Meowthra Posted February 12, 2015 Share Posted February 12, 2015 Do you mean I must use Kernel in R8x series instead of Bronya_all_amd.Rc4 ? Because I always got reboot when I used your SSEPlus_R4, R5, & R6 or hanged as the below: Invalid user opcode (64-bit): f0 48 0f c7 0f 75 ef 5b c3 0f NO You can use any Me & him on kernel There are differences in the code I'm using based AnV Version Before feedback Please Description Kernel Version THX Link to comment Share on other sites More sharing options...
Kaya80 Posted February 12, 2015 Share Posted February 12, 2015 Open a terminal and type in: uname -a Post the output here. That should tell me what kernel you are booting with. Darwin Mac-Pro-di-Kayaman.local 14.1.0 Darwin Kernel Version 14.1.0: 2015年 2月 8日 周日 11時58分45秒 WET; Torachiyo:xnu-2782.1.97-SSEPlus/BUILD/obj/RELEASE_X86_64 x86_64 This is my kernel What version can i update to with this kernel?I'm on 10.10 Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted February 12, 2015 Share Posted February 12, 2015 hi dev ... thanks for all of this development for AMD there is two graphical problem i noticed till now using latest kernels here the first one is on pixelmator app when you use brush you can see corruption on alpha ? the second one puppet pin tool on aftereffects when use it aftereffects crashes Link to comment Share on other sites More sharing options...
Bronya Posted February 12, 2015 Share Posted February 12, 2015 hi dev ... thanks for all of this development for AMD there is two graphical problem i noticed till now using latest kernels here the first one is on pixelmator app when you use brush you can see corruption on alpha ? the second one puppet pin tool on aftereffects when use it aftereffects crashes Hi ! THIS ON FX CPUS ? 1 Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted February 12, 2015 Share Posted February 12, 2015 Hi ! THIS ON FX CPUS ? Hi yes on AMD fx-8350 with all kernel i tested till now Link to comment Share on other sites More sharing options...
Bronya Posted February 12, 2015 Share Posted February 12, 2015 Hi yes on AMD fx-8350 with all kernel i tested till now This on Maverick ! Tested on old cpus . 3 Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted February 12, 2015 Share Posted February 12, 2015 This on Maverick ! Tested on old cpus . Снимок экрана 2015-02-12 в 6.20.17 PM.png ! what is the processor type ? i don't use GraphicsEnabler may this the cause ? Link to comment Share on other sites More sharing options...
Bronya Posted February 12, 2015 Share Posted February 12, 2015 ! what is the processor type ? AMD Athlon II X2 250 i don't use GraphicsEnabler may this the cause ? Maybe ))) But I will try to yosemite Update ! I tested on Yosemite - fine work without problem ))) 2 Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted February 12, 2015 Share Posted February 12, 2015 AMD Athlon II X2 250 so is the emulated ssse3 better than the stocked one on fx or what ? 1 Link to comment Share on other sites More sharing options...
proi Posted February 12, 2015 Share Posted February 12, 2015 Hi yes on AMD fx-8350 with all kernel i tested till now AMD FX-8350 OSX 10.10.3 (beta). No issues at all. 1 Link to comment Share on other sites More sharing options...
Andy Vandijck Posted February 12, 2015 Share Posted February 12, 2015 so is the emulated ssse3 better than the stocked one on fx or what ? It would seem so. But we match Intel pretty precisely... Some food for thought to read up on: AMD has unaligned vector bugs for SSSE3... (AMD unaligned SSE, look in qemu) 1 Link to comment Share on other sites More sharing options...
Destroya01 Posted February 12, 2015 Share Posted February 12, 2015 Darwin Mac-Pro-di-Kayaman.local 14.1.0 Darwin Kernel Version 14.1.0: 2015年 2月 8日 周日 11時58分45秒 WET; Torachiyo:xnu-2782.1.97-SSEPlus/BUILD/obj/RELEASE_X86_64 x86_64 This is my kernel What version can i update to with this kernel?I'm on 10.10 As I suspected, you are still using the older kernel by Tora Chi Yo dated 2/8/15. This is why you are still having audio stuttering problems. Try to use the boot flag UseKernelCache=No after updating your kernel to 1010SSEPlus-rev.8. Link to comment Share on other sites More sharing options...
Mr___G Posted February 12, 2015 Share Posted February 12, 2015 Afternoon all, do the latest kernels support pentium d 805 2.66 ghz ? Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted February 12, 2015 Share Posted February 12, 2015 it was graphics enabler problem on pixelmator but aftereffects still crashes with puppet tool can any one test aftereffects puppet pin tool ? Link to comment Share on other sites More sharing options...
tatomi92 Posted February 12, 2015 Share Posted February 12, 2015 With Tora Chi Yo's rev8 kernel everything works good on my machine! Link to comment Share on other sites More sharing options...
Andy Vandijck Posted February 12, 2015 Share Posted February 12, 2015 Afternoon all, do the latest kernels support pentium d 805 2.66 ghz ? Yep, all our kernels should work on Pentium D. Mine and the one of Tora Chi Yo has even support for Pentium 4 added to the TSC so... Bronya's kernel works for Pentium D too. Pentium D = Intel Core 2 MSR TSC... Link to comment Share on other sites More sharing options...
Mr___G Posted February 12, 2015 Share Posted February 12, 2015 Thanks Andy,That's great I shall give it a go this evening. Link to comment Share on other sites More sharing options...
Kaya80 Posted February 12, 2015 Share Posted February 12, 2015 As I suspected, you are still using the older kernel by Tora Chi Yo dated 2/8/15. This is why you are still having audio stuttering problems. Try to use the boot flag UseKernelCache=No after updating your kernel to 1010SSEPlus-rev.8. Darwin Mac-Pro-di-Kayaman.local 14.0.0 Darwin Kernel Version 14.0.0: 2015年 2月11日 周三 08時42分14秒 WET; Torachiyo:xnu-2782.1.97-SSEPlus/BUILD/obj/RELEASE_X86_64 x86_64 Same thing, -f doesn't work, grey screen at startup, already use UseKernelCache=NO But now the audio works without bootflags AMD Cool & Quiet activated in bios, C1E disabled 2 Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted February 13, 2015 Share Posted February 13, 2015 also want to mention also clovergrowerpro fail on compiling tools required on compiling clover bootlaoder here is the log of error.. /Users/MK/CloverGrowerPro/src/gcc/gcc-4.9.2/configure --prefix='/Users/MK/CloverGrowerPro/toolchain' --with-sysroot='/Users/MK/CloverGrowerPro/toolchain/sdk' --enable-languages=c,c++ --libdir='/Users/MK/CloverGrowerPro/toolchain/lib/gcc49' --includedir='/Users/MK/CloverGrowerPro/toolchain/include/gcc49' --datarootdir='/Users/MK/CloverGrowerPro/toolchain/share/gcc49' --with-gettext=/Users/MK/CloverGrowerPro/toolchain --with-system-zlib --disable-nls --enable-plugin --with-gxx-include-dir='/Users/MK/CloverGrowerPro/toolchain/include/gcc49/c++/' --with-gmp='/Users/MK/CloverGrowerPro/toolchain' --with-mpfr='/Users/MK/CloverGrowerPro/toolchain' --with-mpc='/Users/MK/CloverGrowerPro/toolchain' --with-isl='/Users/MK/CloverGrowerPro/toolchain' --with-cloog='/Users/MK/CloverGrowerPro/toolchain' --enable-cloog-backend=isl --disable-bootstrap --disable-isl-version-check checking build system type... x86_64-apple-darwin14.0.0 checking host system type... x86_64-apple-darwin14.0.0 checking target system type... x86_64-apple-darwin14.0.0 checking for a BSD-compatible install... /usr/bin/install -c checking whether ln works... yes checking whether ln -s works... yes checking for a sed that does not truncate output... /usr/bin/sed checking for gawk... no checking for mawk... no checking for nawk... no checking for awk... awk checking for libatomic support... yes checking for libcilkrts support... yes checking for libitm support... yes checking for libsanitizer support... yes checking for libvtv support... no checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking whether g++ accepts -static-libstdc++ -static-libgcc... no checking for gnatbind... no checking for gnatmake... no checking whether compiler driver understands Ada... no checking how to compare bootstrapped objects... cmp --ignore-initial=16 $$f1 $$f2 checking for objdir... .libs checking for the correct version of gmp.h... no configure: error: Building GCC requires GMP 4.2+, MPFR 2.4.0+ and MPC 0.8.0+. Try the --with-gmp, --with-mpfr and/or --with-mpc options to specify their locations. Source code for these libraries can be found at their respective hosting sites as well as at ftp://gcc.gnu.org/pub/gcc/infrastructure/. See also http://gcc.gnu.org/install/prerequisites.html for additional info. If you obtained GMP, MPFR and/or MPC from a vendor distribution package, make sure that you have installed both the libraries and the header files. They may be located in separate packages. it says Building GCC requires GMP 4.2+, MPFR 2.4.0+ and MPC 0.8.0+. but on my notebook this problem doesn't appear !!!.. Link to comment Share on other sites More sharing options...
theconnactic Posted February 13, 2015 Share Posted February 13, 2015 What's wrong with the people? There's a help topic, folks! 1 Link to comment Share on other sites More sharing options...
ameris_cyning Posted February 13, 2015 Share Posted February 13, 2015 10.10.2 Error in VirtualBox on AMD X4 955. invalid kernel opcode (64-bit): 44 0f b6 1f 4c 8d 7f 01 41 83 10.10.2 doesnt work yet and will most likely not work until Apple releases their sources. Link to comment Share on other sites More sharing options...
Kaya80 Posted February 13, 2015 Share Posted February 13, 2015 can i update to 10.10.1 or it's better to wait? Link to comment Share on other sites More sharing options...
ameris_cyning Posted February 13, 2015 Share Posted February 13, 2015 can i update to 10.10.1 or it's better to wait? 10.10.1 is ok Link to comment Share on other sites More sharing options...
yakei Posted February 13, 2015 Share Posted February 13, 2015 Intel FSB = AMD HT-Link I Use Old TSC & New RTC TEST Audio Stuttering 10.10.2 with 1010-SSEPlus-Rev.8 invalid kernel opcode 64 thanks Link to comment Share on other sites More sharing options...
ameris_cyning Posted February 13, 2015 Share Posted February 13, 2015 10.10.2 with 1010-SSEPlus-Rev.8 invalid kernel opcode 64 thanks 10.10.2 doesnt work yet and will most likely not work until Apple releases their sources. Same page just 3 posts up. Come on, dude. Read the thread 2 Link to comment Share on other sites More sharing options...
Recommended Posts