dixipix Posted September 22, 2016 Share Posted September 22, 2016 I have submitted a picture where it stops right now. The strange thing here is that i have managed to get passed this and ending up with a grey screen with the mouse pointer active just spinning that colored wheel. When i click the mouse it disappear. I´ve left the computer on that grey screen for about 7 hours and nothing is happening. https://www.dropbox.com/sh/39qp9zky4q5b4bn/AACVlsNnM2nIkSxb5H4IugZIa?dl=0 Config.plist is OK. I don't know why nothing happens. You should boot in verbose mode and provide photo of the stop screen. Hello again, were you able to see something strange in the pictures i posted? I tried creating an USB-stick with the installer and ended up with the same problem with the grey screen. Link to comment Share on other sites More sharing options...
Sherlocks Posted September 22, 2016 Share Posted September 22, 2016 Hmm, I'm not that arsed to patch the BIOS myself. what is your CPU? Intel® Core™2 CPU E7400 @ 2.8Ghz right? Link to comment Share on other sites More sharing options...
vandroiy2012 Posted September 22, 2016 Share Posted September 22, 2016 Hello again, were you able to see something strange in the pictures i posted? I tried creating an USB-stick with the installer and ended up with the same problem with the grey screen.I think your FakeSMC is missing. Use latest Clover and check FakeSMC in EFI/Clover/Kexts/Other. Link to comment Share on other sites More sharing options...
dixipix Posted September 22, 2016 Share Posted September 22, 2016 I think your FakeSMC is missing. Use latest Clover and check FakeSMC in EFI/Clover/Kexts/Other. That folder is empty. How do i get that kext? Link to comment Share on other sites More sharing options...
vandroiy2012 Posted September 22, 2016 Share Posted September 22, 2016 That folder is empty. How do i get that kext?Ask somebody. I'm writing from phone. Can't send it((( Link to comment Share on other sites More sharing options...
Huckleberry Pie Posted September 22, 2016 Share Posted September 22, 2016 what is your CPU? Intel® Core™2 CPU E7400 @ 2.8Ghz right? That was on my old rig. The one I'm using right now is a G3258 on an ASUS H81M-D board. Right now I'm trying to get Sierra retail to run but making power management work correctly is a chore in itself. Link to comment Share on other sites More sharing options...
dixipix Posted September 22, 2016 Share Posted September 22, 2016 Ask somebody. I'm writing from phone. Can't send it((( Thanks! I will try with that! Is there anybody here that can send me the fakesmc kext? Link to comment Share on other sites More sharing options...
Sherlocks Posted September 22, 2016 Share Posted September 22, 2016 That was on my old rig. The one I'm using right now is a G3258 on an ASUS H81M-D board. Right now I'm trying to get Sierra retail to run but making power management work correctly is a chore in itself.Give me config.plist I want to check your config.plist 나의 LG-F410S 의 Tapatalk에서 보냄 1 Link to comment Share on other sites More sharing options...
dixipix Posted September 22, 2016 Share Posted September 22, 2016 Ask somebody. I'm writing from phone. Can't send it((( I managed to get the fakesmc.kext with sierra support and the installer starts but ends after like 1 minute and says that it cant control or repair the filesystem. Now i try to boot back into macos and after 20 seconds the system totally dies and just kills the computer. I tried to block the kext in the bootloader but the problem is there. How can i delete the kext file without have the option to boot the system? Is there anything i can do to delete that file in efi/clover/kexts/other ? Link to comment Share on other sites More sharing options...
vandroiy2012 Posted September 22, 2016 Share Posted September 22, 2016 Sorry, don't know))). This patches are confirmed working!!! I'm sure you did something wrong. Check your clover settings and version of clover. Must be latest!!! 1 Link to comment Share on other sites More sharing options...
dixipix Posted September 22, 2016 Share Posted September 22, 2016 Sorry, don't know))). This patches are confirmed working!!! I'm sure you did something wrong. Check your clover settings and version of clover. Must be latest!!! Alright. Maybe the fakesmc i got was wrong. But now i cant replace it because i cant boot up the old version anymore because of the kext. The clover was the latest version i could find Link to comment Share on other sites More sharing options...
vandroiy2012 Posted September 22, 2016 Share Posted September 22, 2016 Alright. Maybe the fakesmc i got was wrong. But now i cant replace it because i cant boot up the old version anymore because of the kext. The clover was the latest version i could find OK. Provide complete list of your hardware (DPCI Manager in OS X or PCI-Z in Windows), your full EFI folder. I'll try to make you working copy. Link to comment Share on other sites More sharing options...
dixipix Posted September 22, 2016 Share Posted September 22, 2016 OK. Provide complete list of your hardware (DPCI Manager in OS X or PCI-Z in Windows), your full EFI folder. I'll try to make you working copy. Thanks! Here´s the PCI-Z file: https://www.dropbox.com/s/b3jexqpyosm6aby/DANIEL-PC-PCI-Z.txt?dl=0 Here´s the full EFI folder: https://www.dropbox.com/s/8m1uyljxvph2pc3/EFI.rar?dl=0 I managed to delete the fakesmc from kexts but the problem with crashing machine is still there right now. And again, thanks for helping me! For some reason the old config file is in that directory right now. The edited one that you looked at is here: https://www.dropbox.com/s/tujpftfbytgtvdx/config.plist?dl=0 Link to comment Share on other sites More sharing options...
vandroiy2012 Posted September 22, 2016 Share Posted September 22, 2016 Also give me your motherboard and CPU models... Or better add them in signature in profile. Link to comment Share on other sites More sharing options...
dixipix Posted September 22, 2016 Share Posted September 22, 2016 The motherboard is: MSI Z87-G45 The CPU is: Intel Pentium G3220 3Ghz Link to comment Share on other sites More sharing options...
vandroiy2012 Posted September 22, 2016 Share Posted September 22, 2016 The motherboard is: MSI Z87-G45 The CPU is: Intel Pentium G3220 3Ghz Unpack it. Put it on USB flash drive formatted in FAT32, reboot and choose UEFI boot from flash drive. Boot Install macOS Sierra in verbose mode. If stop or panic provide photo. If PC reboots after panic add debug=0x100 in bootargs https://www.dropbox.com/s/xevgrkuzeawueyc/EFI.zip?dl=0 Link to comment Share on other sites More sharing options...
dixipix Posted September 22, 2016 Share Posted September 22, 2016 Unpack it. Put it on USB flash drive formatted in FAT32, reboot and choose UEFI boot from flash drive. Boot Install macOS Sierra in verbose mode. If stop or panic provide photo. If PC reboots after panic add debug=0x100 in bootargs https://www.dropbox.com/s/xevgrkuzeawueyc/EFI.zip?dl=0 Did all the steps and ending up with this and after that the system reboots with or without debug=0x100 https://www.dropbox.com/s/55ei28k0tpy86y8/Foto%202016-09-22%2018%2013%2047.jpg?dl=0 Link to comment Share on other sites More sharing options...
vandroiy2012 Posted September 22, 2016 Share Posted September 22, 2016 Did all the steps and ending up with this and after that the system reboots with or without debug=0x100 https://www.dropbox.com/s/55ei28k0tpy86y8/Foto%202016-09-22%2018%2013%2047.jpg?dl=0 Open EFI/Clover/Drivers64UEFI and delete OsxAptioFix2Drv. Instead of it put attached OsxAptioFixDrv. OsxAptioFixDrv-64.efi.zip Link to comment Share on other sites More sharing options...
dixipix Posted September 22, 2016 Share Posted September 22, 2016 Open EFI/Clover/Drivers64UEFI and delete OsxAptioFix2Drv. Instead of it put attached OsxAptioFixDrv. OsxAptioFixDrv-64.efi.zip I replaced the file and ended up with the same result. It reboots at the same place. Link to comment Share on other sites More sharing options...
vandroiy2012 Posted September 22, 2016 Share Posted September 22, 2016 I replaced the file and ended up with the same result. It reboots at the same place. Update BIOS to latest version, drop it to Optimized Defaults and try again. Also you could try Legacy boot if you installed Clover for Legacy booting. Link to comment Share on other sites More sharing options...
dixipix Posted September 22, 2016 Share Posted September 22, 2016 Update BIOS to latest version, drop it to Optimized Defaults and try again. Also you could try Legacy boot if you installed Clover for Legacy booting. It seems that bios is up to date. Loaded optimized settings and now im just presented by the apple logo without a progressbar. After 3 seconds it reboots again. In legacy-mode the apple logo is presented and after 4-5 seconds i got a circle with a diagonal line over it. Link to comment Share on other sites More sharing options...
vandroiy2012 Posted September 22, 2016 Share Posted September 22, 2016 It seems that bios is up to date. Loaded optimized settings and now im just presented by the apple logo without a progressbar. After 3 seconds it reboots again. In legacy-mode the apple logo is presented and after 4-5 seconds i got a circle with a diagonal line over it. debug=0x100 and Verbose Mode!!! UEFI mode Link to comment Share on other sites More sharing options...
dixipix Posted September 22, 2016 Share Posted September 22, 2016 debug=0x100 and Verbose Mode!!! UEFI mode Normal mode: https://www.dropbox.com/s/wk6hhsaea75yrt1/Foto%202016-09-22%2019%2001%2006.jpg?dl=0 Legacy mode: https://www.dropbox.com/s/u9g7pkvzi9ik5vl/Foto%202016-09-22%2019%2002%2001.jpg?dl=0 Link to comment Share on other sites More sharing options...
vandroiy2012 Posted September 22, 2016 Share Posted September 22, 2016 Add Debug->True in config.plist, restart in UEFI mode, boot Install macOS Sierra and give me preboot.log from EFI/Clover/misc after restart Booting will be very long ±10 min... Link to comment Share on other sites More sharing options...
dixipix Posted September 22, 2016 Share Posted September 22, 2016 Add Debug->True in config.plist, restart in UEFI mode, boot Install macOS Sierra and give me preboot.log from EFI/Clover/misc after restart Снимок экрана 2016-09-22 в 20.08.02.png Booting will be very long ±10 min... Here is the debug file: https://www.dropbox.com/s/g7ht9ixr3ojjici/debug.log?dl=0 And heres a picture of whats happen: https://www.dropbox.com/s/ehl5v5f1fitfepb/Foto%202016-09-22%2019%2025%2010.jpg?dl=0 Preboot.log is not presented at all in that folder Link to comment Share on other sites More sharing options...
Recommended Posts