Jump to content

Intel HD 4600 QE/CI Yosemite

wusa

By wusa,
in Intel

 Share
482 posts in this topic

Recommended Posts

rimkashox
rimkashox
Posted
Posted

Framebuffer has 3 DP ports. Motherboard HDMI connector is using a framebuffer DP connector. Consider an edit to the framebuffer. See graphics_Intel_framebuffers, try azul-a patch.

Toleda, azul-b patch worked like a charm... azul-a didn't make the trick, so I installed origin framebuffer kext and retried again with azul-b, that did the trick. Also I'm using your RealtekALC patch for my onboard ALC1150, after patching with azul-b, audio HDMI automagically appeared and working well.

 

When I look into iojones, now I have HDMI DP HDMI. I'm connected to port-number 0x5.

 

So 2 problems solved, no more 10 sec fuzzy screen and HDMI audio fully working ! Thanks man...

One question, my graphic card appears as "Intel Iris Pro 1536 MB", even before the patch, that's not a problem right (allocated memory etc), the VRAM seems more then the normal 1024 MB for an HD 4600 no ?

  • Like 1
Link to comment
Share on other sites
toleda
toleda
Posted
Posted

TOne question, my graphic card appears as "Intel Iris Pro 1536 MB", even before the patch, that's not a problem right (allocated memory etc), the VRAM seems more then the normal 1024 MB for an HD 4600 no ?

A labeling problem caused by the ig-platform-id injection, should be Intel HD4600 Graphics 1536 MB. 1024 MB is normal for HD3000/HD4000 with 8 GB or more of memory.

  • Like 1
Link to comment
Share on other sites
rimkashox
rimkashox
Posted
Posted

Ok perfect, so if I understand you correctly, because I have more then 8 GB of RAM (I have 16), the system allocates 1536 MB of VRAM instead of 1024. For the ig-platform-id, I inject it in DSDT.. Here's my code, I stayed with GFX0, if I renaming it to IGPU in any way possible, but I get a kernel panic every time : / ... I have power management, thanks to your post, and it seems to work well, even for GFX0 so I guess it's good for now.. 

                Device (GFX0)
                {
                    Name (_ADR, 0x00020000)  // _ADR: Address
                    Method (_DSM, 4, NotSerialized)  // _DSM: Device-Specific Method
                    {
                        If (LEqual (Arg2, Zero))
                        {
                            Return (Buffer (One)
                            {
                                 0x03
                            })
                        }

                        Return (Package (0x04)
                        {
                            "AAPL,ig-platform-id", 
                            Buffer (0x04)
                            {
                                 0x03, 0x00, 0x22, 0x0D
                            }, 

                            "hda-gfx", 
                            Buffer (0x0A)
                            {
                                "onboard-1"
                            }
                        })
                    }
                }
Link to comment
Share on other sites
toleda
toleda
Posted
Posted

 

 I have power management, thanks to your post, and it seems to work well, even for GFX0 so I guess it's good for now.. 

IOReg shows no GPU power management.  For native GPU PM, use IGPU or edit AppleGraphicsPowerManagement.kext.  For IGPU dsdt edits, see Post #/HD4600/9 Series in Yosemite AppleHDA HDMI Audio

 

IOReg also shows no Haswell CPU PM.

  • Like 1
Link to comment
Share on other sites
rimkashox
rimkashox
Posted
Posted

IOReg shows no GPU power management.  For native GPU PM, use IGPU or edit AppleGraphicsPowerManagement.kext.  For IGPU dsdt edits, see Post #/HD4600/9 Series in Yosemite AppleHDA HDMI Audio

 

IOReg also shows no Haswell CPU PM.

 

 

Hey man, I installed pm after making the first post.. here's my present ioreg with pm on both... I'll try again to rename GFX0 to IGPU.. Thanks !

iMac 5K.iojones.zip

Link to comment
Share on other sites
  • 6 months later...
applehacks
applehacks
Posted
Posted

I am new to clover and have been mildly successful i think.

 

Z97X UD5H, i7 4790K **Stock speed** 32GB 1600 DDR3 No DSDT or SSDT ALC1150 edits work great!!

 

When I try to inject the values to get QE/CI enabled it fixes the second stage boot garble and snow but I end up with 5MB graphics memory and no acceleration. 

 

<key>Graphics</key>

<dict>
<key>DualLink</key>
<integer>1</integer>
<key>Inject</key>
<dict>
<key>ATI</key>
<false/>
<key>Intel</key>
<true/>
<key>NVidia</key>
<false/>
</dict>
<key>InjectEDID</key>
<true/>
<key>NVCAP</key>
<string>0000000000000000000000000000000000000000</string>
<key>NvidiaSingle</key>
<false/>
<key>VRAM</key>
<integer>0</integer>
<key>VideoPorts</key>
<integer>0</integer>
<key>display-cfg</key>
<string>0000000000000000</string>
<key>ig-platform-id</key>
<string>0x0300220D</string>
</dict>
 
Not sure how to do this?
My FakeID is 0x0412 (Desktop HD4600)
 
No idea what to do and easily confused by all the info out there. Any pointers in the right direction would be appreciated.
Link to comment
Share on other sites
  • 4 months later...
MacKonsti
MacKonsti
Posted
Posted

Try these if somebody has time  :rofl: Got these using this http://pikeralpha.wordpress.com/2014/08/30/appleintelframebufferazul-sh-v2-5-released/ on Yosemite beta 2

 

[ 1 ] : 0x0c060000 - Haswell SDV Mobile GT1 port 0 LVDS, port 5 eDP, port 6 HDMI,

[ 2 ] : 0x0c160000 - Haswell SDV Mobile GT2 port 0 LVDS, port 5 eDP, port 6 HDMI,

[ 3 ] : 0x0c260000 - Haswell SDV Mobile GT3 port 0 LVDS, port 5 eDP, port 6 HDMI, 

[ 4 ] : 0x04060000 - Haswell Mobile GT1 port 0 LVDS, port 5 eDP, port 6 HDMI,

[ 5 ] : 0x04160000 - Haswell Mobile GT2 port 0 LVDS, port 5 eDP, port 6 HDMI,

[ 6 ] : 0x04260000 - Haswell Mobile GT3 port 0 LVDS, port 5 eDP, port 6 HDMI,

[ 7 ] : 0x0d260000 - Haswell CRW Mobile GT3 port 0 LVDS, port 5 eDP, port 6 HDMI,

[ 8 ] : 0x0a160000 - Haswell ULT Mobile GT2 port 0 LVDS, port 5 eDP, port 6 HDMI,

[ 9 ] : 0x0a260000 - Haswell ULT Mobile GT3 port 0 LVDS, port 5 eDP, port 6 HDMI,

[10] : 0x0a260005 - Haswell ULT Mobile GT3 port 0 LVDS, port 5 DisplayPort, port 6 DisplayPort,

[11] : 0x0a260006 - Haswell ULT Mobile GT3 port 0 LVDS, port 5 DisplayPort, port 6 DisplayPort,

[12] : 0x0a2e0008 - Haswell ULT E GT3 port 0 LVDS, port 5 DisplayPort, port 6 DisplayPort,

[13] : 0x0a16000c - Haswell ULT Mobile GT2 port 0 LVDS, port 5 DisplayPort, port 6 DisplayPort,

[14] : 0x0d260007 - Haswell CRW Mobile GT3 port 0 LVDS, port 5 DisplayPort, port 6 DisplayPort, HDMI

[15] : 0x0d220003 - Haswell CRW GT3 port 5 DisplayPort, port 6 DisplayPort, port 7 DisplayPort

[16] : 0x0a2e000a - Haswell ULT E GT3 port 0 LVDS, port 5 DisplayPort, port 6 DisplayPort,

[17] : 0x0a26000a - Haswell ULT Mobile GT3 port 0 LVDS, port 5 DisplayPort, port 6 DisplayPort,

[18] : 0x0a2e000d - Haswell ULT E GT3 port 5 DisplayPort, port 6 DisplayPort, port VGA, 

[19] : 0x0a26000d - Haswell ULT Mobile GT3 port 5 DisplayPort, port 6 DisplayPort, port VGA,

[20] : 0x04120004 - Haswell GT2 port VGA, VGA, VGA

[21] : 0x0412000b - Haswell GT2 port VGA, VGA, VGA

[22] : 0x0d260009 - Haswell CRW Mobile GT3 port 0 LVDS, VGA, VGA, 

 

Hi guys, perhaps you can help with my issue on my MSI Z97i-AC board with i7-4790K processor (HD Graphics 4600 card in BIOS set to 64MB memory, otherwise boot crashes). Latest BIOS for this board used v4.10.

 

My motherboard has HDMI, DVI and DisplayPorts, but for my Dell U2713HM monitor (2560x1440px) to display full native resolution, only DisplayPort can be used as MSI restricted (?) HDMI and DVI to maximum 1920x1200px.

 

The monitor was originally connected via Dual-Link DVI-D cable (by Dell) on an older Nvidia card (GT 9500, I think) and used full native 2560x1440 @ 60Hz resolution without sweat.

 

My new MSI hackintosh can only use the monitor via DP so I purchased a DisplayPort v1.2 cable, hooked it up on Yosemite 10.10.5 using latest Clover, and I can eventually access the desktop OK. The issues, however are:

  • During boot, the switch from apple logo to moving bar has some splitting effect the screen (shredding they call it, I think)
  • Sometimes, when I reach desktop, I briefly get some noise, like DHCP is being activated or sync'ed? But I do get Desktop, natively at 2560x1440 @ 60Hz
  • x1 time out of x3 or x4 times, when rebooting computer from desktop 2560x1440px @ 60Hz to the BIOS boot screen, the monitor very quickly (0.5 sec) shows a banner "No signal, going to sleep" but does not turn ON again (to show BIOS boot screen). It stays with some black screen as if there wasn't a proper sync signal sent by the motherboard's boot process. Monitor seems to freeze; I have to turn monitor OFF then back ON to see something (either OS loading, or desktop)...

Currently using ig-platform-id with 0x0d220003 value in Clover, perhaps changing to another ID will help me with the above issue, especially the "reboot" monitor sync?

 

Note: I don't have complicated settings on Clover, just setting platform ID and Inject Intel = YES. I tried setting "Inject EDID" to YES, but this made OS X see 2 same monitors and it made more of a mess, really. The EDID is not a problem to be detected by default.

 

Thoughts are welcome...

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...