Kaya80 Posted February 25, 2015 Share Posted February 25, 2015 iCloud .. AMD .. Yosemite ..... ... must login in the intel machine with genuine kernel ... after login .. replace the kernel with amd kernel .. rebuild cache and put back in AMD machine .. Done Screen Shot 2015-02-24 at 8.40.58 AM.png I never did such a thing like this, i simply copied my Intel account through time machine backup in my AMD, et voilà....le jeux sont fait. Locked on 10.10, i wanna wait for a fix for a combo update,i don't want to do a fresh install again, cause then i've to copy iCloud account again, very boring... Link to comment Share on other sites More sharing options...
polyzargone Posted February 25, 2015 Share Posted February 25, 2015 I never did such a thing like this, i simply copied my Intel account through time machine backup in my AMD, et voilà....le jeux sont fait. Locked on 10.10, i wanna wait for a fix for a combo update,i don't want to do a fresh install again, cause then i've to copy iCloud account again, very boring... I also use that trick but with a Time Machine backup, no need to copy your iCloud account back again, it will just ask your iCloud password when you'll boot back on your restored partition 1 Link to comment Share on other sites More sharing options...
lpukraine Posted February 25, 2015 Share Posted February 25, 2015 OK RETEST This is the last modification for K8 processors Unfortunately got opcode error again: System with R1 and R2 kernels works, but a lot of opcode errors in log. Link to comment Share on other sites More sharing options...
Meowthra Posted February 25, 2015 Share Posted February 25, 2015 Unfortunately got opcode error again: Снимок экрана 2015-02-25 в 15.08.22.png Снимок экрана 2015-02-25 в 15.08.40.png System with R1 and R2 kernels works, but a lot of opcode errors in log. I have not been able to understand Actually K8 TEST Is based on the REV-8D I just FIX K10 and K10.5 CPID with TSC K8 still Is REV8D code But after compiling K8 test is still a problem I uploaded the kernel Actually I tested no problem on My K10 You can try to download xcode Compile on their own machines After all K8 CPU less certain instructions that opcode 64: 0F B6 0F is movzx ecx, byte [ds:rdi] The instruction is 64bit register address[rdi] get 1 byte Value Conversion 32bit[000000xx] to 32bit registers[ECX] I see K8 opcode 64 MSG Almost all of this code 64->32 or 32->64 Compile on their own machines Compatibility degree would be better Link to comment Share on other sites More sharing options...
kyh3im Posted February 25, 2015 Share Posted February 25, 2015 I have not been able to understand Actually K8 TEST Is based on the REV-8D I just FIX K10 and K10.5 CPID with TSC K8 still Is REV8D code But after compiling K8 test is still a problem I uploaded the kernel Actually I tested no problem on My K10 You can try to download xcode Compile on their own machines After all K8 CPU less certain instructions that opcode 64: 0F B6 0F is movzx ecx, byte [ds:rdi] The instruction is 64bit register address[rdi] get 1 byte Value Conversion 32bit[000000xx] to 32bit registers[ECX] I see K8 opcode 64 MSG Almost all of this code 64->32 or 32->64 Compile on their own machines Compatibility degree would be better I tested your k8 r2 kernel. I installed AppleNforceAta 1.0.5. My chameleon is r2468. Still have opcode error "invalid kernel opcode (64-bit): 80 b8 59 01 00 00 00 78 0b 80" and i'm not sure if system lags anymore (seems ok to me). There's two kernels that does not cause error bronya's rc7 and your r8L v1. What kernel should i while compiling kernel ( i compiled some time ago vanila kernel on Snow Leo so i think i can handle it since you always have a diff with your kernel)? And somehow i broke my chameleon. i can't load r8L kernel anymore. after loading i have my screen in standby mode same thing with k8 r2. but this time i can add "GraphicsEnabler=Yes npci=0x3000" and monitor works(this does not work on other kernels ). I would like to read some documentation on chameleon, because my systems behave differently when there is different chameleon revision for example after rev2377 i can't boot my SnowLeo. Link to comment Share on other sites More sharing options...
Meowthra Posted February 25, 2015 Share Posted February 25, 2015 I tested your k8 r2 kernel. I installed AppleNforceAta 1.0.5. My chameleon is r2468. Still have opcode error "invalid kernel opcode (64-bit): 80 b8 59 01 00 00 00 78 0b 80" and i'm not sure if system lags anymore (seems ok to me). There's two kernels that does not cause error bronya's rc7 and your r8L v1 10.6x-10.8x can use chameleon 2256 10.6-10.9 64bit http://www.insanelymac.com/forum/topic/303988-amd-kernel-106-109-all-64-bit/ You can try to learn to compile Kernel K8 benefit users boot-2256.zip 1 Link to comment Share on other sites More sharing options...
ameris_cyning Posted February 26, 2015 Share Posted February 26, 2015 VoodooHDA cutoff audio problem fixed. It was an issue with my DSDT, not yall's kernels 1 Link to comment Share on other sites More sharing options...
yakei Posted February 26, 2015 Share Posted February 26, 2015 yosemite (10.10.1, kernel 1010-REV-8C) hi andy, bronya and Tora Chi Yo can help me someone during this error message? many Thanks Link to comment Share on other sites More sharing options...
lpukraine Posted February 26, 2015 Share Posted February 26, 2015 yosemite (10.10.1, kernel 1010-REV-8C) hi andy, bronya and Tora Chi Yo can help me someone during this error message? many Thanks Bug in process suhelperd... message have maybe everyone of us. It does not effect the functionality of system. 1 Link to comment Share on other sites More sharing options...
yakei Posted February 26, 2015 Share Posted February 26, 2015 Bug in process suhelperd... message have maybe everyone of us. It does not effect the functionality of system. when starting this error shown, which start time worsened thereby substantially (with my hardware) Link to comment Share on other sites More sharing options...
lpukraine Posted February 26, 2015 Share Posted February 26, 2015 when starting this error shown, which start time worsened thereby substantially (with my hardware)On my hack start time increase for about 5 sec due to this messages. Someone wrote here in this topic that disabling autoupdate on App Store ( in System Preferences) solve this problem and messages are not shown anymore after this. Link to comment Share on other sites More sharing options...
yakei Posted February 26, 2015 Share Posted February 26, 2015 Someone wrote here in this topic that disabling autoupdate on App Store ( in System Preferences) solve this problem and messages are not shown anymore after this. if already tested, with me did not function Link to comment Share on other sites More sharing options...
jsl Posted February 27, 2015 Share Posted February 27, 2015 Try Replace chameleon 2468 & open Terminal : sysctl machdep.cpu and TEST it My Acer Power M8 MB's AMD CPU: Smith-Jamess-Mac:~ smithjames$ sysctl machdep.cpu machdep.cpu.max_basic: 1 machdep.cpu.max_ext: 2147483672 machdep.cpu.vendor: AuthenticAMD machdep.cpu.brand_string: AMD Athlon 64 X2 Dual Core Processor 3800+ machdep.cpu.family: 15 machdep.cpu.model: 75 machdep.cpu.extmodel: 4 machdep.cpu.extfamily: 0 machdep.cpu.stepping: 2 machdep.cpu.feature_bits: 395049983 8193 machdep.cpu.extfeature_bits: 3956538367 31 machdep.cpu.signature: 266162 machdep.cpu.brand: 0 machdep.cpu.features: FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MCA CMOV PAT PSE36 CLFSH MMX FXSR SSE SSE2 HTT SSE3 CX16 machdep.cpu.extfeatures: SYSCALL XD EM64T LAHF RDTSCP TSCI machdep.cpu.logical_per_package: 2 machdep.cpu.cores_per_package: 2 machdep.cpu.microcode_version: 0 machdep.cpu.cache.linesize: 64 machdep.cpu.cache.L2_associativity: 1 machdep.cpu.cache.size: 524288 machdep.cpu.address_bits.physical: 40 machdep.cpu.address_bits.virtual: 48 machdep.cpu.core_count: 2 machdep.cpu.thread_count: 2 Chiset is Nvidia MCP61. Bootloader is Chameleon 2380 V3 or newer one made no difference. No matter using Nvidia 7600 GT or AMD/ATI Radeon HD 5770 as GPU during booting always freeze after "PCI Configuration Begin" even added "npci=0x2000 GE=N cpus=1" or "npci=0x3000" , "PCIRootUID=1", "busratio=10 fsb=200" in any combination. Tested by all 10.10/10.10.1 AMD kernels posted here got the same problem. AppleNForceATA.kext 1.0.4 or 1.0.5 was applied in vain either. Up to now only 10.6.8 legacy_kernel is working. Link to comment Share on other sites More sharing options...
y2k4u Posted February 27, 2015 Share Posted February 27, 2015 My Acer Power M8 MB's AMD CPU: Smith-Jamess-Mac:~ smithjames$ sysctl machdep.cpu machdep.cpu.max_basic: 1 machdep.cpu.max_ext: 2147483672 machdep.cpu.vendor: AuthenticAMD machdep.cpu.brand_string: AMD Athlon 64 X2 Dual Core Processor 3800+ machdep.cpu.family: 15 machdep.cpu.model: 75 machdep.cpu.extmodel: 4 machdep.cpu.extfamily: 0 machdep.cpu.stepping: 2 machdep.cpu.feature_bits: 395049983 8193 machdep.cpu.extfeature_bits: 3956538367 31 machdep.cpu.signature: 266162 machdep.cpu.brand: 0 machdep.cpu.features: FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MCA CMOV PAT PSE36 CLFSH MMX FXSR SSE SSE2 HTT SSE3 CX16 machdep.cpu.extfeatures: SYSCALL XD EM64T LAHF RDTSCP TSCI machdep.cpu.logical_per_package: 2 machdep.cpu.cores_per_package: 2 machdep.cpu.microcode_version: 0 machdep.cpu.cache.linesize: 64 machdep.cpu.cache.L2_associativity: 1 machdep.cpu.cache.size: 524288 machdep.cpu.address_bits.physical: 40 machdep.cpu.address_bits.virtual: 48 machdep.cpu.core_count: 2 machdep.cpu.thread_count: 2 Chiset is Nvidia MCP61. Bootloader is Chameleon 2380 V3 or newer one made no difference. No matter using Nvidia 7600 GT or AMD/ATI Radeon HD 5770 as GPU during booting always freeze after "PCI Configuration Begin" even added "npci=0x2000 GE=N cpus=1" or "npci=0x3000" , "PCIRootUID=1", "busratio=10 fsb=200" in any combination. Tested by all 10.10/10.10.1 AMD kernels posted here got the same problem. AppleNForceATA.kext 1.0.4 or 1.0.5 was applied in vain either. Up to now only 10.6.8 legacy_kernel is working. What is your RAM memory configuration? 1X2Gb? Link to comment Share on other sites More sharing options...
jsl Posted February 27, 2015 Share Posted February 27, 2015 What is your RAM memory configuration? 1X2Gb? 2x1GB + 2x 512MB = 3 GB total Link to comment Share on other sites More sharing options...
y2k4u Posted February 27, 2015 Share Posted February 27, 2015 On my system with Nvidia MCP6x running AppleNForceATA.kext 2x2Gb would boot up OK with npci=0x2000. 1x2Gb would get stuck at "PCI Configuration Begin" with all combination of npci, PciRoot, and cpus. I suggest that you try different combinations of RAM configuration and npci settings. Link to comment Share on other sites More sharing options...
Meowthra Posted February 27, 2015 Share Posted February 27, 2015 Fixed some error code and compile parameter(This may be the reason K8 to opcode 64. I Unable test) PS: If K8 AM2 Processor appear opcode 64 MSG Please use the diff file Patch XNU Source To compile Because K8 processors Missing some CPU instructions Compared with K10 Current K8 processor missing the following instructions: FXSR(FXSAVE/FXRSTOR) Mon(MONITOR) POPCNT 1GBPAGE EM64T LZCNT PREFETCHW RDTSCP The new processor to compile May produce a new instruction optimization opcode Old processor don't support the new instructions to opcode 64 MSG so .... Compile on their own machines Compatibility degree would be better 1010-REV-8N.zip 8 Link to comment Share on other sites More sharing options...
Morpheus NS Posted February 27, 2015 Share Posted February 27, 2015 8N (SSE3 version) improved my Cinebench CPU score for 33% (compared to H version)! I don't know what you did there, but it is great! 4 Link to comment Share on other sites More sharing options...
spakk Posted February 27, 2015 Share Posted February 27, 2015 Fixed some error code and compile parameter(This may be the reason K8 to opcode 64. I Unable test) PS: If K8 AM2 Processor appear opcode 64 MSG Please use the diff file Patch XNU Source To compile Because K8 processors Missing some CPU instructions Compared with K10 Current K8 processor missing the following instructions: FXSR(FXSAVE/FXRSTOR) Mon(MONITOR) POPCNT 1GBPAGE EM64T LZCNT PREFETCHW RDTSCP The new processor to compile May produce a new instruction optimization opcode Old processor don't support the new instructions to opcode 64 MSG so .... Compile on their own machines Compatibility degree would be better Kernel (SSEPlus Version) works very well with Phenom II X6, great work Test with Yosemite 10.10.3: "uname -a" + "sysctl machdep" Last login: Sat Feb 28 02:27:31 on ttys000 mein-pc:~ mein$ uname -a Darwin mein-pc 14.0.0 Darwin Kernel Version 14.0.0: Fri Feb 27 21:34:14 WET 2015; Torachiyo:xnu-2782.1.97-REV-8N/BUILD/obj/RELEASE_X86_64 x86_64 mein-pc:~ mein$ sysctl machdep machdep.user_idle_level: 0 machdep.cpu.max_basic: 6 machdep.cpu.max_ext: 2147483675 machdep.cpu.vendor: AuthenticAMD machdep.cpu.brand_string: AMD Phenom II X6 1100T Processor machdep.cpu.family: 16 machdep.cpu.model: 10 machdep.cpu.extmodel: 0 machdep.cpu.extfamily: 1 machdep.cpu.stepping: 0 machdep.cpu.feature_bits: 36064020440808447 machdep.cpu.extfeature_bits: 61572378786815 machdep.cpu.signature: 1052576 machdep.cpu.brand: 0 machdep.cpu.features: FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MCA CMOV PAT PSE36 CLFSH MMX FXSR SSE SSE2 HTT SSE3 MON CX16 POPCNT machdep.cpu.extfeatures: SYSCALL 1GBPAGE EM64T LAHF LZCNT PREFETCHW RDTSCP TSCI machdep.cpu.logical_per_package: 6 machdep.cpu.cores_per_package: 6 machdep.cpu.microcode_version: 21 machdep.cpu.processor_flag: 1 machdep.cpu.mwait.linesize_min: 64 machdep.cpu.mwait.linesize_max: 64 machdep.cpu.mwait.extensions: 3 machdep.cpu.mwait.sub_Cstates: 0 machdep.cpu.thermal.sensor: 0 machdep.cpu.thermal.dynamic_acceleration: 0 machdep.cpu.thermal.invariant_APIC_timer: 0 machdep.cpu.thermal.thresholds: 0 machdep.cpu.thermal.ACNT_MCNT: 1 machdep.cpu.thermal.core_power_limits: 0 machdep.cpu.thermal.fine_grain_clock_mod: 0 machdep.cpu.thermal.package_thermal_intr: 0 machdep.cpu.thermal.hardware_feedback: 0 machdep.cpu.thermal.energy_policy: 0 machdep.cpu.cache.linesize: 64 machdep.cpu.cache.L2_associativity: 16 machdep.cpu.cache.size: 512 machdep.cpu.tlb.inst.small: 32 machdep.cpu.tlb.inst.large: 16 machdep.cpu.tlb.data.small: 48 machdep.cpu.tlb.data.small_level1: 512 machdep.cpu.tlb.data.large: 48 machdep.cpu.tlb.data.large_level1: 128 machdep.cpu.address_bits.physical: 48 machdep.cpu.address_bits.virtual: 48 machdep.cpu.core_count: 6 machdep.cpu.thread_count: 6 machdep.vectors.timer: 221 machdep.vectors.IPI: 222 machdep.pmap.hashwalks: 1072786 machdep.pmap.hashcnts: 1182376 machdep.pmap.hashmax: 11 machdep.pmap.kernel_text_ps: 2097152 machdep.pmap.kern_pv_reserve: 12000 machdep.memmap.Conventional: 12881989632 machdep.memmap.RuntimeServices: 0 machdep.memmap.ACPIReclaim: 192512 machdep.memmap.ACPINVS: 200704 machdep.memmap.PalCode: 0 machdep.memmap.Reserved: 290521088 machdep.memmap.Unusable: 0 machdep.memmap.Other: 0 machdep.tsc.frequency: 3322524740 machdep.tsc.deep_idle_rebase: 1 machdep.tsc.nanotime.tsc_base: 236459903047 machdep.tsc.nanotime.ns_base: 0 machdep.tsc.nanotime.scale: 1292681810 machdep.tsc.nanotime.shift: 0 machdep.tsc.nanotime.generation: 2 machdep.misc.panic_restart_timeout: 1266874889 machdep.misc.interrupt_latency_max: 0x0 0xde 0x1804c8 machdep.misc.machine_check_panic: machdep.misc.timer_queue_trace: machdep.misc.nmis: 0 machdep.eager_timer_evaluations: 45 machdep.eager_timer_evaluation_max: 346349 mein-pc:~ mein$ 5 Link to comment Share on other sites More sharing options...
lpukraine Posted February 27, 2015 Share Posted February 27, 2015 Fixed some error code and compile parameter(This may be the reason K8 to opcode 64. I Unable test) PS: If K8 AM2 Processor appear opcode 64 MSG Please use the diff file Patch XNU Source To compile Because K8 processors Missing some CPU instructions Compared with K10 Current K8 processor missing the following instructions: FXSR(FXSAVE/FXRSTOR) Mon(MONITOR) POPCNT 1GBPAGE EM64T LZCNT PREFETCHW RDTSCP The new processor to compile May produce a new instruction optimization opcode Old processor don't support the new instructions to opcode 64 MSG so .... Compile on their own machines Compatibility degree would be better Thanks! Both versions work great! No opcode errors! Now have hard decision, which version should I use ? May be will use SSEPlus Thanks again!!! 3 Link to comment Share on other sites More sharing options...
spakk Posted February 27, 2015 Share Posted February 27, 2015 (edited) yosemite (10.10.1, kernel 1010-REV-8C) hi andy, bronya and Tora Chi Yo can help me someone during this error message? many Thanks hello my friend yakei, In terms of "Bug in process suhelperd ..." I have described how to fix that for a few months ago --> remove the automatic update, then should no longer occur that. Edit: go to "system settings" ---> "app Store" -> disable by removing the checkmark "automatic update" Edited February 27, 2015 by spakk 1 Link to comment Share on other sites More sharing options...
Dilshad11 Posted February 27, 2015 Share Posted February 27, 2015 Thanks for your great work Tora Chi YoCan someone advise which of these two kernels are more efficient to be used on athlon x3? Link to comment Share on other sites More sharing options...
jsl Posted February 28, 2015 Share Posted February 28, 2015 On my system with Nvidia MCP6x running AppleNForceATA.kext 2x2Gb would boot up OK with npci=0x2000. 1x2Gb would get stuck at "PCI Configuration Begin" with all combination of npci, PciRoot, and cpus. I suggest that you try different combinations of RAM configuration and npci settings. Unfortunately change with 2x 2GB DDR2 800 SDRAM still got the same freeze. Anyway thanks for your suggestion. Try to find any other solution. Link to comment Share on other sites More sharing options...
kul_arny Posted February 28, 2015 Share Posted February 28, 2015 Tora chi Yo i have AMD 1100T and i have been using rev8 sseplus..can u plz tell me whether that kernel is running my cpu in sse3 emulation mode or hardware accelerated mode...also if not is rev8N hardware SSE3 enabled??? Thanx for all the good work. Link to comment Share on other sites More sharing options...
m28ew Posted February 28, 2015 Share Posted February 28, 2015 I would like to say CONGRATULATION & THANK YOU for all member of the "Dev Team"finally all version of OSX (v10.6 - v10.10) can run flawlessly on my AMD P-II x4 965 But there’s an old issue still occurs with all the latest kernel of Bronya's RC5 & Tora Chi Yo's Rev-8NWhen I open the MAXIMAhttp://maxima.sourceforge.net/I can confirm that the app can work with the latest kernel (both Bronya’s & Tora’s) But I also notice that the console still repeatedly reports some kernel related errorswhich is “invalid user opcode (32-bit)” And here's the error list reported by the dmesg invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b 09 89 45 c8 8d 5c 24 f8 invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b 09 89 41 09 8b f0 8b 75 invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b 0a 03 1f 10 50 8b d0 8b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b 0a 03 1f 10 50 8b d0 8b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b ff ff 83 c4 1c 5e 5f 5b invalid user opcode (32-bit): 0f 0b 0a 03 1f 10 50 8b d0 8b invalid user opcode (32-bit): 0f 0b 0a 03 1f 10 50 8b d0 8b invalid user opcode (32-bit): 0f 0b 0a 03 1f 10 50 8b d0 8b 2 Link to comment Share on other sites More sharing options...
Recommended Posts