Glaedr Posted August 12, 2014 Share Posted August 12, 2014 Hello everybody, this morning when I rebooted my Hackintosh system I was greeted by the following lines instead of the usual Chameleon menu: boot0: GPT boot0: test boot0: done I was able to boot from an USB stick which had an OS X installer, and therefore Chameleon, on, but none of the common repairs helped. I tried to reinstall Chameleon, update to the latest SVN non-testing version, install Chameleon in another partition of the same disk on which i had installed Yosemite for testing (it didn't boot from there either), use the well known dd command (without the bs=4096 parameter) even if it doesn't look like the classic 4K sector issue (I do have a WD Caviar Black but as far as I know the 4K sector problem shows up with a "boot0: error" line). I am attaching a DarwinDump hoping some of you will know where to look. Thanks in advance. Link to comment Share on other sites More sharing options...
chris1111 Posted August 12, 2014 Share Posted August 12, 2014 You can try this boot with the usb (Chameleon Installer) on the Mavericks Installation go to disk utility and clic to your partition drive you have Installe . and clic Unmount see this picture Now quit the disk Utility and open the terminal Utility and type this dd if=/usr/standalone/i386/boot1h of=/dev/disk0s2 quit the terminal and quit the Installation , reboot to your HDD Link to comment Share on other sites More sharing options...
Glaedr Posted August 12, 2014 Author Share Posted August 12, 2014 You can try this boot with the usb (Chameleon Installer) on the Mavericks Installation go to disk utility and clic to your partition drive you have Installe . and clic Unmount see this picture Now quit the disk Utility and open the terminal Utility and type this dd if=/usr/standalone/i386/boot1h of=/dev/disk0s2 quit the terminal and quit the Installation , reboot to your HDD That would be the well known dd command I wrote about above...already tried, not working, sorry. Link to comment Share on other sites More sharing options...
gelkamar Posted May 25, 2015 Share Posted May 25, 2015 Hi Glaedr, i wonder if you found any fix for this issue as i have the very same error on boot and it happen suddenly on a 2 years working rig thanks Link to comment Share on other sites More sharing options...
Recommended Posts