Grzesiek13 Posted June 13, 2014 Share Posted June 13, 2014 maybe in DP2 there will be still no support for this card. This is just a guessing based on the fact that this happened in the same way with Mavericks HD4600 will still be supported. They've changed few things like in 10.9.3. In first dev release the driver was messed up, no signal through DVI and fuzzy screen via HDMI, the same is in 10.10. What's more ati kexts are also badly injured Link to comment Share on other sites More sharing options...
n3r3d3 Posted June 13, 2014 Share Posted June 13, 2014 ok, my solution is asus GT210 1GB; HDMI 1080p full QE/QC Link to comment Share on other sites More sharing options...
wusa Posted June 14, 2014 Author Share Posted June 14, 2014 Hmm, I guess we should wait for DP2 Link to comment Share on other sites More sharing options...
Tberdy Posted June 14, 2014 Share Posted June 14, 2014 Does someone know when it will be available ? Link to comment Share on other sites More sharing options...
Grzesiek13 Posted June 14, 2014 Share Posted June 14, 2014 Ask Apple Probobly at the end of this month Link to comment Share on other sites More sharing options...
warlikewings Posted June 18, 2014 Share Posted June 18, 2014 DP2 is available now, has anyone tried it yet? Is QE/CI working on the HD4600 yet? I'll update to it tonight and report back later on if nobody else does, but I figured it would be worth asking. Link to comment Share on other sites More sharing options...
gfreige Posted June 18, 2014 Share Posted June 18, 2014 It`s working. Full QE/CI in HD4600 2 Link to comment Share on other sites More sharing options...
warlikewings Posted June 18, 2014 Share Posted June 18, 2014 GOOD! I'm about an hour away from having the dmg. I want to make a bootable stick off this one and skip past DP1 entirely should have to reinstall at all before DP3 now I should be able to get a better look at the OS Link to comment Share on other sites More sharing options...
CEGOCAP Posted June 18, 2014 Share Posted June 18, 2014 It`s working. Full QE/CI in HD4600 how???? i installed dp2 and no qe/ci after adding id to appleintelframebufferazul Link to comment Share on other sites More sharing options...
warlikewings Posted June 18, 2014 Share Posted June 18, 2014 how???? i installed dp2 and no qe/ci after adding id to appleintelframebufferazulAre you using clover's "Inject Intel" and "Inject EDID" options? I'd imagine that would be necessary, at least for me on mavericks that is what I need, and I assume it won't be too different in Yosemite. I still have around 40 mins to go on my download, so I haven't been able to test DP2 yet. But I'm guessing whatever you do for QE/CI In mavericks may still apply in Yosemite. Link to comment Share on other sites More sharing options...
gfreige Posted June 18, 2014 Share Posted June 18, 2014 I added nothing except "Inject Intel" and "Inject EDID" as in 10.9. No ID added. I'm using clover latest version. I'm using 2 monitors via HDMI and DVI without issues except some HDCP sync issues after monitor sleep. Gigabyte GA-Z87X-UD3H with an I7-4770k. I've upgraded from DP1 using 10.10 update 1 in AppStore. 1 Link to comment Share on other sites More sharing options...
CEGOCAP Posted June 18, 2014 Share Posted June 18, 2014 Are you using clover's "Inject Intel" and "Inject EDID" options? I'd imagine that would be necessary, at least for me on mavericks that is what I need, and I assume it won't be too different in Yosemite. I still have around 40 mins to go on my download, so I haven't been able to test DP2 yet. But I'm guessing whatever you do for QE/CI In mavericks may still apply in Yosemite. Yes i use clover for boot mavericks And yosemite in maverick work great but in yosemite not work qe/ci Link to comment Share on other sites More sharing options...
warlikewings Posted June 18, 2014 Share Posted June 18, 2014 Is the latest clover still 2696? I haven't seen any further test posts from slice since, though to be honest, I haven't been looking as hard within the last week. Link to comment Share on other sites More sharing options...
CEGOCAP Posted June 18, 2014 Share Posted June 18, 2014 I added nothing except "Inject Intel" and "Inject EDID" as in 10.9. No ID added. I'm using clover latest version. I'm using 2 monitors via HDMI and DVI without issues except some HDCP sync issues after monitor sleep. Gigabyte GA-Z87X-UD3H with an I7-4770k. I have a laptop a probook 450 g1 with i5 4200m (Intel HD 4600) if i not add id to appleintelframebufferazul the resolution is too low after adding id resolution its fine but no qe/ci Is the latest clover still 2696? I haven't seen any further test posts from slice since, though to be honest, I haven't been looking as hard within the last week. i use clover 2713 and inject edid so i dont understand why not working Link to comment Share on other sites More sharing options...
warlikewings Posted June 18, 2014 Share Posted June 18, 2014 Okay, thanks for letting me know there is a newer clover than what I've got. I'll have to do something about that ASAP. Inject EDID sounds right, but also make sure to check "Inject Intel" also, that's what works on my Envy 17 anyhow. Again, I have not tested this with dp2 yet, I'm only speaking from my experience with mavericks and Yosemite dp1 (dp1 I didn't have any QE/CI on but my resolution was right just with those two settings) try that? Link to comment Share on other sites More sharing options...
gfreige Posted June 18, 2014 Share Posted June 18, 2014 Last clover is 2721 Link to comment Share on other sites More sharing options...
warlikewings Posted June 18, 2014 Share Posted June 18, 2014 Thanks! I'll track that down. Man I fell behind in a week huh? Lol Link to comment Share on other sites More sharing options...
wusa Posted June 18, 2014 Author Share Posted June 18, 2014 Downloading DP2 now, will test HD 4600 after install Link to comment Share on other sites More sharing options...
warlikewings Posted June 18, 2014 Share Posted June 18, 2014 Downloaded, new installer stick is about 8 mins away from done being built, and then I'll give it a test run. Link to comment Share on other sites More sharing options...
Vlad Posted June 18, 2014 Share Posted June 18, 2014 how???? i installed dp2 and no qe/ci after adding id to appleintelframebufferazul this HD 4600 graphics card has 2 device id's. 0x04128086 for desktop PC and 0x04168086 for laptops, based on processors inside. the first device id is present inside both azul framebuffer and appleintelhd5000graphics kext. I also installed DP2 but no QE/CI yet. To enable QE i have to inject a fake device id 0x04128086 using clover to get my card detected. This is because I have a mobile processor with 0x04168086 intel graphics chipset. Link to comment Share on other sites More sharing options...
Vlad Posted June 18, 2014 Share Posted June 18, 2014 any update from anyone? Link to comment Share on other sites More sharing options...
warlikewings Posted June 18, 2014 Share Posted June 18, 2014 So far, I have a black bar at the top now, and my HD 4600 is being detected with 7mb of ram/no kext loaded... Wouldn't just be a matter of adding our device IDs to the info.plist files of the hd5000 kext and possible AppleIntelFrameBufferAzul? Assuming that it's working on the desktop version of the HD4600 and the only reason it isn't for laptops is a difference of device IDs, I would think a quick little info.plist patch would be enough to get it working. 1 Link to comment Share on other sites More sharing options...
wusa Posted June 18, 2014 Author Share Posted June 18, 2014 Tried with ig-platform-id=0x0A260006 and Inject 0x04168086 (Clover) but still not works. Glitches. @warlikewings, have you got your hd 4600 mobile works OOB in 10.10 ? Link to comment Share on other sites More sharing options...
warlikewings Posted June 18, 2014 Share Posted June 18, 2014 Isn't the 0x0A26006 for the intel HD5000 not the HD4600? If I'm right, I wouldn't expect that id to work, but it was worth a shot. Keep at it, and I'll see what I can come up with too. I think adding our device IDs to the info plist is the only way to go at this point though. Tried with ig-platform-id=0x0A260006 and Inject 0x04168086 (Clover) but still not works. Glitches. @warlikewings, have you got your hd 4600 mobile works OOB in 10.10 ? No, my HD4600 is still not working correctly. Hence the black distorted menu bar at the top and 7mb ram, along with the tell tale "no kext loaded" soon hopefully, I'm working on it.If anything OOB (vanilla) support for the mobile HD4600 won't come for another cycle or two (fingers crossed) so we have to try for a work around at this point. Injecting the 0x0412 as a fake ID with clover did nothing but create a not viewable mess. But, I'm sure you already know that! Ugh. I want this working. Link to comment Share on other sites More sharing options...
wusa Posted June 18, 2014 Author Share Posted June 18, 2014 I know that, hmm, I am thinking of replacing with 10.9 kexts Link to comment Share on other sites More sharing options...
Recommended Posts