Jump to content

[AMD] Yosemite Kernel Testing (for help use the Help Topic)


Duran Keeley
 Share

1,898 posts in this topic

Recommended Posts

Safari Preview Webkit / avatars on websites / wrongs colors in Google Chrome......

 

Solution:   simply the file  ImageIO.Framework and preview app from 10.9.5 to 10.10.1, system cache renew ,

picture Preview in Safari are now ok.   :rolleyes:

I hope that this information with all arrived.

 

Andy, Bronya and 虎千代

ist it to be compensated possible this error / expenditure also in the kernel?

 

many thanks

can you upload here these files from 10.9.5 for your solution?

Link to comment
Share on other sites

 

1010-SSEPlus Rev 2

 
fetchoperands 32/64 bit Mem PTR All Fix done
 
The remaining question in SSEX instructions implementation
 
Current OPEMU & SSEPlus instructions implementation not entirely correct

 

 

Thank you for your great adjustment of the kernel, naturally also thanks at Andy and Bronya without it a new Yosemite kernel would have never given.  :yes:  :thumbsup_anim:

 

I hope that it also further AMD topic accompanied. :yes:  :P

 

New challenge:

 

does this Kernel function now with 10.10.3 ?

 

  • Like 2
Link to comment
Share on other sites

Thank you for your great adjustment of the kernel, naturally also thanks at Andy and Bronya without it a new Yosemite kernel would have never given.  :yes:  :thumbsup_anim:

 

I hope that it also further AMD topic accompanied. :yes:  :P

 

New challenge:

 

does this Kernel function now with 10.10.2 ?

 

This kernel does not support 10.10.2.

In this post, Carlo_67 wrote about method how to get working 10.10.2 with this kernel.

  • Like 1
Link to comment
Share on other sites

stop, it is old , we need a solution for 10.10.3 Dev Build 14D72i.  :drool: 

No offense but push Apple to release the 10.10.2 sources.

They'll work for 10.10.3, just see in the past to any version of OS X...

10.10.1: No new kernel (just like 10.8.1/10.9.1/etc...).

Apple does changes starting with 10.10.2.

  • Like 2
Link to comment
Share on other sites

which files from os 10.10.1 i may replace for work my os 10.10.2?

I'm going to take an educated guess here:

- System.kext

- Sandbox.kext

Then it should work...

  • Like 3
Link to comment
Share on other sites

@Andy

certainly so, to me it was enough to put the contents of the extensions overwriting the new and old, and I reciprocated and IOPCIFamily AppleACPIPlattafor and is the distributed system running smoothly
 
however sistem.kext and sandbox has overwritten
see the date
compliments to the kernel
you are very good :yes:  :yes:  :yes:
Link to comment
Share on other sites

Hi ! 
I modified my opemu without SSEPlus and working ))) .

 

But i watching problem bug glitches in avatar safari in only Yosemite ! Maybe problem in fetchoperands this mod .
This beta version . In archive include opemu files :) . Full diff file tomorrow .
I make kernels for 10.9.5 and 10.10 ! 
Try please !
 
 
Soon for 10.7.5 and 10.8.5 ! 
  • Like 8
Link to comment
Share on other sites

^

 

Kernel boots :)

Screenshots work

No problems with graphics on desktop

Opening files and folders by clicking on icons works

Safari and App Store work fine

Problems with avatars still present

 

Basically, all the same as with Rev.2

 

EDIT: Rev.2 appears to be slightly faster in doing some basic tasks such as opening programs and loading items and desktop backgrounds in System Preferences. At least it's my impression...

Link to comment
Share on other sites

Sorry I'm new to yosemite, but there is something useful i have found that may help and hackintoshers solve the annoying audio shuttering problem 
 
EXPECTED PROBLEM : DRIVERS  :P 

ACTUAL PROBLEM : CPU SPEED DETECTED SLIGHTLY WRONG BY ENOCH/CHAMELEON (COLVER DOES NOT WORK FOR ME), only works when oc'ed  :thumbsup_anim: 
      
after a lot of trial and error i realised that audio worked differently after every boot, then i realised from the console that it was a slightly wrong speed detection by the boot loader and manually setting if right .... using obviously (bus ratio = xx)

CAUTION

DONT PUT A EXTREMELY LOWER VALUE, does not boot

HIGHER VALUE, audio loss and horrible sound
DONT PUT THE CORRECT VALUE(FROM THE BIOS ITSELF, multiplier in bios is different than what OS X needs, for intel reasons)

HOW I DID IT (always boot using -v{for obvious reasons})

1) overclock and boot up the os x
2) occasionally sound will be right 
3) when its working fine, open console and type fsb, set your busratio to the latest boot record 
4) works like a charm

THANK YOU SO MUCH FOR ALL THE EFFORTS BY ANDY, BRONYA, 虎千代 .... using sseplus v2 by the gentleman 
Tiger Chiy"Tiger Chiyoda"{if its right}

will now test bronya's latest rc 4 

ABOBE PHOTOSHOP CC, AFTER EFFECTS CC 2014, ANIME STUDIO PRO 9.5, XCODE6(latest), etc working perfect 
 

  • Like 2
Link to comment
Share on other sites

Sorry, 

 

You need to use "Console"

my fault....another question, how to set bus ratio in console??Sorry, but never used before.I've not so much hopes, 'cause the cracking, after some seconds of play, stops the audio at all, no chance to hear anything, have to reboot

 

No chance absolutely, the audio is cracking like the Grudge every single second, absolutely scandalous, OC my 1090T to x18, 3600mhz, i think it's quite good, but it seems to get the things worse

Link to comment
Share on other sites

Sorry, 

 

my fault....another question, how to set bus ratio in console??Sorry, but never used before.I've not so much hopes, 'cause the cracking, after some seconds of play, stops the audio at all, no chance to hear anything, have to reboot

 

No chance absolutely, the audio is cracking like the Grudge every single second, absolutely scandalous, OC my 1090T to x18, 3600mhz, i think it's quite good, but it seems to get the things worse

 

busratio=18 fsb=200 Mhz ;)  no cracking 

 

C1E disable and cool n'quiet disable ;) 

  • Like 1
Link to comment
Share on other sites

 

Hi ! 
I modified my opemu without SSEPlus and working ))) .

 

But i watching problem bug glitches in avatar safari in only Yosemite ! Maybe problem in fetchoperands this mod .
This beta version . In archive include opemu files :) . Full diff file tomorrow .
I make kernels for 10.9.5 and 10.10 ! 
Try please !
 
 
Soon for 10.7.5 and 10.8.5 ! 

 

@Bronya

 

Excellent this kernel fbs the graphics go a bomb

Schermata 2015-02-06 alle 20.14.48.png

  • Like 2
Link to comment
Share on other sites

With 1010-SSEPlus-Rev.2 kernel:

 

  • System performance is extremely good, but boot time is a bit slower than on Mavericks
  • Safari works, but avatar glitches. With Chrome Canary no bugs
  • Desktop and launchpad colors are perfect
  • Login screen is still pink
  • AppStore works fine
  • in System Settings opening and element is a bit laggier compared to Mavericks
  • Screenshot is working fine
  • Even my old IDE DVD-drive works with AppleATiATA.kext

Found a glitch: in Finder if I click on full-screen view, the opening animation is a bit weird with black background. Everywhere else it's okay.

  • Like 1
Link to comment
Share on other sites

 Share

×
×
  • Create New...