Rampage Dev Posted February 12, 2015 Share Posted February 12, 2015 What SMBIOS are you using? Sounds like your using that other guys broken method... Link to comment Share on other sites More sharing options...
ergot Posted February 12, 2015 Share Posted February 12, 2015 MacPro 6,1 how the SMBIOS set in first place when installing clover? Link to comment Share on other sites More sharing options...
ergot Posted February 12, 2015 Share Posted February 12, 2015 i tried using iMac SMBIOS, now i have back the sleep option but nothing happened...can someone help me out please? speed test CPU test looks OK, see attached. this is when using Resolve rendering (55FPS), once finish cpu down to 1.2ghz which is saving power if I'm not wrong... Still i need to figure out sleep! I revert back to Mac Pro 6,1 sambas now sleep option is gone... Link to comment Share on other sites More sharing options...
Allan Posted February 13, 2015 Share Posted February 13, 2015 Be careful about use beta versions of OS X. In your signature, you use OS X 10.10.3 1 Link to comment Share on other sites More sharing options...
ergot Posted February 13, 2015 Share Posted February 13, 2015 Allan, the sleep problem was also at 10.10.1 and 10.10.2 so i don't think its related to beta versions.... Link to comment Share on other sites More sharing options...
oSxFr33k Posted February 15, 2015 Share Posted February 15, 2015 Has anything changed hex patch wise for Yosemite 10.10.2? Thanks Link to comment Share on other sites More sharing options...
stinga11 Posted February 15, 2015 Author Share Posted February 15, 2015 Has anything changed hex patch wise for Yosemite 10.10.2? Thanks No, the patch is the same. Link to comment Share on other sites More sharing options...
onidemon Posted February 24, 2015 Share Posted February 24, 2015 I have a Xeon E5-1620 V2 Ivy Bridge and i followed every step of this guide but i still have only 12, 37 states. Most of the time it's running at 3.7ghz theres no pm at all. Am i missing something or did i misunderstand the purpose of this post? Link to comment Share on other sites More sharing options...
onidemon Posted February 24, 2015 Share Posted February 24, 2015 I followed the steps again from scratch so i know i did everything correctly. Still only two states 12, 37 and i am using smbios mac pro 6,1 2015-02-24, 9:55:26 AM, Current State: 37 2015-02-24, 9:55:26 AM, P States: 12, 37 2015-02-24, 9:55:19 AM, Current State: 37 2015-02-24, 9:55:19 AM, P States: 12, 37 2015-02-24, 9:55:11 AM, Current State: 37 2015-02-24, 9:55:11 AM, P States: 37 2015-02-24, 9:55:03 AM, Current State: 37 2015-02-24, 9:55:03 AM, P States: 37 2015-02-24, 9:54:56 AM, Current State: 37 2015-02-24, 9:54:56 AM, P States: 37 2015-02-24, 9:54:48 AM, Current State: 37 2015-02-24, 9:54:48 AM, P States: 37 2015-02-24, 9:54:40 AM, Current State: 37 2015-02-24, 9:54:40 AM, P States: 37 2015-02-24, 9:54:33 AM, Current State: 37 Link to comment Share on other sites More sharing options...
Allan Posted February 24, 2015 Share Posted February 24, 2015 Try run Piker's script for generate a SSDT for you. 1 Link to comment Share on other sites More sharing options...
onidemon Posted February 24, 2015 Share Posted February 24, 2015 Try run Piker's script for generate a SSDT for you. I did, i ran it and copied the ssdt.aml file to my clover folder. Didnt make a difference. Maybe this does not work on my system? Link to comment Share on other sites More sharing options...
Allan Posted February 25, 2015 Share Posted February 25, 2015 Hmmm. We need take a look into your config.plist. Link to comment Share on other sites More sharing options...
Rampage Dev Posted February 25, 2015 Share Posted February 25, 2015 SSDT Gen. for x79 will be broken by defualt. Please PM to me so I can fix the SSDT you gen. Please do not change anything with the Clover Config.plist found on my x79 DMG. Thank you. 1 Link to comment Share on other sites More sharing options...
onidemon Posted February 25, 2015 Share Posted February 25, 2015 Hmmm. We need take a look into your config.plist. Here it is http://pastebin.com/7pdH3zjq Link to comment Share on other sites More sharing options...
Rampage Dev Posted February 25, 2015 Share Posted February 25, 2015 Again. Do not edit or touch the clover config. Link to comment Share on other sites More sharing options...
onidemon Posted February 26, 2015 Share Posted February 26, 2015 Again. Do not edit or touch the clover config. I didnt touch my config file. I sent you a PM too. Link to comment Share on other sites More sharing options...
Rampage Dev Posted February 26, 2015 Share Posted February 26, 2015 The SSDT that you generated for the CPU is correct. Link to comment Share on other sites More sharing options...
onidemon Posted February 27, 2015 Share Posted February 27, 2015 The SSDT that you generated for the CPU is correct. So why is it not working? Is my clover config file correct? What about the smbios? I am using Mac pro 6,1 but also tried iMac 13.2 and 2 Link to comment Share on other sites More sharing options...
Rampage Dev Posted February 27, 2015 Share Posted February 27, 2015 Again. Please use the Config on the x79 DMG. Link to comment Share on other sites More sharing options...
onidemon Posted February 28, 2015 Share Posted February 28, 2015 Again. Please use the Config on the x79 DMG. I tried and it's worst. Now shows only one state, 37. The only thing i changed was to add my boot flags. I then tried to change smbios to mac pro 6,1. I tried removing generate p state and c state. I tried removing enbale C6. Still the same result. It is not working at all on my system. Link to comment Share on other sites More sharing options...
Rampage Dev Posted February 28, 2015 Share Posted February 28, 2015 See your messing with things. Please only use the Config on the DMG with the SSDT. Else you will create endless issues. Link to comment Share on other sites More sharing options...
onidemon Posted February 28, 2015 Share Posted February 28, 2015 See your messing with things. Please only use the Config on the DMG with the SSDT. Else you will create endless issues. I did. The only thing i changed like i said was to add boot flags which i need to boot into OSX other than that everything was untouched. But after it failed to work i went a tried to change something to see if it would improve but the result is the same. See your messing with things. Please only use the Config on the DMG with the SSDT. Else you will create endless issues. re-did the instructions in the OP for the fourth time and then i copied your config file the same way it was. Didn't even change the boot flags and still the same. http://pastebin.com/QWTjHjBC Config file, didnt touch 2015-02-27, 9:58:29 PM, Current State: 37 2015-02-27, 9:58:29 PM, P States: 37 2015-02-27, 9:58:22 PM, Current State: 37 2015-02-27, 9:58:22 PM, P States: 37 2015-02-27, 9:58:14 PM, Current State: 37 2015-02-27, 9:58:14 PM, P States: 37 2015-02-27, 9:58:06 PM, Current State: 37 2015-02-27, 9:58:06 PM, P States: 37 2015-02-27, 9:57:59 PM, Current State: 37 2015-02-27, 9:57:59 PM, P States: 37 2015-02-27, 9:57:52 PM, Current State: 37 2015-02-27, 9:57:52 PM, P States: 37 2015-02-27, 9:57:44 PM, Current State: 37 2015-02-27, 9:57:44 PM, P States: 37 2015-02-27, 9:57:36 PM, Current State: 37 2015-02-27, 9:57:36 PM, P States: 37 2015-02-27, 9:57:28 PM, Current State: 37 2015-02-27, 9:57:28 PM, P States: 37 2015-02-27, 9:57:20 PM, Current State: 37 2015-02-27, 9:57:20 PM, P States: 37 2015-02-27, 9:57:12 PM, Current State: 37 2015-02-27, 9:57:12 PM, P States: 37 2015-02-27, 9:57:04 PM, Current State: 37 2015-02-27, 9:57:04 PM, P States: 37 2015-02-27, 9:56:56 PM, Current State: 37 2015-02-27, 9:56:56 PM, P States: 37 2015-02-27, 9:56:48 PM, Current State: 37 2015-02-27, 9:56:48 PM, P States: 37 2015-02-27, 9:56:40 PM, Current State: 37 2015-02-27, 9:56:40 PM, P States: 37 2015-02-27, 9:56:32 PM, Current State: 37 2015-02-27, 9:56:32 PM, P States: 37 2015-02-27, 9:56:24 PM, Current State: 37 2015-02-27, 9:56:24 PM, P States: 37 2015-02-27, 9:56:16 PM, Current State: 37 2015-02-27, 9:56:16 PM, P States: 37 2015-02-27, 9:56:08 PM, Current State: 37 2015-02-27, 9:56:08 PM, P States: 37 2015-02-27, 9:56:00 PM, Current State: 37 2015-02-27, 9:56:00 PM, P States: 37 2015-02-27, 9:55:52 PM, Current State: 37 2015-02-27, 9:55:52 PM, P States: 37 2015-02-27, 9:55:44 PM, Current State: 37 2015-02-27, 9:55:44 PM, P States: 37 2015-02-27, 9:55:36 PM, Current State: 37 2015-02-27, 9:55:36 PM, P States: 37 Link to comment Share on other sites More sharing options...
stinga11 Posted February 28, 2015 Author Share Posted February 28, 2015 I did. The only thing i changed like i said was to add boot flags which i need to boot into OSX other than that everything was untouched. But after it failed to work i went a tried to change something to see if it would improve but the result is the same. re-did the instructions in the OP for the fourth time and then i copied your config file the same way it was. Didn't even change the boot flags and still the same. http://pastebin.com/QWTjHjBC Config file, didnt touch 2015-02-27, 9:58:29 PM, Current State: 37 2015-02-27, 9:58:29 PM, P States: 37 2015-02-27, 9:58:22 PM, Current State: 37 2015-02-27, 9:58:22 PM, P States: 37 2015-02-27, 9:58:14 PM, Current State: 37 2015-02-27, 9:58:14 PM, P States: 37 2015-02-27, 9:58:06 PM, Current State: 37 2015-02-27, 9:58:06 PM, P States: 37 2015-02-27, 9:57:59 PM, Current State: 37 2015-02-27, 9:57:59 PM, P States: 37 2015-02-27, 9:57:52 PM, Current State: 37 2015-02-27, 9:57:52 PM, P States: 37 2015-02-27, 9:57:44 PM, Current State: 37 2015-02-27, 9:57:44 PM, P States: 37 2015-02-27, 9:57:36 PM, Current State: 37 2015-02-27, 9:57:36 PM, P States: 37 2015-02-27, 9:57:28 PM, Current State: 37 2015-02-27, 9:57:28 PM, P States: 37 2015-02-27, 9:57:20 PM, Current State: 37 2015-02-27, 9:57:20 PM, P States: 37 2015-02-27, 9:57:12 PM, Current State: 37 2015-02-27, 9:57:12 PM, P States: 37 2015-02-27, 9:57:04 PM, Current State: 37 2015-02-27, 9:57:04 PM, P States: 37 2015-02-27, 9:56:56 PM, Current State: 37 2015-02-27, 9:56:56 PM, P States: 37 2015-02-27, 9:56:48 PM, Current State: 37 2015-02-27, 9:56:48 PM, P States: 37 2015-02-27, 9:56:40 PM, Current State: 37 2015-02-27, 9:56:40 PM, P States: 37 2015-02-27, 9:56:32 PM, Current State: 37 2015-02-27, 9:56:32 PM, P States: 37 2015-02-27, 9:56:24 PM, Current State: 37 2015-02-27, 9:56:24 PM, P States: 37 2015-02-27, 9:56:16 PM, Current State: 37 2015-02-27, 9:56:16 PM, P States: 37 2015-02-27, 9:56:08 PM, Current State: 37 2015-02-27, 9:56:08 PM, P States: 37 2015-02-27, 9:56:00 PM, Current State: 37 2015-02-27, 9:56:00 PM, P States: 37 2015-02-27, 9:55:52 PM, Current State: 37 2015-02-27, 9:55:52 PM, P States: 37 2015-02-27, 9:55:44 PM, Current State: 37 2015-02-27, 9:55:44 PM, P States: 37 2015-02-27, 9:55:36 PM, Current State: 37 2015-02-27, 9:55:36 PM, P States: 37 What is your motherboard Link to comment Share on other sites More sharing options...
onidemon Posted February 28, 2015 Share Posted February 28, 2015 What is your motherboard it's a generic HP/Intel board that comes with the HP Z420 desktop. http://www8.hp.com/ca/en/campaigns/workstations/z420.html Link to comment Share on other sites More sharing options...
stinga11 Posted February 28, 2015 Author Share Posted February 28, 2015 it's a generic HP/Intel board that comes with the HP Z420 desktop. http://www8.hp.com/ca/en/campaigns/workstations/z420.html you need MSR patcher 1 Link to comment Share on other sites More sharing options...
Recommended Posts