Jump to content

Asus Z87I-Deluxe + Yosemite

soarhevn

By soarhevn,
in OSx86 10.10 (Yosemite)

 Share
31 posts in this topic

Recommended Posts

soarhevn
soarhevn
Posted
Posted

Yosemite is up and running now on my wife's Asus Z87I-Deluxe.

 

I used Shunu's Qlover Note to install on the USB drive, instructions on the link. First make sure you install for UEFI so you can avoid the MBR madness. It is also important that in the Graphics section that Intel injection is on, otherwise you will get a kernel panic.

 

Initial WiFi via built in card can be had via toleda's toledaARPT.kext from here. For turning on the 5Ghz on the built-in WiFi, use the below in your Clover Config file (thanks Girl Introverted for this code).

<key>KextsToPatch</key>
		<array>
			<dict>
				<key>Comment</key>
				<string>10.10-Airport_BCM4352_5Ghz</string>
				<key>Find</key>
				<data>
				WFQAKxgsIQAg
				</data>
				<key>Name</key>
				<string>AirPortBrcm4360</string>
				<key>Replace</key>
				<data>
				WFQICjYcRwAK
				</data>
			</dict>
		</array>

I was never successful getting the built-in BT working, gave up and bought an BT dongle.

 

For the Realtek ALC1150, follow toleda's CloverALC here.

Link to comment
Share on other sites
legoxx
legoxx
Posted
Posted

thanks there, I'll try it in the evening and will report.

 

have you done any other post-installation steps ([url=&quot;http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/&quot;]#####[/url])?

is apple store and imessage running for you?

what tool have you used for kext install?

Link to comment
Share on other sites
s0niqu3
s0niqu3
Posted
Posted

Yosemite is up and running now on my wife's Asus Z87I-Deluxe.

 

I used Shunu's Qlover Note to install on the USB drive, instructions on the link. First make sure you install for UEFI so you can avoid the MBR madness. It is also important that in the Graphics section that Intel injection is on, otherwise you will get a kernel panic.

 

Initial WiFi via built in card can be had via toleda's toledaARPT.kext from here. For turning on the 5Ghz on the built-in WiFi, use the below in your Clover Config file (thanks Girl Introverted for this code).

<key>KextsToPatch</key>
		<array>
			<dict>
				<key>Comment</key>
				<string>10.10-Airport_BCM4352_5Ghz</string>
				<key>Find</key>
				<data>
				WFQAKxgsIQAg
				</data>
				<key>Name</key>
				<string>AirPortBrcm4360</string>
				<key>Replace</key>
				<data>
				WFQICjYcRwAK
				</data>
			</dict>
		</array>

I was never successful getting the built-in BT working, gave up and bought an BT dongle.

 

For the Realtek ALC1150, follow toleda's CloverALC here.

Hey, thanks for the link (girlintroverted is my blog) but the credit for the actual patch goes to skvo, and I'm actually using a slightly newer patch that I found here:

 

http://www.insanelymac.com/forum/topic/292542-airport-pcie-half-mini/?p=2071021

 

You can copy/paste this into your config.plist if you want to try it instead

			<dict>
				<key>Comment</key>
				<string>10.10-Airport_BCM4352_5Ghz</string>
				<key>Find</key>
				<data>
				WFQAKxgsIQAg
				</data>
				<key>Name</key>
				<string>AirPortBrcm4360</string>
				<key>Replace</key>
				<data>
				VVMICjYcRwAK
				</data>
			</dict>

For bluetooth you need two things, working USB 3.0 (since the BT chip is attached to the USB bus, not pcie) either with clover or custom DSDT, and elmydish's BTFirmWareUploader.kext

 

It should show up like this in System Information and IOJones:

kEOxhdt.png

E6tO4oY.png

qu9DuL9.png

 

You might also want to double check the physical seating/connection of the module (if it's removable.) I had someone comment on my blog that their BT didn't work, but for some reason the mpcie card wasn't making proper contact, and re-seating it fixed everything.

 

Hope that helps  :)

Link to comment
Share on other sites
legoxx
legoxx
Posted
Posted

Yosemite is up and running now on my wife's Asus Z87I-Deluxe.

 

I used Shunu's Qlover Note to install on the USB drive, instructions on the link. First make sure you install for UEFI so you can avoid the MBR madness. It is also important that in the Graphics section that Intel injection is on, otherwise you will get a kernel panic.

 

Initial WiFi via built in card can be had via toleda's toledaARPT.kext from here. For turning on the 5Ghz on the built-in WiFi, use the below in your Clover Config file (thanks Girl Introverted for this code).

<key>KextsToPatch</key>
		<array>
			<dict>
				<key>Comment</key>
				<string>10.10-Airport_BCM4352_5Ghz</string>
				<key>Find</key>
				<data>
				WFQAKxgsIQAg
				</data>
				<key>Name</key>
				<string>AirPortBrcm4360</string>
				<key>Replace</key>
				<data>
				WFQICjYcRwAK
				</data>
			</dict>
		</array>

I was never successful getting the built-in BT working, gave up and bought an BT dongle.

 

For the Realtek ALC1150, follow toleda's CloverALC here.

 

Hi there,

 

I have tried Qlover note, but run to following screen even before MAC OS installer started

http://s14.postimg.org/qscazwwlt/IMG_1722.jpg

 

any idea what can be wrong?

 

thanks

Link to comment
Share on other sites
Fabio1971
Fabio1971
Posted
Posted

thanks there, I'll try it in the evening and will report.

 

have you done any other post-installation steps ([url=&quot;http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/&quot;]#####[/url])?

is apple store and imessage running for you?

what tool have you used for kext install?

 

I'm working on, just missing to finish

 

Fabio

Link to comment
Share on other sites
legoxx
legoxx
Posted
Posted

Hi Fabio,

 

thank you for posting here. I have made few more steps with hackintosh but still far from end line.

I have yosemite installed but without any special post-configuration. I have gave up on [url=&quot;http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/&quot;]#####[/url]

as it just break the installation (system will hang on boot with nvidiasensors: still waiting for graphic accelerator)

 

1) it seems that USB's on my asus z87 deluxe are somehow funny, there is only one port that can be used for keyboard and USB stick

they will not work if connected to any other port while in yosemite (but they all works fine while in windows or bios)

 

2) I have clover installed on USB stick (with tool from Shunu)

 

3) i have checked your configuration at http://www.insanelymac.com/forum/topic/295549-clover-config/?p=2014196 and found on the net all kext that you state there

 

4) I have copied all kext to EFI\CLOVER\Kext\10.10 and your config.plist to EFI\CLOVER\config.plist

 

but when booting I'm not sure if kext from clover are really loaded.

 

can you maybe create a zip with all the files that are needed for CLOVER (kext, SSDT tables, config.plist)

and upload it somewhere?

 

is there a way to see if correct kexts are loaded with CLOVER?

 

have anybody else experienced troubles with USB ports on ASUS z87 deluxe?

 

thank you for help


it seems that all USB2.0 ports in the back works (the ones in front do not)

 

it would be great to have a vanilla installation of yosamite on the disk

and all kext replacement/injections as well as any other hackintosh modification

do with clover from his directory, is such setup possible?

 

thanks

 

lego

Link to comment
Share on other sites
legoxx
legoxx
Posted
Posted

Hello lego

 

more info

describe hardware

bios version

the config file can be used to link 10.9.5, modifications to 10.10

 

Fabio

 

HI Fabio,

 

I'm having:

- asus z87 deluxe (BIOS v1802)

- i7 4770K

- GIGABYTE GTX780 3GB

- 16GB CL10 Hyper X Black Kingston (2x8gb)

- samsung 740 EVO SSD (no other discs attached during install)

 

I am trying to install 10.10 with clover

 

thank you for your help

 

lego

Link to comment
Share on other sites
Fabio1971
Fabio1971
Posted
Posted

HI Fabio,

 

I'm having:

- asus z87 deluxe (i'll add bios version when i will be at home, but it's something around 4months old)

- i7 4770K

- GIGABYTE GTX780 3GB

- 16GB CL10 Hyper X Black Kingston (2x8gb)

- samsung 740 EVO SSD (no other discs attached during install)

 

I am trying to install 10.10 with clover

 

thank you for your help

 

lego

ok, let me know the bios version

 

Fabio

Link to comment
Share on other sites
joepepper
joepepper
Posted
Posted

Yosemite is up and running now on my wife's Asus Z87I-Deluxe.

 

I used Shunu's Qlover Note to install on the USB drive, instructions on the link. First make sure you install for UEFI so you can avoid the MBR madness. It is also important that in the Graphics section that Intel injection is on, otherwise you will get a kernel panic.

 

Initial WiFi via built in card can be had via toleda's toledaARPT.kext from here. For turning on the 5Ghz on the built-in WiFi, use the below in your Clover Config file (thanks Girl Introverted for this code).

<key>KextsToPatch</key>
		<array>
			<dict>
				<key>Comment</key>
				<string>10.10-Airport_BCM4352_5Ghz</string>
				<key>Find</key>
				<data>
				WFQAKxgsIQAg
				</data>
				<key>Name</key>
				<string>AirPortBrcm4360</string>
				<key>Replace</key>
				<data>
				WFQICjYcRwAK
				</data>
			</dict>
		</array>

I was never successful getting the built-in BT working, gave up and bought an BT dongle.

 

For the Realtek ALC1150, follow toleda's CloverALC here.

 

Thanks this worked for me too. I am on maximus vi impact and have everything up and running, wifi, bluetooth (cant say if it goes full speed but it helped that at least worked so i could do bluetooth internet pass through from my phone to connect to the internet till i got wi-fi working). 

 

unfortunately i couldnt use qlover for usb instalaltion. it used to crash :(

Link to comment
Share on other sites
legoxx
legoxx
Posted
Posted

Hi Fabio,

 

I came late home yesterday evening, so I have just tried to use kext's and DSDT's and SSDT's

from you guide on my current 10.10 installation (that was done with clover utility a while ago)

and USB clover installation.

 

I have a question about FakeSMC.kext. If I understand it correctly this is installed by HWSensors.pkg.zip.

 

Should I run that pkg on target system or on my other mac?

what do I select as a destination? is it an USB drive used for installation or target yosamite system?

 

wouldn't it be possible that you attach directly Intel FakeSMC.kext that we do not have to run this utillity?

 

Are there any major modification to your guide when using nvidia card?

 

I will try to follow the full guide and reinstall my yosamite partition later today

 

thank you

 

lego

Link to comment
Share on other sites
Fabio1971
Fabio1971
Posted
Posted

Hi Fabio,

 

I came late home yesterday evening, so I have just tried to use kext's and DSDT's and SSDT's

from you guide on my current 10.10 installation (that was done with clover utility a while ago)

and USB clover installation.

 

I have a question about FakeSMC.kext. If I understand it correctly this is installed by HWSensors.pkg.zip.

 

Should I run that pkg on target system or on my other mac?

what do I select as a destination? is it an USB drive used for installation or target yosamite system?

 

wouldn't it be possible that you attach directly Intel FakeSMC.kext that we do not have to run this utillity?

 

Are there any major modification to your guide when using nvidia card?

 

I will try to follow the full guide and reinstall my yosamite partition later today

 

thank you

 

lego

Hello lego

problems to write on my driving

 

Fabio

Link to comment
Share on other sites
Mauzer
Mauzer
Posted
Posted

Hey guys! Is there any hope for us with MBR and Chameleon regarding wifi and bluetooth on Z87 Deluxe? As I can see, everything is about EFI and Clover instalation, so it is pretty hard to find such informations these days for people with MBR multiboot sistems and Chameleon. Is there some Chameleon wifi code like Clover one, or anything else?

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...