mrfreeman Posted October 20, 2014 Share Posted October 20, 2014 Last night installed on evga sr2 2x x5650 works like a charm got 32059 geeckbench score Link to comment Share on other sites More sharing options...
d620osx Posted October 20, 2014 Share Posted October 20, 2014 Hi everyone, sorry for the newbie question. The guide says "Copy FakeSMC and Network kexts to /EFI/Clover/kexts/10.10 (you’ll have to create the 10.10 folder}", but I do not know where to find these kexts in order to copy them to the clover kexts folder. I was able to download a FakeSMC kext from one of the posts in this thread, but I do not know where to get the Network kext. Thanks for your help! Provide the full details of your pc and may be someone can suggest which kext you need for your hack. Still no luck... Followed all the directions... After I select USB in the bios boot menu it can't get past the "Loading Operating System..." on black screen. Just sits there for 30+ minutes and more. I tried using Clover_v2k_r2953 and Clover_v2k_r2957. My hack has been running 10.8 and 10.9 for over two years with not one problem. Weird I can't get to boot... I'm no rookie but feel like one! Hi What is the usb formatted as? I had the same problem until I formatted it as mbr at it all worked fine to install. Link to comment Share on other sites More sharing options...
john_s Posted October 20, 2014 Share Posted October 20, 2014 Try with -v when is prompting, you can understand many things when using verbose.Used -v and got a restart at DSMOS has arrived, any ideas?After using clover configurator I managed to enter the white screen withe black progress bar where after 1~2 minutes it stops, no progress bar moving no usb hdd activity, any ideas? Got stuck at the same point with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url].. Link to comment Share on other sites More sharing options...
ZhuangJW Posted October 20, 2014 Share Posted October 20, 2014 Where are I can have the Network kexts ? Link to comment Share on other sites More sharing options...
d620osx Posted October 20, 2014 Share Posted October 20, 2014 Where are I can have the Network kexts ?Are yiu building a new hack or you already have one. If you already have one and using chameleon use the one from the extra folder other find what network card is in your pc/laptop to find the kext required. Link to comment Share on other sites More sharing options...
ZhuangJW Posted October 20, 2014 Share Posted October 20, 2014 Are yiu building a new hack or you already have one. If you already have one and using chameleon use the one from the extra folder other find what network card is in your pc/laptop to find the kext required. I don't have the chameleon 。。 I was error and stop in Sound assertion in AppleHDADriver at line 1051 . I don't know how to do . Link to comment Share on other sites More sharing options...
C.Frio Posted October 20, 2014 Share Posted October 20, 2014 hi... try to boot (edit)..safe mode..and remove appleHDA to see... or remove appleHDA prior boot if you have how... IMHO..some MB I have must do this to boot... nothing to loose.. c.frio Link to comment Share on other sites More sharing options...
ZhuangJW Posted October 20, 2014 Share Posted October 20, 2014 hi... try to boot (edit)..safe mode..and remove appleHDA to see... or remove appleHDA prior boot if you have how... IMHO..some MB I have must do this to boot... nothing to loose.. c.frio Please details to teach . Link to comment Share on other sites More sharing options...
C.Frio Posted October 20, 2014 Share Posted October 20, 2014 hi.. if with clover press space and then safe mode or with chameleon flag with -x c.frio Link to comment Share on other sites More sharing options...
Johnny V Posted October 20, 2014 Share Posted October 20, 2014 Hi What is the usb formatted as? I had the same problem until I formatted it as mbr at it all worked fine to install. Thanks... I just tried a MBR formatted thumb drive but still no luck. Still the same... stalls at "Loading Operating System..." Any other suggestions? Thanks Man! Link to comment Share on other sites More sharing options...
d620osx Posted October 20, 2014 Share Posted October 20, 2014 Is it a pc or laptop? If pc try pulling out the power lead, press the power button. The fans may spin a bit, then try again. Link to comment Share on other sites More sharing options...
HooDude Posted October 20, 2014 Share Posted October 20, 2014 Provide the full details of your pc and may be someone can suggest which kext you need for your hack. Mobo: Asus Sabertooth X79 CPU: Intel i7 3930k RAM: 16 GB (4x4GB) Mushkin Redline DDR3 VGA: Two AMD R9 290x HDD: Crucial M4 128 GB SSD (clean install) Sound Card: Creative X-Fi Titanium Fatal1ty Thanks to anyone who can recommend the proper kexts! Link to comment Share on other sites More sharing options...
telepati Posted October 20, 2014 Share Posted October 20, 2014 I want to share what am I doing and you tell me where am I doing wrong, 1. Format to USB with GUID Partition Table + Mac OS Extended (Journaled) and name it 'Install' 2. Open Terminal and using code on the first page successfully Done as picture down below Last login: Sun Oct 19 23:07:23 on console Murats-Mac:~ MuratOzgul$ sudo /Applications/Install\ OS\ X\ Yosemite.app/Contents/Resources/createinstallmedia --volume /Volumes/Install --applicationpath /Applications/Install\ OS\ X\ Yosemite.app --nointeraction Password: Erasing Disk: 0%... 10%... 20%... 30%... 100%... Copying installer files to disk... Copy complete. Makind disk bootable... Copying boot files... Copy complete. Done. Murats-Mac:~ MuratOzgul$ 3. Opening Clover_v2k_r2953.pkg Continue, Continue, Changed Installation Location with my USB Continue again and Click Customise 4. Choosing this setting on Clover.pkg: 5. Creating 10.10 folder in kext folder and adding my kext: AppleIntelE1000e.kext FakeSMC.kext NullCPUPowerManagement.kext 6. Deleting VBoxHfs-64.efi in the drivers64UEFI and adding HFSPlus.efi 7. Using Standart.config with these boot arg "dart=0 kext-dev-mode=1" Thats it! After that I restart machine and pressing hot ket which is my F12 boot options coming and choosing my installation USB and Install OS X Yosemite Drive coming I hit "enter" and for a while black screen with a white apple logo and white thin loading bar coming. Im waiting, waiting and screen turning black to white or light grey(Im not sure) and my mouse cursor spinning with classic apple rainbow circle on the upper left side on the screen. Like picture 2 down below. Installing screen never comes... What I tried so far; Remove NullCPUPowerManagement.kext --------- didn't work Used Clover Original.config ---------------- didn't work Tried USB 2.0 and USB 3.0 port ----------- didn't work Added GE=Yes to config --------- didn't work Used my own system.config--------------- didn't work Used Clover_v2k_r2953 ------------------- didn't work Used unofficial Clover_v2k_r2957---------didn't work Used Clover_v2k_r2795 ------------------ didn't work I tried verbose mode boot I don't get any error. When verbose boot finished turning picture 2 down below. Actually always stuck in there apple loading screen past and white screen coming with spinning beach ball. My Graphic Card GTX 660 I always used this card with GraphicsEnabler=No. Picture 1 Picture 2 Please tell me now where am I doing wrong or what should I do? Link to comment Share on other sites More sharing options...
AsusFreak Posted October 20, 2014 Author Share Posted October 20, 2014 Don't know why you need dart=1 and you don't need NullCPUPowerManagement.kext... Try starting in safe mode to complete the install, "-x -v kext-dev-mode=1" Link to comment Share on other sites More sharing options...
telepati Posted October 20, 2014 Share Posted October 20, 2014 Don't know why you need dart=1 and you don't need NullCPUPowerManagement.kext... Try starting in safe mode to complete the install, "-x -v kext-dev-mode=1" Still doesn't work. Stuck on Beachball screen again never past installation screen.. Link to comment Share on other sites More sharing options...
AsusFreak Posted October 21, 2014 Author Share Posted October 21, 2014 Don't inject Nivdia Link to comment Share on other sites More sharing options...
justniell Posted October 21, 2014 Share Posted October 21, 2014 I've updated my clover and it's installed on my ESP. There's a little problem here, whenever I boot from clover, it splits the screen into 4.. I've changed the settings in clover using clover configurator but nothing changed.. Is there any way that I can reinstall clover? I don't want to keep booting from USB drive (the USB drive is using chameleon) I can't upload the config yet (now using windows) because my sister is bringing the laptop along with her.. I will upload it once she's back. Oh, you can see the specs in my signature Link to comment Share on other sites More sharing options...
C.Frio Posted October 21, 2014 Share Posted October 21, 2014 hi @HooDude see this site for x79 http://rampagedev.wordpress.com/dsdt-downloads/asus-x79/ c.frio Link to comment Share on other sites More sharing options...
manu89ft Posted October 21, 2014 Share Posted October 21, 2014 I installed yosemite and everything went successfully, but the boot clover does not see my hard drive. I have a thinkpad t61 not UEFI. The bootloader clover sees only the USB keys. has anyone had these problems? Link to comment Share on other sites More sharing options...
john_s Posted October 21, 2014 Share Posted October 21, 2014 Is this a normal thing? Link to comment Share on other sites More sharing options...
justniell Posted October 21, 2014 Share Posted October 21, 2014 I've updated my clover and it's installed on my ESP. There's a little problem here, whenever I boot from clover, it splits the screen into 4.. I've changed the settings in clover using clover configurator but nothing changed.. Is there any way that I can reinstall clover? I don't want to keep booting from USB drive (the USB drive is using chameleon) I can't upload the config yet (now using windows) because my sister is bringing the laptop along with her.. I will upload it once she's back. Oh, you can see the specs in my signature okay so regarding to my previous post, the config is in the attachment.. config.plist.zip Link to comment Share on other sites More sharing options...
john_s Posted October 21, 2014 Share Posted October 21, 2014 My nightmare, i used various settings and possible methods but no luck i have the same results when using alt method with chameleon see what my problem is here https://www.youtube.com/watch?v=iT6H7KujJVA I can't get to the installer. any help appreciated Link to comment Share on other sites More sharing options...
HooDude Posted October 21, 2014 Share Posted October 21, 2014 hi @HooDude see this site for x79 http://rampagedev.wordpress.com/dsdt-downloads/asus-x79/ c.frio Thank you! Link to comment Share on other sites More sharing options...
slemblod Posted October 22, 2014 Share Posted October 22, 2014 I want to share what am I doing and you tell me where am I doing wrong, [...] What I tried so far; Remove NullCPUPowerManagement.kext --------- didn't work Used Clover Original.config ---------------- didn't work Tried USB 2.0 and USB 3.0 port ----------- didn't work Added GE=Yes to config --------- didn't work Used my own system.config--------------- didn't work Used Clover_v2k_r2953 ------------------- didn't work Used unofficial Clover_v2k_r2957---------didn't work Used Clover_v2k_r2795 ------------------ didn't work [...] Please tell me now where am I doing wrong or what should I do? The beachball on boot is usually a sign that FakeSMC is not working properly, at least for me. Try downloading and extracting the binaries from here. (you only need FakeSMC.kext) Link to comment Share on other sites More sharing options...
DelectablefromEU Posted October 22, 2014 Share Posted October 22, 2014 I was also having allot of issues with installing Yosemite. I did the following. I created a Yosemite install USB using http://www.tonymacx86.com/445-[url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]-install-os-x-yosemite-any-supported-intel-based-pc.html tutorial. Once Yosemite was installed, completed step 4 of the tutorial at tonymacx86, I installed Clover and proceeded with configuring the config.plist and Kext (using Kext wizard). Whenever you screwup your config.plist you can reinsert the USB, boot from that and change the settings using Clover Configurator. Took me half a day but everything is working. Link to comment Share on other sites More sharing options...
Recommended Posts