Jump to content

Guide for Installing OS X on Lenovo IdeaPad Y510p

ahmed_ais

By ahmed_ais,
in Installation Guides

 Share
1,428 posts in this topic

Recommended Posts

TarvoMaesepp
TarvoMaesepp
Posted
Posted

@intruder @ahmed_ais, Thank you for everything. Now I have fully working OS X in my machine. I've learned so much during this process and all that thanks to you guys! Thank you for making these guides and all these patchers and making this possible. I rally don't know where you guys take this time :D Earth is small, if we will meet I am going to buy you a coffee! I have to admit that once again INTERNET is god damn good place!

 

Cheers! :P

Link to comment
Share on other sites
intruder16
intruder16
Posted
Posted

@intruder @ahmed_ais, Thank you for everything. Now I have fully working OS X in my machine. I've learned so much during this process and all that thanks to you guys! Thank you for making these guides and all these patchers and making this possible. I rally don't know where you guys take this time :D Earth is small, if we will meet I am going to buy you a coffee! I have to admit that once again INTERNET is god damn good place!

 

Cheers! :P

 

Great!

Link to comment
Share on other sites
ahmed_ais
ahmed_ais
Posted
  • Author
Posted

@intruder @ahmed_ais, Thank you for everything. Now I have fully working OS X in my machine. I've learned so much during this process and all that thanks to you guys! Thank you for making these guides and all these patchers and making this possible. I rally don't know where you guys take this time :D Earth is small, if we will meet I am going to buy you a coffee! I have to admit that once again INTERNET is god damn good place!

 

Cheers! :P

 

Haha .. just coffee?? not a sandwich as well? Enjoy!

Link to comment
Share on other sites
ahmed_ais
ahmed_ais
Posted
  • Author
Posted

... But now I don't have working hackintosh to make bootable USB. Is it option to use torrent if I can say this word in this forum? And then use TransMac to make it bootable? Does it make any difference if I have 10.10 or 10.10.3 ? Can I update it later in OS X? My friend with mac is now in other city so I can't borrow his mac anymore :( I would like to make USB first and then think about backing up my things ....

Just for the record, I came across this post from Slice:

Utility to install Clover from Windows http://cvad-mac.narod.ru/bootdiskutilityexe/

Therefor, using this utility we could be able to create the bootable USB and install Clover all from Windows exactly as stated on that link 

- Make bootable USB Flash Disk for MAC OS X with Latest Clover bootloader revision fast and easy by one click under OS Windows. -

 

 

I haven't tried this, but thought it is good to know ...

Link to comment
Share on other sites
ahmed_ais
ahmed_ais
Posted
  • Author
Posted

Has anyone upgraded to win10 confirm we can successfully boot into osx tok

 

You are very worried and should calm down. Trust the community and everything will be fine on the right time. For now, both Windows 10 and El Capitan are previews and even if one of them worked now there is no guarantee that it will work when it released. Only those who develop utilities we all use (like Clover EFI) should experiment with every new build. We on the other hand should start experimenting later when the OS's almost take the final shape (or even after RTM) and hopefully the utilities are updated by then.

Link to comment
Share on other sites
TarvoMaesepp
TarvoMaesepp
Posted
Posted

Has anyone upgraded to win10 confirm we can successfully boot into osx tok

Am i am facing some sleep problems i am not able to boot after sleep

I wouldn't do this ATM. Not that you can't boot into os x but if you play games some smart guys told that it is not as good as it should be.

 

My question is to you guys. Do I ha to do something to get imessage to work? I tried to to something with SMBIOS but it ended up with weird things like the navbar was full of stripes etc.. I use mac pro 11,2 like you said in tutorial it should be pretty bug free.

Link to comment
Share on other sites
ahmed_ais
ahmed_ais
Posted
  • Author
Posted

My question is to you guys. Do I ha to do something to get imessage to work? I tried to to something with SMBIOS but it ended up with weird things like the navbar was full of stripes etc.. I use mac pro 11,2 like you said in tutorial it should be pretty bug free.

The SMBIOS is not buggy but you should read this carefully: http://www.insanelymac.com/forum/topic/298027-guide-aio-guides-for-hackintosh/page-9
Link to comment
Share on other sites
ahmed_ais
ahmed_ais
Posted
  • Author
Posted

I made a new thread to discuss the problem of IGPU and restart. We all have the problem when we change resolution, connect external display, set display to sleep, or set system to sleep, then restart functionality will get affected. Once we reboot in this case there will be no display (while the system is functioning). I hope some one gives us a helping hand on the new thread:

 

Y510p (Intel HD4600) IGPU driver initialisation/re-initialisation problem

Link to comment
Share on other sites
ahmed_ais
ahmed_ais
Posted
  • Author
Posted

I have been told that some people (with HD5500 and HD6000) reported having our graphic-restart issue with Yosemite and that it was fixed in El Capitan. I thought to test El Capitan for myself and check but unfortunately the problem persist. But I thought to take the chance and report back here about my experience with this early build.

 

Screen_Shot_2015_06_16_at_00_24_48.png

 

Graphics: Intel HD4600 works in QE/CI the same way as in Yosemite. The same graphics-restart problem persist and somehow I feel the UI a bit heavier than Yosemite. I also have the illusion of the existence of some gradients (and I checked that the custom EDID is loaded).
IMAG0321.jpg
 
Audio: AppleHDA from El Capitan reported in many topics that it needs a new patch. The one from Yosemite 10.10.3 works just fine for now although EAPDFix.kext is broken (KP).
 
Keyboard, mouse, touchpad: All OK (at least using VoodooPS2Controller.kext).
 
USB: USB2 port works fine. USB3 ports, however, are troublesome. At rare times a device connected through them works although they are usually visible through System Profiler. 
 
Sleep: Works fine. Although there are some kernel assertions in (pmset -g assertions) about all USB devices (calling them externaldevices while all of them are USB devices that already had treatment in DSDT)
 
Web-Cam: OK
 
Battery: OK
 
Brightness: Works but ACPIBacklight.kext have to be removed for now. This means OS does not save brightness values between sessions and levels are not fine.
 
WiFi: Works OK for those who have BCM4352 without issues
 
Ethernet: Haven’t tested that.
 
Bluetooth: Current kexts failed but there is a fix for BTFirmwareUploader.kext so should not be an issue. 
 
Some of the issues (like AppleHDA and USB) are general for all systems due to changes Apple made so far in El Capitan.Therefor, these will be fixed on time. I also had problems using Kext Wizard but EasyKext Utility did the trick.
 
I liked El Capitan but we need to have patience and I believe we will get the final build working on our Y510p in no time!
  • Like 2
Link to comment
Share on other sites
notten
notten
Posted
Posted

Haha...Well it was not the seller's fault. The Indian Post Office sucks. 

 

Yep. Enjoying it. A very nice experience. Now, onto SSD.

If it matters at all, I have a Micron M550 1TB running right now. It's super fast. Boots in about 5 seconds from Clover to Login screen. It's WAY faster than the 1TB spinner that was in here before. I used the USB key that I used to install OS X and dd and an external drive enclosure to copy the whole old drive onto the SSD. This machine is WAY better with one. I used a MIcron M550 in one, and a Samsung 840 in the other. Here's the Crucial M500 1TB for $309 in the US: http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=7869891 sale ends today.

  • Like 1
Link to comment
Share on other sites
intruder16
intruder16
Posted
Posted

If it matters at all, I have a Micron M550 1TB running right now. It's super fast. Boots in about 5 seconds from Clover to Login screen. It's WAY faster than the 1TB spinner that was in here before. I used the USB key that I used to install OS X and dd and an external drive enclosure to copy the whole old drive onto the SSD. This machine is WAY better with one. I used a MIcron M550 in one, and a Samsung 840 in the other. Here's the Crucial M500 1TB for $309 in the US: http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=7869891 sale ends today.

 

Thanks for the input. I'll keep it in mind.

Link to comment
Share on other sites
Prathamesh555
Prathamesh555
Posted
Posted

Guys my laptop is not booting up last night i just put it on sleep and after an hour when i try to wake it up it was not responding i tried to reboot but still no sucess any help i had done couple of my android and forgot to take backup on github pls help well such issue happens frequently but my hackintosh always boot up after a restart

Link to comment
Share on other sites
vusun123
vusun123
Posted
Posted

Guys my laptop is not booting up last night i just put it on sleep and after an hour when i try to wake it up it was not responding i tried to reboot but still no sucess any help i had done couple of my android and forgot to take backup on github pls help well such issue happens frequently but my hackintosh always boot up after a restart

Try cancel hibernation

  • Like 1
Link to comment
Share on other sites
intruder16
intruder16
Posted
Posted

Here is the link of system log http://s15.postimg.org/xc7dnxsxn/image.jpg

The rebuild legacy battery log i called repeatedly and it enters in some kind of bootloop

 

Try repairing yosemite partition using Disk Utility in installer usb or fdisk in single user mode. Do a verbose boot and post full screen.

 

If your PC doesn't wake from sleep (happens intermittently), put it to sleep again (close the lid) and wake after a minute.

Link to comment
Share on other sites
intruder16
intruder16
Posted
Posted

I tried but it is giving me some kind of error saying cannot unmount Yosemite (which is My disk name)...

 

Error? Unmount? Details plz.

 

Please post in detail what you did and didn't. I can assume unlimited possibilities and can't help without knowing what you did exactly. I'm not a clairvoyant.

 

And about sleeping how can i put laptop to sleep when it is not getting booted...

 

Obviously you cannot put your pc to sleep without booting it first.

 

Guys my laptop is not booting up last night i just put it on sleep and after an hour when i try to wake it up it was not responding....

 

..If your PC doesn't wake from sleep (happens intermittently), put it to sleep again (close the lid) and wake after a minute.

 

 

Got it now? This is a general advice for you (or anyone else) to do when you are unable to wake from sleep.

 

Please read carefully before posting.

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...