gils83 Posted April 22, 2015 Share Posted April 22, 2015 le moins que l'on puisse dire est que le K10 se porte vraiment bien avec le kernel Bronya , la compétition est ouverte entre Bronya et Tora Chi Yo toute fois même avec l'émulteur ssse3 , certaine appli comme SreenFlow , le manque physique de cette instruction se fait sentir et fait défaut comparé aux cpu qui en sont équipé , AES qui n'est pas négligeable fait également défaut pour optimiser les performances , qui se traduit par un manque de fluidité vidéo même si les chiffres sont très bon . Dans tout les cas , il y a vraiment un travail remarquable de nos impressionnants coders encore merci à eux dans le cadre du test , j'ai tout simplement utilisé le HDD de mon kabini 5350 et ce bon vieux x2 555 unlocké en x4 qui nous fait un jolie x4 B55 alias x4 955 le résultat opengl (HD 6670) étant de base de 50 fps avec mon Xeon o/c à 3,6 ivybridge 22nm arrive à 45 fps avec le phenom à 3,2 , c'est vraiment bon , le test opencl est très impressionnant car en dessous de 200 fps avec le Xeon et 180 fps avec kabini que du bon tout ça !! et que ça dure ............ the least that can be said is that the K10 is doing really well with the kernel Bronya, the competition is open between Bronya and Tora Chi Yo any time even with SSSE3 émulteur, some app like SreenFlow, physical lack of this instruction is felt and lacking compared to cpu that are equipped, AES is significant also lacking to optimize performance, which results in a lack of fluidity video even if the numbers are very good. In any case, there really is a remarkable work of our coders awesome again thank you to them in the test, I simply used my HDD Kabini 5350 and the good old 555 x2 x4 unlocké that makes us a pretty x4 x4 B55 aka 955 the opengl result (HD 6670) is based 50 fps with my Xeon o/c 3.6 ivybridge 22nm reaches 45 fps with the phenom 3.2, this is really good, the OpenCL test is very impressive as below 200 fps and 180 fps Xeon with Kabini that all that good !! and it lasts ............ test_phenom.zip 1 Link to comment Share on other sites More sharing options...
pico joe Posted April 22, 2015 Share Posted April 22, 2015 Is there any existing compile the new kernel from new source ?? .. the sites is already to be downloaded http://www.opensource.apple.com/release/os-x-10101/ Link to comment Share on other sites More sharing options...
Andy Vandijck Posted April 22, 2015 Share Posted April 22, 2015 Is there any existing compile the new kernel from new source ?? .. the sites is already to be downloaded http://www.opensource.apple.com/release/os-x-10101/ No new XNU available... Only the dark blue sources are new thus (a very unimpressive): - WebCore-7600.1.25.2 Only renewal in 10.10.1 qua open source... Also Core Foudation (CF) is not yet uploaded... Bloody Apple... putting the link on the site here: http://www.opensource.apple.com/source/CF/CF-1151.16/ But! Apple Open Source Error! error message Please report the missing source or broken link to opensource@apple.com Visit the Apple Store online (1-800-MY-APPLE), find a retail location or find a reseller. Contact Us | Mailing Lists Copyright © 2010 Apple Inc. All rights reserved. Terms of Use | Privacy Policy Apple is losing it's touch... Ever since Tim Cook admitted he is G.A.Y. he is acting crazy! Goddamn... I miss Steve Jobs, he at least liked women and knew how to impress a crowd... 4 Link to comment Share on other sites More sharing options...
joe75 Posted April 22, 2015 Share Posted April 22, 2015 epic! 1 Link to comment Share on other sites More sharing options...
Stefe Hobs Posted April 26, 2015 Share Posted April 26, 2015 Ever since Tim Cook admitted he is G.A.Y. he is acting crazy! thats really not the apple-problem mate 2 Link to comment Share on other sites More sharing options...
gils83 Posted April 27, 2015 Share Posted April 27, 2015 off topic, the Cook sexel life, it will be a little pat see lots 1 Link to comment Share on other sites More sharing options...
o0obenjio0o Posted April 30, 2015 Share Posted April 30, 2015 Would like to say Thanks guys for making this Kernel. i am on Yosemite 10.10.1, Tried to transfer my iCloud but that didnt work. Everything else works fine had no issue even played some Empire Total War with no issues. Asus M4A79XTD AMD Phemon II Quad Core 3.2Ghz8GB DDR3 1333 RAMATI HD5770 1GB DDR5 Graphics Card (Flashed Bios to work out of box)MSI HD6770 1GB DDR5 Graphics Card Link to comment Share on other sites More sharing options...
yakei Posted April 30, 2015 Share Posted April 30, 2015 under Intel (Hashwell system , Intel HD 4400) the problem steps on that safari with plays a Youtube video into full opinion,Yosemite 10.10.3 logs out them selves, is this problem also with AMD with Nvidia card well-known with 10.10.3? Use presently still 10.10.1 and would like just to update. Link to comment Share on other sites More sharing options...
Kaya80 Posted April 30, 2015 Share Posted April 30, 2015 Sorry guys, regarding the update to 10.10.3 and the hardware, does everyone needs to install all kexts in the package of gils, independently from hardware specs?I don't want to do a disaster, because i dont want to reinstall the system again from the beginning Link to comment Share on other sites More sharing options...
lpukraine Posted April 30, 2015 Share Posted April 30, 2015 Sorry guys, regarding the update to 10.10.3 and the hardware, does everyone needs to install all kexts in the package of gils, independently from hardware specs?I don't want to do a disaster, because i dont want to reinstall the system again from the beginningOn my hardware I only replace kernel and phtread.kext after every update 10.10.1-10.10.3. Did not use gils package. 1 Link to comment Share on other sites More sharing options...
Kaya80 Posted April 30, 2015 Share Posted April 30, 2015 Thank you very much...try this night to update, i'm so afraid XDXD Link to comment Share on other sites More sharing options...
lpukraine Posted April 30, 2015 Share Posted April 30, 2015 Thank you very much...try this night to update, i'm so afraid XDXDEverything may happens. You have to be ready to reinstall if somethings go wrong. I always install updates via App Store)) Link to comment Share on other sites More sharing options...
gils83 Posted April 30, 2015 Share Posted April 30, 2015 Sorry guys, regarding the update to 10.10.3 and the hardware, does everyone needs to install all kexts in the package of gils, independently from hardware specs?I don't want to do a disaster, because i dont want to reinstall the system again from the beginning you would not make any catastrophe, this package concern in particular the recent UEFI motherboards if you have any doubt put aside kexts vanilla before replacing them, you will always have a way to go back. 2 Link to comment Share on other sites More sharing options...
WellCze Posted May 2, 2015 Share Posted May 2, 2015 Hello, after months of work i made it and everything works including icloud using the migration tool, so amazing Only thing is that my score on CPU is real bad.. included in picture. The GPU power is nice, but the cpu is worse than my i5 1,3Ghz macbook air. Any tips on this? Im using the bronya kernel. Also thanks everyone for this amazing job. Link to comment Share on other sites More sharing options...
gils83 Posted May 2, 2015 Share Posted May 2, 2015 Link to comment Share on other sites More sharing options...
WellCze Posted May 3, 2015 Share Posted May 3, 2015 ahh tell me your secrets you lucky little bad boy! Link to comment Share on other sites More sharing options...
gils83 Posted May 3, 2015 Share Posted May 3, 2015 ahh tell me your secrets you lucky little bad boy! test_phenom.zip Link to comment Share on other sites More sharing options...
WellCze Posted May 3, 2015 Share Posted May 3, 2015 test_phenom.zip thanks, nice video. unfortunately not helped me much, i have most of the things similar to you, i use chameleon and not efi clover though. I guess the 960T is just lazy in osx :-/ Link to comment Share on other sites More sharing options...
gils83 Posted May 3, 2015 Share Posted May 3, 2015 thanks, nice video. unfortunately not helped me much, i have most of the things similar to you, i use chameleon and not efi clover though. I guess the 960T is just lazy in osx :-/ unlock x6 Link to comment Share on other sites More sharing options...
gils83 Posted May 3, 2015 Share Posted May 3, 2015 replace kernel.zip 1 Link to comment Share on other sites More sharing options...
gils83 Posted May 3, 2015 Share Posted May 3, 2015 Tried to upgrade to 10.10.3 from Niresh 10.10.1 with AppStore and zip from gils83 14d131.zip After I've updated the OS X, booted to another OS X and replaced the kexts and kernel. Booted to that updated system and tried via kextwizard to fix the permissions - that took about 15 minutes (my specs are in my signature) Trying to boot with clover gives - invalid permissions, omitting - sandbox bootloop IMG_20150503_180137.jpgIMG_20150503_180152.jpgIMG_20150503_214904.jpg sorry for the dusty screen I've also tried to fix the permissions manually via single mod to 775 and root:wheel - did not help at all I'm using clover 3193, 10.10.1 (niresh) works very good under uefi boot the monitor is dusty !! but boot with chameleon -f -v 1 Link to comment Share on other sites More sharing options...
gils83 Posted May 4, 2015 Share Posted May 4, 2015 Clover is not able to start without kernelcache, autirasation repairs S/L/E are not enough, we must also rebuild the system cache (including kernelcache once one is on functional Yosemite), chameleon lets you start without kernelcache with the -f flag or UseKernelCache=No, I mentioned at least 100 times! once on the desktop using chameleon, you must rebuild the cache system using kextwizard then you could start normally with Clover . Link to comment Share on other sites More sharing options...
Kaya80 Posted May 4, 2015 Share Posted May 4, 2015 Sorry for the wrong post.....was only interested on how to solve my opcode error if possible Link to comment Share on other sites More sharing options...
gils83 Posted May 5, 2015 Share Posted May 5, 2015 Stuck with grey screen with -f usually means system is unable to boot Yosemite without cache. I think only Clover can do that. Please move your issue(s) to the help topic, this is the kernel testing reporting thread. oui aussi , ce n'est pas faut Link to comment Share on other sites More sharing options...
Kaya80 Posted May 6, 2015 Share Posted May 6, 2015 Does the rev. 8N could solve my Opcode error on Phenom II 1090T? I'm on 10.10.3 Link to comment Share on other sites More sharing options...
Recommended Posts