magnifico Posted July 7, 2014 Share Posted July 7, 2014 May be here something can be changed? /System/Library/Extensions/IOHIDFamily.kext/Contents/PlugIns/IOHIDEventDriverSafeBoot.kext/Contents/Info.plist So, Sergey ..how fix ? :surprised: Strange...after two ,three restart of pc ... i dont see spam...uff ...very strange [iOBluetoothHCIController][start] -- completed GeForceSensors (pci1): chipset: GK106 (NVE6) bios: 80.06.28.00 GeForceSensors (pci1): started USB Sound assertion in AppleUSBAudioDevice at line 2166 hfs: mounted DatiMac on device disk4s2 DSMOS has arrived NTFS driver 3.11 [Flags: R/W]. NTFS volume name , version 3.1.IOPPF: XCPM mode [AGPM Controller] build GPUDict by Vendor10deDevice11c0 NTFS-fs error (device /dev/disk3s4, pid 68): ntfs_restart_page_header_is_valid(): $LogFile version 2.0 is not supported. (This driver supports version 1.1 only.) NTFS-fs error (device /dev/disk3s4, pid 68): ntfs_restart_page_header_is_valid(): $LogFile version 2.0 is not supported. (This driver supports version 1.1 only.) NTFS-fs error (device /dev/disk3s4, pid 68): ntfs_logfile_check(): Did not find any restart pages in $LogFile and it was not empty. NTFS-fs warning (device /dev/disk3s4, pid 68): ntfs_system_inodes_get(): $LogFile is not clean. Will not be able to remount read-write. Mount in Windows. VM Swap Subsystem is ON NTFS-fs warning (device /dev/disk3s4, pid 68): ntfs_system_inodes_get(): Windows is hibernated. Will not be able to remount read-write. Run chkdsk. USB Sound assertion in AppleUSBAudioDevice at line 2166 AppleKeyStore:Sending lock change 0 0 [Level 5] [Facility messagetracer] [com.apple.message.domain com.apple.kernel.cs.mismatch] [com.apple.message.signature 1000] [com.apple.message.signature2 53a18aae61685cc356b171ce37cc504048ed45a1] [com.apple.message.signature3 b928c695e1e1a867d5fc392eb8f09e460f3139af] [com.apple.message.summarize YES] 0 [Level 5] [Facility messagetracer] [com.apple.message.domain com.apple.kernel.cs.invalidate] [com.apple.message.signature invalidate] [com.apple.message.signature4 265] [com.apple.message.signature3 GoogleSoftwareUp] [com.apple.message.summarize YES] CODE SIGNING: cs_invalid_page(0x1000): p=265[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page AppleIntelE1000e(Info): e1000e NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx prodimagnifico:~ magnifico$ Again Devil in my pc :mad: Link to comment Share on other sites More sharing options...
Slice Posted July 7, 2014 Share Posted July 7, 2014 Maybe a bug IPG ? On my i dont see Wattage line Schermata 2014-07-07 alle 09.03.58.png Not a bug, this is other version. My version works other way before update. Link to comment Share on other sites More sharing options...
magnifico Posted July 7, 2014 Share Posted July 7, 2014 Not a bug, this is other version. My version works other way before update. Sergey , which version use you ? Link to comment Share on other sites More sharing options...
beasty uk Posted July 8, 2014 Share Posted July 8, 2014 Well i have a evga gtx650ti sc and it worked for ages never had a problem. I installed the nvidia drivers and it worked perfect but i got the odd panic so i removed the nvidia drivers and on reboot lost my screen resolution . I removed nvda_drv=1from the org.boot and did a restart and its woking great now ant had a panic in 3 days but you never no lol. Also i never had to remove nvda_drv=1 before when i went back to osx drivers 10.9.4 is a strange one hope this will help someone Link to comment Share on other sites More sharing options...
Slice Posted July 8, 2014 Share Posted July 8, 2014 Sergey , which version use you ? Rhetorical question? Link to comment Share on other sites More sharing options...
magnifico Posted July 8, 2014 Share Posted July 8, 2014 Rhetorical question? Screen Shot 2014-07-08 at 20.37.30.png Ops ...No, I did not know this version, I've always used the version 3xxx Link to comment Share on other sites More sharing options...
Slice Posted July 9, 2014 Share Posted July 9, 2014 Looks like I lose(?) speedstep after update to 10.9.4. Am I alone or there are the same observation? Screen Shot 2014-07-04 at 23.58.55.png It was my mistake. After reboot I have good speedstep And CPU temperature decreases from 52 to 44. 1 Link to comment Share on other sites More sharing options...
Kynyo Posted July 10, 2014 Share Posted July 10, 2014 Slice what FakeSMC / Plugins are you using? Your 3.3.1? Link to comment Share on other sites More sharing options...
Slice Posted July 12, 2014 Share Posted July 12, 2014 Slice what FakeSMC / Plugins are you using? Your 3.3.1? Sure Link to comment Share on other sites More sharing options...
DoGuiTTo Posted July 17, 2014 Share Posted July 17, 2014 Hi, I had a perfect Hackintosh dual boot (OS X and W8) with Clover UEFI. Everything was working perfectly (Wifi with 5Ghz, Bluethooth, Audio, etc). So today I applied the 10.9.4 update knowing that the only issue would be the HDMI sound (worked fine but I used my speakers). Now, every time I boot into system I got this screen for about 10 seconds and then everything goes OK. I think that its a CLOVER problem because I didn't change config.plist in clover after update. If I disable Inject Intel on CLOVER the system boots fine with QE/CI acceleration enabled too. Does anyone else have the same issue? By the way this is my CLOVER config.plist and also uploaded boot.log. The version of CLOVER is 2747 My specs are: GA-Z87N-WIFI Intel Haswell i5 4750 Azurewave AW-CE123 (changed the original that came with MB) Samsung SDD 840EVO WD 2TB 8GB RAM 27" Philips Monitor Any news about this problem? In 10.9.3 I don't have this issue. Only in 10.9.4 which I'm using. I just have to wait for 10 seconds to get everything perfect. Thanks. Link to comment Share on other sites More sharing options...
Faradis Posted July 18, 2014 Share Posted July 18, 2014 i am getting Black screen after updating it to 10.9.4 with iMac11,3 smbios it won't happen with MacPro3,1 smbios the problem happen with both nvidia driver GE=YES also doesn't help any one pls help My spec: Cpu:Intel Core i7 870 Mother Board: Asus Maximus III Gene(1156 Socket) GpU:Msi Nvidia GTX560Ti Twin Frozr II/OC edition 2GB this is my dsdt with original and modded one DSDT mod and original.zip Link to comment Share on other sites More sharing options...
Slice Posted July 18, 2014 Share Posted July 18, 2014 i am getting Black screen after updating it to 10.9.4 with iMac11,3 smbios it won't happen with MacPro3,1 smbios the problem happen with both nvidia driver GE=YES also doesn't help any one pls help My spec: Cpu:Intel Core i7 870 Mother Board: Asus Maximus III Gene(1156 Socket) GpU:Msi Nvidia GTX560Ti Twin Frozr II/OC edition 2GB this is my dsdt with original and modded one You should attach full DarwinDumper report, not only dsdt. Link to comment Share on other sites More sharing options...
Faradis Posted July 18, 2014 Share Posted July 18, 2014 You should attach full DarwinDumper report, not only dsdt. thanks for the reply ... Here is my full darwin dump report DarwinDumper_2.9.4_Chameleon_2.2_X64_Mav_faradis.zip Link to comment Share on other sites More sharing options...
bushmills Posted July 22, 2014 Share Posted July 22, 2014 update went fine, sound was off but is working now with applehda from 10.9.3 - also trim enabler is working Link to comment Share on other sites More sharing options...
Recommended Posts