Mieze Posted September 25, 2017 Author Share Posted September 25, 2017 I've released Version 2.2.2 of the driver. It fixes a problem which may cause trouble when trying to change the MAC address. Source code is already on GitHub and the prebuilt binary in the download section has been updated too. Good luck! Mieze 4 Link to comment Share on other sites More sharing options...
jya Posted April 2, 2018 Share Posted April 2, 2018 (edited) Can the kext be installed in the clover EFI folder instead? That way I don't have to mess with the system drivers. Edited April 2, 2018 by jya Link to comment Share on other sites More sharing options...
Mieze Posted April 2, 2018 Author Share Posted April 2, 2018 Just now, jya said: Can the kext be installed in the clover EFI folder instead? That way I don't have to mess with the system drivers. Yes! Link to comment Share on other sites More sharing options...
jya Posted April 3, 2018 Share Posted April 3, 2018 15 hours ago, Mieze said: Yes! Awesome. Worked first go. I placed the AtherosE2200Ethernet.kext into the EFI\CLOVER\kext\Other folder, rebooted.. And voila! ethernet card is recognised (This is a Gigabyte X299 Gamin 7 Pro motherboard) Didn't have to mess with the original system drivers and the like... Link to comment Share on other sites More sharing options...
jya Posted April 4, 2018 Share Posted April 4, 2018 Yes! Seeing you got the network card going, could anything entice you to also work on supporting Killer wireless cards? Sent from my SM-G950F using Tapatalk Link to comment Share on other sites More sharing options...
Mieze Posted April 4, 2018 Author Share Posted April 4, 2018 1 hour ago, jya said: Seeing you got the network card going, could anything entice you to also work on supporting Killer wireless cards? Due to the lack of documentation and header files from Apple, it's almost impossible to write a driver for WIFI devices. Besides that, I'm not interested in wireless networking. Sorry! Mieze Link to comment Share on other sites More sharing options...
XantheFIN Posted July 24, 2018 Share Posted July 24, 2018 (edited) Hi On my AR8161 on MSI GP60 it .. *blaablaa..kext didnt load..blaahblaah* Vendor ID: 0x1969 Device ID: 0x1091 I be back if anything... Thanks! P.S. I had cat too. UPDATE#2: I got now it to work. I make stupid way like earlier and finally it loads up your kext to my lan too! I mean i copied yours *.kext to: System/Extensions/IONetworkingFamily.kext/Contents/Plugins/*here* ...and everything fine No crashing and data keeps streaming ! THANK YOU FOR THE DRIVER After moving there i updated cache by opening Kext Utility and letting it do it. Then i moved other one to Clover kext folder. Just to be more detailed if other one looking for this. UPDATE: ALX is not so stable.. i get sometimes kernel panick and if i try direct PC to PC i get quite fast a crash because of this.... So if have interest look i would be interested if support for this LAN could be done? *Dont mind this anymore but left here for as info if anyone looking for* *** Panic Report *** panic(cpu 2 caller 0xffffff8000303555): "thread_invoke: preemption_level 1, possible cause: blocking while holding a spinlock, or within interrupt context"@/Library/Caches/com.apple.xbs/Sources/xnu/xnu-3789.70.16/osfmk/kern/sched_prim.c:2086 Backtrace (CPU 2), Frame : Return Address 0xffffff90db1a3b20 : 0xffffff80002e953c 0xffffff90db1a3ba0 : 0xffffff8000303555 0xffffff90db1a3c20 : 0xffffff80003022be 0xffffff90db1a3c60 : 0xffffff7f80f6cb89 0xffffff90db1a3c80 : 0xffffff7f834c6a18 0xffffff90db1a3d10 : 0xffffff7f834c14f7 0xffffff90db1a3d40 : 0xffffff7f834c14ae 0xffffff90db1a3d80 : 0xffffff7f80f6d2c2 0xffffff90db1a3dc0 : 0xffffff80008bd9ce 0xffffff90db1a3e30 : 0xffffff7f80f6d3a2 0xffffff90db1a3e50 : 0xffffff7f80f6c773 0xffffff90db1a3ec0 : 0xffffff7f80f6c6de 0xffffff90db1a3ee0 : 0xffffff80008bc46f 0xffffff90db1a3f30 : 0xffffff80008bacd1 0xffffff90db1a3f80 : 0xffffff80008ba42c 0xffffff90db1a3fb0 : 0xffffff80002978f7 Kernel Extensions in backtrace: com.apple.iokit.IONetworkingFamily(3.2)[6326DB88-5330-3F0C-91F6-D478AB5E7503]@0xffffff7f80f5b000->0xffffff7f80f8efff com.insanelymac.ALXEthernet(1.0.2)[C19FB641-ED4F-35CC-92F1-E2A843B18848]@0xffffff7f834bd000->0xffffff7f834d4fff dependency: com.apple.iokit.IONetworkingFamily(3.2)[6326DB88-5330-3F0C-91F6-D478AB5E7503]@0xffffff7f80f5b000 dependency: com.apple.iokit.IOPCIFamily(2.9)[3E00E7D2-E569-341D-9BE0-34D5DE491825]@0xffffff7f80b32000 Edited July 28, 2018 by XantheFIN Link to comment Share on other sites More sharing options...
audio geek Posted February 16, 2019 Share Posted February 16, 2019 First. BIG THANKS to this awesome community. Im on a fresh install of Yosemite and it's prey clean. I''ll post what looks like the error code below. but I am having weird droppouts while watching streaming media after 5-15 minutes or so. Clover Ethernet Inject is selected with a "-" sign bc it seemed to do the trick with iCloud. Thanks in advance. My system details Gigabyte z97 Gaming 7 i7 4790k clocked to 4.6 Turbo Atheros kext 2.2.2 in S/L/E Kext in others folder AppleALC CodecCommander FakeSMC and sensors Lilu USBInjectAll WhateverGreen This is where I think the problem lies but I'm not a code guy 2/15/19 7:54:47.000 PM kernel[0]: Ethernet [AtherosE2200]: Link down on en0 2/15/19 7:54:48.061 PM networkd[177]: +[NETLedBelly stopFastFail] Clearing ledbelly failure cache 2/15/19 7:54:48.066 PM configd[45]: network changed: v4(en0-:192.168.2.22) DNS- Proxy- 2/15/19 7:54:29.199 PM SWBQuicktimeProcess[893]: Using non-persistent logging 2/15/19 7:54:29.202 PM SWBQuicktimeProcess[893]: Logging now: Disabled 2/15/19 7:54:29.439 PM SWBQuicktimeProcess[893]: QuickTime initialized OK 2/15/19 7:54:29.503 PM mDNSResponder[84]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FF744803160 Z-HaX.local. (AAAA) that's already in the list 2/15/19 7:54:29.504 PM mDNSResponder[84]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FF7448035F0 7.1.D.E.F.B.E.F.F.F.C.5.D.8.2.4.0.0.0.0.0.0.0.0.0.0.0.0.0.8.E.F.ip6.arpa. (PTR) that's already in the list 2/15/19 7:54:29.504 PM mDNSResponder[84]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FF746804760 Z-HaX.local. (Addr) that's already in the list 2/15/19 7:54:29.504 PM mDNSResponder[84]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FF746804BF0 22.2.168.192.in-addr.arpa. (PTR) that's already in the list 2/15/19 7:54:29.859 PM com.apple.WebKit.Networking[828]: NSURLConnection/CFURLConnection HTTP load failed (kCFStreamErrorDomainSSL, -9813) 2/15/19 7:54:47.000 PM kernel[0]: Ethernet [AtherosE2200]: Link down on en0 2/15/19 7:54:48.061 PM networkd[177]: +[NETLedBelly stopFastFail] Clearing ledbelly failure cache 2/15/19 7:54:48.066 PM configd[45]: network changed: v4(en0-:192.168.2.22) DNS- Proxy- 2/15/19 7:54:48.072 PM netbiosd[798]: network_reachability_changed : network is not reachable, netbiosd is shutting down 2/15/19 7:54:48.117 PM Dropbox[406]: [0215/195448.117034:WARNING:dns_config_service_posix.cc(326)] Failed to read DnsConfig. 2/15/19 7:54:49.325 PM mDNSResponder[84]: mDNS_Execute: SendResponses didn't send all its responses; will try again in one second 2/15/19 7:54:50.096 PM mDNSResponder[84]: AwdlD2d AwdlD2dStopBrowsingForKey: '_raop' Browsing service stopped 2/15/19 7:54:50.097 PM mDNSResponder[84]: AwdlD2d AwdlD2dStopBrowsingForKey: '_airplay' Browsing service stopped 2/15/19 7:54:50.319 PM mDNSResponder[84]: mDNS_Execute: SendResponses didn't send all its responses; will try again in one second 2/15/19 7:54:50.000 PM kernel[0]: Ethernet [AtherosE2200]: Link up on en0, 1-Gigabit, full-duplex, Rx/Tx flow-control, energy-efficient-ethernet 2/15/19 7:54:51.319 PM mDNSResponder[84]: mDNS_Execute: SendResponses didn't send all its responses; will try again in one second 2/15/19 7:54:52.133 PM SWBQuicktimeProcess[895]: Using non-persistent logging 2/15/19 7:54:52.138 PM SWBQuicktimeProcess[895]: Logging now: Disabled 2/15/19 7:54:52.208 PM SWBQuicktimeProcess[895]: QuickTime initialized OK 2/15/19 7:54:52.241 PM mDNSResponder[84]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FF744804D60 Z-HaX.local. (Addr) that's already in the list 2/15/19 7:54:52.241 PM mDNSResponder[84]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FF7448051F0 1.0.0.127.in-addr.arpa. (PTR) that's already in the list 2/15/19 7:54:52.241 PM mDNSResponder[84]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FF747002360 Z-HaX.local. (AAAA) that's already in the list 2/15/19 7:54:52.241 PM mDNSResponder[84]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FF7470027F0 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.8.E.F.ip6.arpa. (PTR) that's already in the list 2/15/19 7:54:52.477 PM networkd[177]: +[NETLedBelly stopFastFail] Clearing ledbelly failure cache 2/15/19 7:54:52.478 PM configd[45]: network changed: v4(en0+:192.168.2.22) DNS+ Proxy+ SMB 2/15/19 7:54:54.683 PM mDNSResponder[84]: AwdlD2d AwdlD2dStartBrowsingForKey: '_raop' Browsing service started 2/15/19 7:54:54.683 PM mDNSResponder[84]: AwdlD2d AwdlD2dStartBrowsingForKey: '_airplay' Browsing service started 2/15/19 7:55:10.987 PM Console[908]: Failed to connect (_consoleX) outlet from (NSApplication) to (ConsoleX): missing setter or instance variable 2/15/19 7:55:12.124 PM SWBQuicktimeProcess[910]: Using non-persistent logging 2/15/19 7:55:12.127 PM SWBQuicktimeProcess[910]: Logging now: Disabled 2/15/19 7:55:12.312 PM SWBQuicktimeProcess[910]: QuickTime initialized OK config-no SMBIOS.plist Link to comment Share on other sites More sharing options...
audio geek Posted February 16, 2019 Share Posted February 16, 2019 PS I am getting there every 20 seconds but it doesn't show any real issues in my system: 2/15/19 8:31:38.379 PM mDNSResponder[84]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FF744803160 Z-HaX.local. (AAAA) that's already in the list 2/15/19 8:31:38.379 PM mDNSResponder[84]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FF7448035F0 7.1.D.E.F.B.E.F.F.F.C.5.D.8.2.4.0.0.0.0.0.0.0.0.0.0.0.0.0.8.E.F.ip6.arpa. (PTR) that's already in the list 2/15/19 8:31:38.379 PM mDNSResponder[84]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FF746804760 Z-HaX.local. (Addr) that's already in the list 2/15/19 8:31:38.379 PM mDNSResponder[84]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FF746804BF0 22.2.168.192.in-addr.arpa. (PTR) that's already in the list Link to comment Share on other sites More sharing options...
Mieze Posted February 16, 2019 Author Share Posted February 16, 2019 (edited) @audio geekThis is not a driver issue as it originates in the higher levels of the network stack. In case you you got infrequent connection dropouts you might want to disable EEE as it may cause this problem. Edited February 16, 2019 by Mieze Link to comment Share on other sites More sharing options...
audio geek Posted February 16, 2019 Share Posted February 16, 2019 wow dude! thanks for your quick response. Can you point me anywhere to research? maybe DNS issues? I'me using google DNS 8.8.8.8 Link to comment Share on other sites More sharing options...
Mieze Posted February 16, 2019 Author Share Posted February 16, 2019 Sorry, no idea at the moment and I don't have the time to get involved because I'm very busy with preparations for an exam at university next week. 1 Link to comment Share on other sites More sharing options...
audio geek Posted February 16, 2019 Share Posted February 16, 2019 I think I got it. I think Yosemite likes DNS coming from the router. I assigned the router w DNS and assigned manual dress w DHCP for the Hack to get the DNS from the router. Seems solid now. 1 Link to comment Share on other sites More sharing options...
Mieze Posted February 16, 2019 Author Share Posted February 16, 2019 @audio geek Congratulations! Link to comment Share on other sites More sharing options...
Mieze Posted May 9, 2019 Author Share Posted May 9, 2019 (edited) Here is a new development version (2.3.0d0, release and debug build) of the driver which I'm using for some time now without experiencing any problems. It's build for Mojave and requires at least version 10.14.0 but you may also use it with High Sierra, provided you build from source instead of using the prebuilt binary. Source code can be found on Github. Good luck! Mieze AtherosE2200Ethernet-V2.3.0d0.zip Edited May 15, 2019 by Mieze Fixed typo. 1 Link to comment Share on other sites More sharing options...
syn909 Posted May 10, 2019 Share Posted May 10, 2019 19 hours ago, Mieze said: Here is a new development version (2.3.0d0, release and debug build) of the driver which I'm using for some time now without experiencing any problems. It's build for Mojave and requires at least version 10.14.0 but you may also use it with High Sierra, provided you build from source instead of using the prebuilt binary. Source code an be found on Github. Good luck! Mieze AtherosE2200Ethernet-V2.3.0d0.zip Is it possible anyone can compile from source for High Sierra for those of us with nvidia cards that are still stuck on 10.3? :D Thanks Link to comment Share on other sites More sharing options...
Mieze Posted May 10, 2019 Author Share Posted May 10, 2019 12 minutes ago, syn909 said: Is it possible anyone can compile from source for High Sierra for those of us with nvidia cards that are still stuck on 10.3? You can do it yourself. Install Xcode 9, open the project, choose 10.13 SDK and 10.13 as deployment target, and select "Archive" from the "Products" menu. Save the built driver somewhere and install it on your system. Mieze Link to comment Share on other sites More sharing options...
Mison Posted July 5, 2019 Share Posted July 5, 2019 (edited) Does the e2500 support? PCI\VEN_10EC&DEV_2502&SUBSYS_08EB1028&REV_1F Edited July 5, 2019 by Mison Link to comment Share on other sites More sharing options...
Mieze Posted July 5, 2019 Author Share Posted July 5, 2019 @Mison Yes! Link to comment Share on other sites More sharing options...
Slice Posted July 5, 2019 Share Posted July 5, 2019 10 hours ago, Mison said: Does the e2500 support? PCI\VEN_10EC&DEV_2502&SUBSYS_08EB1028&REV_1F Vendor 10ec??? It is Realtek! Link to comment Share on other sites More sharing options...
Mieze Posted July 6, 2019 Author Share Posted July 6, 2019 @Mison Looks like you are confusing something because Killer Ethernet Controllers are Qualcomm Atheros products but the device ID you posted seems to be one of a completely different device. What's wrong? Is it a Killer NIC or a Realtek device? Link to comment Share on other sites More sharing options...
Mison Posted July 8, 2019 Share Posted July 8, 2019 On 7/7/2019 at 4:16 AM, Mieze said: @Mison Looks like you are confusing something because Killer Ethernet Controllers are Qualcomm Atheros products but the device ID you posted seems to be one of a completely different device. What's wrong? Is it a Killer NIC or a Realtek device? I'm really confused! But the id is true. I have a laptop DELL G7 7590 with Killer E2500 Gigabit Ethernet Controller. Link to comment Share on other sites More sharing options...
Mieze Posted August 1, 2019 Author Share Posted August 1, 2019 I just uploaded the prebuilt binary of version 2.3.0 (requires Mojave) to the downloads section and pushed the source code to the repository on GitHub. In case you still need support for High Sierra or Sierra please build from source after changing the deployment target to your system (10.13 or 10.12) using the version of Xcode which corresponds to your macOS version. Have fun! Mieze 1 Link to comment Share on other sites More sharing options...
yekta Posted August 3, 2019 Share Posted August 3, 2019 I have Gigabyte z170x gaming 3 with Killer E2201 LAN chip, on a fresh install of Mojave 10.14.6 when I install AtherosE2200Ethernet, my computer goes super slow.opening an app like Chrome take more than 5 min and its freeze constantly.as soon as remove the network interface or make it inactive, everything back to normal.I tired AtherosE2200Ethernet v2.1.0 AtherosE2200Ethernet v2.2.2 and AtherosE2200Ethernet v2.3.0 they all have the same problem.I didn't have any problem in 10.14.5 it's only happened after updating to 10.14.6 Link to comment Share on other sites More sharing options...
Mieze Posted August 3, 2019 Author Share Posted August 3, 2019 @yekta Fix your system because this is not a driver issue!!! You might want to try do recreate system caches as described on page one of this thread. If it doesn't help, search somewhere else! Mieze Link to comment Share on other sites More sharing options...
Recommended Posts