themacmeister Posted May 1, 2015 Share Posted May 1, 2015 Well, within 24 hours of vowing never to attempt a Yosemite install again, here is my working Gigabyte GA-EP45-DSEL running 10.10.3 Yosemite. I was gifted the motherboard, and added 2x2GB DDR2 800MHz RAM, put it in my old P5KPL-CM case (with sata HDD and DVD-RW) with a 1GB GeForce 9500 GT. Only a measly 350W power supply, but all I need at the moment. I found a perfect dsdt.aml file on this wonderful site, and apart from teething problems with OpenGL (even though the correct NVIDIA drivers were loading, only a small amount of screensavers were available, and grid mode in the Dock was ridiculously slow. I used Pacifist to overwrite/update all apparent drivers, and also all frameworks which might be used. Used Disk Utility to repair disk permissions (there were always some important ones without execute permissions). I removed ApplePolicyControl, AppleTymce.kext, AppleUpstreamUserClient.kext, and updated kextcache. All is wonderful now, even with only 4GB RAM (there are 4 RAM slots for 8GB, or even 16GB apparently - I have never seen a 4GB DDR2 stick, but I guess they made them for some servers). Shutdown/Restart/Sleep/Wake work magnificently, as does the pitiful two-stage speedstep on my Core-2-Duo 8300 (2.83GHz). Using MacPro3,1 SMBios.plist from Chameleon Wizard. Also using USBBusFix, darkwake=0, GraphicsEnabler=No as startup flags. Like the previous Asus experiment, I was getting blackscreen on launch, and the only way to fix this was to remove GeForce* and NVDA* kexts temporarily. I injected the graphics card with hex string into device-properties in org.chameleon.Boot.plist, but after installing fileNVRAM kext and module, I could remove this and start with GraphicsEnabler=No and no injection, and it still has the custom name I set in the hex string?! weird, but handy. I currently have the machine sleeping for 24 hours, to see how it works when I resume. Waking is instantaneous, which is amazing. I have not used pmset to fix all the settings, so it is probably using safe-sleep at the moment. Many thanks to the original authors of the DSDT file here. I am also considering downloading the Cartri MOD BIOS for this motherboard... which apparently makes it even more mac-like and compatible. More news as it emerges. Link to comment https://www.insanelymac.com/forum/topic/305958-success-10103-on-ga-ep45-dsel/ Share on other sites More sharing options...
themacmeister Posted May 1, 2015 Author Share Posted May 1, 2015 PS. I *HAD* to patch AppleRTC to prevent CMOS reset on every boot !!! To get to the point where I could do that, I just reset all the BIOS settings on each reboot, rebooted again, and I could get back into OSX to patch RTC :-) Link to comment https://www.insanelymac.com/forum/topic/305958-success-10103-on-ga-ep45-dsel/#findComment-2132377 Share on other sites More sharing options...
luki1979 Posted May 1, 2015 Share Posted May 1, 2015 775 architecture is quite old but you should upgrade your dual core to quad core. They are very cheap on eBay. Something like q6600 paired with 5770 will make it work like real MacPro 3,1 and can be bought for very little money. Link to comment https://www.insanelymac.com/forum/topic/305958-success-10103-on-ga-ep45-dsel/#findComment-2132378 Share on other sites More sharing options...
themacmeister Posted May 1, 2015 Author Share Posted May 1, 2015 thanks luki1979, that is exactly what I am looking for. Going to try and max-out the RAM before that tho - 4GB just isn't enough for this computer. I also need a multi-card-reader (with USB2.0) for the front panel - it needs to be full optical-width, as there is no floppy breakout on this case. Link to comment https://www.insanelymac.com/forum/topic/305958-success-10103-on-ga-ep45-dsel/#findComment-2132415 Share on other sites More sharing options...
themacmeister Posted May 8, 2015 Author Share Posted May 8, 2015 Maxed out RAM with 4x2GB 800MHz DDR2 (instead of old 667MHz). Got a GTS 450 installed now, going to try the AGPM kext edit to get this working all the time (possibly with EFI hex string, or with GE=Yes). Fingers crossed... Also, I will change SMBIOS to iMac9.1 for better Socket 775 support. Link to comment https://www.insanelymac.com/forum/topic/305958-success-10103-on-ga-ep45-dsel/#findComment-2133924 Share on other sites More sharing options...
themacmeister Posted May 13, 2015 Author Share Posted May 13, 2015 [sOLVED] Editing AGPM under iMac9,1 got the GTS 450 working perfectly. I might go back to MacPro3,1 - but I am happy as is (PS. I am now running Mavericks 10.9.5, as it is so much faster to get around than Yosemite) Link to comment https://www.insanelymac.com/forum/topic/305958-success-10103-on-ga-ep45-dsel/#findComment-2135088 Share on other sites More sharing options...
natgab Posted May 14, 2015 Share Posted May 14, 2015 Well, within 24 hours of vowing never to attempt a Yosemite install again, here is my working Gigabyte GA-EP45-DSEL running 10.10.3 Yosemite. I was gifted the motherboard, and added 2x2GB DDR2 800MHz RAM, put it in my old P5KPL-CM case (with sata HDD and DVD-RW) with a 1GB GeForce 9500 GT. Only a measly 350W power supply, but all I need at the moment. I found a perfect dsdt.aml file on this wonderful site, and apart from teething problems with OpenGL (even though the correct NVIDIA drivers were loading, only a small amount of screensavers were available, and grid mode in the Dock was ridiculously slow. I used Pacifist to overwrite/update all apparent drivers, and also all frameworks which might be used. Used Disk Utility to repair disk permissions (there were always some important ones without execute permissions). I removed ApplePolicyControl, AppleTymce.kext, AppleUpstreamUserClient.kext, and updated kextcache. All is wonderful now, even with only 4GB RAM (there are 4 RAM slots for 8GB, or even 16GB apparently - I have never seen a 4GB DDR2 stick, but I guess they made them for some servers). Shutdown/Restart/Sleep/Wake work magnificently, as does the pitiful two-stage speedstep on my Core-2-Duo 8300 (2.83GHz). Using MacPro3,1 SMBios.plist from Chameleon Wizard. Also using USBBusFix, darkwake=0, GraphicsEnabler=No as startup flags. Like the previous Asus experiment, I was getting blackscreen on launch, and the only way to fix this was to remove GeForce* and NVDA* kexts temporarily. I injected the graphics card with hex string into device-properties in org.chameleon.Boot.plist, but after installing fileNVRAM kext and module, I could remove this and start with GraphicsEnabler=No and no injection, and it still has the custom name I set in the hex string?! weird, but handy. I currently have the machine sleeping for 24 hours, to see how it works when I resume. Waking is instantaneous, which is amazing. I have not used pmset to fix all the settings, so it is probably using safe-sleep at the moment. Many thanks to the original authors of the DSDT file here. I am also considering downloading the Cartri MOD BIOS for this motherboard... which apparently makes it even more mac-like and compatible. More news as it emerges. Had you previously used a similar / similar-era C2D Motherboard as a Hackintosh? I belive your Motherboard is the same era as my Gigabyte G41M-ES2L micro atx. I am still on Mavericks and since most of the Yosemite threads are for newer builds, I might try the method you used if it seems compatible with the Northbridge on my Hack. I hope you can post more of the steps you took to get your system working. I have been lazy and been hoping for a simpler installer like myHack Kakewalk or Stella rolla. Link to comment https://www.insanelymac.com/forum/topic/305958-success-10103-on-ga-ep45-dsel/#findComment-2135369 Share on other sites More sharing options...
themacmeister Posted May 21, 2015 Author Share Posted May 21, 2015 http://www.tonymacx86.com/mavericks-desktop-support/123472-gigabyte-g41m-es2l-mavericks-install-guide.html You could try that with Mavericks first (and note the kexts/fixes selected in Mavericks [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] settings), then try it with Yosemite, using [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], and the kexts in new [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]. I would personally stick with Mavericks 10.9.5 due to performance (I believe I have downgraded my DS3L back to 10.9.5 already) Link to comment https://www.insanelymac.com/forum/topic/305958-success-10103-on-ga-ep45-dsel/#findComment-2137470 Share on other sites More sharing options...
themacmeister Posted July 2, 2015 Author Share Posted July 2, 2015 dangit, I had to throw this motherboard away. It was crashing/freezing at random (which is really strange, as it worked great before I went back to Win7 64). It was only happening a few minutes in, but fan speeds did not change, so probably not an overheat. Think it was a cracked board, so salvaged everything off it, and dumped it :-( I thought it may have been my 9500 GT, but it is working fine in another build. Oh well, I'll keep my eyes open for another old compatible Gigabyte board (with DSDT available) :-) Link to comment https://www.insanelymac.com/forum/topic/305958-success-10103-on-ga-ep45-dsel/#findComment-2150049 Share on other sites More sharing options...
Stefe Hobs Posted July 2, 2015 Share Posted July 2, 2015 Got a GTS 450 installed now ..... It was crashing/freezing at random .... Think it was a cracked board.... ur problem called Fermi-Freeze mate Link to comment https://www.insanelymac.com/forum/topic/305958-success-10103-on-ga-ep45-dsel/#findComment-2150102 Share on other sites More sharing options...
feriso Posted July 9, 2015 Share Posted July 9, 2015 Where abouts did you find the dsdt? I have a GA-P35-DS3R board with Q6600 and not having much luck, either beachball at grey screen before installn starts or nothing is copied over :-/ so its nice to see sucess with a similar board though I'm currently on Lion with this board with no issues. I have 8800GT in but a 460GTX ready to go in as well when I can have any length of time to get into the PC. Any other tips or help pointers? Link to comment https://www.insanelymac.com/forum/topic/305958-success-10103-on-ga-ep45-dsel/#findComment-2152049 Share on other sites More sharing options...
limurphy Posted August 21, 2015 Share Posted August 21, 2015 I have GA EP-45 UD3P mobo +E8400 CPU+ Gigabyte ATI HD4850 512g + 8G ram. And I had successed install Yosemite 10.10.5 & Mavericks 10.9.5.. on 2 seperate partitions . I had patched AMD4800Controller.kext, AppleRTC.kext & ATIRadeonX2000.kext. Smbios which I use is iMac 9.1. I also change sound layout id to 0x42 in dsdt.aml without patching AppleHDA.kext. Sleep,speed-stepping (24,28,32,34) ,sound all working. Link to comment https://www.insanelymac.com/forum/topic/305958-success-10103-on-ga-ep45-dsel/#findComment-2162342 Share on other sites More sharing options...
djmastera2000 Posted September 4, 2015 Share Posted September 4, 2015 @limurphy Hello, can you tell me which dsdt you used for, or did you create it by yourself? I have EP45-DS5 mobo with E8400 CPU, 8GB RAM and additional Radeon HD4850 1GB and looking for ready to use dsdt, wanna install Yosemite too... Perhaps you can upload dsdt+kext here thx Link to comment https://www.insanelymac.com/forum/topic/305958-success-10103-on-ga-ep45-dsel/#findComment-2165492 Share on other sites More sharing options...
spakk Posted September 4, 2015 Share Posted September 4, 2015 it is always better to create a dsdt for their own system. Little things like another BIOS update, can already lead to boot problem, even if the hardware is identical. Therefore, create your own DSDT. Link to comment https://www.insanelymac.com/forum/topic/305958-success-10103-on-ga-ep45-dsel/#findComment-2165494 Share on other sites More sharing options...
djmastera2000 Posted September 4, 2015 Share Posted September 4, 2015 Generally, you're right thou... Can you tell me how to do it easy way, or post a link for good tutorial 'bout creating own dsdt? thx Link to comment https://www.insanelymac.com/forum/topic/305958-success-10103-on-ga-ep45-dsel/#findComment-2165501 Share on other sites More sharing options...
spakk Posted September 4, 2015 Share Posted September 4, 2015 download MacIasl.app or DSDT-Editor.app, run one of the above-mentioned app's. generating with the tool a dsdt and save the raw dsdt as dsdt.dsl, then start the integrated compiler and work every error gradually. Then gradually install the required patches for your hardware. ... After each patch the compiler start to avoid unnecessary errors. by a guide you have to google it. The operation of the tool is self-explanatory, the repair of faults and patch that requires good knowledge .... Link to comment https://www.insanelymac.com/forum/topic/305958-success-10103-on-ga-ep45-dsel/#findComment-2165519 Share on other sites More sharing options...
themacmeister Posted January 28, 2017 Author Share Posted January 28, 2017 UPDATE: I have replaced with GA-EP45-DS3L, with same 8GB DDR2 800MHz RAM, and 512MB GeForce 9800 GT. Also updated to macOS Sierra 10.12.3 I needed to decompile old (10.6) minimal DSDT.aml and recompile under Sierra (using RehabMan's MaciASL). Otherwise it would kernel panic on boot. Restart/shutdown takes a little longer than before... but besides that, seems to be working 100% with full ethernet/audio/video/power states and wake/sleep ;-) Link to comment https://www.insanelymac.com/forum/topic/305958-success-10103-on-ga-ep45-dsel/#findComment-2358546 Share on other sites More sharing options...
Recommended Posts