Metalcored00d Posted December 20, 2015 Share Posted December 20, 2015 Thank you for the guide! 2 questions though: 1) Intel GFX in Clover config.plist: <key>ig-platform-id</key> <string>0x01620005</string> In OzmosisDefaults.plist: <key>AAPL,ig-platform-id</key> <integer>0xDEADBEAF</integer> I have 01620007 in my Clover config.plist --> What does this become in Ozmosis? 2) Where can I find the 17 digit BaseboardSerial? Thanks in advance! Link to comment Share on other sites More sharing options...
davidm71 Posted December 20, 2015 Share Posted December 20, 2015 Anyone know how to get dual monitor support working or is it not supported? Thanks. Link to comment Share on other sites More sharing options...
crusher Posted December 20, 2015 Share Posted December 20, 2015 Thank you for the guide! 2 questions though: 1) Intel GFX in Clover config.plist: <key>ig-platform-id</key> <string>0x01620005</string> In OzmosisDefaults.plist: <key>AAPL,ig-platform-id</key> <integer>0xDEADBEAF</integer> I have 01620007 in my Clover config.plist --> What does this become in Ozmosis? 2) Where can I find the 17 digit BaseboardSerial? Thanks in advance! You must put in nvram like this: sudo nvram 1F8E0C02-58A9-4E34-AE22-2B63745FA101:AAPL,ig-platform-id=0x0D220003 Link to comment Share on other sites More sharing options...
davidm71 Posted December 21, 2015 Share Posted December 21, 2015 Got another stupid question if anyone can answer it.. Can hermitshell module be put into a bios by itself or is it dependant on Oz? Also be cool to throw an efi version of Memtest86 into your bios into your boot options like hermitshell so it appears as a drive boot option. Wish I knew how.. Link to comment Share on other sites More sharing options...
dijitalxyz Posted January 18, 2016 Share Posted January 18, 2016 I extracted 25q64 image with chip programmerdumped orjinal image and extracted 3 partDesc. regionME regionBIOS regionI have other hand OSMO patched BIOS regionI bind of all and new and patched dumpBut I flashed Board not started only power led blinking Link to comment Share on other sites More sharing options...
jbalint88 Posted February 9, 2016 Share Posted February 9, 2016 WARNING: Flashing your BIOS is dangerous use with caution: This guide is to show a much simpler way to inject the Ozmosis files into your own UEFI BIOS using MMTool. (Note: You must do this in either Windows or in a VM of Windows) 1. Download the attached files : 2. You need to download your own UEFI BIOS from your motherboard website (example shown is Z97X-SLI F6 BIOS) 3. Extract the Ozmosis.zip file and you will see 3 more zipped files inside that, also extract those files. This is what you should see after everything is extracted: 4. Open MMTool and Click Load Image, find your UEFI BIOS that you downloaded earlier (change Files of type to All Files) 5. Click the Extract tab and under Extract FFS Options click Extract UnCompressed, in the lower window look for CORE_DXE and select it (see below) 6. Click Browse and select the extracted folder that you unzipped earlier and in the File Name portion Type CORE_DXE and click Save then Click Extract. 7. Next click the Delete Tab and again select the CORE_DXE in the lower window and click Delete 8. Next select the FileSystem in the lower window and click Delete 9. Next click the Insert Tab and in the Vol. Index make sure you are using 02:01-00, under Insert FFS Options select Insert Compressed, click Browse and select CORE_DXE that you extracted earlier and click Open the click Insert 10. Repeat Step 9 for EnhancedFat, HfsPlus, PartitionDxe, Ozmosis, HermitShellX64, OzmosisDefaults, SmcEmulatorKext, (Optional: VoodooHdaKext, OzmosisBlackTheme) 11. Once you have completed Step 10 scroll down in the lower window and look to make sure you have everything inserted 12. Click Create Report 13. GoTo the folder where your BIOS was and find the report file with a .rpt extension and open with NotePad 14. Scroll down under Firmware Volume : 02 and find the section in the previous screenshot and make sure you have plenty of free space 15. Close NotePad and click Save Image in MMTool 16. Now pick your favorite flashing tool of your choice and enjoy Ozmosis Awesome guide PAVO - I may have missed it, but do you have a new link to the most recent OZMOSIS files to inject into my UEFI? I believe it's 167X-MASS. Again I may have missed it but I believe the osmosis.zip file is 1669 version in the first post. 1 Link to comment Share on other sites More sharing options...
omone Posted April 9, 2016 Share Posted April 9, 2016 I extracted 25q64 image with chip programmer dumped orjinal image and extracted 3 part Desc. region ME region BIOS region I have other hand OSMO patched BIOS region I bind of all and new and patched dump But I flashed Board not started only power led blinking Why you don't try with the original bios, and only after you are sure is all ok you try with bios modded? Link to comment Share on other sites More sharing options...
JustAnotherPUser Posted May 5, 2016 Share Posted May 5, 2016 Is this guide work with Z170 chipset ? i tried to do that with the bios of my Asus Maximus VIII formula but can't find Core_DXE can you help me please ? Link to comment Share on other sites More sharing options...
omone Posted June 20, 2016 Share Posted June 20, 2016 Now work only to the last z-h97, for z-h170 you need to wait Inviato dal mio iPad utilizzando Tapatalk Link to comment Share on other sites More sharing options...
Valkiry Posted July 17, 2016 Share Posted July 17, 2016 Any chance of this working on Asus sabertooth 990FX r2.0? Thanks Link to comment Share on other sites More sharing options...
Pavo Posted July 17, 2016 Author Share Posted July 17, 2016 Any chance of this working on Asus sabertooth 990FX r2.0? Thanks Doe not work with AMD CPUs sorry only Intel Link to comment Share on other sites More sharing options...
Valkiry Posted July 18, 2016 Share Posted July 18, 2016 Thank you for your fast reply So let me guess a DSDT edit is best for me? Link to comment Share on other sites More sharing options...
Pavo Posted July 18, 2016 Author Share Posted July 18, 2016 Thank you for your fast reply So let me guess a DSDT edit is best for me? AMD CPUs require a completely different kernel Link to comment Share on other sites More sharing options...
surfer96822 Posted October 1, 2016 Share Posted October 1, 2016 Hi. Any hope for Ozmosis for MSI X99 MB? Link to comment Share on other sites More sharing options...
Matthew82 Posted October 2, 2016 Share Posted October 2, 2016 And Asus X99? Link to comment Share on other sites More sharing options...
gazza35 Posted November 13, 2016 Share Posted November 13, 2016 Will this work on any uefi bios?, on intel based systems ? Link to comment Share on other sites More sharing options...
crusher Posted November 13, 2016 Share Posted November 13, 2016 Will this work on any uefi bios?, on intel based systems ? If you have a space!!! 1 Link to comment Share on other sites More sharing options...
gazza35 Posted November 13, 2016 Share Posted November 13, 2016 Thnx, was trying it but my bios seemed to have a load of free space afterwards so i chickened out of flashing it lol, gonna upgrade to a dual bios board, then ill try again. Link to comment Share on other sites More sharing options...
crusher Posted November 13, 2016 Share Posted November 13, 2016 Thnx, was trying it but my bios seemed to have a load of free space afterwards so i chickened out of flashing it lol, gonna upgrade to a dual bios board, then ill try again. here you go: Link to comment Share on other sites More sharing options...
BALDY_MAN Posted January 10, 2017 Share Posted January 10, 2017 HI All happy new year I would be grateful if someone with a bit more knowlage. on bios coding would be so kind as to check out my bios file I tried to mod for a gigabyte z97p-d3. I tink i have followed all the steps. and it as flashed ok but nothing seemed to have changed from the unmoded bios Moded bios file.zip Link to comment Share on other sites More sharing options...
cecekpawon Posted January 11, 2017 Share Posted January 11, 2017 Seem you forgot to insert oz core into your firmware Link to comment Share on other sites More sharing options...
BALDY_MAN Posted January 11, 2017 Share Posted January 11, 2017 @ cecekpawon thank you very much for your help I will try it later today Link to comment Share on other sites More sharing options...
BALDY_MAN Posted January 11, 2017 Share Posted January 11, 2017 I tried the bios it loaded fine but it would not boot my clover Sierra hard drive (the progress bar would go slow and then stay on a black screen. also I could not get in to the bios settings (just a black screen) I could boot into windows from my other hard drive. tried to instal from a vanilla boot usb but couldn't see usb. so had to refresh to standard F8 bios using @ bios in windows7 64 bit. my install in now working Again and booting from clover. Link to comment Share on other sites More sharing options...
cecekpawon Posted January 11, 2017 Share Posted January 11, 2017 Im not sure if "Option+Command+P+R" can help you, from this old guide you can call it from F12 menu, Ozmosis GUI, Shell or BIOS Setup. You may need OzmosisBlackTheme to run GUI. Try to boot with IGPU only with a proper "AAPL,ig-platform-id". Remove any kexts except fakesmc until you reach the desktop / completing installation. Disable SIP. Manually bless installer boot.efi. 1 Link to comment Share on other sites More sharing options...
corno77 Posted April 7, 2017 Share Posted April 7, 2017 Hi Pavo and Cecekpawon, I would like to try to create an Ozmosis Bios for a Fujitsu Primergy TX100 S3 server. I'm not able to post a direct link to the BIOS file. So hereby attached you can find the original BIOS. In this system are present also an nVidia GT730 with 4GB DD3 on the PCIe 8x slot, and an Asus Xonar DGX audio board on the PCIe 1x slot. Could you please compile the ROM with all the necessary (also the Kext if there is space) for OS X Sierra? Thanks! Primergy TX100 S3 BIOS.ZIP Link to comment Share on other sites More sharing options...
Recommended Posts