J0hny Posted August 9, 2015 Share Posted August 9, 2015 (edited) @ImmortalSoulL here writes Bronya "....This kernel rc7 read busFreq from only bootloader! In trap.c delete "invalid RDMSR" and implement in opemu.c! Chameleon bootloader version in 2594! ..." I'm assuming that was all displayed correctly with kernel rc7. only he can tell us how did he do that exactly. I was for long time not present here, and have unfortunately missed the changes. but the problems that you have, I can not recognize at my hackintosh. No problem. Thank you for your time to check this!) And I know about read BusFreq from bootloader, I also was testing that. I can tell you more, with clover and rc7 kernel, you can write BusFreq and CPUFreq in clover config by yourself, it will read correctly even with clover. But I think you already know that.) Well then let's wait for Bronya.) update: I think I've found the solution for this issue, the multiplier was dropping as I suppose because of amd cool&quiet technology. Everyone knows, that this is energy saving technology, which changes your multiplier and voltage depending on how much system is loaded. Of course in mac os x this technology is not working, but when system is not loaded yet by bootloader, or when system only beginning to load - it can functioning, and when kernel calculating multiplier, it can catch wrong multiplier I think, but it’s only suggestion. So if everyone had the same issue, you should switch this in bios to "Auto", or better like in my case just disable it! Edited August 10, 2015 by ImmortalSoulL 1 Link to comment Share on other sites More sharing options...
spakk Posted August 11, 2015 Share Posted August 11, 2015 (edited) No problem. Thank you for your time to check this!) And I know about read BusFreq from bootloader, I also was testing that. I can tell you more, with clover and rc7 kernel, you can write BusFreq and CPUFreq in clover config by yourself, it will read correctly even with clover. But I think you already know that.) Well then let's wait for Bronya.) update: I think I've found the solution for this issue, the multiplier was dropping as I suppose because of amd cool&quiet technology. Everyone knows, that this is energy saving technology, which changes your multiplier and voltage depending on how much system is loaded. Of course in mac os x this technology is not working, but when system is not loaded yet by bootloader, or when system only beginning to load - it can functioning, and when kernel calculating multiplier, it can catch wrong multiplier I think, but it’s only suggestion. So if everyone had the same issue, you should switch this in bios to "Auto", or better like in my case just disable it! Please to look at this process with Build 14F22a just as an experiment. The adjustments to Build 14F19a runs so far fine. I must correct myself and apologize. Something is wrong with the changes/transfer after of the /usr/ folder contents from Build 14F19a to build 14F22a. it is noticed only now that the information Core Speed, Multiplier, Bus Speed, and Rated FSB are displayed incorrectly, but this has nothing to do with the kernel, because the same kernel is displayed everything correctly under Build 14F19a...we need to check what may be the cause. probably is something absolutely necessary from the folder /usr/ from Build 14F22a? I dont know..... Edit: I very much apologize for ..., it was my mistake ... another kernel was the cause! The above experiment will be adjusted at the latest when a new xnu source is published by Apple, presumably. or someone will find a good solution to this problem? Edited August 11, 2015 by spakk 1 Link to comment Share on other sites More sharing options...
spakk Posted August 12, 2015 Share Posted August 12, 2015 my research in relation to the problem of freeze / crash your gtx 760 graphics card, did not return anything positive. see google link. a user meant to mitigate the problem by another smbios.plist from IMac13,1. but the problems remain. I think that you can prevent long term the problem with an other osx compatible graphics card. https://www.google.de/search?q=NVDA%3A+Can+make+to+context+residence+before+adding+drawable+channel!&oq=nvda%3A+can+make+to+context+residence+before+adding+drawable+channel!&aqs=chrome.0.69i59j69i58.2127j0j4&client=ms-android-tmobile-de&sourceid=chrome-mobile&espvd=1&ie=UTF-8 Link to comment Share on other sites More sharing options...
lpukraine Posted August 14, 2015 Share Posted August 14, 2015 Anyone try to update to 10.10.5? Link to comment Share on other sites More sharing options...
spakk Posted August 14, 2015 Share Posted August 14, 2015 Anyone try to update to 10.10.5? 10.10.5 should be treated with caution, as already have described my experience. at the penultimate Build 14F19a with adjustments, see the article, the system is still running reliably. with the right kernel: http://www.insanelymac.com/forum/files/file/446-amd-kernel-yosemite-10102-sseplus/ Package for update to 10.10.5 and descriptive update of Build 14F9a to build 14F19a: http://www.insanelymac.com/forum/topic/285760-help-topic-further-help-in-chatosx86hulegacykernel-irc/page-122?do=findComment&comment=2158191 Description of the update build 14F19a to build 14F22a (only to be regarded as an experiment): http://www.insanelymac.com/forum/topic/285760-help-topic-further-help-in-chatosx86hulegacykernel-irc/page-122?do=findComment&comment=2158250 Considering the build and the build 14F19a 14F22a only as an experiment. From Build 14F19a and Build 14F22a can only be seen as an experiment, and is not recommended on a main partition and will cause problems in the use of some programs. (Note: the build 14F19a running on my hackintosh without a problem) good luck! 2 Link to comment Share on other sites More sharing options...
lpukraine Posted August 14, 2015 Share Posted August 14, 2015 (edited) Unsuccessfully update OS to 10.10.5( Choose update via App Store After reboot started Windows and replace kernel and kext (http://www.insanelymac.com/forum/topic/302075-amd-yosemite-kernel-testing-for-help-use-the-help-topic/page-53?do=findComment&comment=2118292) with Transmac. (Use this method with 10.10.2-10.10.4 updates and it worked great). Then boot with Yosemite usb installer and repair disk and permissions with Disk Utility. Start system and got opcode error( Before update i made backup of system.kext, applematch.kext and sandbox.kext. Boot into windows again and replace these three kexts with Transmac. Again boot with Yosemite usb installer and repair disk and permissions with Disk Utility. But problem is still present - opcode error and system doesn't start. Maybe now need a fresh install Edited August 14, 2015 by lpukraine Link to comment Share on other sites More sharing options...
spakk Posted August 14, 2015 Share Posted August 14, 2015 @lpukraine as you have described, it will not work.,....I have tested everything, read what I've written before. Link to comment Share on other sites More sharing options...
lpukraine Posted August 14, 2015 Share Posted August 14, 2015 @lpukraine as you have described, it will not work.,....I have tested everything, read what I've written before. Strange because i updated system from 10.10.1 to 10.10.4 with replacing only kernel and phread.kext. Think that 10.10.5 update will be successful too. Maybe Apple changed something else in this build and now this method does not work. Will make fresh install of 10.10.1 and then update to 10.10.4. 10.10.4 works great. Link to comment Share on other sites More sharing options...
spakk Posted August 14, 2015 Share Posted August 14, 2015 Edit: Maybe we succeed another simple way to the goal, without these serious engagement when many could test. Link to comment Share on other sites More sharing options...
lpukraine Posted August 14, 2015 Share Posted August 14, 2015 Edit: Maybe we succeed another simple way to the goal, without these serious engagement when many could test. Maybe i need to replace corecrypto.kext too. Can you upload it to me from 10.10.4 Link to comment Share on other sites More sharing options...
spakk Posted August 14, 2015 Share Posted August 14, 2015 You have to take the Extensions folder from the previous executable OSX version ...etc. read what I have written, without repeating here again. Link to comment Share on other sites More sharing options...
lpukraine Posted August 14, 2015 Share Posted August 14, 2015 Can i extract it from 10.10.4 combo update dmg? Is it suitable for me? Link to comment Share on other sites More sharing options...
spakk Posted August 14, 2015 Share Posted August 14, 2015 yes, with a pacifist, then add the package for 10.10.5 into the Extensions folder. 1 Link to comment Share on other sites More sharing options...
lpukraine Posted August 14, 2015 Share Posted August 14, 2015 yes, with a pacifist, then add the packet for 10.10.5 in the Extensions folder.I'm going to do thisThanks, spakk, for your help. 2 Link to comment Share on other sites More sharing options...
spakk Posted August 14, 2015 Share Posted August 14, 2015 everything you need for update 10.10.5 to know for that I have taken here together 2 Link to comment Share on other sites More sharing options...
gils83 Posted August 14, 2015 Share Posted August 14, 2015 hello after update combo 10.10.5 boot flag : -f (ignore cache ) -pthread.kext 10.10 Tora Chi Yo -ACPI/IOPCI patched -kernel Tora Chi Yio 10.10 error opcode Bronya or Tora Chi Yo , one new kernel if you please ! Link to comment Share on other sites More sharing options...
kumita-chan Posted August 14, 2015 Share Posted August 14, 2015 Where I can find the kexts for do the combo update to 10.10.4? Link to comment Share on other sites More sharing options...
gils83 Posted August 15, 2015 Share Posted August 15, 2015 hello all look with kernel Bronya sandbox ( carboncore ? ) Link to comment Share on other sites More sharing options...
victor moises n Posted August 15, 2015 Share Posted August 15, 2015 Testing here update 10.10.5 kernel Bronya not working wait for a new kernel or a solution. Link to comment Share on other sites More sharing options...
spakk Posted August 15, 2015 Share Posted August 15, 2015 test with this Kernel and report Link to comment Share on other sites More sharing options...
Gogeta5026 Posted August 15, 2015 Share Posted August 15, 2015 Tests mit diesem Kernel and report No luck using that kernel Link to comment Share on other sites More sharing options...
spakk Posted August 15, 2015 Share Posted August 15, 2015 No luck using that kernel .... I repeat myself constantly. if you have the intention to upgrade to 10.10.5, then read the previous pages in detail, please. then read what I have written here, then the update10.10.5 will work with amd kernel, with the contents of the package as well as to the other adjustments this time it's not so simple for amd CPUs, but it works 1 Link to comment Share on other sites More sharing options...
victor moises n Posted August 15, 2015 Share Posted August 15, 2015 And I tried here more without success, I ended up returning to 10.10.4 10.10.5 kernel will look for one made, I made the following way use in dual boot with windows updated the combo update after the windows accessed the osx partition and Substitutes kernel in folders kernels and extension in the extensions folder boot the system and unable to access giving error. Link to comment Share on other sites More sharing options...
spakk Posted August 15, 2015 Share Posted August 15, 2015 write your hardware specifications in your signature, so that someone can help you.if you do not like the kernel, then take the last bronya's rc7 kernel or the last kernel of Tora Chi Yo, that can you decide for yourself. Link to comment Share on other sites More sharing options...
gils83 Posted August 15, 2015 Share Posted August 15, 2015 we need a new kernel for AMD 14.4 ,Yo 10.10.5 does not work, the opposite would surprise me 2 Link to comment Share on other sites More sharing options...
Recommended Posts