C.Frio Posted November 4, 2014 Share Posted November 4, 2014 hi..I have has well 4430 i5 ,have sandy bridge i3 2105 if well remember (sandy) an old i5 2400 and a a p55 with 7500 c.frio hi when with clover..does it will create a folder "10.10" or "other" under "kext"folder? c.frio Link to comment Share on other sites More sharing options...
Micky1979 Posted November 4, 2014 Author Share Posted November 4, 2014 when with clover..does it will create a folder "10.10" or "other" under "kext"folder? c.frio Yes. This is a point that I want to discuss here. The installer is only a installer, not the final OSX on the hard drive. If anyone has trouble this way, we can install all the kexts to /S/L/E... wait please... EDIT Uploading a new build.. Link to comment Share on other sites More sharing options...
C.Frio Posted November 4, 2014 Share Posted November 4, 2014 hi.. should be interesting if it create a folder "other" as clover read, that and put inside it only fake as default...for clover and for chameleon put all at s/l/e except the ones that goes to extra.. at least we all will have the last fake..with clover or chameleon...no more..."which is the last fake?" will download the last one now... c.frio Link to comment Share on other sites More sharing options...
Micky1979 Posted November 4, 2014 Author Share Posted November 4, 2014 New build at the first post, I think the bug is fixed... hi.. should be interesting if it create a folder "other" as clover read, that and put inside it only fake as default...for clover and for chameleon put all at s/l/e except the ones that goes to extra.. Making the installer for Chameleon the kexts are only installed to SLE (on the installer, on the Hard Drive only you decide where to install..). Yes, it's a good Idea.. for the FakeSMC, should be done....but the real point is only how to boot the installer. After when you are installing OSX you can or not install the bootloader (in the case you have it already installed), find wherever you've put a copy of your EFI folder (or the config.plist), because you can look where you've set aside using Zeus... and install this one. Probably not all is as users want... but they have a lot of options.. at least we all will have the last fake..with clover or chameleon...no more..."which is the last fake?" The FakeSMC.kext included is the latest rev.749 by Slice Another tip: Want Clover in Legacy mode???? Ok, build the installer with Ermes. Then use Zeus to install Clover in legacy mode targeting the "Pandora Installer"... Re-install the kexts too: Link to comment Share on other sites More sharing options...
C.Frio Posted November 4, 2014 Share Posted November 4, 2014 HiGreat..will try tomorrow .......I think legacy is an good entry level to clover....and fast to set as chameleonNot to much things to choose...good for noobs and lazy as me....C.frio edit: hi seam the Zeus is doing well( could’t use it ’till now), the problem is Hermes..it should prepare the installer with clover (legacy and UEFI) or chameleon.. seam to install ,clover is more universal ‘cause it can use DSDT mask to optimize the SMBIOS and others, so you can use it to install it in several machines instead to have to choose a specific model (14,2 5,1 so on) when using Enoch…clover is more "open"..more detected options and/ or permit to create the installer only doing the hard work to format,restore, copying base system and creating the basics folders for clover..”10.10” 10.9.. or “other” folder for clover and extra for chameleon, then IN Zeus choosing the boot loader from an external source , as we choose where the installer is..usually at “applications” ,so clover or chameleon could be at “desktop’ for example.. too much wishes hope not too confused or impossible things…my english is a kind of…. c.frio edit #2 hi I created an installer with enoch,resolution 1024x768x32 mac model imac 12,1… after it finished and watching inside the pen driver installer..I can’t find any boot file….only the EXTRA folder and all the others files from osx…the restored.. when try to install clover legacy ..choose the “boot0af” but the “start” icon is not highlighted … choose theme,typed all drivers..never the icon turn on c.frio 1 Link to comment Share on other sites More sharing options...
magnifico Posted November 5, 2014 Share Posted November 5, 2014 What game is it? No game, I'm trying, and I'm not playing for anything, I'm creating an installer so retail and I have that error, everything here Link to comment Share on other sites More sharing options...
Micky1979 Posted November 5, 2014 Author Share Posted November 5, 2014 @Mirone: great work! seam the Zeus is doing well( could’t use it ’till now) seam the Zeus is doing well( could’t use it ’till now), the problem is Hermes..it should prepare the installer with clover (legacy and UEFI) or chameleon.. seam to install ,clover is more universal ‘cause it can use DSDT mask to optimize the SMBIOS and others, so you can use it to install it in several machines instead to have to choose a specific model (14,2 5,1 so on) when using Two bootloader to boot the installer I thought they were already pretty . seam to install ,clover is more universal ‘cause it can use DSDT mask to optimize the SMBIOS and others, so you can use it to install it in several machines instead to have to choose a specific model (14,2 5,1 so on) when using Enoch…clover is more "open"..more detected options Enoch or Clover? is not a matter of taste. The same thing that you say about Clover, for many users is easier Chameleon. For example: I've Both Clover (UEFI mode) and Chameleon on my laptop. Everything works OK in both systems .. Clover is more advanced, no doubt ..is better! Clover in Legacy mode will not work on my laptop because it does not find my discs in any way. Maybe I'm doing something wrong (but I doubt). Clover in Legacy mode works really well on my two others Desktops System .. I actually thought that a user (personal taste, or rooting for a bootloader), what they want is to install OSX. Then all you can to move on. One thing is certain, Chameleon has been around for a long time and many people are prepared to help other people. That was my thought. and/ or permit to create the installer only doing the hard work to format,restore, copying base system and creating the basics folders for clover..”10.10” 10.9.. or “other” folder for clover and extra for chameleon, then IN Zeus choosing the boot loader from an external source , as we choose where the installer is..usually at “applications” ,so clover or chameleon could be at “desktop’ for example.. Soory can't understand this part... I created an installer with enoch,resolution 1024x768x32 mac model imac 12,1… after it finished and watching inside the pen driver installer..I can’t find any boot file….only the EXTRA folder and all the others files from osx…the restored.. when try to install clover legacy ..choose the “boot0af” but the “start” icon is not highlighted … choose theme,typed all drivers..never the icon turn on c.frio c.frio, I need for the "Hermes log"... is easy.. 1 Link to comment Share on other sites More sharing options...
C.Frio Posted November 5, 2014 Share Posted November 5, 2014 hi.. just made new pen with enoch,12,1 , it finished..at hermes log the first text that appears.. 11/5/14, 11:14 AM Running from OS X Version 10.9.2 (Build 13C64) Preparing Pandora's files.. Cleaning mount point from a previous execution the time is when it finish c.frio Link to comment Share on other sites More sharing options...
Mirone Posted November 5, 2014 Share Posted November 5, 2014 @c.frio Could test one of Applehda's? Link to comment Share on other sites More sharing options...
C.Frio Posted November 5, 2014 Share Posted November 5, 2014 hi Mirone... on which codec..'cause I use voodoo and have my applehda all removed...is it a "ready".like "plug and play" and does not use DSDT... if you drive me.. but I'm leaving in some moments, but as soon as came back will read the post.. c.frio Link to comment Share on other sites More sharing options...
magnifico Posted November 5, 2014 Share Posted November 5, 2014 unsubscribe Thank you for your work Bye Link to comment Share on other sites More sharing options...
Micky1979 Posted November 5, 2014 Author Share Posted November 5, 2014 hi.. just made new pen with enoch,12,1 , it finished..at hermes log the first text that appears.. 11/5/14, 11:14 AM Running from OS X Version 10.9.2 (Build 13C64) Preparing Pandora's files.. Cleaning mount point from a previous execution the time is when it finish c.frio c.frio, but is really hard to have a log? pleeease #24 Link to comment Share on other sites More sharing options...
C.Frio Posted November 5, 2014 Share Posted November 5, 2014 hi.. that is all I get at "hermes log "when instal with Enoch "just made new pen with enoch,12,1 , it finished..at hermes log the first text that appears.." "11/5/14, 11:14 AM Running from OS X Version 10.9.2 (Build 13C64) Preparing Pandora's files.. Cleaning mount point from a previous execution" c.frio edit..tried to prepare a pen choosing clover the hermes log is too big to send even zip... will try with dropbox https://www.dropbox.com/s/fy07ipvxtglyu59/PandoraMaker.log.zip?dl=0 https://www.dropbox.com/s/91z6hvtj5s778ds/Screen%20Shot%202014-11-05%20at%205.40.27%20PM.png?dl=0 Link to comment Share on other sites More sharing options...
Micky1979 Posted November 5, 2014 Author Share Posted November 5, 2014 mine is as is: 04/11/14 21:57 Running from OS X Version 10.9.5 (Build 13F34) Preparing Pandora's files.. Cleaning mount point from a previous execution Showing all current Setting: App Version: v2.005 Device Type: 1 OS Type: 2 Configuration Type: 2 Resolution: Not Define Mac Model: Not Define Bootloader: 2 Custom Config: 1 Custom EFI: 0 Driver CsmVideoDxe64: 0 Driver DataHubDxe64: 0 Driver EmuVariableUefi64: 0 Driver OsxAptioFixDrv64: 0 Driver OsxLowMemFixDrv64: 1 Driver PartitionDxe64: 1 Driver HFS Plus 64: 0 Driver NTFS 64: 0 Custom Extra: 0 Custom Kexts: 0 Custom Kernel: 0 Acpi: 0 DMGApp Path: /Volumes/DATI/Install OS X Mavericks.app Target Device: disk2s2 Target Device Name: Pandora Installer Looking inside InsanelyBox/Custom EFI for the provided config.plist.. Preparing the UEFI driver(s) Chosen Custom config.plist prepared for the restore! Chosen UEFI driver(s) prepared for the restore! Mounting Install OS X Mavericks.app /dev/disk3 Apple_partition_scheme /dev/disk3s1 Apple_partition_map /dev/disk3s2 Apple_HFS Baselioninst The main image is mounted! Checking now for the OS X version.. OS X 10.9 build 13A603 detected! /dev/disk4 Apple_partition_scheme /dev/disk4s1 Apple_partition_map /dev/disk4s2 Apple_HFS basesystem Found System ID 'EE' to identify GPT Partition Found System ID '00' for each remaining possible partition Good, found a pure GPT partition table, continuing.. 8+0 records in 8+0 records out 8 bytes transferred in 0.003423 secs (2337 bytes/sec) Bingo, EFI is FAT32 formatted! :-) Erasing the target Volume.. Started erase on disk2s2 Pandora Installer Unmounting disk Erasing Initialized /dev/rdisk2s2 as a 7 GB case-insensitive HFS Plus volume Mounting disk Restoring BaseSystem.dmg.. Finished erase on disk2s2 PandoraMEM Validating target...done Validating source...done Retrieving scan information...done Validating sizes...done Restoring ....10....20....30....40....50....60....70....80....90....100 Remounting target volume...done Volume on disk2s2 renamed to Pandora Installer Restoring Packages.. building file list ... 0 files... 17 files to consider Packages/ Packages/AdditionalEssentials.pkg 94456030 100% 14.44MB/s 0:00:06 (xfer#1, to-check=15/17) Packages/AdditionalSpeechVoices.pkg 434183028 100% 16.51MB/s 0:00:25 (xfer#2, to-check=14/17) Packages/AsianLanguagesSupport.pkg 1102405 100% 1005.20kB/s 0:00:01 (xfer#3, to-check=13/17) Packages/BSD.pkg 304906240 99% 17.22MB/s 0:00:00 304995540 100% 17.03MB/s 0:00:17 (xfer#4, to-check=12/17) Packages/BaseSystemBinaries.pkg 281410906 100% 16.61MB/s 0:00:16 (xfer#5, to-check=11/17) Packages/BaseSystemResources.pkg 2284277 100% 11.00MB/s 0:00:00 (xfer#6, to-check=10/17) Packages/Essentials.pkg 3191643424 100% 16.73MB/s 0:03:01 (xfer#7, to-check=9/17) Packages/InstallableMachines.plist 2613 100% 4.12kB/s 0:00:00 2613 100% 4.12kB/s 0:00:00 (xfer#8, to-check=8/17) Packages/JavaEssentials.pkg 2472385 100% 3.09MB/s 0:00:00 (xfer#9, to-check=7/17) Packages/JavaTools.pkg 20686 100% 26.24kB/s 0:00:00 20686 100% 26.24kB/s 0:00:00 (xfer#10, to-check=6/17) Packages/MediaFiles.pkg 345478377 100% 16.14MB/s 0:00:20 (xfer#11, to-check=5/17) Packages/OSInstall.mpkg 727986 100% 1.83MB/s 0:00:00 (xfer#12, to-check=4/17) Packages/OSInstall.pkg 2254 100% 5.40kB/s 0:00:00 2254 100% 5.40kB/s 0:00:00 (xfer#13, to-check=3/17) Packages/OSUpgrade.pkg 839 100% 2.01kB/s 0:00:00 839 100% 2.01kB/s 0:00:00 (xfer#14, to-check=2/17) Packages/OxfordDictionaries.pkg 140468300 100% 15.70MB/s 0:00:08 (xfer#15, to-check=1/17) Packages/X11redirect.pkg 581484 100% 994.49kB/s 0:00:00 (xfer#16, to-check=0/17) Customizing installation.. Decompriming BaseSystemBinaries.pkg to find the Mavericks mach_kernel inside its Payload sent 4800417645 bytes received 378 bytes 17424384.84 bytes/sec total size is 4799830534 speedup is 1.00 The package is expanded, now extracting the mach_kernel, be patient mach_kernel extracted! Installing the kexts for the selected configuration.. Extra folder is in place. Copying the ACPI tables... Copying the EFI folder... Copying me (take a long..) =============================================== Trying to patch AppleRTC.kext: RTC Succesfully patched: 1 substitution made. =============================================== Installing Clover on /dev/disk2s1 revision 2976 Mounting EFI partition.. EFI partition is mounted! Copying the EFI folder.. EFI folder has been copied successfully Unmounting EFI.. MBR patch applied for OS X 10.9.. Preocess started at 04/11/14 21:57 Process finished at 04/11/14 22:08 Pandora has completed all operations  Link to comment Share on other sites More sharing options...
C.Frio Posted November 5, 2014 Share Posted November 5, 2014 hi when you have time ,describe your steps and your chooses.. I have no idea how to turn around my issues... I'm trying to make a yosemite install,don't know if it is trying to create de 10.10 folder may because gives kext error.see pict.. c.frio Link to comment Share on other sites More sharing options...
Micky1979 Posted November 5, 2014 Author Share Posted November 5, 2014 hi.. that is all I get at "hermes log "when instal with Enoch "just made new pen with enoch,12,1 , it finished..at hermes log the first text that appears.." "11/5/14, 11:14 AM Running from OS X Version 10.9.2 (Build 13C64) Preparing Pandora's files.. Cleaning mount point from a previous execution" c.frio edit..tried to prepare a pen choosing clover the hermes log is too big to send even zip... will try with dropbox https://www.dropbox.com/s/fy07ipvxtglyu59/PandoraMaker.log.zip?dl=0 https://www.dropbox.com/s/91z6hvtj5s778ds/Screen%20Shot%202014-11-05%20at%205.40.27%20PM.png?dl=0 App Version: v2.002 This app is old, redownload the new one.. EDIT I'm making modification: Use "Custom EFI" without the need to select additional drivers. After this only you are responsible to install kexts inside "Your" EFI folder.. Is ok?? Link to comment Share on other sites More sharing options...
C.Frio Posted November 5, 2014 Share Posted November 5, 2014 hi with this new version 007 the process was completed with clover...ok picture of what choose https://www.dropbox.com/s/9u7vejy2etmjc8l/Screen%20Shot%202014-11-05%20at%207.48.55%20PM.png?dl=0 now will look inside to see...and will edit no boot file or efi folder...shal I have to mount it? c.frio I'm having brownouts..will wait to stabilize Link to comment Share on other sites More sharing options...
Micky1979 Posted November 5, 2014 Author Share Posted November 5, 2014 (edited) UEFI only making The installer.Is a ProoBook that You want to boot?If yes, Can boot in UEFI mode...no?? The EFI folder is inside the EFI partition. You can mount it using Zeus (under Maintenace -> "Mount the ESP(s)") Edited January 23, 2015 by Micky1979 Hermes now install Legacy Clover too Link to comment Share on other sites More sharing options...
C.Frio Posted November 6, 2014 Share Posted November 6, 2014 hi... no ....no..I want something (as was first pandora) that gives me room to boot in "almost" (mean some )desktop at least... Not prepare an installer for a specific motherboard and video and processor...I mean the minimum of minimum to install osx on different desktops... and if it will work after is another issue..see..I have ga p55,ga z77 ga87,ga h61,foxconn h61,as rock h87,as rock z77.....asrock h61 so... "UEFI only making The installer."... as I want to install legacy..I will do it (install clover legacy) trough Zeus.. this way I think ,that I can reach a way to prepare and put clover legacy on "pandora installer" to boot to make install "The EFI folder is inside the EFI partition. You can mount it using Zeus (under Maintenace -> "Mount the ESP(s)")" Ok...I'll look for......tks ....as soon as my energy issues are solve.... c.frio Link to comment Share on other sites More sharing options...
Onixs Posted November 6, 2014 Share Posted November 6, 2014 @Micky1979 iirc, you mentioned that you will fix Andy's getcodecid to get rid of autorelease pool error by moving the @autoreleasepool? Link to comment Share on other sites More sharing options...
Micky1979 Posted November 6, 2014 Author Share Posted November 6, 2014 @Micky1979 iirc, you mentioned that you will fix Andy's getcodecid to get rid of autorelease pool error by moving the @autoreleasepool? Sure, it was only a small oversight by AnV: the @autoreleasepool must be before the NSMutableArray, ie it must includes also it ...and it can work in Snow, Lion, ML, Mavericks and Yosemite but targeting Lion as "depolyment target" hi... no ....no..I want something (as was first pandora) that gives me room to boot in "almost" (mean some )desktop at least... Not prepare an installer for a specific motherboard and video and processor...I mean the minimum of minimum to install osx on different desktops... and if it will work after is another issue..see..I have ga p55,ga z77 ga87,ga h61,foxconn h61,as rock h87,as rock z77.....asrock h61 so... "UEFI only making The installer."... as I want to install legacy..I will do it (install clover legacy) trough Zeus.. this way I think ,that I can reach a way to prepare and put clover legacy on "pandora installer" to boot to make install "The EFI folder is inside the EFI partition. You can mount it using Zeus (under Maintenace -> "Mount the ESP(s)")" Ok...I'll look for......tks ....as soon as my energy issues are solve.... c.frio Finally we focus on the point: If you are able to start your mobos with only one configuration.... sure you are very and only lucky, because Instead many people possess their custom configurations, also deeply: Clover give you the oppurtunity to install inside the EFI folder very different configuration (different config.plist, different kexts and so on). All in one EFI folder. On my part the error was only that you don't need to install additional kexts to enable the installation of your customized EFI folder because if you want that... you must include also the extensions you want. Only. I'm working to modify that! Consider that installing OSX using Zeus at certain point you probably want to install the final EFI folder (not just for having booted the installer ..clarifying). So what will want is to include the final one to be copied because that was already copied by Hermes inside the InsanelyBox folder (in the root of the installer), and Zeus will be able to find it easily. Obviously, you can search wherever you want, even if it is in another disk, where a sub folder..o to think, because you can also browse disks and folders during the installation of OSX: Link to comment Share on other sites More sharing options...
C.Frio Posted November 6, 2014 Share Posted November 6, 2014 hi... @Micky1979... hi...thank you for the fast clarification..will read carefully...english issues.. does it inject "kext-dev-mode=1" during the clover install?..efi or uefi or legacy?.at any time? the goal of the idea in..mine too...is from @chris1111 "Your not install clover, your install OS X Yosemite with this clover installer Instaler is on Legacy for working with UEFI PC and Legacy PC " tks for your patience.. "let's roll" c.frio Link to comment Share on other sites More sharing options...
Micky1979 Posted November 6, 2014 Author Share Posted November 6, 2014 For Mirone: ALC887VD (layout-id 3 Desktop's version) by Mirone, downloaded and installed using Zeus hi... @Micky1979... hi...thank you for the fast clarification..will read carefully...english issues.. does it inject "kext-dev-mode=1" during the clover install?..efi or uefi or legacy?.at any time? the goal of the idea in..mine too...is from @chris1111 "Your not install clover, your install OS X Yosemite with this clover installer Instaler is on Legacy for working with UEFI PC and Legacy PC " tks for your patience.. "let's roll" c.frio Never I add kernel Flags if user does not want. Installer made by Hermes is modified to start Zeus, but each file is original by Apple and the installed OSX will always be vanilla. Only users decide what to change! // ---------------------------------------------------------------------------------------------------------------------------------------------------------> Guys, tests suspended: I have to change profoundly Hermes by removing the "Retail options", in its place there will be "FakeSMC only" This will require until tomorrow.. test re-opened! Micky 2 Link to comment Share on other sites More sharing options...
Mirone Posted November 6, 2014 Share Posted November 6, 2014 Thank You!!! 1 Link to comment Share on other sites More sharing options...
carlo_67 Posted November 9, 2014 Share Posted November 9, 2014 sorry for the English language I'm trying Pandora 2 (Hermes) with Yosemite AMD I wanted to tell you that I created the usb istaller perfectly Place the kernels in S / L / K / k and is well recognized Now I have problems with the installation, but that's another fact Great job guys 1 Link to comment Share on other sites More sharing options...
Recommended Posts