slayer2333 Posted September 16, 2014 Share Posted September 16, 2014 Apple had removed it in DPx & Public Betax ! It's a pity HD4600 mobile version does not work after update to DP8 with PikerAlpha's patchs. Previously it's working perfectly in DP7 ! Still working on my mobile HD4600 with same patches. Link to comment Share on other sites More sharing options...
toleda Posted September 16, 2014 Share Posted September 16, 2014 It's a pity HD4600 mobile version does not work after update to DP8 with PikerAlpha's patchs. Try again. Pike's solution likely works for remaining DPs/Betas and GM. Link to comment Share on other sites More sharing options...
pcpaul Posted September 16, 2014 Share Posted September 16, 2014 dp8/Desktop/HD4600/Azul/0d220003 - working. Works on Beta3 Desktop too, though with all other like 0x04260000, 0x0d260000, 0x0A160000 in "About This Mac" it showed "1024 MB" with this it shows 1536 MB, doest it have any impact on something? with "1024 MB" when I look at Activity Monitor Wired memory usage goes up to 1.60 GB, so it doesn't seem like it affects memory usage. Link to comment Share on other sites More sharing options...
lazzy Posted September 16, 2014 Share Posted September 16, 2014 After updated Yosemite Beta3 it doesn't work. redo again all step. May be i have to reinstall Beta2. (lost kext AppleintelFramebufferAzul and AppleintelHD5000Graphics) @jsl your config and dsdt doesn't works on my g750js. Halt system at boot (I don't know why may be your dsdt is bad i recomplie it shows 14 erros ) can you recheck your dsdt and config can you guide me how to disable nvidia 870M, please. Thanks Link to comment Share on other sites More sharing options...
The Jamice Posted September 17, 2014 Share Posted September 17, 2014 Does the HDMI port work with this fix? I want to use a second display. Link to comment Share on other sites More sharing options...
gygabyte666 Posted September 17, 2014 Share Posted September 17, 2014 Does the HDMI port work with this fix? I want to use a second display. Just tested HDMI with my 0416 setup and mine would KP on connect via IOGraphics. Booting with HDMI connected resulted in the same KP at login. My setup also uses a known/working FB HDMI fix for 10.9.x and it still KPs. So based on that, i'm gonna say no, not yet. Link to comment Share on other sites More sharing options...
jsl Posted September 18, 2014 Share Posted September 18, 2014 Just tested HDMI with my 0416 setup and mine would KP on connect via IOGraphics. Booting with HDMI connected resulted in the same KP at login. My setup also uses a known/working FB HDMI fix for 10.9.x and it still KPs. So based on that, i'm gonna say no, not yet. My experience is different from yours. Using correct AppleIntelFramebufferAzul & AppleIntelHD5000Graphics as well as ig-platform-id = 0x0a26000 my Laptop Asus G750 can get glitch-free Apple Wellcome icon, Login Desktop, and both display from Internal Screen and HDMI display or mDP display at the same time. Also every hardware acceleration (QE/CI) functions are enabled perfectly shown by DVD Player, Open GL bench test, and Open CL test. The key point is : Only plug in HDMI or mDP display after successful Apple Welcome icon appears . For better insurance is after Desktop Login with Finder shown in menu bar ! Link to comment Share on other sites More sharing options...
gygabyte666 Posted September 18, 2014 Share Posted September 18, 2014 My experience is different from yours. Using correct AppleIntelFramebufferAzul & AppleIntelHD5000Graphics as well as ig-platform-id = 0x0a26000 my Laptop Asus G750 can get glitch-free Apple Wellcome icon, Login Desktop, and both display from Internal Screen and HDMI display or mDP display at the same time. Also every hardware acceleration (QE/CI) functions are enabled perfectly shown by DVD Player, Open GL bench test, and Open CL test. The key point is : Only plug in HDMI or mDP display after successful Apple Welcome icon appears . For better insurance is after Desktop Login with Finder shown in menu bar ! I believe you made a typo for your ig-platform though. Mine is 0x0a260006, is that what you are using too? Also, are you using any FB patches? Link to comment Share on other sites More sharing options...
jsl Posted September 18, 2014 Share Posted September 18, 2014 I believe you made a typo for your ig-platform though. Mine is 0x0a260006, is that what you are using too? Also, are you using any FB patches? Using 0x0a260005 or 0a260006 always got glitch during booting on Apple Welcome icon and Login Desktop. Yes, I have patched FB following PikerAlpha's advice. Link to comment Share on other sites More sharing options...
azlvda Posted September 19, 2014 Share Posted September 19, 2014 all done via clover, using clover configurator device/IntelGFX/0x04128086 Graphics/Inject Intel/IG-Platform-ID/0x0a260006 Kernel and kext patches Name : AppleIntelFramebufferAzul find : 3D86801204 Replace : 3D86801604 Name : AppleIntelHD5000Graphics find : 3D868012047410EB5D Replace : 3D868016047410EB5D HP Probook 440 G1 i5 4200M HD4600 3 Link to comment Share on other sites More sharing options...
kitokito Posted September 19, 2014 Share Posted September 19, 2014 Hi everybody , i have intel HD 4600 works partially , I use HDMI port , but not full colour , discreet when open or close any window . can any body get face the same problem and fix it. MB Z87N-WiFi I5-4670k 8 GB ram Adata 256GB SSD Yosemite Beta 3 Link to comment Share on other sites More sharing options...
vjenne Posted September 19, 2014 Share Posted September 19, 2014 all done via clover, using clover configurator device/IntelGFX/0x04128086 Graphics/Inject Intel/IG-Platform-ID/0x0a260006 Kernel and kext patches Name : AppleIntelFramebufferAzul find : 3D86801204 Replace : 3D86801604 Name : AppleIntelHD5000Graphics find : 3D868012047410EB5D Replace : 3D868016047410EB5D HP Probook 440 G1 i5 4200M HD4600 You (all) are my Man! This also works with mavericks using my HD4600mobile!!!!!. (Asus n750jk with NVIDIA 850m) Done in 1 minute... We have to highlight or pin your post.... for future users.... 1 Link to comment Share on other sites More sharing options...
lazzy Posted September 19, 2014 Share Posted September 19, 2014 You (all) are my Man! This also works with mavericks using my HD4600mobile!!!!!. (Asus n750jk with NVIDIA 850m) Done in 1 minute... We have to highlight or pin your post.... for future users.... Can i get you clover config please. I have G750js with nvidia 870M Link to comment Share on other sites More sharing options...
Vlad Posted September 20, 2014 Share Posted September 20, 2014 when I connect the cdmi cable to my laptop I get kernel panic. Does HDMI work for you? Link to comment Share on other sites More sharing options...
lazzy Posted September 20, 2014 Share Posted September 20, 2014 when I connect the cdmi cable to my laptop I get kernel panic. Does HDMI work for you? HDMI works for me in mode Mirroring but when i turn of mirror it glitch Bref glitch at boot (logo apple), Main menu bar at top, move icon in finder, HDMI if mirror doesn't select Link to comment Share on other sites More sharing options...
Vlad Posted September 21, 2014 Share Posted September 21, 2014 what platform id are you using? Link to comment Share on other sites More sharing options...
ArcticFox Posted September 23, 2014 Share Posted September 23, 2014 Anyone having problems with Intel graphics with dual screen now? Since I updated to Beta 3 my main screen is on DVI and my TV on HDMI, I have set the screen to mirror mode and whenever I turn my TV off Yosemite freezes and comes back then every 5 seconds it freezes and comes back again? I've tried rolling back the kexts but it keeps doing it. Link to comment Share on other sites More sharing options...
pcpaul Posted September 26, 2014 Share Posted September 26, 2014 Sometimes I randomly get a lagging cursor, it just very obviously becomes messed up and instead of moving smoothly it moves in "jumps", to make it go back to normal I have to go to preferences-display and toggle Refresh Rate or just reconnect a mouse, mouse is USB. I had this behavior once on mavericks, but after replacing a crappy 350w PSU to 650w haswell compatible one, I've never experienced that problem on mavericks again. I've tried 0x0c160000 0x04260000 0x0d260000 with 0x04260000 it happened once in a about 3 weeks, now I'm testing 0x0d220003. Any one knows wtf it is? Link to comment Share on other sites More sharing options...
ArcticFox Posted September 26, 2014 Share Posted September 26, 2014 That's what happens with mine if I turn off the second screen connected, my TV. When I turn it back on it stops jumping. Link to comment Share on other sites More sharing options...
slayer2333 Posted September 26, 2014 Share Posted September 26, 2014 Sometimes I randomly get a lagging cursor, it just very obviously becomes messed up and instead of moving smoothly it moves in "jumps", to make it go back to normal I have to go to preferences-display and toggle Refresh Rate or just reconnect a mouse, mouse is USB. I had this behavior once on mavericks, but after replacing a crappy 350w PSU to 650w haswell compatible one, I've never experienced that problem on mavericks again. I've tried 0x0c160000 0x04260000 0x0d260000 with 0x04260000 it happened once in a about 3 weeks, now I'm testing 0x0d220003. Any one knows wtf it is? I had the same problem wiyh my mobile HD4600, solved it by rolling back the intel hd kexts from 10.9.1. But make sure to get all related kexts rolled back (intellhd, iographics, ioaccelerator,...). Link to comment Share on other sites More sharing options...
ArcticFox Posted September 27, 2014 Share Posted September 27, 2014 I've tried rolling back kexts, if I go too far then acceleration stops working and screen starts flickering. I had it working in beta 1 great, no issues. Nothing has changed but all of a sudden it's not working anymore. Link to comment Share on other sites More sharing options...
ArcticFox Posted September 30, 2014 Share Posted September 30, 2014 No one is interested in fixing this? I've had to go back to using Windows, this issue is really irritating. Link to comment Share on other sites More sharing options...
Alien::X Posted September 30, 2014 Share Posted September 30, 2014 What fix you need ? Link to comment Share on other sites More sharing options...
ArcticFox Posted September 30, 2014 Share Posted September 30, 2014 I've got HD4600 running with dual screens with QE/CI, but if I turn one of the screens off Yosemite starts freezing every 5 seconds until I turn the second screen back on, the main screen flickers and the freezing stops. I've tried running several platform ids, etc.. Link to comment Share on other sites More sharing options...
Alien::X Posted September 30, 2014 Share Posted September 30, 2014 you need Perfect DSDT and Graphics kext patch Link to comment Share on other sites More sharing options...
Recommended Posts