jelmo2 Posted October 27, 2014 Share Posted October 27, 2014 @jelmo2 I don't understand why you are using a surfacepro 2 config.plist when in the main post there is this warn. NO SUPPORT IF YOU USE OTHER GUIDES, METHODS OR FILES PACKAGE. Never mix files, the config.plist on the pack is mandatory to make everything works, you just need to edit the smbios part to achieve AppStore access. @jahstories the config.plist is for the missing bluetooth controller and the graphics for the release Yosemite the beta Yosemite don't work always stuk on bluetooth controller en laggy graphics Link to comment Share on other sites More sharing options...
JahStories Posted October 27, 2014 Author Share Posted October 27, 2014 there is no need to quote the whole post... As i said before i can't provide any help if you guys mix files and other stuff. Using files from different configuration can only create more problems. Even cause is the config.plist that its injecting the right platform id for correct gpu accelleration. And please remember to don't use dsdts or other tables from different machine, cause that can even damage the device :/ Btw Obviously you can do whatever you want with the files inside the pack, but discuss your experiments on another thread please. Good Hack. Link to comment Share on other sites More sharing options...
kickinteeth Posted October 28, 2014 Share Posted October 28, 2014 @jahstories Link to comment Share on other sites More sharing options...
JahStories Posted October 28, 2014 Author Share Posted October 28, 2014 config.plist.zip Try following the usual steps but with this config.plist. Link to comment Share on other sites More sharing options...
JahStories Posted October 28, 2014 Author Share Posted October 28, 2014 please give some feedback Link to comment Share on other sites More sharing options...
kickinteeth Posted October 28, 2014 Share Posted October 28, 2014 @jahstories I will definitely give feedback once I get home tonight! Thank you! 1 Link to comment Share on other sites More sharing options...
wen1 Posted October 28, 2014 Share Posted October 28, 2014 JahStories, Audio does work well if you use the applehda and eadpfix from the package Thanks Wen1 1 Link to comment Share on other sites More sharing options...
JahStories Posted October 28, 2014 Author Share Posted October 28, 2014 Thanks to you for providing your feedback Link to comment Share on other sites More sharing options...
kickinteeth Posted October 29, 2014 Share Posted October 29, 2014 @jahstories Seems like the same old story... Link to comment Share on other sites More sharing options...
modacular Posted October 29, 2014 Share Posted October 29, 2014 Guys, does anyone have a fix for the hdmi output? Nor does it work with the provided kexts (that's normal), neither with the HD4000 fix from the Vietnam tool. Link to comment Share on other sites More sharing options...
Mirone Posted October 29, 2014 Share Posted October 29, 2014 @modacular It is necessary DSDT edits, and a correction framebuffer. Link to comment Share on other sites More sharing options...
modacular Posted October 29, 2014 Share Posted October 29, 2014 @MironeIs there a patch available? (Or instructions somewhere? I thought I saw a post with this specific info in the previous thread - Mavericks - but I can't seem to find it) Link to comment Share on other sites More sharing options...
Mirone Posted October 29, 2014 Share Posted October 29, 2014 @Mirone Is there a patch available? (Or instructions somewhere? I thought I saw a post with this specific info in the previous thread - Mavericks - but I can't seem to find it) http://www.insanelymac.com/forum/topic/301137-yosemite-applehda-hdmi-audio/ Link to comment Share on other sites More sharing options...
modacular Posted October 29, 2014 Share Posted October 29, 2014 Oh, I didn't phrase it properly. I have a problem with the video output, not the audio one. Audio is working fine. Link to comment Share on other sites More sharing options...
Mirone Posted October 29, 2014 Share Posted October 29, 2014 what problem? Link to comment Share on other sites More sharing options...
modacular Posted October 29, 2014 Share Posted October 29, 2014 It just doesn't work. I connect an external monitor to the miniDisplayPort via a miniDisplayPort to DVI adapter and it doesn't work. In my previous setup (Mavericks 10.9.5) I had to install a 'HD4000 DP/HDMI port' kext from the Hackintosh Vietnam Tool, which I also did now in the Yosemite clean setup and it doesn't work. Is there any workaround? Link to comment Share on other sites More sharing options...
JahStories Posted October 29, 2014 Author Share Posted October 29, 2014 Try this, sadly my mini dp to hdmi cable its broken, so i cannot test. but it was working on dps and betas... thanks to wen1 Link to comment Share on other sites More sharing options...
modacular Posted October 29, 2014 Share Posted October 29, 2014 @JahStories Nope. It doesn't work. My previous AppleIntelFramebufferCapri was version 10.0.86 and the one you attached is 10.0.77. The only difference with 10.0.77 is that when I plug in the cable, the Surface screen goes black for half a second (as if it understood that I plugged in an external screen) but the external screen doesn't receive a signal. With the 10.0.86 it didn't even 'blink' when I plugged in the cable.. Link to comment Share on other sites More sharing options...
JahStories Posted October 29, 2014 Author Share Posted October 29, 2014 as i said i cannot test right now, but i think that patching the actual framebuffer should fix, i think wen1 already did that... and i've already asked him to share it... Link to comment Share on other sites More sharing options...
aeVolt Posted October 29, 2014 Share Posted October 29, 2014 Just wanted to add my success here... I was able to get mostly everything working so far using this guide on my Surface Pro 1 - Single boot - OSX Yosemite. Audio, pen, touch, keyboard, bt, displayport out all working for me :-] The only hiccups so far: -When installing Yosemite, the screen was hard to see due to black and white lines running across the screen. I just dealt with it and continued with the install. Eventually this was fixed after booting the hard drive and installing all the kext files. (although it was pretty tough to see what I was doing the whole time lol) -Graphical glitches during boot -- Apple logo is displayed multiple times across the screen at boot - also when login screen comes up the screen flickers a few times. (I believe this is a known issue caused by the AppleFrameBufferCapri?) -Still no internal WiFi (Which everyone already knows isn't working) Thanks for all your hard work JahStories and everyone else who has contributed. Link to comment Share on other sites More sharing options...
JahStories Posted October 29, 2014 Author Share Posted October 29, 2014 hi there, thanks for providing your feedback about your glitch during boot try to install the kext as suggested here and for wifi just go get a micro usb wireless adapter, internal card isn't working yet... Link to comment Share on other sites More sharing options...
kickinteeth Posted October 29, 2014 Share Posted October 29, 2014 Jahstories, Is there anything to troubleshoot my problem? I get stuck at the same place with the new config.plist.. Thank you again! -Kick Link to comment Share on other sites More sharing options...
JahStories Posted October 29, 2014 Author Share Posted October 29, 2014 its strange... please post a screen using the latest config.plist, adding -x as boot argoument and boot without cache with injected kexts Link to comment Share on other sites More sharing options...
aeVolt Posted October 29, 2014 Share Posted October 29, 2014 hi there, thanks for providing your feedback about your glitch during boot try to install the kext as suggested here and for wifi just go get a micro usb wireless adapter, internal card isn't working yet... The kext you linked to has resolved the multiple apple logos during boot glitch, thank you! I have a micro usb wireless adapter coming today. -- I will update once I have a chance to install. The only real problem remaining for me is the flickering screen at password screen right after boot, but it sounds like that is an issue you are already aware of. Link to comment Share on other sites More sharing options...
JahStories Posted October 29, 2014 Author Share Posted October 29, 2014 i'm not experiencing anything like that, no glitches at all... :/ Link to comment Share on other sites More sharing options...
Recommended Posts