks ok BUT... see this line:

4:909  0:000  === [ PatchSmbios ] =======================================
4:909  0:000  ExternalClock: 4 MHz
 
Please see the report.

 

 

 

here. please report with terminal command result "sysctl hw.busfrequency". hard to debug. because i don't have old cpu. if i have, it's easy..

 

my skylake(since sandy) is no problem. remain to optimize code and to check config.plist value work or not

RC1.zip

  • Like 2
Link to comment
Share on other sites

 

Good News. Success.

attachicon.gifbdmesg Clover r4099 Sherlock RC1 CPU C2D E7200 Success.txt

iMac-de-juanerson:~ juanerson$ sysctl hw.busfrequency

hw.busfrequency: 1068000000
SP, Onyx and Hardware Monitor, all OK.
Thank You very much.

 

 

okay. log is good. 

 

There is a problem with max speed on table type4 in the Clover 4097 official package.
It was discovered during the fix and I will patch it soon.
RC2 and RC3 should be tested in the future.
 
Can you test freq and bus freq values in the cpu field in config.plist?
Link to comment
Share on other sites

Sure. Tell me please how test that?

Test1. Change Cpu freq 2533(your original) to 2000 in config.plist. then get log and check your cpu freq in System profiler

 

Test2. Change bus freq 267000(your original) to 260000 in config.plist. then get log and check your freq any tools.

 

Test3. Change QPI 1067 to 1000 in config.plist. then get log and check terminal command

 

Please get log according each test.

 

Important test1 and test2 sometimes causes unstable system. Just for test to check work or not. So, make usb that can boot when you faced any situtation.

 

Thanks in advance.

 

나의 LG-F800S 의 Tapatalk에서 보냄

Link to comment
Share on other sites

 

Good News. Success.

attachicon.gifbdmesg Clover r4099 Sherlock RC1 CPU C2D E7200 Success.txt

iMac-de-juanerson:~ juanerson$ sysctl hw.busfrequency

hw.busfrequency: 1068000000
SP, Onyx and Hardware Monitor, all OK.
Thank You very much.

 

No, this is wrong value.

1066MHz is FSB = BUS*4

There are no QPI for Penryn processor.

Link to comment
Share on other sites

No, this is wrong value.

1066MHz is FSB = BUS*4

There are no QPI for Penryn processor.

I wonder one.

Real Macmini3,1 shown bus speed 1.07 in system profiler. I checked SP dump.

 

This is not QPI? Like you said, macmini have to shown 267 bus speed in SP?

 

Im confused to fix issue.

 

나의 LG-F800S 의 Tapatalk에서 보냄

Link to comment
Share on other sites

Another Problem.

 

Clover Only install to disk1s1 but the real efi is disk0s1 so it always shows error.

 

 

 

Now I see what is the problem. Thanks for the information.

I wonder one.

Real Macmini3,1 shown bus speed 1.07 in system profiler. I checked SP dump.

 

This is not QPI? Like you said, macmini have to shown 267 bus speed in SP?

 

Im confused to fix issue.

 

나의 LG-F800S 의 Tapatalk에서 보냄

There is no bug. There is different understanding what is BusSpeed and how it used in macOS.

CpuFrequency = BusSpeed * CurrentMultiplier

OK?

 

On the other hand you can see sources of AppleSmbios.kext not new but latest opened.

        cpuSpeedMHz = cpuInfo->maximumClock;
        DEBUG_LOG("SMBIOS: CPU speed (MHz) = %u\n", cpuSpeedMHz);
        if (busSpeedMTs == 0)
        {
            busSpeedMTs = cpuInfo->externalClock;
            busSpeedMTs *= 4;  // Assume quad-pumped FSB
            DEBUG_LOG("SMBIOS: FSB speed (MT/s) = %u\n", busSpeedMTs);
        }

And more...

  • Like 2
Link to comment
Share on other sites

No, this is wrong value.

1066MHz is FSB = BUS*4

There are no QPI for Penryn processor.

According to Intel: http://ark.intel.com/products/35348/Intel-Core2-Duo-Processor-E7200-3M-Cache-2_53-GHz-1066-MHz-FSB

Bus Speed = 1066 MHz FSB

 

FSB QDR (266 MHz *4)

FSB Real Clock = 266 MHz (QDR) = External Clock

FSB Effective Speed = 1066 MHz

So, the information in SP, Onyx, Hardware Monitor, etc is OK for the C2D E7200.

Edited by juanerson
  • Like 1
Link to comment
Share on other sites

According to Intel: http://ark.intel.com/products/35348/Intel-Core2-Duo-Processor-E7200-3M-Cache-2_53-GHz-1066-MHz-FSB

Bus Speed = 1066 MHz FSB

 

FSB QDR (266 MHz *4)

FSB Real Clock = 266 MHz (QDR) = External Clock

FSB Effective Speed = 1066 MHz

So, the information in SP, Onyx, Hardware Monitor, etc is OK for the C2D E7200.

 

 

Exactly, i've got a Q9400 penryn showing wrong value with current clover rev.

Penryn have "quad pumped internal FSB", as intel said in 2008 commercial datasheets  :)

Link to comment
Share on other sites

Exactly, i've got a Q9400 penryn showing wrong value with current clover rev.

Penryn have "quad pumped external FSB", as intel said in 2008 commercial datasheets :)

Try this

http://www.insanelymac.com/forum/index.php?/topic/306156-Clover-Bug/Issue-Report-and-Patch&do=findComment&comment=2453580

 

And get bootlog.

 

나의 LG-F800S 의 Tapatalk에서 보냄

  • Like 1
Link to comment
Share on other sites

Here it is

0:100  0:100  MemLog inited, TSC freq: 3199885610
0:100  0:000  LegacyRegion2: Chipset/proc: 0x2E208086
0:100  0:000   Intel Series 4 and similar (PAM 0x90-0x96)
0:100  0:000   Test PAM1=(0x41=90, 0x5a=00, 0x81=00, 0x91=11) at chipset 2E208086
0:100  0:000  , Install = Success
0:109  0:009  BiosVideoDriverBindingStart!
0:109  0:000  BiosVideoCheckForVbe
0:109  0:000  EdidOverride not found
0:170  0:060   Edid1-
0:190  0:020   Edid0+
0:190  0:000   found Detail Timing 1680x1050
0:235  0:044     0 640x480 attr=3BF - ok, edid+, 640x480, working, highest, pref=0
0:236  0:001     1 800x600 attr=3BF - ok, edid+, 800x600, working, highest, pref=1
0:238  0:001     2 1024x768 attr=3BF - ok, edid+, 1024x768, working, highest, pref=2
0:240  0:001     3 1280x1024 attr=3BF - ok, edid+, working, highest, pref=3
0:249  0:009     4 1680x1050 attr=3BF - ok, edid+, working, highest, pref=4
0:251  0:001     5 1280x800 attr=3BF - ok, edid-
0:251  0:000  BV new mode: 4 1680x1050
0:538  0:287   SetMode pref 4 (4) = Success
3:105  2:567  
3:105  0:000  Now is 30.6.2017,  16:0:13 (GMT)
3:105  0:000  Starting Clover revision: 4099 on CLOVER EFI
3:105  0:000  Build with: [Args: -mc --no-usb -D NO_GRUB_DRIVERS_EMBEDDED -D CHECK_FLAGS -t XCODE8 | -D DISABLE_USB_SUPPORT -D NO_GRUB_DRIVERS_EMBEDDED -D CHECK_FLAGS -D USE_BIOS_BLOCKIO -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE8 -n 5 | OS: 10.12.6 | XCODE: 8.3.3]
3:105  0:000  SelfDevicePath=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,37CBC476-9882-4946-9EAA-1D98B743AA2C,0x28,0x64000) @DE441D98
3:105  0:000  SelfDirPath = \EFI\CLOVER
3:105  0:000  === [ Get Smbios ] ========================================
3:105  0:000  Type 16 Index = 0
3:105  0:000  Total Memory Slots Count = 4
3:105  0:000  Type 17 Index = 0
3:105  0:000  SmbiosTable.Type17->Speed = 1066MHz
3:105  0:000  SmbiosTable.Type17->Size = 2048MB
3:105  0:000  SmbiosTable.Type17->Bank/Device = BANK0 DIMM0
3:105  0:000  SmbiosTable.Type17->Vendor = Manufacturer00
3:105  0:000  SmbiosTable.Type17->SerialNumber = SerNum00
3:105  0:000  SmbiosTable.Type17->PartNumber = ModulePartNumber00
3:105  0:000  Type 17 Index = 1
3:105  0:000  SmbiosTable.Type17->Speed = 1066MHz
3:105  0:000  SmbiosTable.Type17->Size = 2048MB
3:105  0:000  SmbiosTable.Type17->Bank/Device = BANK1 DIMM1
3:105  0:000  SmbiosTable.Type17->Vendor = Manufacturer01
3:105  0:000  SmbiosTable.Type17->SerialNumber = SerNum01
3:105  0:000  SmbiosTable.Type17->PartNumber = ModulePartNumber01
3:105  0:000  Type 17 Index = 2
3:105  0:000  SmbiosTable.Type17->Speed = 1066MHz
3:105  0:000  SmbiosTable.Type17->Size = 2048MB
3:105  0:000  SmbiosTable.Type17->Bank/Device = BANK2 DIMM2
3:105  0:000  SmbiosTable.Type17->Vendor = Manufacturer02
3:105  0:000  SmbiosTable.Type17->SerialNumber = SerNum02
3:105  0:000  SmbiosTable.Type17->PartNumber = ModulePartNumber02
3:105  0:000  Type 17 Index = 3
3:105  0:000  SmbiosTable.Type17->Speed = 1066MHz
3:105  0:000  SmbiosTable.Type17->Size = 2048MB
3:105  0:000  SmbiosTable.Type17->Bank/Device = BANK3 DIMM3
3:105  0:000  SmbiosTable.Type17->Vendor = Manufacturer03
3:105  0:000  SmbiosTable.Type17->SerialNumber = SerNum03
3:105  0:000  SmbiosTable.Type17->PartNumber = ModulePartNumber03
3:105  0:000  Boot status=0
3:105  0:000  Running on: 'System Product Name' with board 'P5Q DELUXE'
3:105  0:000  === [ GetCPUProperties ] ==================================
3:105  0:000  CPU Vendor = 756E6547 Model=1067A
3:105  0:000   The CPU supported SSE4.1
3:105  0:000  got cores from CPUID_1 = 4
3:105  0:000  The CPU not supported turbo
3:105  0:000  BrandString = Intel(R) Core(TM)2 Quad CPU    Q9400  @ 2.66GHz
3:105  0:000   Calibrated TSCFrequency =3199885610 =3199MHz
3:105  0:000  MSR dumps:
3:105  0:000  	@0x00CD=80000A04
3:105  0:000  	@0x0198=616081F0600081F
3:105  0:000  QPI(1)ExternalClock: 400 MHz
3:105  0:000  Take FSB: 475000 kHz
3:105  0:000  FSBFrequency = 475 MHz, DMI FSBFrequency = 400 MHz, 
3:105  0:000  (2)FSBFrequency : 400 MHz
3:105  0:000  Corrected FSBFrequency = 400 MHz
3:105  0:000  PIS(1): 1600 MHz
3:105  0:000  MaxSpeed(1): 3200 MHz
3:105  0:000  MaxDiv/MinDiv: 8.0/6
3:105  0:000  Turbo: 9/0/0/0
3:105  0:000  Features: 0xBFEBFBFF
3:105  0:000  Threads: 4
3:105  0:000  Cores: 4
3:105  0:000  FSB: 400 MHz
3:105  0:000  CPU: 3800 MHz
3:105  0:000  TSC: 3800 MHz
3:105  0:000  PIS: 1600 MHz
3:105  0:000  ExternalClock: 400 MHz
3:105  0:000  === [ GetDevices ] ========================================
3:105  0:000  PCI (00|00:00.00) : 8086 2E20 class=060000
3:105  0:000  PCI (00|00:01.00) : 8086 2E21 class=060400
3:105  0:000  PCI (00|01:00.00) : 10DE 1284 class=030000
3:105  0:000   - GFX: Model=Asus GeForce GT 630 family 108 (Nvidia)
3:105  0:000  PCI (00|01:00.01) : 10DE 0E0F class=040300
3:105  0:000   - HDMI Audio: 
3:105  0:000  PCI (00|00:1A.00) : 8086 3A37 class=0C0300
3:105  0:000  PCI (00|00:1A.01) : 8086 3A38 class=0C0300
3:105  0:000  PCI (00|00:1A.02) : 8086 3A39 class=0C0300
3:105  0:000  PCI (00|00:1A.07) : 8086 3A3C class=0C0320
3:105  0:000  PCI (00|00:1B.00) : 8086 3A3E class=040300
3:105  0:000  PCI (00|00:1C.00) : 8086 3A40 class=060400
3:105  0:000  PCI (00|04:00.00) : 14E4 43A0 class=028000
3:105  0:000   - WIFI: Vendor=Broadcom
3:105  0:000  PCI (00|00:1C.02) : 8086 3A44 class=060400
3:105  0:000  PCI (00|03:00.00) : 1B73 1100 class=0C0330
3:105  0:000  PCI (00|00:1C.05) : 8086 3A4A class=060400
3:105  0:000  PCI (00|02:00.00) : 11AB 4364 class=020000
3:105  0:000   - LAN: 0 Vendor=Marvell
3:105  0:000  PCI (00|00:1D.00) : 8086 3A34 class=0C0300
3:106  0:000  PCI (00|00:1D.01) : 8086 3A35 class=0C0300
3:106  0:000  PCI (00|00:1D.02) : 8086 3A36 class=0C0300
3:106  0:000  PCI (00|00:1D.07) : 8086 3A3A class=0C0320
3:106  0:000  PCI (00|00:1E.00) : 8086 244E class=060401
3:106  0:000  PCI (00|05:03.00) : 11C1 5811 class=0C0010
3:106  0:000  PCI (00|00:1F.00) : 8086 3A16 class=060100
3:106  0:000  PCI (00|00:1F.02) : 8086 3A22 class=010601
3:106  0:000  PCI (00|00:1F.03) : 8086 3A30 class=0C0500
3:106  0:000  === [ GetDefaultSettings ] ================================
3:106  0:000  Clover load options size = 0 bytes
3:108  0:002  EFI\CLOVER\config.plist loaded: Success
3:108  0:000  === [ GetListOfThemes ] ===================================
3:108  0:000  - [00]: embedded
3:110  0:001  - [00]: random
3:110  0:000  - [00]: bootcamp
3:113  0:003  === [ Found config plists ] ===============================
3:113  0:000  - config.plist
3:114  0:000  === [ GetEarlyUserSettings ] ==============================
3:114  0:000  timeout set to 5
3:114  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
3:114  0:000  KextsToPatch: 3 requested
3:114  0:000   - [00]: IOAHCIBlockStorage (activation TRIM) :: BinPatch :: data len: 11
3:114  0:000   - [01]: AppleHDA (AD2000B dans AppleHDA) :: BinPatch :: data len: 4
3:114  0:000   - [02]: AppleHDA (suppression logs AppleHDA) :: BinPatch :: data len: 16
3:114  0:000  Default theme: bootcamp
3:114  0:000  === [ LoadDrivers ] =======================================
3:115  0:000  Loading AppleImageCodec-64.efi  status=Success
3:116  0:000  Loading AppleKeyAggregator-64.efi  status=Success
3:116  0:000  Loading AppleUITheme-64.efi  status=Success
3:116  0:000  Loading FirmwareVolume-64.efi  status=Success
3:116  0:000  Loading FSInject-64.efi  status=Success
3:116  0:000  Loading SMCHelper-64.efi  status=Success
3:116  0:000  Loading HFSPlus-64.efi  status=Success
3:117  0:001   - driver needs connecting
3:117  0:000  Loading XhciDxe-64.efi  status=Success
3:118  0:000   - driver needs connecting
3:118  0:000  2 drivers needs connecting ...
3:118  0:000  PlatformDriverOverrideProtocol->GetDriver overriden
3:118  0:000  HFS+ driver loaded
3:127  0:009  PciIo started
3:127  0:000  HcDevicePath found
3:127  0:000  attribute saved=700
3:127  0:000  attribute supports=8700 Status=Success
3:127  0:000  device enable status=Success
3:127  0:000  Create USB2HC
3:127  0:000  will not apply workaround to test, N=8
3:127  0:000  Xhc HCI version=0
3:127  0:000  PageSize = 1
3:127  0:000  XhcCreateUsb3Hc: Capability length 0x80
3:127  0:000  XhcCreateUsb3Hc: ExtCapRegBase 0x8000
3:127  0:000  XhcCreateUsb3Hc: HcSParams1 0x8000820
3:127  0:000  XhcCreateUsb3Hc: HcSParams2 0xFC000054
3:127  0:000  XhcCreateUsb3Hc: HcCParams 0x200071E1
3:127  0:000  XhcCreateUsb3Hc: DBOff 0x3000
3:127  0:000  XhcCreateUsb3Hc: RTSOff 0x2000
3:127  0:000  XhcCreateUsb3Hc: UsbLegSupOffset 0x330
3:127  0:000  XhcCreateUsb3Hc: DebugCapSupOffset 0x340
3:127  0:000  XhcIntelQuirks
3:127  0:000  XhcResetHC
3:129  0:002  Initialize the schedule
3:129  0:000  Start the Host Controller
3:129  0:000  XhcDriverBindingStart: XHCI started for controller @ DF4DF318
3:228  0:098  XhcReset: status Success
3:228  0:000  XhcGetState: current state 0
3:228  0:000  XhcSetState: status Success
3:228  0:000  XhcGetCapability: 8 ports, 64 bit capable=1
3:266  0:037  === [ InitScreen ] ========================================
3:266  0:000  Console modes reported: 4, available modes:
3:266  0:000   - [01]: 80x25
3:266  0:000   - [02]: 80x50
3:266  0:000   - [03]: 100x31
3:266  0:000   - [04]: 210x55 (current mode)
3:266  0:000  SetScreenResolution: 1680x1050 - already set
3:266  0:000  reinit: self device path=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,37CBC476-9882-4946-9EAA-1D98B743AA2C,0x28,0x64000)
3:266  0:000  === [ GetMacAddress ] =====================================
3:266  0:000  === [ ScanSPD ] ===========================================
3:266  0:000  SMBus device : 8086 3A30 class=0C0500 status=Success
3:266  0:000  SMBus CmdReg: 0x3
3:266  0:000  Scanning SMBus [8086:3A30], mmio: 0xFCFFF404, ioport: 0x400, hostc: 0x1
3:266  0:000  Slots to scan [8]...
3:266  0:000  SPD[0]: Type 8 @0x50
3:281  0:014  DDR speed 800MHz
3:281  0:000  Slot: 0 Type 19 2048MB 800MHz Vendor=G Skill Intl PartNo=F2-8500CL5-2GBPK SerialNo=0000000000000000
3:282  0:000  SPD[1]: Type 8 @0x51
3:296  0:014  DDR speed 800MHz
3:296  0:000  Slot: 1 Type 19 2048MB 800MHz Vendor=G Skill Intl PartNo=F2-8500CL5-2GBPK SerialNo=0000000000000000
3:297  0:000  SPD[2]: Type 8 @0x52
3:311  0:014  DDR speed 800MHz
3:311  0:000  Slot: 2 Type 19 2048MB 800MHz Vendor=G Skill Intl PartNo=F2-8500CL5-2GBPK SerialNo=0000000000000000
3:312  0:000  SPD[3]: Type 8 @0x53
3:326  0:014  DDR speed 800MHz
3:326  0:000  Slot: 3 Type 19 2048MB 800MHz Vendor=G Skill Intl PartNo=F2-8500CL5-2GBPK SerialNo=0000000000000000
3:327  0:000  === [ GetAcpiTablesList ] =================================
3:327  0:000  Get Acpi Tables List from RSDT:
3:327  0:000   - [00]: FACP  OEMFACP  len=132
3:327  0:000   - [01]: APIC  OEMAPIC  len=108
3:327  0:000   - [02]: MCFG  OEMMCFG  len=60
3:327  0:000   - [03]: OEMB  AMI_OEM  len=137
3:327  0:000   - [04]: HPET  OEMHPET  len=56
3:327  0:000   - [05]: OSFR  OEMOSFR  len=176
3:327  0:000   - [06]: SSDT  CpuPm len=2684
3:327  0:000  === [ GetUserSettings ] ===================================
3:327  0:000  USB FixOwnership: yes
3:327  0:000   - final DSDT Fix mask=00000000
3:327  0:000  EnableC4: yes
3:327  0:000  EnableC2: yes
3:327  0:000  C3Latency: 999
3:327  0:000  MinMultiplier: 6
3:327  0:000  MaxMultiplier: 8
3:327  0:000  ResetAddr: 0xCF9
3:327  0:000  Calc ResetVal: 0x6
3:327  0:000  ResetVal: 0x6
3:327  0:000  ChassisType: 0xD
3:327  0:000  FirmwareFeatures: 0xE907F537
3:327  0:000  PlatformFeature: 0x1
3:327  0:000  Converted CustomUUID 9EE73425-D509-4467-9581-91743221C88E
3:328  0:000  === [ ScanVolumes ] =======================================
3:328  0:000  Found 7 volumes with blockIO
3:328  0:000  - [00]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)
3:328  0:000          Result of bootcode detection: bootable unknown (legacy)
3:328  0:000  - [01]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)
3:328  0:000  - [02]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0x0,0x0)
3:328  0:000          Found optical drive
3:328  0:000  - [03]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,37CBC476-9882-4946-9EAA-1D98B743AA2C,0x28,0x64000)
3:329  0:000          Result of bootcode detection: bootable Clover (clover)
3:329  0:000          This is SelfVolume !!
3:329  0:000  - [04]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,99249595-DA06-4D03-8DCA-569D6021BD56,0x64028,0x1BD8A540)
3:330  0:000          Result of bootcode detection: bootable unknown (legacy)
3:330  0:000  - [05]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,FB5D9A09-8A39-4BC2-9DB5-8E95676BBFB5,0x1BDEE568,0x135F20)
3:330  0:000  - [06]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)\HD(1,MBR,0x58D76484,0x2,0x3A38602E)
3:330  0:000          Result of bootcode detection: bootable unknown (legacy)
3:330  0:000  Loading nvram.plist from Vol 'EFI' - loaded, size=2377
3:332  0:001  === [ PutNvramPlistToRtVars ] =============================
3:332  0:000   Adding Key: EFIBluetoothDelay: Size = 2, Data: B8 0B 
3:332  0:000   Adding Key: EFILoginHiDPI: Size = 4, Data: 00 00 00 00 
3:332  0:000   Adding Key: LocationServicesEnabled: Size = 1, Data: 01 
3:332  0:000   Adding Key: SystemAudioVolume: Size = 1, Data: 27 
3:332  0:000   Adding Key: SystemAudioVolumeDB: Size = 1, Data: 00 
3:332  0:000   Adding Key: bluetoothActiveControllerInfo: Size = 16, Data: 8D 82 AC 05 00 00 00 00 13 3A B4 18 D1 F3 43 12 
3:332  0:000   Adding Key: bluetoothInternalControllerInfo: Size = 14, Data: 8D 82 AC 05 00 00 13 3A B4 18 D1 F3 43 12 
3:332  0:000   Adding Key: bootercfg: Size = 2, Data: 28 00 
3:332  0:000   Adding Key: csr-active-config: Size = 4, Data: 03 00 00 00 
3:332  0:000   Adding Key: fakesmc-key-#KEY-ui32: Size = 4, Data: 00 00 00 18 
3:332  0:000   Adding Key: fakesmc-key-$Adr-ui32: Size = 4, Data: 00 00 03 00 
3:332  0:000   Adding Key: fakesmc-key-$Num-ui8: Size = 1, Data: 01 
3:332  0:000   Adding Key: fakesmc-key-BATP-flag: Size = 1, Data: 00 
3:332  0:000   Adding Key: fakesmc-key-BEMB-flag: Size = 1, Data: 00 
3:332  0:000   Adding Key: fakesmc-key-BNum-ui8: Size = 1, Data: 00 
3:332  0:000   Adding Key: fakesmc-key-CLKH-{clh: Size = 8, Data: 00 00 70 80 00 01 19 40 
3:332  0:000   Adding Key: fakesmc-key-CLKT-ui32: Size = 4, Data: 00 00 F6 7B 
3:332  0:000   Adding Key: fakesmc-key-EPCI-ui32: Size = 4, Data: 07 A0 07 00 
3:332  0:000   Adding Key: fakesmc-key-LSSS-ui16: Size = 2, Data: 02 00 
3:332  0:000   Adding Key: fakesmc-key-MSAc-ui16: Size = 2, Data: 00 00 
3:332  0:000   Adding Key: fakesmc-key-MSDW-ui8: Size = 1, Data: 01 
3:332  0:000   Adding Key: fakesmc-key-MSFW-ui8: Size = 2, Data: 01 00 
3:332  0:000   Adding Key: fakesmc-key-MSLD-ui8: Size = 1, Data: 00 
3:332  0:000   Adding Key: fakesmc-key-MSPS-ui16: Size = 2, Data: 00 03 
3:332  0:000   Adding Key: fakesmc-key-MSTc-ui8: Size = 1, Data: 00 
3:332  0:000   Adding Key: fakesmc-key-MSWr-ui8: Size = 1, Data: 00 
3:332  0:000   Adding Key: fakesmc-key-NATJ-ui8: Size = 1, Data: 02 
3:332  0:000   Adding Key: fakesmc-key-NATi-ui16: Size = 2, Data: 00 1E 
3:332  0:000   Adding Key: fakesmc-key-NTOK-ui8: Size = 1, Data: 01 
3:332  0:000   Adding Key: fakesmc-key-RBr -ch8*: Size = 8, Data: 6A 31 36 6A 31 37 00 00 
3:332  0:000   Adding Key: fakesmc-key-REV -ch8*: Size = 6, Data: 02 15 0F 00 00 07 
3:332  0:000   Adding Key: fakesmc-key-RMde-char: Size = 1, Data: 41 
3:332  0:000   Adding Key: fakesmc-key-RPlt-ch8*: Size = 8, Data: 6A 31 37 00 00 00 00 00 
3:332  0:000   Adding Key: flagstate: Size = 32, Data: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
3:332  0:000   Adding Key: fmm-computer-name: Size = 4, Data: 4B 32 53 4F 
3:332  0:000   Adding Key: prev-lang:kbd: Size = 4, Data: 66 72 3A 30 
3:332  0:000   Adding Key: security-mode: String: Size = 4, Val = 'none'
3:332  0:000  === [ InitTheme ] =========================================
3:333  0:000  Using theme 'bootcamp' (EFI\CLOVER\themes\bootcamp)
3:334  0:001  Loading font from ThemeDir: Success
3:334  0:000  Choosing theme bootcamp
3:334  0:000  after NVRAM boot-args=
3:334  0:000  === [ Dump SMC keys from NVRAM ] ==========================
3:334  0:000  found AppleSMC protocol
3:334  0:000  === [ ScanLoader ] ========================================
3:334  0:000  - [03]: 'EFI'
3:336  0:001  - [04]: 'Macintosh SSD'
3:337  0:001          AddLoaderEntry for Volume Name=Macintosh SSD
3:339  0:002      hibernated: set as never
3:345  0:005  - [05]: 'Recovery HD'
3:345  0:000          AddLoaderEntry for Volume Name=Recovery HD
3:346  0:001  === [ AddCustomTool ] =====================================
3:347  0:000  === [ GetEfiBootDeviceFromNvram ] =========================
3:347  0:000   - found entry 0. 'Boot macOS from Macintosh SSD', Volume 'Macintosh SSD', DevicePath 'PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,99249595-DA06-4D03-8DCA-569D6021BD56,0x64028,0x1BD8A540)\System\Library\CoreServices\boot.efii'
3:347  0:000  DefaultIndex=0 and MainMenu.EntryCount=6
3:467  0:120  GUI ready
34:066  30:598  ParseBootOption: invalid input params
34:066  0:000  BootVariable of the entry is empty
34:066  0:000  === [ StartLoader ] =======================================
34:066  0:000  Finally: Bus=400000kHz CPU=3200MHz
34:066  0:000  QPI: disable table132
34:066  0:000  Loading boot.efi  status=Success
34:113  0:047  GetOSVersion: 10.12.5 (16F73)
34:113  0:000  CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS
34:113  0:000  Filtering KextPatches:
34:113  0:000   - [00]: IOAHCIBlockStorage (activation TRIM) :: BinPatch :: [OS: 10.12.5 | MatchOS: All | MatchBuild: All] ==> allowed
34:113  0:000   - [01]: AppleHDA (AD2000B dans AppleHDA) :: BinPatch :: [OS: 10.12.5 | MatchOS: All | MatchBuild: All] ==> allowed
34:113  0:000   - [02]: AppleHDA (suppression logs AppleHDA) :: BinPatch :: [OS: 10.12.5 | MatchOS: All | MatchBuild: All] ==> allowed
34:113  0:000  === [ PatchSmbios ] =======================================
34:113  0:000  ExternalClock: 400 MHz
34:113  0:000  insert table 9 for dev 0:0
34:113  0:000  insert table 9 for dev 0:1
34:113  0:000  insert table 9 for dev 0:0
34:113  0:000  insert table 9 for dev 0:0
34:113  0:000  insert table 9 for dev 3:0
34:114  0:000  Trusting SMBIOS...
34:114  0:000  Channels: 2
34:114  0:000  Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23
34:114  0:000   partNum=ModulePartNumber00
34:114  0:000  SMBIOS Type 17 Index = 0 => 0 0:
34:114  0:000  BANK 0 DIMM0 1066MHz 2048MB
34:114  0:000   partNum=ModulePartNumber02
34:114  0:000  SMBIOS Type 17 Index = 1 => 2 2:
34:114  0:000  BANK 1 DIMM0 1066MHz 2048MB
34:114  0:000   partNum=ModulePartNumber01
34:114  0:000  SMBIOS Type 17 Index = 2 => 1 1:
34:114  0:000  BANK 0 DIMM1 1066MHz 2048MB
34:114  0:000   partNum=ModulePartNumber03
34:114  0:000  SMBIOS Type 17 Index = 3 => 3 3:
34:114  0:000  BANK 1 DIMM1 1066MHz 2048MB
34:114  0:000  mTotalSystemMemory = 8192
34:114  0:000  NumberOfMemoryDevices = 4
34:114  0:000  Type20[0]->End = 0x1FFFFF, Type17[0] = 0x800
34:114  0:000  Type20[1]->End = 0x40FFFF, Type17[2] = 0x2000
34:114  0:000  Type20[2]->End = 0x40FFFF, Type17[3] = 0x4000
34:114  0:000  Disabled SetTable132
34:114  0:000  === [ PatchACPI ] =========================================
34:114  0:000  RSDT 0xDFF70000
34:114  0:000  FADT from RSDT: 0xDFF70200
34:114  0:000  XSDT 0xDFF70100
34:114  0:000  FADT from XSDT: 0xDFF70290
34:114  0:000  Xsdt reallocation done
34:114  0:000  old FADT length=F4
34:114  0:000  DSDT found in Clover volume OEM folder: EFI\CLOVER\ACPI\patched\DSDT.aml
34:115  0:001  Apply DsdtFixMask=0x00000000
34:115  0:000     drop _DSM mask=0x0000
34:115  0:000  === [ FixBiosDsdt ] =======================================
34:115  0:000  VideoCard devID=0x128410DE
34:115  0:000  DisplayADR1[0] = 0x10000, DisplayADR2[0] = 0x0
34:115  0:000  USBADR[0] = 0x1A0000 and PCIe = 0xFFFE
34:115  0:000  USBADR[1] = 0x1A0001 and PCIe = 0xFFFE
34:115  0:000  USBADR[2] = 0x1A0002 and PCIe = 0xFFFE
34:115  0:000  USBADR[3] = 0x1A0007 and PCIe = 0xFFFE
34:115  0:000  Found Airport BCM at 0x1C0000, 0x0
34:115  0:000  USBADR[4] = 0x1C0002 and PCIe = 0x0
34:115  0:000  USBADR[5] = 0x1D0000 and PCIe = 0xFFFE
34:115  0:000  USBADR[6] = 0x1D0001 and PCIe = 0xFFFE
34:116  0:000  USBADR[7] = 0x1D0002 and PCIe = 0xFFFE
34:116  0:000  USBADR[8] = 0x1D0007 and PCIe = 0xFFFE
34:116  0:000  first CPU found at 2A offset 2D
34:116  0:000  score candidate at 26
34:116  0:000  score inserted in acpi_cpu_score _PR_
34:116  0:000  Found ACPI CPU: CPU0 | CPU1 | CPU2 | CPU3 , within the score: _PR_
34:116  0:000  Found PCIROOTUID = 0
34:116  0:000  === [ ACPIDropTables ] ====================================
34:116  0:000  === [ DropSSDT ] ==========================================
34:116  0:000  Drop tables from Xsdt, SIGN=SSDT TableID= Length=0
34:116  0:000   Xsdt has tables count=7
34:116  0:000   Table: SSDT  CpuPm  2684 dropped
34:116  0:000  CPUBase=0 and ApicCPUBase=1 ApicCPUNum=4
34:116  0:000  Initial control=0x600081F
34:116  0:000  Maximum control=0x81F
34:116  0:000  UnderVoltStep=0
34:116  0:000  PLimitDict=0
34:116  0:000  PStates count=5
34:116  0:000  SSDT with CPU P-States generated successfully
34:116  0:000  SSDT with CPU C-States generated successfully
34:116  0:000  === [ RestSetup macOS ] ===================================
34:116  0:000  EdidDiscovered size=128
34:116  0:000  ------- EDID Table
34:116  0:000  000  |  00  FF  FF  FF  FF  FF  FF  00  4C  2D
34:116  0:000  010  |  7F  02  32  32  45  4D  06  11  01  03
34:116  0:000  020  |  80  2F  1E  78  2A  D5  15  A4  55  49
34:116  0:000  030  |  9A  27  14  50  54  BF  EF  80  B3  00
34:116  0:000  040  |  81  80  81  40  71  4F  01  01  01  01
34:116  0:000  050  |  01  01  01  01  7C  2E  90  A0  60  1A
34:116  0:000  060  |  1E  40  30  20  36  00  DA  28  11  00
34:116  0:000  070  |  00  1A  00  00  00  FD  00  38  4B  1E
34:116  0:000  080  |  51  0E  00  0A  20  20  20  20  20  20
34:116  0:000  090  |  00  00  00  FC  00  53  79  6E  63  4D
34:116  0:000  100  |  61  73  74  65  72  0A  20  20  00  00
34:116  0:000  110  |  00  FF  00  48  53  41  50  32  30  31
34:116  0:000  120  |  35  35  34  0A  20  20  00  5B
34:116  0:000  NVidia GFX injection not set
34:116  0:000  stringlength = 3450
34:116  0:000  CurrentMode: Width=1680 Height=1050
34:116  0:000  Beginning FSInjection
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: DE441A98
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: DE441A98
34:117  0:000  Use origin smbios table type 1 guid.
34:118  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
34:118  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.12
34:118  0:000    Extra kext: EFI\CLOVER\kexts\10.12\FakeSMC.kext
34:123  0:004      Extra PlugIn kext: EFI\CLOVER\kexts\10.12\FakeSMC.kext\Contents\PlugIns\HWInfo.kext
34:124  0:001      Extra PlugIn kext: EFI\CLOVER\kexts\10.12\FakeSMC.kext\Contents\PlugIns\IntelCPUMonitor.kext
34:125  0:001      Extra PlugIn kext: EFI\CLOVER\kexts\10.12\FakeSMC.kext\Contents\PlugIns\W836x.kext
34:128  0:003    Extra kext: EFI\CLOVER\kexts\10.12\Marvell88E8056.kext
34:130  0:001  Custom boot is disabled
34:130  0:000  Closing log
 

 
It shows good value for me (Q9400 @ 3,2GHz, FSB QDR=1,6GHz).
thank you :thumbsup_anim: .

Link to comment
Share on other sites

Here it is

0:100  0:100  MemLog inited, TSC freq: 3199885610
0:100  0:000  LegacyRegion2: Chipset/proc: 0x2E208086
0:100  0:000   Intel Series 4 and similar (PAM 0x90-0x96)
0:100  0:000   Test PAM1=(0x41=90, 0x5a=00, 0x81=00, 0x91=11) at chipset 2E208086
0:100  0:000  , Install = Success
0:109  0:009  BiosVideoDriverBindingStart!
0:109  0:000  BiosVideoCheckForVbe
0:109  0:000  EdidOverride not found
0:170  0:060   Edid1-
0:190  0:020   Edid0+
0:190  0:000   found Detail Timing 1680x1050
0:235  0:044     0 640x480 attr=3BF - ok, edid+, 640x480, working, highest, pref=0
0:236  0:001     1 800x600 attr=3BF - ok, edid+, 800x600, working, highest, pref=1
0:238  0:001     2 1024x768 attr=3BF - ok, edid+, 1024x768, working, highest, pref=2
0:240  0:001     3 1280x1024 attr=3BF - ok, edid+, working, highest, pref=3
0:249  0:009     4 1680x1050 attr=3BF - ok, edid+, working, highest, pref=4
0:251  0:001     5 1280x800 attr=3BF - ok, edid-
0:251  0:000  BV new mode: 4 1680x1050
0:538  0:287   SetMode pref 4 (4) = Success
3:105  2:567  
3:105  0:000  Now is 30.6.2017,  16:0:13 (GMT)
3:105  0:000  Starting Clover revision: 4099 on CLOVER EFI
3:105  0:000  Build with: [Args: -mc --no-usb -D NO_GRUB_DRIVERS_EMBEDDED -D CHECK_FLAGS -t XCODE8 | -D DISABLE_USB_SUPPORT -D NO_GRUB_DRIVERS_EMBEDDED -D CHECK_FLAGS -D USE_BIOS_BLOCKIO -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE8 -n 5 | OS: 10.12.6 | XCODE: 8.3.3]
3:105  0:000  SelfDevicePath=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,37CBC476-9882-4946-9EAA-1D98B743AA2C,0x28,0x64000) @DE441D98
3:105  0:000  SelfDirPath = \EFI\CLOVER
3:105  0:000  === [ Get Smbios ] ========================================
3:105  0:000  Type 16 Index = 0
3:105  0:000  Total Memory Slots Count = 4
3:105  0:000  Type 17 Index = 0
3:105  0:000  SmbiosTable.Type17->Speed = 1066MHz
3:105  0:000  SmbiosTable.Type17->Size = 2048MB
3:105  0:000  SmbiosTable.Type17->Bank/Device = BANK0 DIMM0
3:105  0:000  SmbiosTable.Type17->Vendor = Manufacturer00
3:105  0:000  SmbiosTable.Type17->SerialNumber = SerNum00
3:105  0:000  SmbiosTable.Type17->PartNumber = ModulePartNumber00
3:105  0:000  Type 17 Index = 1
3:105  0:000  SmbiosTable.Type17->Speed = 1066MHz
3:105  0:000  SmbiosTable.Type17->Size = 2048MB
3:105  0:000  SmbiosTable.Type17->Bank/Device = BANK1 DIMM1
3:105  0:000  SmbiosTable.Type17->Vendor = Manufacturer01
3:105  0:000  SmbiosTable.Type17->SerialNumber = SerNum01
3:105  0:000  SmbiosTable.Type17->PartNumber = ModulePartNumber01
3:105  0:000  Type 17 Index = 2
3:105  0:000  SmbiosTable.Type17->Speed = 1066MHz
3:105  0:000  SmbiosTable.Type17->Size = 2048MB
3:105  0:000  SmbiosTable.Type17->Bank/Device = BANK2 DIMM2
3:105  0:000  SmbiosTable.Type17->Vendor = Manufacturer02
3:105  0:000  SmbiosTable.Type17->SerialNumber = SerNum02
3:105  0:000  SmbiosTable.Type17->PartNumber = ModulePartNumber02
3:105  0:000  Type 17 Index = 3
3:105  0:000  SmbiosTable.Type17->Speed = 1066MHz
3:105  0:000  SmbiosTable.Type17->Size = 2048MB
3:105  0:000  SmbiosTable.Type17->Bank/Device = BANK3 DIMM3
3:105  0:000  SmbiosTable.Type17->Vendor = Manufacturer03
3:105  0:000  SmbiosTable.Type17->SerialNumber = SerNum03
3:105  0:000  SmbiosTable.Type17->PartNumber = ModulePartNumber03
3:105  0:000  Boot status=0
3:105  0:000  Running on: 'System Product Name' with board 'P5Q DELUXE'
3:105  0:000  === [ GetCPUProperties ] ==================================
3:105  0:000  CPU Vendor = 756E6547 Model=1067A
3:105  0:000   The CPU supported SSE4.1
3:105  0:000  got cores from CPUID_1 = 4
3:105  0:000  The CPU not supported turbo
3:105  0:000  BrandString = Intel(R) Core(TM)2 Quad CPU    Q9400  @ 2.66GHz
3:105  0:000   Calibrated TSCFrequency =3199885610 =3199MHz
3:105  0:000  MSR dumps:
3:105  0:000  	@0x00CD=80000A04
3:105  0:000  	@0x0198=616081F0600081F
3:105  0:000  QPI(1)ExternalClock: 400 MHz
3:105  0:000  Take FSB: 475000 kHz
3:105  0:000  FSBFrequency = 475 MHz, DMI FSBFrequency = 400 MHz, 
3:105  0:000  (2)FSBFrequency : 400 MHz
3:105  0:000  Corrected FSBFrequency = 400 MHz
3:105  0:000  PIS(1): 1600 MHz
3:105  0:000  MaxSpeed(1): 3200 MHz
3:105  0:000  MaxDiv/MinDiv: 8.0/6
3:105  0:000  Turbo: 9/0/0/0
3:105  0:000  Features: 0xBFEBFBFF
3:105  0:000  Threads: 4
3:105  0:000  Cores: 4
3:105  0:000  FSB: 400 MHz
3:105  0:000  CPU: 3800 MHz
3:105  0:000  TSC: 3800 MHz
3:105  0:000  PIS: 1600 MHz
3:105  0:000  ExternalClock: 400 MHz
3:105  0:000  === [ GetDevices ] ========================================
3:105  0:000  PCI (00|00:00.00) : 8086 2E20 class=060000
3:105  0:000  PCI (00|00:01.00) : 8086 2E21 class=060400
3:105  0:000  PCI (00|01:00.00) : 10DE 1284 class=030000
3:105  0:000   - GFX: Model=Asus GeForce GT 630 family 108 (Nvidia)
3:105  0:000  PCI (00|01:00.01) : 10DE 0E0F class=040300
3:105  0:000   - HDMI Audio: 
3:105  0:000  PCI (00|00:1A.00) : 8086 3A37 class=0C0300
3:105  0:000  PCI (00|00:1A.01) : 8086 3A38 class=0C0300
3:105  0:000  PCI (00|00:1A.02) : 8086 3A39 class=0C0300
3:105  0:000  PCI (00|00:1A.07) : 8086 3A3C class=0C0320
3:105  0:000  PCI (00|00:1B.00) : 8086 3A3E class=040300
3:105  0:000  PCI (00|00:1C.00) : 8086 3A40 class=060400
3:105  0:000  PCI (00|04:00.00) : 14E4 43A0 class=028000
3:105  0:000   - WIFI: Vendor=Broadcom
3:105  0:000  PCI (00|00:1C.02) : 8086 3A44 class=060400
3:105  0:000  PCI (00|03:00.00) : 1B73 1100 class=0C0330
3:105  0:000  PCI (00|00:1C.05) : 8086 3A4A class=060400
3:105  0:000  PCI (00|02:00.00) : 11AB 4364 class=020000
3:105  0:000   - LAN: 0 Vendor=Marvell
3:105  0:000  PCI (00|00:1D.00) : 8086 3A34 class=0C0300
3:106  0:000  PCI (00|00:1D.01) : 8086 3A35 class=0C0300
3:106  0:000  PCI (00|00:1D.02) : 8086 3A36 class=0C0300
3:106  0:000  PCI (00|00:1D.07) : 8086 3A3A class=0C0320
3:106  0:000  PCI (00|00:1E.00) : 8086 244E class=060401
3:106  0:000  PCI (00|05:03.00) : 11C1 5811 class=0C0010
3:106  0:000  PCI (00|00:1F.00) : 8086 3A16 class=060100
3:106  0:000  PCI (00|00:1F.02) : 8086 3A22 class=010601
3:106  0:000  PCI (00|00:1F.03) : 8086 3A30 class=0C0500
3:106  0:000  === [ GetDefaultSettings ] ================================
3:106  0:000  Clover load options size = 0 bytes
3:108  0:002  EFI\CLOVER\config.plist loaded: Success
3:108  0:000  === [ GetListOfThemes ] ===================================
3:108  0:000  - [00]: embedded
3:110  0:001  - [00]: random
3:110  0:000  - [00]: bootcamp
3:113  0:003  === [ Found config plists ] ===============================
3:113  0:000  - config.plist
3:114  0:000  === [ GetEarlyUserSettings ] ==============================
3:114  0:000  timeout set to 5
3:114  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
3:114  0:000  KextsToPatch: 3 requested
3:114  0:000   - [00]: IOAHCIBlockStorage (activation TRIM) :: BinPatch :: data len: 11
3:114  0:000   - [01]: AppleHDA (AD2000B dans AppleHDA) :: BinPatch :: data len: 4
3:114  0:000   - [02]: AppleHDA (suppression logs AppleHDA) :: BinPatch :: data len: 16
3:114  0:000  Default theme: bootcamp
3:114  0:000  === [ LoadDrivers ] =======================================
3:115  0:000  Loading AppleImageCodec-64.efi  status=Success
3:116  0:000  Loading AppleKeyAggregator-64.efi  status=Success
3:116  0:000  Loading AppleUITheme-64.efi  status=Success
3:116  0:000  Loading FirmwareVolume-64.efi  status=Success
3:116  0:000  Loading FSInject-64.efi  status=Success
3:116  0:000  Loading SMCHelper-64.efi  status=Success
3:116  0:000  Loading HFSPlus-64.efi  status=Success
3:117  0:001   - driver needs connecting
3:117  0:000  Loading XhciDxe-64.efi  status=Success
3:118  0:000   - driver needs connecting
3:118  0:000  2 drivers needs connecting ...
3:118  0:000  PlatformDriverOverrideProtocol->GetDriver overriden
3:118  0:000  HFS+ driver loaded
3:127  0:009  PciIo started
3:127  0:000  HcDevicePath found
3:127  0:000  attribute saved=700
3:127  0:000  attribute supports=8700 Status=Success
3:127  0:000  device enable status=Success
3:127  0:000  Create USB2HC
3:127  0:000  will not apply workaround to test, N=8
3:127  0:000  Xhc HCI version=0
3:127  0:000  PageSize = 1
3:127  0:000  XhcCreateUsb3Hc: Capability length 0x80
3:127  0:000  XhcCreateUsb3Hc: ExtCapRegBase 0x8000
3:127  0:000  XhcCreateUsb3Hc: HcSParams1 0x8000820
3:127  0:000  XhcCreateUsb3Hc: HcSParams2 0xFC000054
3:127  0:000  XhcCreateUsb3Hc: HcCParams 0x200071E1
3:127  0:000  XhcCreateUsb3Hc: DBOff 0x3000
3:127  0:000  XhcCreateUsb3Hc: RTSOff 0x2000
3:127  0:000  XhcCreateUsb3Hc: UsbLegSupOffset 0x330
3:127  0:000  XhcCreateUsb3Hc: DebugCapSupOffset 0x340
3:127  0:000  XhcIntelQuirks
3:127  0:000  XhcResetHC
3:129  0:002  Initialize the schedule
3:129  0:000  Start the Host Controller
3:129  0:000  XhcDriverBindingStart: XHCI started for controller @ DF4DF318
3:228  0:098  XhcReset: status Success
3:228  0:000  XhcGetState: current state 0
3:228  0:000  XhcSetState: status Success
3:228  0:000  XhcGetCapability: 8 ports, 64 bit capable=1
3:266  0:037  === [ InitScreen ] ========================================
3:266  0:000  Console modes reported: 4, available modes:
3:266  0:000   - [01]: 80x25
3:266  0:000   - [02]: 80x50
3:266  0:000   - [03]: 100x31
3:266  0:000   - [04]: 210x55 (current mode)
3:266  0:000  SetScreenResolution: 1680x1050 - already set
3:266  0:000  reinit: self device path=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,37CBC476-9882-4946-9EAA-1D98B743AA2C,0x28,0x64000)
3:266  0:000  === [ GetMacAddress ] =====================================
3:266  0:000  === [ ScanSPD ] ===========================================
3:266  0:000  SMBus device : 8086 3A30 class=0C0500 status=Success
3:266  0:000  SMBus CmdReg: 0x3
3:266  0:000  Scanning SMBus [8086:3A30], mmio: 0xFCFFF404, ioport: 0x400, hostc: 0x1
3:266  0:000  Slots to scan [8]...
3:266  0:000  SPD[0]: Type 8 @0x50
3:281  0:014  DDR speed 800MHz
3:281  0:000  Slot: 0 Type 19 2048MB 800MHz Vendor=G Skill Intl PartNo=F2-8500CL5-2GBPK SerialNo=0000000000000000
3:282  0:000  SPD[1]: Type 8 @0x51
3:296  0:014  DDR speed 800MHz
3:296  0:000  Slot: 1 Type 19 2048MB 800MHz Vendor=G Skill Intl PartNo=F2-8500CL5-2GBPK SerialNo=0000000000000000
3:297  0:000  SPD[2]: Type 8 @0x52
3:311  0:014  DDR speed 800MHz
3:311  0:000  Slot: 2 Type 19 2048MB 800MHz Vendor=G Skill Intl PartNo=F2-8500CL5-2GBPK SerialNo=0000000000000000
3:312  0:000  SPD[3]: Type 8 @0x53
3:326  0:014  DDR speed 800MHz
3:326  0:000  Slot: 3 Type 19 2048MB 800MHz Vendor=G Skill Intl PartNo=F2-8500CL5-2GBPK SerialNo=0000000000000000
3:327  0:000  === [ GetAcpiTablesList ] =================================
3:327  0:000  Get Acpi Tables List from RSDT:
3:327  0:000   - [00]: FACP  OEMFACP  len=132
3:327  0:000   - [01]: APIC  OEMAPIC  len=108
3:327  0:000   - [02]: MCFG  OEMMCFG  len=60
3:327  0:000   - [03]: OEMB  AMI_OEM  len=137
3:327  0:000   - [04]: HPET  OEMHPET  len=56
3:327  0:000   - [05]: OSFR  OEMOSFR  len=176
3:327  0:000   - [06]: SSDT  CpuPm len=2684
3:327  0:000  === [ GetUserSettings ] ===================================
3:327  0:000  USB FixOwnership: yes
3:327  0:000   - final DSDT Fix mask=00000000
3:327  0:000  EnableC4: yes
3:327  0:000  EnableC2: yes
3:327  0:000  C3Latency: 999
3:327  0:000  MinMultiplier: 6
3:327  0:000  MaxMultiplier: 8
3:327  0:000  ResetAddr: 0xCF9
3:327  0:000  Calc ResetVal: 0x6
3:327  0:000  ResetVal: 0x6
3:327  0:000  ChassisType: 0xD
3:327  0:000  FirmwareFeatures: 0xE907F537
3:327  0:000  PlatformFeature: 0x1
3:327  0:000  Converted CustomUUID 9EE73425-D509-4467-9581-91743221C88E
3:328  0:000  === [ ScanVolumes ] =======================================
3:328  0:000  Found 7 volumes with blockIO
3:328  0:000  - [00]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)
3:328  0:000          Result of bootcode detection: bootable unknown (legacy)
3:328  0:000  - [01]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)
3:328  0:000  - [02]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0x0,0x0)
3:328  0:000          Found optical drive
3:328  0:000  - [03]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,37CBC476-9882-4946-9EAA-1D98B743AA2C,0x28,0x64000)
3:329  0:000          Result of bootcode detection: bootable Clover (clover)
3:329  0:000          This is SelfVolume !!
3:329  0:000  - [04]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,99249595-DA06-4D03-8DCA-569D6021BD56,0x64028,0x1BD8A540)
3:330  0:000          Result of bootcode detection: bootable unknown (legacy)
3:330  0:000  - [05]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,FB5D9A09-8A39-4BC2-9DB5-8E95676BBFB5,0x1BDEE568,0x135F20)
3:330  0:000  - [06]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)\HD(1,MBR,0x58D76484,0x2,0x3A38602E)
3:330  0:000          Result of bootcode detection: bootable unknown (legacy)
3:330  0:000  Loading nvram.plist from Vol 'EFI' - loaded, size=2377
3:332  0:001  === [ PutNvramPlistToRtVars ] =============================
3:332  0:000   Adding Key: EFIBluetoothDelay: Size = 2, Data: B8 0B 
3:332  0:000   Adding Key: EFILoginHiDPI: Size = 4, Data: 00 00 00 00 
3:332  0:000   Adding Key: LocationServicesEnabled: Size = 1, Data: 01 
3:332  0:000   Adding Key: SystemAudioVolume: Size = 1, Data: 27 
3:332  0:000   Adding Key: SystemAudioVolumeDB: Size = 1, Data: 00 
3:332  0:000   Adding Key: bluetoothActiveControllerInfo: Size = 16, Data: 8D 82 AC 05 00 00 00 00 13 3A B4 18 D1 F3 43 12 
3:332  0:000   Adding Key: bluetoothInternalControllerInfo: Size = 14, Data: 8D 82 AC 05 00 00 13 3A B4 18 D1 F3 43 12 
3:332  0:000   Adding Key: bootercfg: Size = 2, Data: 28 00 
3:332  0:000   Adding Key: csr-active-config: Size = 4, Data: 03 00 00 00 
3:332  0:000   Adding Key: fakesmc-key-#KEY-ui32: Size = 4, Data: 00 00 00 18 
3:332  0:000   Adding Key: fakesmc-key-$Adr-ui32: Size = 4, Data: 00 00 03 00 
3:332  0:000   Adding Key: fakesmc-key-$Num-ui8: Size = 1, Data: 01 
3:332  0:000   Adding Key: fakesmc-key-BATP-flag: Size = 1, Data: 00 
3:332  0:000   Adding Key: fakesmc-key-BEMB-flag: Size = 1, Data: 00 
3:332  0:000   Adding Key: fakesmc-key-BNum-ui8: Size = 1, Data: 00 
3:332  0:000   Adding Key: fakesmc-key-CLKH-{clh: Size = 8, Data: 00 00 70 80 00 01 19 40 
3:332  0:000   Adding Key: fakesmc-key-CLKT-ui32: Size = 4, Data: 00 00 F6 7B 
3:332  0:000   Adding Key: fakesmc-key-EPCI-ui32: Size = 4, Data: 07 A0 07 00 
3:332  0:000   Adding Key: fakesmc-key-LSSS-ui16: Size = 2, Data: 02 00 
3:332  0:000   Adding Key: fakesmc-key-MSAc-ui16: Size = 2, Data: 00 00 
3:332  0:000   Adding Key: fakesmc-key-MSDW-ui8: Size = 1, Data: 01 
3:332  0:000   Adding Key: fakesmc-key-MSFW-ui8: Size = 2, Data: 01 00 
3:332  0:000   Adding Key: fakesmc-key-MSLD-ui8: Size = 1, Data: 00 
3:332  0:000   Adding Key: fakesmc-key-MSPS-ui16: Size = 2, Data: 00 03 
3:332  0:000   Adding Key: fakesmc-key-MSTc-ui8: Size = 1, Data: 00 
3:332  0:000   Adding Key: fakesmc-key-MSWr-ui8: Size = 1, Data: 00 
3:332  0:000   Adding Key: fakesmc-key-NATJ-ui8: Size = 1, Data: 02 
3:332  0:000   Adding Key: fakesmc-key-NATi-ui16: Size = 2, Data: 00 1E 
3:332  0:000   Adding Key: fakesmc-key-NTOK-ui8: Size = 1, Data: 01 
3:332  0:000   Adding Key: fakesmc-key-RBr -ch8*: Size = 8, Data: 6A 31 36 6A 31 37 00 00 
3:332  0:000   Adding Key: fakesmc-key-REV -ch8*: Size = 6, Data: 02 15 0F 00 00 07 
3:332  0:000   Adding Key: fakesmc-key-RMde-char: Size = 1, Data: 41 
3:332  0:000   Adding Key: fakesmc-key-RPlt-ch8*: Size = 8, Data: 6A 31 37 00 00 00 00 00 
3:332  0:000   Adding Key: flagstate: Size = 32, Data: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
3:332  0:000   Adding Key: fmm-computer-name: Size = 4, Data: 4B 32 53 4F 
3:332  0:000   Adding Key: prev-lang:kbd: Size = 4, Data: 66 72 3A 30 
3:332  0:000   Adding Key: security-mode: String: Size = 4, Val = 'none'
3:332  0:000  === [ InitTheme ] =========================================
3:333  0:000  Using theme 'bootcamp' (EFI\CLOVER\themes\bootcamp)
3:334  0:001  Loading font from ThemeDir: Success
3:334  0:000  Choosing theme bootcamp
3:334  0:000  after NVRAM boot-args=
3:334  0:000  === [ Dump SMC keys from NVRAM ] ==========================
3:334  0:000  found AppleSMC protocol
3:334  0:000  === [ ScanLoader ] ========================================
3:334  0:000  - [03]: 'EFI'
3:336  0:001  - [04]: 'Macintosh SSD'
3:337  0:001          AddLoaderEntry for Volume Name=Macintosh SSD
3:339  0:002      hibernated: set as never
3:345  0:005  - [05]: 'Recovery HD'
3:345  0:000          AddLoaderEntry for Volume Name=Recovery HD
3:346  0:001  === [ AddCustomTool ] =====================================
3:347  0:000  === [ GetEfiBootDeviceFromNvram ] =========================
3:347  0:000   - found entry 0. 'Boot macOS from Macintosh SSD', Volume 'Macintosh SSD', DevicePath 'PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,99249595-DA06-4D03-8DCA-569D6021BD56,0x64028,0x1BD8A540)\System\Library\CoreServices\boot.efii'
3:347  0:000  DefaultIndex=0 and MainMenu.EntryCount=6
3:467  0:120  GUI ready
34:066  30:598  ParseBootOption: invalid input params
34:066  0:000  BootVariable of the entry is empty
34:066  0:000  === [ StartLoader ] =======================================
34:066  0:000  Finally: Bus=400000kHz CPU=3200MHz
34:066  0:000  QPI: disable table132
34:066  0:000  Loading boot.efi  status=Success
34:113  0:047  GetOSVersion: 10.12.5 (16F73)
34:113  0:000  CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS
34:113  0:000  Filtering KextPatches:
34:113  0:000   - [00]: IOAHCIBlockStorage (activation TRIM) :: BinPatch :: [OS: 10.12.5 | MatchOS: All | MatchBuild: All] ==> allowed
34:113  0:000   - [01]: AppleHDA (AD2000B dans AppleHDA) :: BinPatch :: [OS: 10.12.5 | MatchOS: All | MatchBuild: All] ==> allowed
34:113  0:000   - [02]: AppleHDA (suppression logs AppleHDA) :: BinPatch :: [OS: 10.12.5 | MatchOS: All | MatchBuild: All] ==> allowed
34:113  0:000  === [ PatchSmbios ] =======================================
34:113  0:000  ExternalClock: 400 MHz
34:113  0:000  insert table 9 for dev 0:0
34:113  0:000  insert table 9 for dev 0:1
34:113  0:000  insert table 9 for dev 0:0
34:113  0:000  insert table 9 for dev 0:0
34:113  0:000  insert table 9 for dev 3:0
34:114  0:000  Trusting SMBIOS...
34:114  0:000  Channels: 2
34:114  0:000  Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23
34:114  0:000   partNum=ModulePartNumber00
34:114  0:000  SMBIOS Type 17 Index = 0 => 0 0:
34:114  0:000  BANK 0 DIMM0 1066MHz 2048MB
34:114  0:000   partNum=ModulePartNumber02
34:114  0:000  SMBIOS Type 17 Index = 1 => 2 2:
34:114  0:000  BANK 1 DIMM0 1066MHz 2048MB
34:114  0:000   partNum=ModulePartNumber01
34:114  0:000  SMBIOS Type 17 Index = 2 => 1 1:
34:114  0:000  BANK 0 DIMM1 1066MHz 2048MB
34:114  0:000   partNum=ModulePartNumber03
34:114  0:000  SMBIOS Type 17 Index = 3 => 3 3:
34:114  0:000  BANK 1 DIMM1 1066MHz 2048MB
34:114  0:000  mTotalSystemMemory = 8192
34:114  0:000  NumberOfMemoryDevices = 4
34:114  0:000  Type20[0]->End = 0x1FFFFF, Type17[0] = 0x800
34:114  0:000  Type20[1]->End = 0x40FFFF, Type17[2] = 0x2000
34:114  0:000  Type20[2]->End = 0x40FFFF, Type17[3] = 0x4000
34:114  0:000  Disabled SetTable132
34:114  0:000  === [ PatchACPI ] =========================================
34:114  0:000  RSDT 0xDFF70000
34:114  0:000  FADT from RSDT: 0xDFF70200
34:114  0:000  XSDT 0xDFF70100
34:114  0:000  FADT from XSDT: 0xDFF70290
34:114  0:000  Xsdt reallocation done
34:114  0:000  old FADT length=F4
34:114  0:000  DSDT found in Clover volume OEM folder: EFI\CLOVER\ACPI\patched\DSDT.aml
34:115  0:001  Apply DsdtFixMask=0x00000000
34:115  0:000     drop _DSM mask=0x0000
34:115  0:000  === [ FixBiosDsdt ] =======================================
34:115  0:000  VideoCard devID=0x128410DE
34:115  0:000  DisplayADR1[0] = 0x10000, DisplayADR2[0] = 0x0
34:115  0:000  USBADR[0] = 0x1A0000 and PCIe = 0xFFFE
34:115  0:000  USBADR[1] = 0x1A0001 and PCIe = 0xFFFE
34:115  0:000  USBADR[2] = 0x1A0002 and PCIe = 0xFFFE
34:115  0:000  USBADR[3] = 0x1A0007 and PCIe = 0xFFFE
34:115  0:000  Found Airport BCM at 0x1C0000, 0x0
34:115  0:000  USBADR[4] = 0x1C0002 and PCIe = 0x0
34:115  0:000  USBADR[5] = 0x1D0000 and PCIe = 0xFFFE
34:115  0:000  USBADR[6] = 0x1D0001 and PCIe = 0xFFFE
34:116  0:000  USBADR[7] = 0x1D0002 and PCIe = 0xFFFE
34:116  0:000  USBADR[8] = 0x1D0007 and PCIe = 0xFFFE
34:116  0:000  first CPU found at 2A offset 2D
34:116  0:000  score candidate at 26
34:116  0:000  score inserted in acpi_cpu_score _PR_
34:116  0:000  Found ACPI CPU: CPU0 | CPU1 | CPU2 | CPU3 , within the score: _PR_
34:116  0:000  Found PCIROOTUID = 0
34:116  0:000  === [ ACPIDropTables ] ====================================
34:116  0:000  === [ DropSSDT ] ==========================================
34:116  0:000  Drop tables from Xsdt, SIGN=SSDT TableID= Length=0
34:116  0:000   Xsdt has tables count=7
34:116  0:000   Table: SSDT  CpuPm  2684 dropped
34:116  0:000  CPUBase=0 and ApicCPUBase=1 ApicCPUNum=4
34:116  0:000  Initial control=0x600081F
34:116  0:000  Maximum control=0x81F
34:116  0:000  UnderVoltStep=0
34:116  0:000  PLimitDict=0
34:116  0:000  PStates count=5
34:116  0:000  SSDT with CPU P-States generated successfully
34:116  0:000  SSDT with CPU C-States generated successfully
34:116  0:000  === [ RestSetup macOS ] ===================================
34:116  0:000  EdidDiscovered size=128
34:116  0:000  ------- EDID Table
34:116  0:000  000  |  00  FF  FF  FF  FF  FF  FF  00  4C  2D
34:116  0:000  010  |  7F  02  32  32  45  4D  06  11  01  03
34:116  0:000  020  |  80  2F  1E  78  2A  D5  15  A4  55  49
34:116  0:000  030  |  9A  27  14  50  54  BF  EF  80  B3  00
34:116  0:000  040  |  81  80  81  40  71  4F  01  01  01  01
34:116  0:000  050  |  01  01  01  01  7C  2E  90  A0  60  1A
34:116  0:000  060  |  1E  40  30  20  36  00  DA  28  11  00
34:116  0:000  070  |  00  1A  00  00  00  FD  00  38  4B  1E
34:116  0:000  080  |  51  0E  00  0A  20  20  20  20  20  20
34:116  0:000  090  |  00  00  00  FC  00  53  79  6E  63  4D
34:116  0:000  100  |  61  73  74  65  72  0A  20  20  00  00
34:116  0:000  110  |  00  FF  00  48  53  41  50  32  30  31
34:116  0:000  120  |  35  35  34  0A  20  20  00  5B
34:116  0:000  NVidia GFX injection not set
34:116  0:000  stringlength = 3450
34:116  0:000  CurrentMode: Width=1680 Height=1050
34:116  0:000  Beginning FSInjection
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: DE441A98
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: DE441A98
34:117  0:000  Use origin smbios table type 1 guid.
34:118  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
34:118  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.12
34:118  0:000    Extra kext: EFI\CLOVER\kexts\10.12\FakeSMC.kext
34:123  0:004      Extra PlugIn kext: EFI\CLOVER\kexts\10.12\FakeSMC.kext\Contents\PlugIns\HWInfo.kext
34:124  0:001      Extra PlugIn kext: EFI\CLOVER\kexts\10.12\FakeSMC.kext\Contents\PlugIns\IntelCPUMonitor.kext
34:125  0:001      Extra PlugIn kext: EFI\CLOVER\kexts\10.12\FakeSMC.kext\Contents\PlugIns\W836x.kext
34:128  0:003    Extra kext: EFI\CLOVER\kexts\10.12\Marvell88E8056.kext
34:130  0:001  Custom boot is disabled
34:130  0:000  Closing log
 

 

It shows good value for me (Q9400 @ 3,2GHz, FSB QDR=1,6GHz).

thank you :thumbsup_anim: .

 

log is good. i'm considering Slice's mentioned FSB information(AppleSMBIOS.kext). also collecting more information from intel site.

hmm.. still confuse

did you overclock your cpu right?

 

https://ark.intel.com/en/products/35365/Intel-Core2-Quad-Processor-Q9400-6M-Cache-2_66-GHz-1333-MHz-FSB

 

original FSB QDR = 1333(333*4). cacluate External Clock is 1333/4= 333Mhz. right? i suspect you maybe did up 333 to 400.

 

according to AppleSMBIOS source,

 

if (busSpeedMTs == 0)

{

busSpeedMTs = cpuInfo->externalClock;

busSpeedMTs *= 4; // Assume quad-pumped FSB

DEBUG_LOG("SMBIOS: FSB speed (MT/s) = %u\n", busSpeedMTs);

}

 

i think

your ExternalClock is 333mhz(your origninal-no overclock)

BuSpeedMTS 333*4 -> 1333.

 

add

my cpu https://ark.intel.com/en/products/88180/Intel-Core-i3-6100U-Processor-3M-Cache-2_30-GHz

 

 

Bus Speed4 GT/s OPI

 

ExternalClock is 100(read original) when booting from clover. if i put my external 100(original), shown hw.busfrequency = 400000000, 400,000,000(hz)

 

to match ExternalClock in table type4 like apple, external clock /4 then get external 25mhz.  then clover correct PIS value externalclock(25)*4 = 100

and use PIS value to hw.busfrequency: 100000000.

 

this is gerneral process since sandybridge cpu. because apple use this process since sandybridge.

 

but in old realmac, ExternalClock used original value.

ex macmini3,1

 

Version: Intel® Core2 Duo CPU     P7350  @ 2.00GHz

Voltage: 1.6 V
External Clock: 266 MHz
Max Speed: 2000 MHz

 

this is realmac DMI dump

P7350 cpu info

http://ark.intel.com/products/36750/Intel-Core2-Duo-Processor-P7350-3M-Cache-2_00-GHz-1066-MHz-FSB

 

 

Bus Speed1066 MHz FSB

 

now, we start calculate bus speed

Bus Speed = externalclock * 4

Bus Speed= 266,600(khz)*4 = 1066400khz ->  1066mhz

 

maybe shown hw.busfrequency: 1066400000hz in real macmini3,1

 

also shown bus speed in system profiler

 

  모델명: Mac mini

  모델 식별자: Macmini3,1

  프로세서 이름: Intel Core 2 Duo

  프로세서 속도: 2 GHz

  프로세서 개수: 1

  코어 개수: 2

  L2 캐시: 3 MB

  메모리: 2 GB

  버스 속도: 1.07 GHz

 

1,066,400,000

1,066,400,000(hz) -> 1,066,400(khz) -> 1,066(mhz) -> 1.07(ghz)(rounding to the nearest whole number)

  • Like 1
Link to comment
Share on other sites

Right, i do raise my external FSB from 333 to 400MHz which is known for QX9750, but with 12M cache :rolleyes: .

So your are right too, original quad FSB is 1333 MHz for Q9400 and 1066 for your dual core CPU.

 

In my logs, i always had these lines which i don't understand :

3:105 0:000 FSBFrequency = 475 MHz, DMI FSBFrequency = 400 MHz,  -> FSB is always false detected and corrected by DMI, perhaps because of my overclock ?

 

and :

3:105 0:000 Turbo: 9/0/0/-> what is this "9" value for a Penryn CPU with no turbo ?

Link to comment
Share on other sites

Right, i do raise my external FSB from 333 to 400MHz which is known for QX9750, but with 12M cache :rolleyes: .

So your are right too, original quad FSB is 1333 MHz for Q9400 and 1066 for your dual core CPU.

 

In my logs, i always had these lines which i don't understand :

3:105 0:000 FSBFrequency = 475 MHz, DMI FSBFrequency = 400 MHz, -> FSB is always false detected and corrected by DMI, perhaps because of my overclock ?

 

and :

3:105 0:000 Turbo: 9/0/0/0 -> what is this "9" value for a Penryn CPU with no turbo ?

In my logs, i always had these lines which i don't understand :

3:105 0:000 FSBFrequency = 475 MHz, DMI FSBFrequency = 400 MHz, -> FSB is always false detected and corrected by DMI, perhaps because of my overclock ?

-> not sure. FSBFrequency shown other value in old cpu. My cpu shown that same both FSBFrequency and DMI FSBFrequency.

I think clover choice DMI FSB to match correct value to calculate PIS or QPI.

 

and :

3:105 0:000 Turbo: 9/0/0/0 -> what is this "9" value for a Penryn CPU with no turbo ?

-> I dont know. Maybe Slice know.

 

나의 LG-F800S 의 Tapatalk에서 보냄

 

Type "sysctl hw.busfrequency" in terminal

 

 

나의 LG-F800S 의 Tapatalk에서 보냄

Link to comment
Share on other sites

Some issue Clover here

appears after Clover r4098, 4098 OK

today I update Clover r4101

 

Missing Logo box thème in_box

 

 

 

screen14.png

 

This is what its like in 4101  :(

screen15.png

 

 

Link to comment
Share on other sites

×
×
  • Create New...