Codinger Posted January 19, 2016 Share Posted January 19, 2016 // I will patch it for you. Think that you have to patch the display order too. So if HDMI is your 1. monitor you have to set the third hex bit to 01 Link to comment Share on other sites More sharing options...
kopap81 Posted January 20, 2016 Share Posted January 20, 2016 Hi guys i need your help i can't make my LVDS work properly i patched but the LVDS has weird colours HDMI and Display Port works OS X can see both my 7970M with full hardware acceleration i can play games from steam Wimbledon XT A01 MXM GDDR5 300e/10m 0.9V A1 Subsystem Vendor ID: 1028 Subsystem ID: 57b Object Header Structure Size: 435 Connector Object Table Offset: 52 Router Object Table Offset: 0 Encoder Object Table Offset: 13f Display Path Table Offset: 12 Connector Object Id [22] which is [(unknown)] encoder obj id [0x21] which is [iNTERNAL_UNIPHY2 (osx txmit 0x22 [duallink 0x2] enc 0x5)] linkb: true Connector Object Id [22] which is [(unknown)] encoder obj id [0x1e] which is [iNTERNAL_UNIPHY (osx txmit 0x10 [duallink 0x0] enc 0x0)] linkb: false Connector Object Id [19] which is [DISPLAY_PORT] encoder obj id [0x20] which is [iNTERNAL_UNIPHY1 (osx txmit 0x21 [duallink 0x1] enc 0x3)] linkb: true Connector Object Id [12] which is [HDMI_TYPE_A] encoder obj id [0x20] which is [iNTERNAL_UNIPHY1 (osx txmit 0x11 [duallink 0x1] enc 0x2)] linkb: false Connector Object Id [12] which is [HDMI_TYPE_A] encoder obj id [0x21] which is [iNTERNAL_UNIPHY2 (osx txmit 0x12 [duallink 0x2] enc 0x4)] linkb: false Connector Object Id [5] which is [VGA] encoder obj id [0x15] which is [iNTERNAL_KLDSCP_DAC1 (osx txmit 0x00 enc 0x10?)] linkb: false ATOM BIOS Rom: SubsystemVendorID: 0x1028 SubsystemID: 0x057b IOBaseAddress: 0x0000 Filename: C42904A1.119 BIOS Bootup Message: Wimbledon XT A01 MXM GDDR5 300e/150m 0.9V A1 PCI ID: 1002:6800 Connector at index 0 Type [@offset 45948]: (null) (-1055027892) Encoder [@offset 45952]: INTERNAL_UNIPHY2 (0x21) i2cid [@offset 46084]: 0x93, OSX senseid: 0x4 Connector at index 1 Type [@offset 45958]: (null) (-1055027892) Encoder [@offset 45962]: INTERNAL_UNIPHY (0x1e) i2cid [@offset 46111]: 0x94, OSX senseid: 0x5 Connector at index 2 Type [@offset 45968]: DisplayPort (10) Encoder [@offset 45972]: INTERNAL_UNIPHY1 (0x20) i2cid [@offset 46138]: 0x91, OSX senseid: 0x2 Connector at index 3 Type [@offset 45978]: HDMI-A (11) Encoder [@offset 45982]: INTERNAL_UNIPHY1 (0x20) i2cid [@offset 46165]: 0x90, OSX senseid: 0x1 Connector at index 4 Type [@offset 45988]: HDMI-A (11) Encoder [@offset 45992]: INTERNAL_UNIPHY2 (0x21) i2cid [@offset 46192]: 0x92, OSX senseid: 0x3 Connector at index 5 Type [@offset 45998]: VGA (1) Encoder [@offset 46002]: INTERNAL_KLDSCP_DAC1 (0x15) i2cid [@offset 46219]: 0x97, OSX senseid: 0x8 Buri 02000000000100002905010010000505 00040000040300000009020011020101 00040000040300000009030021030202 00080000040200000001040012040303 Patched 02000000400000000901010010000005 00040000040300000009020022050104 00040000040300000009030011020201 00080000040200000001040012040303 Link to comment Share on other sites More sharing options...
drone4zone Posted January 24, 2016 Share Posted January 24, 2016 @codinger YOU ARE THE MAN !!! it totally works I get 3 displays thank you thank you (= Link to comment Share on other sites More sharing options...
Codinger Posted January 24, 2016 Share Posted January 24, 2016 @codinger YOU ARE THE MAN !!! it totally works I get 3 displays thank you thank you (=Thats cool You are welcome. This should work 02000000400000000908010110000005 1 Link to comment Share on other sites More sharing options...
h.M.M Posted January 24, 2016 Share Posted January 24, 2016 @codinger:So is it the Sense ID that determiner where the port should be placed?Tried to place HDMI on top and arrange them closer to the original but still crashing. 0000000 00 08 00 00 04 02 00 00 00 01 00 00 22 05 03 03 0000010 00 04 00 00 04 03 00 00 00 01 00 00 12 04 00 01 0000020 00 04 00 00 04 03 00 00 00 01 00 00 10 00 01 05 0000030 04 00 00 00 14 02 00 00 00 01 00 00 11 02 04 04 0000040 00 04 00 00 04 03 00 00 00 01 00 00 20 01 02 06 There is something I'm not understanding when it comes to this patching.Every time I've crash the system when trying to add that secondary monitor. Link to comment Share on other sites More sharing options...
Codinger Posted January 24, 2016 Share Posted January 24, 2016 @codinger: So is it the Sense ID that determiner where the port should be placed? Tried to place HDMI on top and arrange them closer to the original but still crashing. 0000000 00 08 00 00 04 02 00 00 00 01 00 00 22 05 03 03 0000010 00 04 00 00 04 03 00 00 00 01 00 00 12 04 00 01 0000020 00 04 00 00 04 03 00 00 00 01 00 00 10 00 01 05 0000030 04 00 00 00 14 02 00 00 00 01 00 00 11 02 04 04 0000040 00 04 00 00 04 03 00 00 00 01 00 00 20 01 02 06 There is something I'm not understanding when it comes to this patching.Every time I've crash the system when trying to add that secondary monitor. You have to choose a framebuffer with lvds Link to comment Share on other sites More sharing options...
h.M.M Posted January 24, 2016 Share Posted January 24, 2016 You have to choose a framebuffer with lvds Oh? Isn't lvds for laptop monitors or is there something I'm missing? Link to comment Share on other sites More sharing options...
drone4zone Posted January 24, 2016 Share Posted January 24, 2016 Thats cool You are welcome. This should work 02000000400000000908010110000005 02000000400000000908010110000005 is that the code I need to put in clover? I just patched my DSDT and it worked , thanks =) Link to comment Share on other sites More sharing options...
Codinger Posted January 24, 2016 Share Posted January 24, 2016 02000000400000000908010110000005No its for another user sorry for confusion Link to comment Share on other sites More sharing options...
kopap81 Posted January 24, 2016 Share Posted January 24, 2016 Thanks Codinger but still i have the same problem with the colours Link to comment Share on other sites More sharing options...
ultrazonestudios Posted January 27, 2016 Share Posted January 27, 2016 Hi ! I believe I need some help on this one... My card is a Sapphire Dual-X R9 280X 3G D5 (1002,6798). It has a DisplayPort connector, an HDMI, a DVI-D and a DVI-I. I want to use three displays, but no matter what I try, only two are able to fire up when reaching the desktop. My displays are connected via DisplayPort, HDMI and DVI-D, and none of the DVI connectors turn on. Every single display works fine when it is the only one connected to the card, and every combination of two monitors works too without problems, so this fact leads me to believe the solution could be easy. These are my radeon & redsock dumps: ATOM BIOS Rom: SubsystemVendorID: 0x174b SubsystemID: 0x3001 IOBaseAddress: 0x0000 Filename: 249L0C00.U46 BIOS Bootup Message: Tahiti B0 XTL C38650 GDDR5 3GB 500e/150m PCI ID: 1002:6798 Connector at index 0 Type [@offset 43578]: DisplayPort (10) Encoder [@offset 43582]: INTERNAL_UNIPHY2 (0x21) i2cid [@offset 43696]: 0x90, OSX senseid: 0x1 HotPlugID: 5 Connector at index 1 Type [@offset 43588]: HDMI-A (11) Encoder [@offset 43592]: INTERNAL_UNIPHY2 (0x21) i2cid [@offset 43723]: 0x91, OSX senseid: 0x2 HotPlugID: 4 Connector at index 2 Type [@offset 43598]: DVI-D (3) Encoder [@offset 43602]: INTERNAL_UNIPHY1 (0x20) i2cid [@offset 43750]: 0x92, OSX senseid: 0x3 HotPlugID: 1 Connector at index 3 Type [@offset 43608]: DVI-I (2) Encoder [@offset 43612]: INTERNAL_UNIPHY (0x1e) i2cid [@offset 43787]: 0x95, OSX senseid: 0x6 HotPlugID: 3 Connector at index 4 Type [@offset 43618]: DVI-I (2) Encoder [@offset 43622]: INTERNAL_KLDSCP_DAC1 (0x15) i2cid [@offset 43787]: 0x95, OSX senseid: 0x6 HotPlugID: 3 249L0C00.U46: Tahiti B0 XTL C38650 GDDR5 3GB 500e/150m Subsystem Vendor ID: 174b Subsystem ID: 3001 Object Header Structure Size: 384 Connector Object Table Offset: 48 Router Object Table Offset: 0 Encoder Object Table Offset: 118 Display Path Table Offset: 12 Connector Object Id [19] which is [DISPLAY_PORT] encoder obj id [0x21] which is [INTERNAL_UNIPHY2 (osx txmit 0x12 [duallink 0x2] enc 0x4)] linkb: false Connector Object Id [12] which is [HDMI_TYPE_A] encoder obj id [0x21] which is [INTERNAL_UNIPHY2 (osx txmit 0x22 [duallink 0x2] enc 0x5)] linkb: true Connector Object Id [4] which is [DVI_D] encoder obj id [0x20] which is [INTERNAL_UNIPHY1 (osx txmit 0x11 [duallink 0x1] enc 0x2)] linkb: false Connector Object Id [2] which is [DVI_I] encoder obj id [0x1e] which is [INTERNAL_UNIPHY (osx txmit 0x10 [duallink 0x0] enc 0x0)] linkb: false Connector Object Id [2] which is [DVI_I] encoder obj id [0x15] which is [INTERNAL_KLDSCP_DAC1 (osx txmit 0x00 enc 0x10?)] linkb: false Here are the framebuffers included in the AMD7000Controller.kext from 10.10.5: -------------------------AMD7000Controller.kext------------------------- Ramen (6) @ 0x1a2c50 LVDS, HDMI, DP, DP, DP, DP 02000000000100002904010020010506 00080000040200000001020010000305 00040000040300000001030711020101 00040000000100000001040321030403 00040000040300000001050712040202 00040000000100000001060322050403 Namako (4) @ 0x1a2d20 LVDS, LVDS, DP, DP 02000000000100000001010322050202 02000000000100000001020312040101 00040000040300000001030711020303 00040000040300000001040721030404 Aji (4) @ 0x1a2dc0 DP, DP, DDVI, HDMI 00040000040300000001010112040501 00040000040300000001020122050402 04000000140200000001030000000306 00080000040200000001040011020104 Buri (4) @ 0x1a2e00 LVDS, DP, DP, HDMI 02000000000100002905010010000505 00040000040300000009020011020101 00040000040300000009030021030202 00080000040200000001040012040303 Chutoro (5) @ 0x1a2e40 LVDS, DP, DP, DP, DP 02000000000100000901010012040303 00040000040300000001020111020101 00040000000100000009030021030202 00040000000100000009040022050404 00040000040300000001050010000505 Dashimaki (4) @ 0x1a2e90 DP, DP, DDVI, HDMI 00040000040300000001010112040202 00040000040300000001020022050305 04000000140200000001030100000404 00080000040200000001040011020101 Ebi (5) @ 0x1a2ed0 LVDS, DP, DP, DP, DP 02000000000100000901010012040303 00040000040300000001020111020101 00040000000100000009030121030202 00040000000100000009040122050404 00040000040300000001050110000505 Gari (5) @ 0x1a2f20 LVDS, DP, DP, DP, DP 02000000000100000901010012040303 00040000040300000001020111020101 00040000000100000009030021030202 00040000000100000009040022050404 00040000040300000001050010000505 Futomaki (4) @ 0x1a2fa0 DP, DP, DDVI, HDMI 00040000040300000001010112040401 00040000040300000001020122050502 04000000140200000001030000000606 00080000040200000001040011020103 Hamachi (4) @ 0x1a2fe0 DP, DP, DDVI, HDMI 00040000040300000001010112040501 00040000040300000001020122050402 04000000140200000001030000000306 00080000040200000001040011020104 OPM (6) @ 0x1a3060 DP, DP, DP, DP, DP, DP 00040000040300000001000111020101 00040000040300000001000121030202 00040000040300000001000112040303 00040000040300000001000122050404 00040000040300000001000110000505 00040000140300000001000120010606 Ikura (1) @ 0x1a30c0 HDMI 00080000040200000001010012040301 IkuraS (6) @ 0x1a30d0 DP, DP, DP, DP, DP, DP 00040000040300000001010711020103 00040000040300000001020721030204 00040000040300000001030712040301 00040000040300000001040722050402 00040000040300000001050710000505 00040000040300000001060720010606 Junsai (6) @ 0x1a3130 DP, DP, DP, DP, DP, DP 00040000040300000001000112040301 00040000040300000001000122050402 00040000040300000001000111020103 00040000040300000001000121030204 00040000040300000001000110000505 00040000040300000001000120010606 Kani (1) @ 0x1a3190 HDMI 00080000040200000001010012040301 KaniS (6) @ 0x1a31a0 DP, DP, DP, DP, DP, DP 00040000040300000001010711020103 00040000040300000001020721030204 00040000040300000001030712040301 00040000040300000001040722050402 00040000040300000001050710000505 00040000040300000001060720010606 DashimakiS (4) @ 0x1a3200 DP, DP, DDVI, HDMI 00040000040300000001010112040202 00040000040300000001020122050305 04000000140200000001030000000404 00080000040200000001040011020101 Maguro (1) @ 0x1a3240 HDMI 00080000040200000001010012040301 MaguroS (6) @ 0x1a3250 DP, DP, DP, DP, DP, DP 00040000040300000001010711020103 00040000040300000001020721030204 00040000040300000001030712040301 00040000040300000001040722050402 00040000040300000001050710000505 00040000040300000001060720010606 Since Clover injects Futomaki by default, this is the framebuffer I chose for editing. It has four ports (like my card) and HDMI audio worked OOB on at least one screen, so I thought it was a good candidate. So I turned what is contained within Futomaki: Futomaki (4) @ 0x1a2fa0 DP, DP, DDVI, HDMI 00040000040300000001010112040401 00040000040300000001020122050502 04000000140200000001030000000606 00080000040200000001040011020103 into: 00040000040300000001010112040501 - DP 00080000000200000001020122050402 - HDMI-A 04000000140200000001030011020103 - DVI-D 04000000040200000001040000100306 - DVI-I ...but it didn't work. The only change was that there were two HDMI audio connections available now (both in the displays that were up and running: DisplayPort and HDMI), so the problem with DVI connection was still there. So I tried again, changing this time the order of initialization of ports to DVI-D, HDMI, DP and DVI-I, but I got the same results. That's why now I'm wondering what could be the best way to keep on trying. So I've attached all the necessary information about my system (DSDT & SSDT, ioregs and config.plist of every change made) in the hope that someone could help me. Sorry for the long post and thanks in advance! ultrazone_baseline.zip Link to comment Share on other sites More sharing options...
Pavo Posted January 28, 2016 Share Posted January 28, 2016 Hi ! I believe I need some help on this one... My card is a Sapphire Dual-X R9 280X 3G D5 (1002,6798). It has a DisplayPort connector, an HDMI, a DVI-D and a DVI-I. I want to use three displays, but no matter what I try, only two are able to fire up when reaching the desktop. My displays are connected via DisplayPort, HDMI and DVI-D, and none of the DVI connectors turn on. Every single display works fine when it is the only one connected to the card, and every combination of two monitors works too without problems, so this fact leads me to believe the solution could be easy. These are my radeon & redsock dumps: ATOM BIOS Rom: SubsystemVendorID: 0x174b SubsystemID: 0x3001 IOBaseAddress: 0x0000 Filename: 249L0C00.U46 BIOS Bootup Message: Tahiti B0 XTL C38650 GDDR5 3GB 500e/150m PCI ID: 1002:6798 Connector at index 0 Type [@offset 43578]: DisplayPort (10) Encoder [@offset 43582]: INTERNAL_UNIPHY2 (0x21) i2cid [@offset 43696]: 0x90, OSX senseid: 0x1 HotPlugID: 5 Connector at index 1 Type [@offset 43588]: HDMI-A (11) Encoder [@offset 43592]: INTERNAL_UNIPHY2 (0x21) i2cid [@offset 43723]: 0x91, OSX senseid: 0x2 HotPlugID: 4 Connector at index 2 Type [@offset 43598]: DVI-D (3) Encoder [@offset 43602]: INTERNAL_UNIPHY1 (0x20) i2cid [@offset 43750]: 0x92, OSX senseid: 0x3 HotPlugID: 1 Connector at index 3 Type [@offset 43608]: DVI-I (2) Encoder [@offset 43612]: INTERNAL_UNIPHY (0x1e) i2cid [@offset 43787]: 0x95, OSX senseid: 0x6 HotPlugID: 3 Connector at index 4 Type [@offset 43618]: DVI-I (2) Encoder [@offset 43622]: INTERNAL_KLDSCP_DAC1 (0x15) i2cid [@offset 43787]: 0x95, OSX senseid: 0x6 HotPlugID: 3 249L0C00.U46: Tahiti B0 XTL C38650 GDDR5 3GB 500e/150m Subsystem Vendor ID: 174b Subsystem ID: 3001 Object Header Structure Size: 384 Connector Object Table Offset: 48 Router Object Table Offset: 0 Encoder Object Table Offset: 118 Display Path Table Offset: 12 Connector Object Id [19] which is [DISPLAY_PORT] encoder obj id [0x21] which is [INTERNAL_UNIPHY2 (osx txmit 0x12 [duallink 0x2] enc 0x4)] linkb: false Connector Object Id [12] which is [HDMI_TYPE_A] encoder obj id [0x21] which is [INTERNAL_UNIPHY2 (osx txmit 0x22 [duallink 0x2] enc 0x5)] linkb: true Connector Object Id [4] which is [DVI_D] encoder obj id [0x20] which is [INTERNAL_UNIPHY1 (osx txmit 0x11 [duallink 0x1] enc 0x2)] linkb: false Connector Object Id [2] which is [DVI_I] encoder obj id [0x1e] which is [INTERNAL_UNIPHY (osx txmit 0x10 [duallink 0x0] enc 0x0)] linkb: false Connector Object Id [2] which is [DVI_I] encoder obj id [0x15] which is [INTERNAL_KLDSCP_DAC1 (osx txmit 0x00 enc 0x10?)] linkb: false Here are the framebuffers included in the AMD7000Controller.kext from 10.10.5: -------------------------AMD7000Controller.kext------------------------- Ramen (6) @ 0x1a2c50 LVDS, HDMI, DP, DP, DP, DP 02000000000100002904010020010506 00080000040200000001020010000305 00040000040300000001030711020101 00040000000100000001040321030403 00040000040300000001050712040202 00040000000100000001060322050403 Namako (4) @ 0x1a2d20 LVDS, LVDS, DP, DP 02000000000100000001010322050202 02000000000100000001020312040101 00040000040300000001030711020303 00040000040300000001040721030404 Aji (4) @ 0x1a2dc0 DP, DP, DDVI, HDMI 00040000040300000001010112040501 00040000040300000001020122050402 04000000140200000001030000000306 00080000040200000001040011020104 Buri (4) @ 0x1a2e00 LVDS, DP, DP, HDMI 02000000000100002905010010000505 00040000040300000009020011020101 00040000040300000009030021030202 00080000040200000001040012040303 Chutoro (5) @ 0x1a2e40 LVDS, DP, DP, DP, DP 02000000000100000901010012040303 00040000040300000001020111020101 00040000000100000009030021030202 00040000000100000009040022050404 00040000040300000001050010000505 Dashimaki (4) @ 0x1a2e90 DP, DP, DDVI, HDMI 00040000040300000001010112040202 00040000040300000001020022050305 04000000140200000001030100000404 00080000040200000001040011020101 Ebi (5) @ 0x1a2ed0 LVDS, DP, DP, DP, DP 02000000000100000901010012040303 00040000040300000001020111020101 00040000000100000009030121030202 00040000000100000009040122050404 00040000040300000001050110000505 Gari (5) @ 0x1a2f20 LVDS, DP, DP, DP, DP 02000000000100000901010012040303 00040000040300000001020111020101 00040000000100000009030021030202 00040000000100000009040022050404 00040000040300000001050010000505 Futomaki (4) @ 0x1a2fa0 DP, DP, DDVI, HDMI 00040000040300000001010112040401 00040000040300000001020122050502 04000000140200000001030000000606 00080000040200000001040011020103 Hamachi (4) @ 0x1a2fe0 DP, DP, DDVI, HDMI 00040000040300000001010112040501 00040000040300000001020122050402 04000000140200000001030000000306 00080000040200000001040011020104 OPM (6) @ 0x1a3060 DP, DP, DP, DP, DP, DP 00040000040300000001000111020101 00040000040300000001000121030202 00040000040300000001000112040303 00040000040300000001000122050404 00040000040300000001000110000505 00040000140300000001000120010606 Ikura (1) @ 0x1a30c0 HDMI 00080000040200000001010012040301 IkuraS (6) @ 0x1a30d0 DP, DP, DP, DP, DP, DP 00040000040300000001010711020103 00040000040300000001020721030204 00040000040300000001030712040301 00040000040300000001040722050402 00040000040300000001050710000505 00040000040300000001060720010606 Junsai (6) @ 0x1a3130 DP, DP, DP, DP, DP, DP 00040000040300000001000112040301 00040000040300000001000122050402 00040000040300000001000111020103 00040000040300000001000121030204 00040000040300000001000110000505 00040000040300000001000120010606 Kani (1) @ 0x1a3190 HDMI 00080000040200000001010012040301 KaniS (6) @ 0x1a31a0 DP, DP, DP, DP, DP, DP 00040000040300000001010711020103 00040000040300000001020721030204 00040000040300000001030712040301 00040000040300000001040722050402 00040000040300000001050710000505 00040000040300000001060720010606 DashimakiS (4) @ 0x1a3200 DP, DP, DDVI, HDMI 00040000040300000001010112040202 00040000040300000001020122050305 04000000140200000001030000000404 00080000040200000001040011020101 Maguro (1) @ 0x1a3240 HDMI 00080000040200000001010012040301 MaguroS (6) @ 0x1a3250 DP, DP, DP, DP, DP, DP 00040000040300000001010711020103 00040000040300000001020721030204 00040000040300000001030712040301 00040000040300000001040722050402 00040000040300000001050710000505 00040000040300000001060720010606 Since Clover injects Futomaki by default, this is the framebuffer I chose for editing. It has four ports (like my card) and HDMI audio worked OOB on at least one screen, so I thought it was a good candidate. So I turned what is contained within Futomaki: Futomaki (4) @ 0x1a2fa0 DP, DP, DDVI, HDMI 00040000040300000001010112040401 00040000040300000001020122050502 04000000140200000001030000000606 00080000040200000001040011020103 into: 00040000040300000001010112040501 - DP 00080000000200000001020122050402 - HDMI-A 04000000140200000001030011020103 - DVI-D 04000000040200000001040000100306 - DVI-I ...but it didn't work. The only change was that there were two HDMI audio connections available now (both in the displays that were up and running: DisplayPort and HDMI), so the problem with DVI connection was still there. So I tried again, changing this time the order of initialization of ports to DVI-D, HDMI, DP and DVI-I, but I got the same results. That's why now I'm wondering what could be the best way to keep on trying. So I've attached all the necessary information about my system (DSDT & SSDT, ioregs and config.plist of every change made) in the hope that someone could help me. Sorry for the long post and thanks in advance! ultrazone_baseline.zip Sapphire Dual-X R9 280X should be using Aji or Hamachi, not Futomaki Link to comment Share on other sites More sharing options...
TimeShift Posted January 29, 2016 Share Posted January 29, 2016 Hey, guys! When using DVI-I it's working 100%, goes straight to the desktop. But when I want to plug it in my TV, I use HDMI, and it's not working how it should, the screen just stays black and I have to put the computer to sleep and wake it up to get video working. I'm using the Futomaki FB (patched using method on OP) and FakeID injection on Clover (68101002). Remember my card is a R9 270 not a 270X. Anyone know how to fix this or why it happens? Thanks! Link to comment Share on other sites More sharing options...
alexanderq Posted January 29, 2016 Share Posted January 29, 2016 http://www.insanelymac.com/forum/topic/310665-sapphire-dual-x-r9-270-hdmi-not-working-after-patched-fb/?do=findComment&comment=2211538 Link to comment Share on other sites More sharing options...
ultrazonestudios Posted January 30, 2016 Share Posted January 30, 2016 Sapphire Dual-X R9 280X should be using Aji or Hamachi, not Futomaki I'm getting the same results with Aji and Hamachi. Thanks! Link to comment Share on other sites More sharing options...
Codinger Posted January 30, 2016 Share Posted January 30, 2016 I'm getting the same results with Aji and Hamachi. Thanks! Its no deal breaker if you are using futomaki Link to comment Share on other sites More sharing options...
h.M.M Posted January 30, 2016 Share Posted January 30, 2016 I'm still unable to get the framebuffer patch to walk tried this guide and the one here http://www.rampagedev.com/?page_id=82&page=10 and still system crashes when connecting more then one monitor on my 390 Card. If someone wants to help me patch it please send me a pm and I can provide you with all the files you need. (Or check my post earlier in thread). Thanks. Link to comment Share on other sites More sharing options...
Picasso Posted January 31, 2016 Share Posted January 31, 2016 @h.M.M Install the guide from Rampage completely from zero. Exactly the guide. Don't edit you the framebuffer. 390 works. Link to comment Share on other sites More sharing options...
h.M.M Posted February 1, 2016 Share Posted February 1, 2016 @Picasso To just get it to work is no problem. The problem is to get it to work with more then one monitor and then FB patch seems to be the only thing that shall help. Link to comment Share on other sites More sharing options...
Dec_Bra1n Posted February 10, 2016 Share Posted February 10, 2016 Hello everyone since 3 days i am trying to get the connector information, I have Intel +AMD switchable Laptop intel hd 3000 + AMD 6770M well i have successfully extracted the rom using this article http://www.hackintoshmumbai.com/extract-gpu-rom-from-windows-amd-only/ i use this method because i am not able to get info when i dump the rom using Clover+F6 i have try decode the rom using that decoder which Vlada provides but i got this but nothing anything Help me get ConnectorInfo guys ..... c0000.bin.zip 1002_6740.rom.zip Link to comment Share on other sites More sharing options...
Mork vom Ork Posted February 11, 2016 Share Posted February 11, 2016 Finaly i did it! These are my Settings for 2 different RADEON GFX-Cards with different FrameBuffers via "Arbitrary"-Key under "Devices": Radeon HD6570 runs with FB "Gibba" while R9 380X runs with FB "Greyhound". Full QE and Accelleration. Connected are actually 3 Monitors: 4k Iilyama DP and Samsung 48" TV HDMI via R9 380X and same 4k Iilyama HDMI via HD6570 HD6570 in PCI-Slot#1 (primary Boot-GFX), Radeon R9 380X in PCI-Slot#3 Thanx for the hint to "Arbitrary" Key... ;-) Link to comment Share on other sites More sharing options...
cady_design2009 Posted February 15, 2016 Share Posted February 15, 2016 Helloo guys, i have a Sapphire R9 290 Vapor-x videocard and i cannot enable video acceleration in El Capitan. When i enable Ati injection the screen goes black. Can u help me with FB and Clover inection? becase i`m new in this and i cannot understand various steps on the tutorial . Thank you! I`m usin 2 monitors. Thank you in advance! 1002_67b1.zip Link to comment Share on other sites More sharing options...
Matthew82 Posted March 7, 2016 Share Posted March 7, 2016 (edited) Helloo guys, i have a Sapphire R9 290 Vapor-x videocard and i cannot enable video acceleration in El Capitan. When i enable Ati injection the screen goes black. Can u help me with FB and Clover inection? becase i`m new in this and i cannot understand various steps on the tutorial . Thank you! I`m usin 2 monitors. Thank you in advance! Try this in clover: </dict> <key>KernelAndKextPatches</key> <dict> <key>ATIConnectorsController</key> <string>8000</string> <key>ATIConnectorsData</key> <string>000400000403000000010300120403030004000004030000000101001102010100040000040300000001020021030202000400000403000000010400220504040004000004030000000105001000050500040000040300000001060020010606</string> <key>ATIConnectorsPatch</key> <string>000800000402000000010300220503030004000004030000000101001204010100040000040300000001020012040201040000000400000000010400010204040400000004000000000105000000050600040000040300000001060020010605</string> and in graphic section: </dict> <key>Graphics</key> <dict> <key>FBName</key> <string>Baladi</string> <key>Inject</key> <dict> <key>ATI</key> <true/> <key>Intel</key> <false/> <key>NVidia</key> <false/> </dict> <key>LoadVBios</key> <true/> <key>NvidiaSingle</key> <false/> </dict> in device section ad fake id in ATI: 0x67B01002 Edited March 7, 2016 by Allan Specials BBCodes added. Link to comment Share on other sites More sharing options...
0000-1248 Posted March 8, 2016 Share Posted March 8, 2016 Cheers mate, solved my R9 270X Dual-Display issue. Although, Futomaki didn't work; I had to use Hamachi for some reason. Mine is a Sapphire Dual-X 2GB. Another odd thing is that I have to plug in my second display after I log in, or I get screen artifacts. Anyway, not complaining! Thanks, - Matt Link to comment Share on other sites More sharing options...
keksonja Posted March 11, 2016 Share Posted March 11, 2016 Hello guys, I am going crazy trying to figure out my Sapphire 7970 3GB card. Whatever i do i get black screen the only way I can go to desktop is if I use fake id 0x6798 for ATI and put FBName Hamachi. I am booting in El Capitan 10.11.3 I have tried to load vBios but i get black screen. When i look at DPCIManager i see underframbuffer .Display_boot port5. What do I need to try next... Thanks all! Link to comment Share on other sites More sharing options...
Recommended Posts