drfroman Posted January 3, 2015 Share Posted January 3, 2015 Tried to set 0x01660004, but with it tablet not even boot up , stucking after bluetooth message. Also, do i need a UEFI64-CsmVideoDxe driver? The last time on Mavericks I somehow managed to solve this problem with a resolution without even ig-platform-id and I remember, that i checked CsmVideoDxe.. But not sure. Accidentally lost my clover folder, so have to start from scratch. Maybe someone could provide some good clover configs? Link to comment Share on other sites More sharing options...
midi-sama Posted January 3, 2015 Share Posted January 3, 2015 Try to remove CSM driver from clover since Intel's GPU doesnt need csm support, and try with that ig platform, good luck 1 Link to comment Share on other sites More sharing options...
drfroman Posted January 4, 2015 Share Posted January 4, 2015 Thank you, midi. Removed csm, tried all ig-platform-id, also fake ids, load vbios, patch vbios, setting VRAM to 96, darkwake=0, setting Dual Link to 0/1 etc. But still no luck By the way i have vanilla 10.10 from appstore (nothing cutted off, original intel/capri/fb kexts), with mactableman's config plist and kexts. My only hope if someone post his config.plist with working resolution change. Also generated SMBIOS for MacbookPro 9,2 (Ivy Bridge, core i5/i7) Link to comment Share on other sites More sharing options...
midi-sama Posted January 4, 2015 Share Posted January 4, 2015 Gimme your config.plist please, upload it on dropbox/mega/box/GDrive/iCloud/... Somewhere easy to get to I'll check it OH MY GAWD! DAT CONFIG.PLIST FROM OP IS SO UNCLEAN!!!!! config.plist.zip Try this one and lemme know!! (OMG ) OP CLEAN YOUR CONFIG.PLIST PLEASEEEEE 1 Link to comment Share on other sites More sharing options...
drfroman Posted January 4, 2015 Share Posted January 4, 2015 Thank you for help Tried to boot with your config, but it causing "allocate page"/"cant load kernel cache" errors. Seems some ACPI patches are important. I back to ops config, but booting with first config (ig-platform-id=0x01660004) will stuck after bluetooth message. Second one (ops + duallink/vram + macbookpro9,2) booting successfully, but resolution still not working. Target: https://dl.dropboxusercontent.com/u/63600688/config.plist Working: https://dl.dropboxusercontent.com/u/63600688/config2.plist Link to comment Share on other sites More sharing options...
midi-sama Posted January 4, 2015 Share Posted January 4, 2015 At this point it looks like this tablet have problems, or yours have problems, anyway since I don't have the tablet I can't tell, anyway I think you better remove the VRAM and try 0x01660003 ok? At this point it looks like this tablet have problems, or yours have problems, anyway since I don't have the tablet I can't tell, anyway I think you better remove the VRAM and try 0x01660003 ok? Link to comment Share on other sites More sharing options...
kwjenkins Posted January 4, 2015 Share Posted January 4, 2015 DRfroman—I had the same problem regarding alt screen resolutions other than the base 1980/1080. My issue was introduced when I added the windows install on NYE, the scaled resolutions were available previously. I've been observing the back and forth here regarding the original posters config file, thats the one I've been using. When an external monitor is attached you can adjust the settings, but it didn't seem to fix anything. midi —both tiger and new egg have this computer refurbed for 600$ if you are looking for one. 1 Link to comment Share on other sites More sharing options...
drfroman Posted January 4, 2015 Share Posted January 4, 2015 midi, I tried all values from 0x01660000 to 0x01660009, none works( kwjenkins, i tried to connect external monitor through hdmi, resolution on external monitor changing correctly (without blinking stripes), but not on internal 1 Link to comment Share on other sites More sharing options...
midi-sama Posted January 4, 2015 Share Posted January 4, 2015 guys, if you wanna a higher resolution, you will have to make it HiDPI, and it will look like 1280x720 but really crisp http://www.insanelymac.com/forum/topic/290097-guide-108-add-your-custom-retina-hidpi-resolution-for-your-desktop-display/ look here, and btw, I recommend redoing the whole thing, even if you didn;t touch drivers, just restart over and clean your config.plist, only keep what works for you, you will have to try-and-test, and to do so, remove all the DSDT Patches, then in the clover gui, go to options > DSDT Fix Mask > select the minimum (you must uncheck everything from the config.plist then do this) then try, and when you get the needed patches, you may continue, All those DSDT patches are not nessesary, and they are provided in the exemple config.plist when you first install clover, and it's not good at all to select all of them, read the wiki for more information. @kwjenkins unfortunately newegg and tiger don't send to where I live, at least ebay or amazon, and I try to look for other newer tablets, I need a hackable tablet to replace my bulky computer, since it's getting loose in some parts of it and I don't want to make it worse, since it's my working PC (ALL MY LIFE THERE ), and this (or other) tablet will be only for portability and presentation and minor AutoCAD. Thanks for your information, I appreciate it 1 Link to comment Share on other sites More sharing options...
alex.daoud Posted February 1, 2015 Share Posted February 1, 2015 Hey mactabletman, What's the point of the replaced ACPIPlatform kext in the zip you provide? Does it enhance performance on the tablet in any way? Link to comment Share on other sites More sharing options...
midi-sama Posted February 1, 2015 Share Posted February 1, 2015 What zip? What kext? What zip? What kext? Link to comment Share on other sites More sharing options...
alex.daoud Posted February 2, 2015 Share Posted February 2, 2015 What zip? What kext? What zip? What kext? Sorry! Thought you were the OP of this thread. Corrected my post now. Edit: Maybe you know the answer though? In the OP, there is a zip with Kexts for this tablet. He has provided a previous version of AppleACPIPlatform.kext for some reason. Do you know why? Link to comment Share on other sites More sharing options...
midi-sama Posted February 2, 2015 Share Posted February 2, 2015 Oh ok tho many of the kexts posted there are useless and can be replaced by simple DSDT patches that I cant give now since I dont have the tablet. Oh ok tho many of the kexts posted there are useless and can be replaced by simple DSDT patches that I cant give now since I dont have the tablet. Link to comment Share on other sites More sharing options...
Dicker182 Posted February 17, 2015 Share Posted February 17, 2015 Hey midi, any news about your tablet? Would be so nice to work with you on this project. 1 Link to comment Share on other sites More sharing options...
midi-sama Posted February 17, 2015 Share Posted February 17, 2015 I wish to, I can't find any good tablet with wacom and a changeable wifi chip and upgradable Ram, I have a 8GB ram bar and I can use it, if it has 4GB removable it would be great, and Haswell CPU too :/ ivy is not that good. Im looking for a light cad usage, haswell will do better than ivy. 1 Link to comment Share on other sites More sharing options...
drfroman Posted February 22, 2015 Share Posted February 22, 2015 Hi again, guys! In my situation I really need a properly working resolution change for some fullscreen apps and games. Year ago i somehow managed to fix it on mavericks, but lost my EFI folder (Also it may not work on 10.10 for some reasons). Days of experiments with this thing had been futile. So all I can do is ask someone to fix it and offer 35$ for working resolution change solution for ATIV 700t. Link to comment Share on other sites More sharing options...
midi-sama Posted February 22, 2015 Share Posted February 22, 2015 if you tthink money would help, then buy you another tablet, dude, remake everything from scratch I really dislike those: I GIVE YOU $$ YOU FIX MA CHIT! Link to comment Share on other sites More sharing options...
alex.daoud Posted February 22, 2015 Share Posted February 22, 2015 Hi again, guys! In my situation I really need a properly working resolution change for some fullscreen apps and games. Year ago i somehow managed to fix it on mavericks, but lost my EFI folder (Also it may not work on 10.10 for some reasons). Days of experiments with this thing had been futile. So all I can do is ask someone to fix it and offer 35$ for working resolution change solution for ATIV 700t. Set the resolution in Clover/Chameleon to 1024x768. Link to comment Share on other sites More sharing options...
drfroman Posted February 22, 2015 Share Posted February 22, 2015 Sorry me midi, i really did not want to insult anyone. But i think in our time such investigations require a lot of time/knowledge, time costs money. So if i cant fix, i ask community for help and i'll be happy to give bonus to man, who may spend his time for finding out whats wrong and help all owners of this tablet. Also new tablet is expensive and every tablet has its own issues with hackintosh. I got every pice of hardware working on this machine (even bought external wi-fi) and last thing is correct resolution change. Understand correctly, midi, no offense. Once again, sorry. Alex, it does not help for clover ( Link to comment Share on other sites More sharing options...
midi-sama Posted February 22, 2015 Share Posted February 22, 2015 it's ok, I'm not against paying, but really, if it didn't work, try again from scratch, and btw you didn't post any file to help you with, put your config.plist and then we can help, I'm thinking of buying this tablet, the only thing that makes me not to do so, is the RAM, it's 4GB nothing more, that's really sad that's why I'm looking for something like this tablet with more ram. Link to comment Share on other sites More sharing options...
midi-sama Posted February 26, 2015 Share Posted February 26, 2015 Hmm, I'm really considering buying this device, just before, can someone send me an AIDA64 report file, and the audio is still broken? For AIDA64 please make the report and using the Keyboard too! it's important for me Link to comment Share on other sites More sharing options...
Joe B Posted February 26, 2015 Share Posted February 26, 2015 Hey, has anyone maneged to hijack the home button? I would love to have the "cmd" button there.Also I switched the internal wifi card to a "Broadcom bcm94322hm8l" card which was fully functional OTB in Yosemite but doesn't get recognized in Mavericks. Any suggestions? Hi again, guys! In my situation I really need a properly working resolution change for some fullscreen apps and games. Year ago i somehow managed to fix it on mavericks, but lost my EFI folder (Also it may not work on 10.10 for some reasons). Days of experiments with this thing had been futile. So all I can do is ask someone to fix it and offer 35$ for working resolution change solution for ATIV 700t. This worked for me for resolution change. Set DualLink to 0 in config.plist. <key>Graphics</key> <dict> <key>DualLink</key> <integer>0</integer> <key>Inject</key> <dict> <key>ATI</key> <false/> <key>Intel</key> <true/> <key>NVidia</key> <false/> </dict> </dict> If you want HiDPI resolutions type this in Terminal: sudo defaults write /Library/Preferences/com.apple.windowserver.plist DisplayResolutionEnabled -bool true Download SwitchResX. Install. Start it. Save and reboot and you will have HiDPI resolutions to choose in SwitchResX. This worked for me in Mavericks and Yosemite. Link to comment Share on other sites More sharing options...
midi-sama Posted February 26, 2015 Share Posted February 26, 2015 Hey *boner* (lol what a name xD) Since you have your machine good and up, can you tell me what's working and what's not, I really need to know, and an AIDA64 report would be welcomed too Thanks (and this message is to other members too, and thank you all ) Link to comment Share on other sites More sharing options...
macaholic Posted February 26, 2015 Share Posted February 26, 2015 Thanks u guys for this guide i just got my Ativ this week and i have spent a lot of time setting this thing up now. By now i have everything working except wifi/bluetooth but my new wlan adapter should arrive tomorrow. @midi i tried to start from scratch with the config.plist and u were right a lot of stuff in there is not necessary. The battery indicator is working but the kext provided is out of date it would be better to patch the DSDT to get this working so one could get rid of some kexts too. Touch works with GenericXHCI and Touchbase installed (Touchbase only because of the multitouch gestures the screen works OOB) for the stylus i installed the Wacom Bamboo drivers. Link to comment Share on other sites More sharing options...
midi-sama Posted February 26, 2015 Share Posted February 26, 2015 Thanks for the reply @macaholic So, what works: everything (even Audio?) and you have to pay for the base drivers for gestures, right? so is it worth buying? (and can you link me where you bought it ) Thanks a ton! Link to comment Share on other sites More sharing options...
Recommended Posts