RichieKotzen Posted April 5, 2015 Share Posted April 5, 2015 helloI installed Yosemite everything ok, I installed clover on USB stick, for testingosx with Clover part quietlyInstead windows 7 crashes with Clover operating systems are on two separate hard drivesthe bios set to boot efi this is my config.plist I did some tests, windows starts with Clover only if the bios is not set to UEFIand with this setting config.plist.zip Archivio.zip Schermata 2015-04-05 alle 10.55.02.zip Link to comment https://www.insanelymac.com/forum/topic/305465-windows-7-problems-with-clover/ Share on other sites More sharing options...
fusion71au Posted April 5, 2015 Share Posted April 5, 2015 @RichieKotzen, It is best to install Windows in UEFI mode for best compatibility with Clover and dual boot with OSX. If you are using Clover in native UEFI mode, it might be possible to set Boot/Legacy=LegacyBiosDefault in Clover's config.plist to boot legacy MBR Windows - see post#5227 by @dmazar. Have a look at @avin7000's guide for how to install Windows in UEFI mode on non UEFI (legacy BIOS) machines through Clover. @Slice also has a guide to installing UEFI Windows through Clover from the Windows DVD. If you don't want to touch your existing legacy install of Windows, an alternative is to boot to Windows with its own bootloader (giving the legacy Windows bootloader first priority in the BIOS) and then chainload to Clover on the second hard drive when you need OSX - see my guide using EasyBCD/Grub4DOS here. Good Luck! Link to comment https://www.insanelymac.com/forum/topic/305465-windows-7-problems-with-clover/#findComment-2125399 Share on other sites More sharing options...
durpflip Posted April 8, 2015 Share Posted April 8, 2015 my fix was to boot recovery instead of the windows partition as the MBR in that is compatible with clover. Link to comment https://www.insanelymac.com/forum/topic/305465-windows-7-problems-with-clover/#findComment-2126108 Share on other sites More sharing options...
Recommended Posts