Popular Post Mieze Posted January 31, 2015 Popular Post Share Posted January 31, 2015 (edited) This project is dedicated to the memory of Mausi, the cat I loved more than anybody else. A few days before Christmas I started my latest project, a new driver for recent Intel onboard LAN controllers. My intention was not to replace hnak's AppleIntelE1000e.kext completely but to deliver best performance and stability on recent hardware. That's why I dropped support for a number of older NICs. Currently the driver supports: 5 Series 82578LM 82578LC 82578DM 82578DC 6 and 7 Series 82579LM 82579V 8 and 9 Series I217LM I217V I218LM I218V I218LM2 I218V2 I218LM3 100 Series (since V2.1.0d0) I219LM I219V 200 Series (since V2.3.0d0) I219LM I219V 300 Series (since V2.4.0d0) I219LM I219V 400 Series (since V2.5.1d1) I219LM I219V Key Features of the Driver Support for multisegment packets relieving the network stack of unnecessary copy operations when assembling packets for transmission. No-copy receive and transmit. Only small packets are copied on reception because creating a copy is more efficient than allocating a new buffer. TCP, UDP and IPv4 checksum offload (receive and transmit). Support for TCP/IPv6 and UDP/IPv6 checksum offload. Makes use of the chip's TCP Segmentation Offload (TSO) feature with IPv4 and IPv6 in order to reduce CPU load while sending large amounts of data (disabled due to hardware bugs). Fully optimized for Sierra (64bit architecture) but should work with older 64bit versions of macOS too, provided you build from source with the appropriate SDK for the target OS. Support for Energy Efficient Ethernet (EEE). VLAN support is implemented but untested as I have no need for it. The driver is published under GPLv2. Current Status The driver has been tested successfully with I217V, I218V, I219V and 82579V under 10.9.5 and above. The attached archive includes source code as well as a prebuilt binary (debug version) for Mavericks and newer versions of macOS. Known Issues There seem to be problems while using VMware with version 1.x.x of the driver. In case you are affected use version 2.0.0 or newer. FAQ Could you add support of for...? Well, you are probably asking me to add support for one of the older NICs like the 82571/2/3/4L or 82583 and the answer will be no as I dropped support for these chips intentionally. They are broken and I lost more than 2 weeks trying to make it work on the 82574L without success. I was asked to add support for I210, I211 and I350 but as these chips have a completely different architecture, which isn't supported by the underlying Linux driver, this is impossible, sorry. Does it work with Snow Leopard or 32 bit kernels? No and I have no plans to make a version for 32 bit kernels or anything older than Lion. WoL from S5 doesn't work with this driver but under Windows it's working. Is this a driver bug? No it isn't, the driver is working as it should because OS X doesn't support WoL from S5. Installation Goto /S/L/E and delete AppleIntelE1000e.kext. Recreate the kernel cache. Open System Preferences and delete the corresponding network interface, e. g. en0. Reboot. Install the new driver and recreate the kernel cache. I recommend to use Kext Wizard or a similar utility for the installation. Reboot Open System Preferences again, select Network and check if the new network interface has been created automatically or create it manually now. Configure the interface. Help - I'm getting kernel panics! Well, before you start complaining about bugs after you upgraded macOS and ask me to publish a driver update, you should first try to resolve the issue on your own by cleaning the system caches. As the driver uses macOS's private network driver interface, which is supposed to be used by Apple provided drivers only, you might run into problems after an OS update because the linker may fail to recognize that IONetworking.kext has been updated and that the driver needs to be linked against the new version (Apple provided drivers avoid this problem because they are always updated together with IONetworking.kext). As a result, the linking process produces garbage and the driver may call arbitrary code when trying to call functions from IONetworking.kext. This usually results in unpredicted behavior or a kernel panic. In order to recover from such a situation, you should clean the System Caches forcing the linker to recreate it's caches: Delete all the files in /System/Library/Caches and it's subdirectories but leave the directories and the symbolic links intact. This is very important! Reboot. Recreate the kernel cache. Reboot again. Troubleshooting Make sure you have followed the installation instructions especially when you have issues with certain domains while the others are working fine. Use the debug version to collect log data when trying to track down problems. The kernel log messages can be retrieved with "grep kernel /var/log/system.log" in Terminal. Starting from Sierra use "log show --predicate "processID == 0" --debug" in order to retrieve kernel logs. Include the log data when asking for support or giving feedback. I'm an engineer, not a clairvoyant. Don't copy and paste large amounts of log data to your post. Create an archive with the log data and attach it to your post. In case you don't want to make your log data publicly accessible, contact me via PM and I will provide you a mail address to send it directly to me. Check your BIOS settings. You might want to disable Network Boot and the UEFI Network Stack as these can interfere with the driver. Double check that you have removed any AppleIntelE1000e.kext from your system because it could prevent the driver from working properly. Delete the following files: /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist /Library/Preferences/SystemConfiguration/preferences.plist Verify your bootloader configuration, in particular the kernel flags. Avoid using npci=0x2000 or npci=0x3000. In Terminal run netstat -s in order to display network statistics. Carefully examine the data for any unusual activity like a high number of packets with bad IP header checksums, etc. In case auto-configuration of the link layer connection doesn't work it might be necessary to select the medium manually in System Preferences under Network for the interface. Use Wireshark to create a packet dump in order to collect diagnostic information. Keep in mind that there are many manufacturers of network equipment. Although Ethernet is an IEEE standard, different implementations may show different behavior causing incompatibilities. In case you are having trouble try a different switch or a different cable. Changelog Version 2.5.0 (2019-10-15) Reworked interrupt throttling code and added new configuration parameters. Version 2.4.0 (2018-04-14) Added support for 300 series versions of I219LM and I219V. Updated underlying Linux source code. Version 2.3.0 (2017-06-20) Added support for 200 series versions of I219LM and I219V. Version 2.2.0 (2016-09-23) Disabled TSO to work around a hardware bug. Version 2.1.0 (2016-05-24) Added support for I219LM and I219V Version 2.0.0 (2015-04-22) First official release which is identical to 2.0.0d2 (only the version number has been changed). Version 2.0.0d2 (2015-04-04) Changed the tx descriptor write back policy for 82579, I217 and I218 to prevent random tx deadlocks. Version 2.0.0d1 (2015-03-14) Uses Apple's private driver interface introduced with 10.8. Supports packet scheduling with QFQ Solves the VMware issue. Version 1.0.0d6 (2015-03-04) Reworked TSO6 support to avoid problems with VMware. Wake-on-LAN now working. Version 1.0.0d5 (2015-02-27) Reworked TSO4 support to eliminate the bug of 1.0.0d4. Added some debug code in order to collect information about the VMware related issue. Version 1.0.0d4 (2015-02-25) Set total length field of the IP-header to zero for TSO4 operations. Report EEE activation state in kernel log message when the link has been established. Version 1.0.0d3 (2015-02-11) Reworked media selection and EEE support (EEE is now activated when both link partners support it. It can be disabled selecting the medium manually). Duplex setting for 10/100 MBit connections is now reported correctly. The number of tx descriptors has been reduced from 2048 to 1024. The code has been cleaned up and obsolete files have been removed. Version 1.0.0d2 (2015-01-31) First development release. Getting the Driver The source code can be found on GitHub: https://github.com/Mieze/IntelMausiEthernet There is also a prebuilt binary for 10.11 and above in the download section: http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/ Build from Source for 10.8 Register as a developer on Apple's developer website. A free membership is sufficient. Download a copy of Xcode 5.1.1 and install it on your machine. In the project select 10.8 as the "Base SDK" and the "Deployment Target". Call "Archive" from the menu "Product" and save the built driver. Credits Thanks to RehabMan and Yung Raj for running tests and pointing me in the right direction while I was trying to fix TSO. Special thanks to Yung Raj for motivating me when I was about to give up. Edited May 26, 2020 by Mieze 74 5 Link to comment https://www.insanelymac.com/forum/topic/304235-intelmausiethernetkext-for-intel-onboard-lan/ Share on other sites More sharing options...
anonymousnbs Posted January 31, 2015 Share Posted January 31, 2015 i try it and report if have bug thank you mieze Link to comment https://www.insanelymac.com/forum/topic/304235-intelmausiethernetkext-for-intel-onboard-lan/#findComment-2107208 Share on other sites More sharing options...
malek_bh Posted January 31, 2015 Share Posted January 31, 2015 tested on Dell Latitude E6320 with Intel® 82579LM Gigabit Network ,work ok , thank you Link to comment https://www.insanelymac.com/forum/topic/304235-intelmausiethernetkext-for-intel-onboard-lan/#findComment-2107233 Share on other sites More sharing options...
buoo Posted January 31, 2015 Share Posted January 31, 2015 Pinned! Thank you Link to comment https://www.insanelymac.com/forum/topic/304235-intelmausiethernetkext-for-intel-onboard-lan/#findComment-2107290 Share on other sites More sharing options...
AllenRoss Posted January 31, 2015 Share Posted January 31, 2015 Great Job Mieze Link to comment https://www.insanelymac.com/forum/topic/304235-intelmausiethernetkext-for-intel-onboard-lan/#findComment-2107362 Share on other sites More sharing options...
kilian Posted February 1, 2015 Share Posted February 1, 2015 Great job!!! Working perfect on my GB. Z87-D3HP One question my ethernet MAC address is 88:88:88:88:87:88, there is some way to change it? Thanks in advance Federico Link to comment https://www.insanelymac.com/forum/topic/304235-intelmausiethernetkext-for-intel-onboard-lan/#findComment-2107562 Share on other sites More sharing options...
Mieze Posted February 1, 2015 Author Share Posted February 1, 2015 One question my ethernet MAC address is 88:88:88:88:87:88, there is some way to change it? Yes, use ifconfig (see the man page) in Terminal to change the MAC address. Mieze 1 Link to comment https://www.insanelymac.com/forum/topic/304235-intelmausiethernetkext-for-intel-onboard-lan/#findComment-2107694 Share on other sites More sharing options...
tarasis Posted February 3, 2015 Share Posted February 3, 2015 Wonderful news. I will try it out tomorrow morning. Thank you for your work Mieze! Link to comment https://www.insanelymac.com/forum/topic/304235-intelmausiethernetkext-for-intel-onboard-lan/#findComment-2108184 Share on other sites More sharing options...
Mac Hosehead Posted February 3, 2015 Share Posted February 3, 2015 It's working on the Intel skull motherboard & Yosemite - 82578DC -MH Link to comment https://www.insanelymac.com/forum/topic/304235-intelmausiethernetkext-for-intel-onboard-lan/#findComment-2108196 Share on other sites More sharing options...
genzai Posted February 3, 2015 Share Posted February 3, 2015 so far so good with 82579V on UP5 TH. If this works well for a few days i will roll it out to the rest of the systems in my care that have supported chips. thanks for all you do Mieze! Whats the driver name stand for? g\ Link to comment https://www.insanelymac.com/forum/topic/304235-intelmausiethernetkext-for-intel-onboard-lan/#findComment-2108222 Share on other sites More sharing options...
Mieze Posted February 3, 2015 Author Share Posted February 3, 2015 Whats the driver name stand for? Well, Mausi was the name of my mother's cat who died a few weeks ago and I decided to dedicate the driver to Mausi because she was a brilliant cat. 6 Link to comment https://www.insanelymac.com/forum/topic/304235-intelmausiethernetkext-for-intel-onboard-lan/#findComment-2108228 Share on other sites More sharing options...
tarasis Posted February 3, 2015 Share Posted February 3, 2015 Installed and working on my Asus Z97-A with Intel218V ethernet. Will keep an eye on Netstats, so far the only things that stand out kctl: 5 send failures icmp6: 7 bad neighbor advertisement messages (not using ip6 anyway) arp: 2 ARP entries timed out Thank you. Link to comment https://www.insanelymac.com/forum/topic/304235-intelmausiethernetkext-for-intel-onboard-lan/#findComment-2108239 Share on other sites More sharing options...
StrangeNoises Posted February 3, 2015 Share Posted February 3, 2015 Mausi installed on my Asus Z87I-PRO (Intel 217V) with Yosemite. All seems to be working so far. (Haven't tried big transfers yet.) Link to comment https://www.insanelymac.com/forum/topic/304235-intelmausiethernetkext-for-intel-onboard-lan/#findComment-2108291 Share on other sites More sharing options...
StrangeNoises Posted February 3, 2015 Share Posted February 3, 2015 Mausi installed on my Asus Z87I-PRO (Intel 217V) with Yosemite. All seems to be working so far. (Haven't tried big transfers yet.) ok, 107GB transferred over rsync over ssh over ipv6 no problems at all. That's a good start. I'll just leave it in use until and unless I have a problem... 1 Link to comment https://www.insanelymac.com/forum/topic/304235-intelmausiethernetkext-for-intel-onboard-lan/#findComment-2108298 Share on other sites More sharing options...
avian Posted February 3, 2015 Share Posted February 3, 2015 Mausi installed on a Gigabyte z97x-ud7th with Intel 217V on Mavericks 10.9.5. So far so good, a few large-ish transfer to check for issues, no problems yet. Out of interest is jumbo frame support something planned for the future? Link to comment https://www.insanelymac.com/forum/topic/304235-intelmausiethernetkext-for-intel-onboard-lan/#findComment-2108302 Share on other sites More sharing options...
Mieze Posted February 3, 2015 Author Share Posted February 3, 2015 Out of interest is jumbo frame support something planned for the future? I thought about implementing support for jumbo frames but I don't know if it's worth the effort as there is almost no gain in throughput in real world scenarios. Mieze Link to comment https://www.insanelymac.com/forum/topic/304235-intelmausiethernetkext-for-intel-onboard-lan/#findComment-2108344 Share on other sites More sharing options...
rednous Posted February 3, 2015 Share Posted February 3, 2015 Mieze, thank you for your massive (imho) work. Thumbs up So far the driver's working nice (also having correct report of the NIC model / version). Will report if any issues or strange behaviour occur: Link to comment https://www.insanelymac.com/forum/topic/304235-intelmausiethernetkext-for-intel-onboard-lan/#findComment-2108422 Share on other sites More sharing options...
buoo Posted February 3, 2015 Share Posted February 3, 2015 Mieze, thank you for your massive (imho) work. Thumbs up So far the driver's working nice (also having correct report of the NIC model / version). Will report if any issues or strange behaviour occur: Does it work better than hank's E1000e with Yos ? Link to comment https://www.insanelymac.com/forum/topic/304235-intelmausiethernetkext-for-intel-onboard-lan/#findComment-2108429 Share on other sites More sharing options...
rednous Posted February 3, 2015 Share Posted February 3, 2015 Does it work better than hank's E1000e with Yos ? Can't tell yet it's better than hnak's (guess it is, cause Mieze says he dropped pretty old models / respective code in his fork), but Mieze's driver's displaying the model of my NIC at least so far. Will test / investigate further. Link to comment https://www.insanelymac.com/forum/topic/304235-intelmausiethernetkext-for-intel-onboard-lan/#findComment-2108434 Share on other sites More sharing options...
buoo Posted February 3, 2015 Share Posted February 3, 2015 Do you know a good way to test the transfer rate of an ethernet/wifi chip? I'd like to make a comparison between two different chips. Link to comment https://www.insanelymac.com/forum/topic/304235-intelmausiethernetkext-for-intel-onboard-lan/#findComment-2108436 Share on other sites More sharing options...
Mieze Posted February 3, 2015 Author Share Posted February 3, 2015 Do you know a good way to test the transfer rate of an ethernet/wifi chip? I'd like to make a comparison between two different chips. Use iperf for basic speed tests. For real world tests you could use Blackmagic Disk Speed Test over an AFP or SMB connection to a fileserver. Mieze 2 Link to comment https://www.insanelymac.com/forum/topic/304235-intelmausiethernetkext-for-intel-onboard-lan/#findComment-2108492 Share on other sites More sharing options...
avian Posted February 4, 2015 Share Posted February 4, 2015 Use iperf for basic speed tests. For real world tests you could use Blackmagic Disk Speed Test over an AFP or SMB connection to a fileserver. Mieze Thanks for the tip regarding Blackmagic Disk Speed Test. I was just copying a 700gb folder over to a linux box via AFP, starting a stopwatch and looking at the "about 2 hours" as a guide, then trying to catch it at the end to stop the stopwatch. Granted I was also trying to test stability of large transfers at the same time, but I do I feel rather silly now. So far after 12 hours of the driver being in place, and a complete/new time machine backup to test it out a bit more, its still solid. Things are looking good. Thanks for your incredible work Meize. Also understood about the jumbo frames. I think its more psychological on my end more than anything, seeing almost all my equipment/switches etc support jumbo frames, it feels a little sad when the old hackintoshes are left out. But if its a major bit of work to implement, then its totally understandable - I'm just glad to have a driver for the i217V thats this stable so far. Link to comment https://www.insanelymac.com/forum/topic/304235-intelmausiethernetkext-for-intel-onboard-lan/#findComment-2108508 Share on other sites More sharing options...
rednous Posted February 4, 2015 Share Posted February 4, 2015 Do you know a good way to test the transfer rate of an ethernet/wifi chip? I'd like to make a comparison between two different chips. I am aware of SpeedTest.net. Stumbled upon LAN Speed Test Lite (free) for Mac and Using netcat to test network speed. Hope they will be of use to you 1 Link to comment https://www.insanelymac.com/forum/topic/304235-intelmausiethernetkext-for-intel-onboard-lan/#findComment-2108547 Share on other sites More sharing options...
tarasis Posted February 4, 2015 Share Posted February 4, 2015 Its been working well for me the last day with very solid speeds. BlackMagic Speed Test, 2GB OS X SSD (MacPC) to SSD (13" MBP) transfers are roughly 105MB/s (write, read was 101.4GB), OS X to Win 7 on same devices was a bit faster. (so fast it made some component on the MBP whine) OS X SSD (MacPC) to HDD (Mac Mini) results wobble a bit, Write fluctuates between 26MB/s to 58.4MB/s, Read between 34.7MB/s-104.7MB (the 104MB/s & 109MB/s results seem oddly high for a 5400rpm HDD, cached in RAM?) 1 Link to comment https://www.insanelymac.com/forum/topic/304235-intelmausiethernetkext-for-intel-onboard-lan/#findComment-2108557 Share on other sites More sharing options...
bubbl3 Posted February 5, 2015 Share Posted February 5, 2015 Thank you! Working like a charm on my setup with I217v, much better speeds than with the standard kext. Link to comment https://www.insanelymac.com/forum/topic/304235-intelmausiethernetkext-for-intel-onboard-lan/#findComment-2108906 Share on other sites More sharing options...
Recommended Posts