macgihan Posted November 8, 2015 Share Posted November 8, 2015 Dell Inspiron 3x37-5x37-7x37 Clover Install Guide(Yosemite/El capitan) Link to comment Share on other sites More sharing options...
basith Posted April 9, 2016 Share Posted April 9, 2016 hey,their i followed the guide as it is everything went well the bootloader comes up,it says installing 6 mins to go and restarts automatically and the installation starts from the begining..iam trying to install yosemite 10.10.1 any help? Note:my hdd is already in gpt format so i created a partition using windows and tried to install on it by formatting it to mac os journal extended using disk utility during the setup process. Link to comment Share on other sites More sharing options...
godbolt Posted April 27, 2016 Share Posted April 27, 2016 hello there i have a 3521 with an ati 7670m followed the guide and installed yosemite and running without errors. however, when i extract dsdt with clover f4, i dont have any ssdt-7, ssdt-8 or ssdt-9 as told in the guide. last one is ssdt-6. ati 7670m is not working despite it is shown in clover menu and system report. is there a way to make it work instead of hd4000 ? thx for the help. Link to comment Share on other sites More sharing options...
annabel82 Posted May 13, 2016 Share Posted May 13, 2016 If you're struggling to create your 2 partition USB: :- Plug in USB :- Open Terminal.app :- "diskutil list" and find the disk number of the drive eg: "/dev/disk2" NEXT PART WILL NOT PROMPT FOR CONFIRMATION AND THERE ISN'T A TRIVIAL WAY TO UNDO THIS SO MAKE SURE YOU HAVE THE CORRECT DISK NUMBER :- diskutil partitionDisk /dev/diskX 2 GPT "MS-DOS FAT32" CLOVER 1G "Journaled HFS+" Untitled R (replacing diskX with the number of your disk, eg: disk2) Link to comment Share on other sites More sharing options...
Markf028 Posted October 17, 2016 Share Posted October 17, 2016 Hey guys, Used this guide and it works brilliantly! However, i'd like to update to Sierra, I have downloaded it from the App Store, only, where do I go from here? Thanks Link to comment Share on other sites More sharing options...
malkabani Posted December 26, 2016 Share Posted December 26, 2016 thank you for this guide can you update it to install mac os 10.12 also if I have Yosemite installed in my laptop how to upgrade os to Sierra thanks Link to comment Share on other sites More sharing options...
lezardon Posted June 20, 2017 Share Posted June 20, 2017 I have a laptop Dell Inspiron 15 3521 (upggraded with 1 SSD Crucial + 8GB RAM). I have successfully installed Sierra 10.12.5.on my dual boot with Windows 10. CPU power Management = ok (intellipower gadget swings from 800 to 1800GHZ) Accelerated graphics HD4000 = ok Ethernet = ok USB 2 + USB3 =ok Wifi N = ok (replaced the card with a Broadcom) Trackpad + keyboard = ok Sound = ok (used HDA Patcher 1.7) Volume with key shortcut fn+F11/F12 = ok Brithness with key shortcut fn + F4/F5 = ok Apple nightshift = ok CD/DVDrom = ok Sleep = ok Icloud with all options = ok facetime/iMessage = ok Applestore = ok Itunes with store = ok siri = ok Time Machine = ok dual boot with windows 10 = ok Everything is ok, except card reader. Link to comment Share on other sites More sharing options...
Luigi_ra Posted July 20, 2017 Share Posted July 20, 2017 I have a laptop Dell Inspiron 15 3521 (upggraded with 1 SSD Crucial + 8GB RAM). I have successfully installed Sierra 10.12.5.on my dual boot with Windows 10. CPU power Management = ok (intellipower gadget swings from 800 to 1800GHZ) Accelerated graphics HD4000 = ok Ethernet = ok USB 2 + USB3 =ok Wifi N = ok (replaced the card with a Broadcom) Trackpad + keyboard = ok Sound = ok (used HDA Patcher 1.7) Volume with key shortcut fn+F11/F12 = ok Brithness with key shortcut fn + F4/F5 = ok Apple nightshift = ok CD/DVDrom = ok Sleep = ok Icloud with all options = ok facetime/iMessage = ok Applestore = ok Itunes with store = ok siri = ok Time Machine = ok dual boot with windows 10 = ok Everything is ok, except card reader. How can u archive that? I can't make work well brightness keys, it goes to maximum or minimum with one press and only function once. at 10.10.5 i have a more range of brightness levels, in 10.12.5 the minimum brightness is not the same, is too bright. Link to comment Share on other sites More sharing options...
lezardon Posted July 20, 2017 Share Posted July 20, 2017 I used this guide: https://www.tonymacx86.com/threads/guide-laptop-backlight-control-using-applebacklightinjector-kext.218222/ Brigthness keys work well actually. AppleBacklightInjector.kext.zip config.plist.zip Link to comment Share on other sites More sharing options...
Luigi_ra Posted July 21, 2017 Share Posted July 21, 2017 I used this guide: https://www.tonymacx86.com/threads/guide-laptop-backlight-control-using-applebacklightinjector-kext.218222/ Brigthness keys work well actually. Thanks a lot! it really works! Link to comment Share on other sites More sharing options...
gagua50 Posted July 23, 2017 Share Posted July 23, 2017 I have a laptop Dell Inspiron 15 3521 (upggraded with 1 SSD Crucial + 8GB RAM). I have successfully installed Sierra 10.12.5.on my dual boot with Windows 10. CPU power Management = ok (intellipower gadget swings from 800 to 1800GHZ) Accelerated graphics HD4000 = ok Ethernet = ok USB 2 + USB3 =ok Wifi N = ok (replaced the card with a Broadcom) Trackpad + keyboard = ok Sound = ok (used HDA Patcher 1.7) Volume with key shortcut fn+F11/F12 = ok Brithness with key shortcut fn + F4/F5 = ok Apple nightshift = ok CD/DVDrom = ok Sleep = ok Icloud with all options = ok facetime/iMessage = ok Applestore = ok Itunes with store = ok siri = ok Time Machine = ok dual boot with windows 10 = ok Everything is ok, except card reader. Can you send me your config.plist? Im having big trouble in hd4000 graphics Link to comment Share on other sites More sharing options...
lezardon Posted July 23, 2017 Share Posted July 23, 2017 as per my config, HD4000 does not requires heavy config. Make sure you tick "Inject Intel" and you inject "0x01668086" in Fake ID in clover (see screenshots).I'm using some kexts from Rehabman (FakePCIID_Intel_GbX + some others). This should run smoothly with full graphics accelerations. Let me know. config.plist.zip Link to comment Share on other sites More sharing options...
gagua50 Posted July 23, 2017 Share Posted July 23, 2017 as per my config, HD4000 does not requires heavy config. Make sure you tick "Inject Intel" and you inject "0x01668086" in Fake ID in clover (see screenshots).I'm using some kexts from Rehabman (FakePCIID_Intel_GbX + some others). This should run smoothly with full graphics accelerations. Let me know. Thanks! I am trying this now. Winch is your screen resolution? I booted now from your config.plist, just changed SMBios, and installed this kexts form Rehabman, but my screen is having a lot of pixels error https://drive.google.com/file/d/0B7hSFlGtCO3OT200S0szdEV0MG8/view?usp=sharing Link to comment Share on other sites More sharing options...
lezardon Posted July 23, 2017 Share Posted July 23, 2017 Well, I would not recommend to use my config.plist as it is. You should just copy/paste the parts you think that can be useful for your laptop, by using Xcode. i especially customized several parts to stick with my config (like memory RAM and so on...). Those would not be relevant for your hardware. That's why in my previous post I have posted some screenshots for you to fine tune your config, based on your hardware. My screeen resolution is 1366 x 768 Have you already a patched SSDT ? If not, use MacIASL and use the following patch, from rehabman repository. Link to comment Share on other sites More sharing options...
gagua50 Posted July 23, 2017 Share Posted July 23, 2017 Ok. I'll do that, actually I tried your just to know if it will works. I haven't patch my dsdt yet, I'll do that and report back. Link to comment Share on other sites More sharing options...
gagua50 Posted July 23, 2017 Share Posted July 23, 2017 Well, I would not recommend to use my config.plist as it is. You should just copy/paste the parts you think that can be useful for your laptop, by using Xcode. i especially customized several parts to stick with my config (like memory RAM and so on...). Those would not be relevant for your hardware. That's why in my previous post I have posted some screenshots for you to fine tune your config, based on your hardware. My screeen resolution is 1366 x 768 Have you already a patched SSDT ? If not, use MacIASL and use the following patch, from rehabman repository. I'm still having graphic problems... I'm thinking in do a new fresh installation and try again. How you proceed your installation? Thanks for all help that you are giving. Link to comment Share on other sites More sharing options...
lezardon Posted July 23, 2017 Share Posted July 23, 2017 How was your SSDT patch ? Link to comment Share on other sites More sharing options...
Recommended Posts