[Guide] Install OS X 10.10 on CPU:i7 4770k Bord:Intel DB85FL

Alien::X · September 20, 2014

324112-intel-core-i7-4770k-front-and-bac

Spacial Thanks to

Sugarface

midi

artur-pt

deadman

pokenguyen

Download-Fritz

~~IlhanRaja~~

Onixs

naiclub

Create USB Installer

1. An 8GB or bigger USB drive

2. Obtain a copy of Yosemite 10.10

3. Navigate to where the "Install Yosemite 10.10.app" file is located. Right click on it and select "Show package contents". Go to Contents/SharedSupport and mount "InstallESD.dmg".

3a. Go into Terminal and type the following, and a "BaseSystem" partition should mount on your desktop.

open "/Volumes/OS X Install ESD/BaseSystem.dmg"

4. Using Disk Utility, restore the "Base System" to your MBR-formatted flashdrive.

5. After the restore is complete, you can unmount the "Base System" from the DMG file and rename your USB to "Installer" or similar.

6. On your newly-imaged installer, navigate to System/Installation and delete the alias to "Packages". Open the previously-mounted "OS X Install ESD" and copy the "Packages" folder to where you deleted the alias (System/Installation).

7. Fire up Terminal, and enter the following:

cp "/Volumes/OS X Install ESD/BaseSystem.dmg" /Volumes/Name_of_your_USB/ 
cp "/Volumes/OS X Install ESD/BaseSystem.chunklist" /Volumes/Name_of_your_USB/

8. Copy any extensions you need for booting onto the drive. Everyone needs FakeSMC. Copy these .kext files from /System/Library/Extensions to System/Library/Extensions on your installer USB.

9. Boot into Clover, and go into "options". Change the boot-args to "-v kext-dev-mode=1" and Graphics Injector Manu > FakeID 0x0d22003 ,Exit back to the main menu using the escape key.

10. Select your installer USB and boot it in Clover.

11. Install the OS, but do not reboot after it's done.

12. Open Disk Utility and identify your OS disk identifer: eg disk3s1, disk 1s2, etc.

13. Open Terminal and run the following:

mkdir /Volumes/HD
mount -t hfs /dev/<diskidentifer> /Volumes/HD

and copy your third-party kexts using CP as shown: cp /System/Library/Extensions/XX.kext/ /Volumes/HD/System/Library/Extensions/XX.kext

so, if I wanted to copy FakeSMC.kext:

cp /System/Library/Extensions/FakeSMC.kext/ /Volumes/HD/System/Library/FakeSMC.kext

14. Close Terminal and reboot into the Yosemite partition, using the same boot-args as before

Full QE/CI Intel HD 4600 (Only For DP's)

Install this kext >> https://docs.google....VlXZ01qOXhNVFU/

ADD In Clover Config. Devices > IntelGFX 0x04128086

0x04128086 is My Graphics device ID in DPCI Manager

Screenshot of DPCI Manager ::

https://lh3.googleusercontent.com/eS0ow4U7r8t55lTWRvRMLIVwmaNHU-pZlhogvgD-ILOsXg3XpPsF8WdfEnZoZNk9Q8I7yzyu-pA=w1300-h748

ALC 662v2 VoodooHDA

1. Remove AppleHDA , HDAEnabler , HDAEnabler1 ,HDAEnabler2 etc. kext from S/L/E

2. Rebuild Caches By DPCI Manager

3. Install VoodooHDA For ALC 662v2.mpkg

4. Rebuild Caches By DPCI Manager

5. Restart

Enjoy .....

Attached Files

VoodooHDA For ALC 662v2.mpkg.zip 1.08MB

Alien::X · September 25, 2014

Stuck At missing Bluetooth Controller Transport!!

Boot -s. When you see the prompt "root:"

Then

Type: mount -uw /
Type: cd /System/Library/Extensions
Type: mkdir back
Type: mv AppleIntelHD* AppleIntelF* back/
Type: touch ../Extensions

Type: reboot

Alien::X · October 2, 2014

AppleHDA

Realtek ALC 662v2 (Realtek ALC662 rev-1)

Now Front panel Output Comes with ALC 662v2 Specially for PC and Intel Boards ( AppleHDA from Developer : Golden Master )

Working ::

Back Line Out

Back LineIn

Back Microphone X

Front Headphone

Front Microphone X

Front And Back Panel Microphone Coming Soon........

Attachment

https://docs.google.com/file/d/0ByXGCIAGS_j9aWFRdVRxcy10U00/edit

THNX to naidb

Alien::X · October 5, 2014

HDMI Sound

With this config.plist You will get HDMI Sound [All Credit goes to : toleda ]

config.plist.zip

Alien::X · October 6, 2014

USB 3.0 Fix After Awake From Sleep

Install this kext for USB 3.0

GenericUSBXHCI.kext.zip

Alien::X · October 9, 2014

Worning :: Do not Turn ON FileVault

Alien::X · October 22, 2014

Updated AppleHDA

Realtek ALC 662v2 (Realtek ALC662 rev-1)

Now Front panel Output Comes with ALC 662v2 Specially for PC and Intel Boards ( AppleHDA from Developer : Golden Master )

Working ::

Back Line Out

Back LineIn

Back Microphone

Front Headphone

Not Working ::

Front Microphone X

AppleHDA.kext.zip

Alien::X · October 23, 2014

Glitch on Apple logo

Add lines to <key>KextsToPatch</key> in Config.plist

			<dict>
				<key>Comment</key>
				<string>Second Stage Boot1</string>
				<key>Find</key>
				<data>
				hcB0XUg=
				</data>
				<key>Name</key>
				<string>IOGraphicsFamily</string>
				<key>Replace</key>
				<data>
				McB0W0g=
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>Second Stage Boot2</string>
				<key>Find</key>
				<data>
				QYjE6wM=
				</data>
				<key>Name</key>
				<string>IOGraphicsFamily</string>
				<key>Replace</key>
				<data>
				QYjE6yM=
				</data>
			</dict>

Then restart with "kext-dev-mode=1 -v -s"

Type:::

mount -uw /
touch /System/Library/Extensions
reboot

The normal boot

First boot to Recovery HD

Start with "kext-dev-mode=1 -v -s" on Recovery HD

Type:::

mount -uw /
touch /System/Library/Extensions
reboot

Normal boot with Recovery HD

Alien::X · October 24, 2014

Good news For Intel HD 4600 (OS X 10.10 Final)

Just add ig_Platform_id=0x0d220003 in clover Only for QE/CI , Not for HDMI Audio.......

Alien::X · October 24, 2014

To Disable Tubo Boost

I Disabled Turbo Boost in Firmware but OS X still turbo boosting

Soooo Install this kext to disable turbo boost

DisableTurboBoostBattery.kext.zip

Alien::X · October 25, 2014

For AppleLPC

Add <string>pci8086,8c50</string> In your Info.plist of Kext

Like this ....

			<key>IONameMatch</key>
			<array>
				<string>pci8086,9c43</string>
				<string>pci8086,8c44</string>
				<string>pci8086,8c4b</string>
				<string>pci8086,8c50</string>
				<string>pci8086,1c42</string>
				<string>pci8086,1c44</string>
				<string>pci8086,1c4e</string>
				<string>pci8086,1c4c</string>
				<string>pci8086,1c50</string>
				<string>pci8086,1c4a</string>
				<string>pci8086,1c46</string>
				<string>pci8086,1c5c</string>
				<string>pci8086,1c52</string>
				<string>pci8086,1c54</string>
				<string>pci8086,1c56</string>
				<string>pci8086,1c43</string>
				<string>pci8086,1c4f</string>
				<string>pci8086,1c47</string>
				<string>pci8086,1c4b</string>
				<string>pci8086,1c49</string>
				<string>pci8086,1c41</string>
				<string>pci8086,1c4d</string>
				<string>pci8086,1d41</string>
				<string>pci8086,1e42</string>
				<string>pci8086,1e55</string>
				<string>pci8086,1e58</string>
				<string>pci8086,1e57</string>
				<string>pci8086,1e59</string>
				<string>pci8086,1e5d</string>
				<string>pci8086,1e43</string>
				<string>pci8086,1e56</string>
			</array>

Reinstall Kext and Reboot

Alien::X · January 2, 2015

New Updated AppleHDA with 10.10.2 support

Realtek ALC 662v2 (Realtek ALC662 rev-1)

Working ::

Back Line Out

Back LineIn

Back Microphone

Front Headphone

Not Working ::

Front Microphone X

Add these lines in DSDT



        Device (HDEF)

        {

            Name (_ADR, 0x001B0000)

            Method (_DSM, 4, NotSerialized)

            {

                Store (Package (0x06)

                    {

                        "hda-gfx", 

                        Buffer (0x0A)

                        {

                            "onboard-2"

                        }, 


                        "layout-id", 

                        Buffer (0x04)

                        {

                            0x0C, 0x00, 0x00, 0x00

                        }, 


                        "PinConfigurations", 

                        Buffer (Zero) {}

                    }, Local0)

                DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))

                Return (Local0)

            }

        }

AppleHDA.kext.zip

Sanddy · January 3, 2015

thanks for posing this very useful guide. I too am using Intel DB85fl motherboard with i5 4440 processor. With your guide I am able to get Yosemite installed correctly. Only thing not working is that the graphics card keeps showing 7mb ram. I am using clover and have set the ig_Platform_id=0x0d220003 as well as selected InjectEDID and InjectIntel. Can you point out what I am missing here to get full QT ? Thanks.

Alien::X · January 4, 2015

If no QE/CI then Add IntelGFX 0x04128086 in Clover

But 10.10 Gives Full QE/CI without Add any thing....

Sanddy · February 22, 2015

hey your trick worked. thanks a ton for your help.

Although I am still not being able to get Audio to work. I looked at your post from "2 Jan" downloaded the AppleHDA.kext.zip file and used DPCI Manager to install it. Although I am not sure where to edit the DSDT. Also should I also be editing the config.plist? I am confused. Can you please help me again? Thanks.

Alien::X · February 24, 2015

upload your DSDT here... Send to me

calibre™ · April 11, 2015

@Alien

can you upload your alc662 again please

[Guide] Install OS X 10.10 on CPU:i7 4770k Bord:Intel DB85FL

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites