foilage11 Posted July 26, 2014 Share Posted July 26, 2014 Hello! Yes, latest clover, latest fakeSMC in 10.10. Link to comment Share on other sites More sharing options...
frnic Posted July 26, 2014 Share Posted July 26, 2014 Hello all, after following this guide when I attempt to boot the Yosemite USB stick I'm stuck at the gray Apple screen. I don't get the spinning loading animation just a hang at the logo. I also don't have the spacebar option to load with kexts, only to load without kexts. Any suggestions would be appreciated! This is the same symptom I am having - Have you tried hitting space at the Clover prompt after selecting your boot drive and selecting verbose? If I select verbose it will boot successfully. Frank Link to comment Share on other sites More sharing options...
foilage11 Posted July 26, 2014 Share Posted July 26, 2014 Hi Frank, verbose doesn't work for me. I tried making a Clover USB installer for Mavericks the same way to see if that would work and it doesn't either. My hardware: i5-4570s Haswell, Asus Z87 motherboard, HD4600 graphics, 8GB DDR3 1600 MHz. Link to comment Share on other sites More sharing options...
crusher Posted July 26, 2014 Share Posted July 26, 2014 Follow this video.Very,very easy install Yosemite Beta.II set up a video for beginners... https://www.youtube.com/watch?v=6khqe_4JJ5o Link to comment Share on other sites More sharing options...
AsusFreak Posted July 27, 2014 Author Share Posted July 27, 2014 Follow this video.Very,very easy install Yosemite Beta.II set up a video for beginners... Really? Looks a like a real pain in the {censored} to me... But do hope it helps someone... Link to comment Share on other sites More sharing options...
Aide Posted July 27, 2014 Share Posted July 27, 2014 Follow this video.Very,very easy install Yosemite Beta.II set up a video for beginners... https://www.youtube.com/watch?v=6khqe_4JJ5o I'm stuck on the stage in the video where you go to Chameleon Wizard and have to point it to the Chameleon i386 folder - where do I get that from? I assume I have to extract the Chameleon Folder? but how do I do that? Thanks in advance Link to comment Share on other sites More sharing options...
crusher Posted July 27, 2014 Share Posted July 27, 2014 I'm stuck on the stage in the video where you go to Chameleon Wizard and have to point it to the Chameleon i386 folder - where do I get that from? I assume I have to extract the Chameleon Folder? but how do I do that? Thanks in advance You gotta let you know where you are located binary folder i386 and install via chameleon wizard. Go to the Chameleon wizard/press to install/Folder to disk/select/serch your folder i386 on destination where they he is located/select folder i386/change target partition to your USB/and press install. Link to comment Share on other sites More sharing options...
Aide Posted July 27, 2014 Share Posted July 27, 2014 You gotta let you know where you are located binary folder i386 and install via chameleon wizard. Go to the Chameleon wizard/press to install/Folder to disk/select/serch your folder i386 on destination where they he is located/select folder i386/change target partition to your USB/and press install. Thanks for your reply...but I'm unable to find i386 Link to comment Share on other sites More sharing options...
Aide Posted July 27, 2014 Share Posted July 27, 2014 Thanks for your reply...but I'm unable to find i386 Can anyone please help??? Link to comment Share on other sites More sharing options...
AsusFreak Posted July 27, 2014 Author Share Posted July 27, 2014 You gotta let you know where you are located binary folder i386 and install via chameleon wizard. Go to the Chameleon wizard/press to install/Folder to disk/select/serch your folder i386 on destination where they he is located/select folder i386/change target partition to your USB/and press install. This has become way OT... Your video should be in a Chameleon thread... Link to comment Share on other sites More sharing options...
mrbonkers Posted July 28, 2014 Share Posted July 28, 2014 Hey could someone upload the yosemite base system.chunklist? thanks Link to comment Share on other sites More sharing options...
AsusFreak Posted July 28, 2014 Author Share Posted July 28, 2014 ok BaseSystem.chunklist.zip Link to comment Share on other sites More sharing options...
mrbonkers Posted July 28, 2014 Share Posted July 28, 2014 thanks a lot!! Link to comment Share on other sites More sharing options...
crusher Posted July 28, 2014 Share Posted July 28, 2014 This has become way OT... Your video should be in a Chameleon thread... I see that it is not for Chameleon,but perhaps it is easier for an over Chameleon. Sorry for the bad set message here. Thanks for your reply...but I'm unable to find i386 You go to this LINK Iz zip folder you have a i386. Link to comment Share on other sites More sharing options...
magnifico Posted July 28, 2014 Share Posted July 28, 2014 @ Snatch , how are you ? I remember your old nickname .. My sincere compliments to this script. But a small question to ask regarding the flag kext -dev-mode = 1, I knew that with the new rev of clover, you do not need more of this flag, you confirm that? 1 Link to comment Share on other sites More sharing options...
Aide Posted July 28, 2014 Share Posted July 28, 2014 I see that it is not for Chameleon,but perhaps it is easier for an over Chameleon. Sorry for the bad set message here. You go to this LINK Iz zip folder you have a i386. Thanks in advance but can you share your extra & kexts folders?? Thanks again Link to comment Share on other sites More sharing options...
AsusFreak Posted July 28, 2014 Author Share Posted July 28, 2014 @ Snatch , how are you ? I remember your old nickname .. My sincere compliments to this script. But a small question to ask regarding the flag kext -dev-mode = 1, I knew that with the new rev of clover, you do not need more of this flag, you confirm that? There was a conversation 'bout Clover adding it by default but I don't see any change log that says that happened... I assume it did not as you can remove the string and all is fine until you clear cache... Guess I'll test it again. EDIT: @magnifico, boots fine without it... 1 Link to comment Share on other sites More sharing options...
spang1974 Posted July 28, 2014 Share Posted July 28, 2014 Thanks for this. I managed to get the first step of the Installation done but after rebooting and booting to my USB, clover doesn't show the new Yosemite partition at all so I can't complete the installation Any ideas? DangerMouse76, I got the same issue. Im gonna try and reinstall?Did you ever get this fixed? Spang1974 Edit: Went ahead and reformatted the partition and reinstalled. That did the trick:) Yosemite now boots with absolutely no issues using standard Clover configuration. Have updated, and restarted several times without a hitch. Link to comment Share on other sites More sharing options...
AsusFreak Posted July 28, 2014 Author Share Posted July 28, 2014 DangerMouse76, I got the same issue. Im gonna try and reinstall?Did you ever get this fixed? Spang1974 "Boot USB to Clover, highlight your Install USB, hit the spacebar, choose “with injected kext” Install Yosemite. Boot to USB again and select your Yosemite HD or SSD "with injected kext" to complete the installation. install your kext to S/L/E. Install Clover to your boot drive. Done" Post a sceenie showing what you options you selected select when installing Clover to your HD. Link to comment Share on other sites More sharing options...
magnifico Posted July 28, 2014 Share Posted July 28, 2014 There was a conversation 'bout Clover adding it by default but I don't see any change log that says that happened... I assume it did not as you can remove the string and all is fine until you clear cache... Guess I'll test it again. EDIT: @magnifico, boots fine without it... I had no doubt about this, then it is useless to use that flag ...lol Link to comment Share on other sites More sharing options...
bob321654984 Posted July 30, 2014 Share Posted July 30, 2014 Any idea why my install is failing? It's complaining about the disk verify process. Log here: http://pastebin.com/7qsTG0Vj Trying to repair the disk in disk utility fails, File system check exit code 8... Link to comment Share on other sites More sharing options...
crusher Posted July 30, 2014 Share Posted July 30, 2014 Thanks for your reply...but I'm unable to find i386 Come to this LINK and question me. Link to comment Share on other sites More sharing options...
aww Posted July 30, 2014 Share Posted July 30, 2014 This Chameleon Version tested and working: Chameleon-2.2svn-r2391 I am posting this from Yosemite Public Beta on GA-EP43 with Q8400, ATI6450, chameleon r2391. plist: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>EthernetBuiltIn</key> <string>Yes</string> <key>GraphicsEnabler</key> <string>No</string> <key>Kernel</key> <string>/System/Library/Kernels/kernel</string> <key>Kernel Flags</key> <string>npci=0x2000, -v, -f , kext-dev-mode=1</string> <key>SMBIOS</key> <string>/Extra/SMBios.plist</string> <key>ShowInfo</key> <string>Yes</string> <key>Timeout</key> <string>9</string> </dict> </plist> Note: -v and -f has no effects. Link to comment Share on other sites More sharing options...
crusher Posted July 30, 2014 Share Posted July 30, 2014 This Chameleon Version tested and working: Chameleon-2.2svn-r2391 I am posting this from Yosemite Public Beta on GA-EP43 with Q8400, ATI6450, chameleon r2391. plist: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>EthernetBuiltIn</key> <string>Yes</string> <key>GraphicsEnabler</key> <string>No</string> <key>Kernel Flags</key> <string>npci=0x2000</string> <key>ShowInfo</key> <string>Yes</string> <key>Timeout</key> <string>9</string> </dict> </plist> Like this.... Link to comment Share on other sites More sharing options...
aww Posted July 31, 2014 Share Posted July 31, 2014 re: ekica simple plist, without kext-dev-mode=1, voodoohda will not be loaded, and some other kexts too. if you make some change to kexts, examples: testing different Audio/Nic Kexts, without -f, you will end in reboot loop. P.S. Chameleon still assume kernel is on root and named mach_kernel, <string>/System/Library/Kernels/kernel</string> is required, or, you can type this on boot. 1 Link to comment Share on other sites More sharing options...
Recommended Posts